[    0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:59 UTC 2021
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x000000009fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffefff]
[    0.000000] percpu: Embedded 28 pages/cpu s77536 r8192 d28960 u114688
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 120831
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 463316K/524284K available (12515K kernel code, 1902K rwdata, 2832K rodata, 456K init, 348K bss, 60968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x5e8/0x844 with crng_init=0
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467001645 ns
[    0.000109] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884271101ns
[    0.006188] Console: colour dummy device 80x25
[    0.006693] printk: console [tty0] enabled
[    0.007298] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:59 UTC 2021
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x000000009fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000009fffefff]
[    0.000000] percpu: Embedded 28 pages/cpu s77536 r8192 d28960 u114688
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 120831
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 463316K/524284K available (12515K kernel code, 1902K rwdata, 2832K rodata, 456K init, 348K bss, 60968K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] random: get_random_bytes called from start_kernel+0x5e8/0x844 with crng_init=0
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467001645 ns
[    0.000109] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884271101ns
[    0.006188] Console: colour dummy device 80x25
[    0.006693] printk: console [tty0] enabled
[    0.007298] printk: bootconsole [uart8250] disabled
[    0.011032] Calibrating delay loop... 984.67 BogoMIPS (lpj=4923392)
[    0.116170] pid_max: default: 32768 minimum: 301
[    0.117090] LSM: Security Framework initializing
[    0.118248] landlock: Up and running.
[    0.118850] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.118988] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.428850] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.429946] rcu: Hierarchical SRCU implementation.
[    0.436449] smp: Bringing up secondary CPUs ...
[    0.436584] smp: Brought up 1 node, 1 CPU
[    0.454633] devtmpfs: initialized
[    0.463354] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.463589] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.470229] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.705607] raid6: int64x8  gen()   447 MB/s
[    0.879279] raid6: int64x8  xor()   350 MB/s
[    1.049475] raid6: int64x4  gen()  1091 MB/s
[    1.222853] raid6: int64x4  xor()   625 MB/s
[    1.396547] raid6: int64x2  gen()  1363 MB/s
[    1.568104] raid6: int64x2  xor()   752 MB/s
[    1.740992] raid6: int64x1  gen()  1045 MB/s
[    1.914493] raid6: int64x1  xor()   612 MB/s
[    1.914640] raid6: using algorithm int64x2 gen() 1363 MB/s
[    1.914713] raid6: .... xor() 752 MB/s, rmw enabled
[    1.914844] raid6: using intx1 recovery algorithm
[    1.920784] vgaarb: loaded
[    1.922298] SCSI subsystem initialized
[    1.922966] usbcore: registered new interface driver usbfs
[    1.923311] usbcore: registered new interface driver hub
[    1.923548] usbcore: registered new device driver usb
[    1.935855] PCI host bridge to bus 0000:00
[    1.936204] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.936708] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.936911] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.938436] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.939235] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.939336] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.939416] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.939490] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.939579] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    2.086806] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    2.087573] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    2.087864] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    2.088020] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.088100] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.088199] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.088270] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.088671] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    2.088802] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    2.089513] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    2.090002] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    2.090158] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    2.090689] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    2.090783] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    2.090928] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    2.091008] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.091443] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    2.091823] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    2.091937] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    2.092096] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.092238] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    2.092585] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    2.092684] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    2.092773] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.093145] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    2.093245] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    2.093334] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.094022] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.095472] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    2.100452] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    2.100594] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    2.100801] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    2.100964] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    2.101062] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    2.101175] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    2.101284] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    2.101371] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    2.101446] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    2.101517] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    2.101578] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    2.104060] clocksource: Switched to clocksource MIPS
[    2.246080] NET: Registered PF_INET protocol family
[    2.247255] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.264705] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    2.264906] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.265169] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.265405] TCP: Hash tables configured (established 4096 bind 4096)
[    2.266701] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.266999] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.268885] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.272066] RPC: Registered named UNIX socket transport module.
[    2.272184] RPC: Registered udp transport module.
[    2.272241] RPC: Registered tcp transport module.
[    2.272290] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.273373] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.274616] PCI: CLS 0 bytes, default 32
[    2.700344] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    2.719653] NFS: Registering the id_resolver key type
[    2.720979] Key type id_resolver registered
[    2.721067] Key type id_legacy registered
[    2.723513] Key type cifs.idmap registered
[    2.758697] xor: measuring software checksum speed
[    2.764839]    8regs           :  1745 MB/sec
[    2.770760]    8regs_prefetch  :  1715 MB/sec
[    2.776579]    32regs          :  1770 MB/sec
[    2.782801]    32regs_prefetch :  1629 MB/sec
[    2.782897] xor: using function: 32regs (1770 MB/sec)
[    2.783208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.783407] io scheduler mq-deadline registered
[    2.783533] io scheduler kyber registered
[    2.786681] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.790072] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.791193] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.793318] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.799089] printk: console [ttyS0] disabled
[    2.823261] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.844527] printk: console [ttyS0] enabled
[    2.866846] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.867511] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.874050] random: fast init done
[    2.875537] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.876368] [drm] Found bochs VGA, ID 0xb0c5.
[    2.876569] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.881720] [drm] Found EDID data blob.
[    2.884399] random: crng init done
[    2.888278] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.961331] Console: switching to colour frame buffer device 128x48
[    2.973442] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drm frame buffer device
[    3.008007] brd: module loaded
[    3.016653] virtio_blk virtio2: [vda] 4567476 512-byte logical blocks (2.34 GB/2.18 GiB)
[    3.039871] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.040451] ehci-pci: EHCI PCI platform driver
[    3.041015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.041521] ohci-pci: OHCI PCI platform driver
[    3.046875] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.047950] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.052192] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    3.055654] usbcore: registered new interface driver usbhid
[    3.056071] usbhid: USB HID core driver
[    3.056906] u32 classifier
[    3.057183]     input device check on
[    3.057466]     Actions configured
[    3.059571] NET: Registered PF_INET6 protocol family
[    3.067790] Segment Routing with IPv6
[    3.068911] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.072064] NET: Registered PF_PACKET protocol family
[    3.073245] Bridge firewalling registered
[    3.076430] Key type dns_resolver registered
[    3.077305] NET: Registered PF_VSOCK protocol family
[    3.078924] Key type ._fscrypt registered
[    3.086943] Key type .fscrypt registered
[    3.092836] Key type fscrypt-provisioning registered
[    3.105420] Btrfs loaded, crc32c=crc32c-generic, zoned=no
[    3.141638] Key type encrypted registered
[    3.151250] printk: console [netcon0] enabled
[    3.160818] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.168454] netconsole: network logging started
[    3.805368] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.864181] IP-Config: Complete:
[    3.871896]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    3.890403]      host=192.168.7.4, domain=, nis-domain=(none)
[    3.896819]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.904933] md: Waiting for all devices to be available before autodetect
[    3.921371] md: If you don't use raid, use raid=noautodetect
[    3.927957] md: Autodetecting RAID arrays.
[    3.933786] md: autorun ...
[    3.938059] md: ... autorun DONE.
[    3.985788] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    3.993855] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.003691] devtmpfs: mounted
[    4.044083] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.053883] Freeing unused kernel image (initmem) memory: 456K
[    4.058224] This architecture does not have kernel memory protection.
[    4.062721] Run /sbin/init as init process
[    4.094698] process '/sbin/init.sysvinit' started with executable stack
[    6.650607] udevd[117]: starting version 3.2.10
[    6.750389] udevd[118]: starting eudev-3.2.10
[   18.684554] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
ALSA: Restoring mixer settings...
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting random number generator daemon.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.21.1.1
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.14.21-yocto-standard #1 SMP PREEMPT Mon Nov 29 01:17:59 UTC 2021 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 30 17:56:33 2021
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-Oavi5DHTqa,guid=e8fada5bdd20c68974ac94ee61cdf2d6
[A[122G[ ok ]
Starting Telephony daemon
Using calibration data stored in /etc/pointercal.xinput
No makedumpfile found.
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 3.4+snapshot-9b99eb9e361e730a3c1007d62475053835f6b155 qemumips64 ttyS0

qemumips64 login: [ 2150.492598] hellomod: loading out-of-tree module taints kernel.
[ 2150.502757] Hello world!
[ 2152.716168] Cleaning up hellomod.
