[ 0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (i686-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:48 UTC 2021 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1760 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] user-defined physical RAM map: [ 0.000000] user: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] user: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] user: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] user: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] user: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] user: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] user: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] user: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] user: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr b762001, primary cpu clock [ 0.000002] kvm-clock: using sched offset of 538004968 cycles [ 0.000008] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000015] tsc: Detected 2599.996 MHz processor [ 0.000951] last_pfn = 0x1ffd8 max_arch_pfn = 0x100000 [ 0.001003] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004755] found SMP MP-table at [mem 0x000f5b70-0x000f5b7f] [ 0.004807] ACPI: Early table checksum verification disabled [ 0.004825] ACPI: RSDP 0x00000000000F59A0 000014 (v00 BOCHS ) [ 0.004833] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004843] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004853] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004858] ACPI: FACS 0x000000001FFE0000 000040 [ 0.004871] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004876] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004881] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004885] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004889] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341] [ 0.004892] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d] [ 0.004893] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.004895] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1] [ 0.004896] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409] [ 0.004897] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445] [ 0.004899] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d] [ 0.004913] 0MB HIGHMEM available. [ 0.004914] 511MB LOWMEM available. [ 0.004915] mapped low ram: 0 - 1ffd8000 [ 0.004917] low ram: 0 - 1ffd8000 [ 0.004922] Zone ranges: [ 0.004925] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004929] Normal [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.004932] HighMem empty [ 0.004933] Movable zone start for each node [ 0.004934] Early memory node ranges [ 0.004935] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004937] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.004941] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.008165] Using APIC driver default [ 0.008648] ACPI: PM-Timer IO Port: 0x608 [ 0.008653] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.008657] Intel MultiProcessor Specification v1.4 [ 0.008659] Virtual Wire compatibility mode. [ 0.008662] MPTABLE: OEM ID: BOCHSCPU [ 0.008663] MPTABLE: Product ID: 0.1 [ 0.008665] MPTABLE: APIC at: 0xFEE00000 [ 0.008675] Processor #0 (Bootup-CPU) [ 0.008716] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.008721] Processors: 1 [ 0.008722] TSC deadline timer available [ 0.008724] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.008752] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.008754] Booting paravirtualized kernel on KVM [ 0.008758] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.008764] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.008806] percpu: Embedded 36 pages/cpu s115148 r0 d32308 u147456 [ 0.008836] kvm-guest: stealtime: cpu 0, msr 1fabfa00 [ 0.008839] Built 1 zonelists, mobility grouping on. Total pages: 129654 [ 0.008841] Kernel command line: root=/dev/vda rw clocksource=kvm-clock hpet=disable noapic nolapic mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.009154] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.009164] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.009813] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.009816] Initializing HighMem for node 0 (00000000:00000000) [ 0.010451] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010461] Memory: 496928K/523736K available (12022K kernel code, 1549K rwdata, 3100K rodata, 884K init, 540K bss, 26808K reserved, 0K cma-reserved, 0K highmem) [ 0.011038] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.011047] ftrace: allocating 43743 entries in 86 pages [ 0.030073] ftrace: allocated 86 pages with 4 groups [ 0.030118] trace event string verifier disabled [ 0.030684] rcu: Preemptible hierarchical RCU implementation. [ 0.030686] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.030688] All grace periods are expedited (rcu_expedited). [ 0.030689] Trampoline variant of Tasks RCU enabled. [ 0.030690] Rude variant of Tasks RCU enabled. [ 0.030691] Tracing variant of Tasks RCU enabled. [ 0.030693] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.030694] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.038093] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16 [ 0.038443] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.038496] random: get_random_bytes called from start_kernel+0x41d/0x597 with crng_init=0 [ 0.045548] Console: colour VGA+ 80x25 [ 0.158789] printk: console [ttyS0] enabled [ 0.159390] ACPI: Core revision 20210604 [ 0.159982] ACPI: setting ELCR to 0200 (from 0c00) [ 0.160667] APIC disabled via kernel command line [ 0.161373] APIC: Keep in PIC mode(8259) [ 0.161917] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.163362] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.164365] pid_max: default: 32768 minimum: 301 [ 0.165046] LSM: Security Framework initializing [ 0.165373] landlock: Up and running. [ 0.165898] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.166365] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.168706] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.169367] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.170191] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.171365] Spectre V2 : Mitigation: Full generic retpoline [ 0.172163] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.172366] Speculative Store Bypass: Vulnerable [ 0.173364] L1TF: Kernel not compiled for PAE. No mitigation for L1TF [ 0.174364] SRBDS: Unknown: Dependent on hypervisor status [ 0.175364] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.180738] Freeing SMP alternatives memory: 48K [ 0.181443] smpboot: SMP disabled [ 0.182061] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.183408] rcu: Hierarchical SRCU implementation. [ 0.184290] smp: Bringing up secondary CPUs ... [ 0.184367] smp: Brought up 1 node, 1 CPU [ 0.185365] smpboot: Max logical packages: 1 [ 0.185956] smpboot: Total of 1 processors activated (5199.99 BogoMIPS) [ 0.186457] devtmpfs: initialized [ 0.187895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.189366] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.190401] pinctrl core: initialized pinctrl subsystem [ 0.191495] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.192646] thermal_sys: Registered thermal governor 'step_wise' [ 0.192648] thermal_sys: Registered thermal governor 'user_space' [ 0.193396] cpuidle: using governor menu [ 0.195096] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.196374] ACPI: bus type PCI registered [ 0.197049] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.198368] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.199365] PCI: Using MMCONFIG for extended config space [ 0.200114] PCI: Using configuration type 1 for base access [ 0.202511] Kprobes globally optimized [ 0.221372] raid6: sse2x2 gen() 13160 MB/s [ 0.238398] raid6: sse2x2 xor() 7171 MB/s [ 0.255371] raid6: sse2x1 gen() 9810 MB/s [ 0.272365] raid6: sse2x1 xor() 6279 MB/s [ 0.289380] raid6: sse1x2 gen() 6511 MB/s [ 0.306367] raid6: sse1x1 gen() 5729 MB/s [ 0.307015] raid6: using algorithm sse2x2 gen() 13160 MB/s [ 0.307365] raid6: .... xor() 7171 MB/s, rmw enabled [ 0.308365] raid6: using ssse3x1 recovery algorithm [ 0.309143] ACPI: Added _OSI(Module Device) [ 0.309366] ACPI: Added _OSI(Processor Device) [ 0.310365] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.311018] ACPI: Added _OSI(Processor Aggregator Device) [ 0.311365] ACPI: Added _OSI(Linux-Dell-Video) [ 0.312366] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.313365] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.315168] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.317221] ACPI: Interpreter enabled [ 0.317381] ACPI: PM: (supports S0 S3 S5) [ 0.318365] ACPI: Using PIC for interrupt routing [ 0.319064] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.320459] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.323282] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.323371] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.325442] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.326423] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.327379] acpi resource window ([0x100000000-0x8ffffffff] ignored, not CPU addressable) [ 0.328404] PCI host bridge to bus 0000:00 [ 0.329366] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.330365] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.331365] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.332365] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.333365] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.334366] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.335433] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.336859] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 [ 0.339389] pci 0000:00:01.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 0.342944] pci 0000:00:01.0: reg 0x18: [mem 0xfebd0000-0xfebd0fff] [ 0.348835] pci 0000:00:01.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.350537] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 [ 0.352366] pci 0000:00:02.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.354878] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.359367] pci 0000:00:02.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref] [ 0.362166] pci 0000:00:02.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.365455] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 [ 0.367366] pci 0000:00:03.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.371133] pci 0000:00:03.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref] [ 0.373845] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.375983] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.378367] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.384367] pci 0000:00:04.0: reg 0x20: [mem 0xfe008000-0xfe00bfff 64bit pref] [ 0.388920] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.391547] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.393459] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.396263] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.397929] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.401697] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.403552] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.404796] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.408497] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.410840] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.412662] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.417371] random: fast init done [ 0.417886] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.419366] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.422733] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.425366] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.427550] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.428454] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.429451] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.430433] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.432468] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.433454] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.434435] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.435381] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.436264] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.436375] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.437376] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.438375] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.439374] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.440374] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.441375] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.442217] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.443524] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.444366] ACPI: Unable to map lapic to logical cpu number [ 0.445443] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x2 ignored. [ 0.446378] ACPI: Unable to map lapic to logical cpu number [ 0.447451] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x3 ignored. [ 0.448366] ACPI: Unable to map lapic to logical cpu number [ 0.449654] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.450362] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.451377] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.452366] vgaarb: loaded [ 0.453504] SCSI subsystem initialized [ 0.454144] ACPI: bus type USB registered [ 0.454394] usbcore: registered new interface driver usbfs [ 0.455381] usbcore: registered new interface driver hub [ 0.456167] usbcore: registered new device driver usb [ 0.456386] pps_core: LinuxPPS API ver. 1 registered [ 0.457369] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.458369] PTP clock support registered [ 0.459680] Bluetooth: Core ver 2.22 [ 0.460377] NET: Registered PF_BLUETOOTH protocol family [ 0.461117] Bluetooth: HCI device and connection manager initialized [ 0.461373] Bluetooth: HCI socket layer initialized [ 0.462366] Bluetooth: L2CAP socket layer initialized [ 0.463375] Bluetooth: SCO socket layer initialized [ 0.464113] PCI: Using ACPI for IRQ routing [ 0.536512] clocksource: Switched to clocksource kvm-clock [ 0.551551] pnp: PnP ACPI init [ 0.552296] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.553612] pnp: PnP ACPI: found 8 devices [ 0.615417] PM-Timer running at invalid rate: 158% of normal - aborting. [ 0.616331] NET: Registered PF_INET protocol family [ 0.616973] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.621509] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.622546] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.623458] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.624298] TCP: Hash tables configured (established 4096 bind 4096) [ 0.631437] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.632242] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.633111] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.637482] RPC: Registered named UNIX socket transport module. [ 0.638205] RPC: Registered udp transport module. [ 0.638774] RPC: Registered tcp transport module. [ 0.639326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.640099] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.640854] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.641596] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.643411] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.644245] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.649466] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.650788] ACPI: \_SB_.LNKA: Enabled at IRQ 10 [ 0.652122] ACPI: \_SB_.LNKB: Enabled at IRQ 10 [ 0.653374] ACPI: \_SB_.LNKC: Enabled at IRQ 11 [ 0.654619] ACPI: \_SB_.LNKD: Enabled at IRQ 11 [ 0.666464] PCI: CLS 0 bytes, default 64 [ 0.667340] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.672417] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.686314] Initialise system trusted keyrings [ 0.686978] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.689029] NFS: Registering the id_resolver key type [ 0.689682] Key type id_resolver registered [ 0.690183] Key type id_legacy registered [ 0.690795] Key type cifs.idmap registered [ 0.706432] xor: automatically using best checksumming function avx [ 0.707309] Key type asymmetric registered [ 0.707825] Asymmetric key parser 'x509' registered [ 0.708431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.709290] io scheduler mq-deadline registered [ 0.709874] io scheduler kyber registered [ 0.710575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.718436] ACPI: button: Power Button [PWRF] [ 0.719443] ACPI: \_SB_.LNKG: Enabled at IRQ 11 [ 0.721381] ACPI: \_SB_.LNKH: Enabled at IRQ 11 [ 0.723108] ACPI: \_SB_.LNKE: Enabled at IRQ 10 [ 0.726247] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.727183] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.728226] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.729276] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.730424] hpet_acpi_add: no address or irqs in _CRS [ 0.731361] Linux agpgart interface v0.103 [ 0.732114] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console [ 0.735044] Console: switching to colour dummy device 80x25 [ 0.735827] random: crng init done [ 0.736684] [drm] Found bochs VGA, ID 0xb0c5. [ 0.737224] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. [ 0.739272] [drm] Found EDID data blob. [ 0.739843] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:01.0 on minor 0 [ 0.741766] fbcon: bochs-drm (fb0) is primary device [ 0.746095] Console: switching to colour frame buffer device 128x48 [ 0.749288] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drm frame buffer device [ 0.751255] brd: module loaded [ 0.752927] loop: module loaded [ 0.772182] virtio_blk virtio2: [vda] 5253210 512-byte logical blocks (2.69 GB/2.50 GiB) [ 0.775223] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.776249] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.778135] scsi host0: ahci [ 0.778622] scsi host1: ahci [ 0.779045] scsi host2: ahci [ 0.779470] scsi host3: ahci [ 0.779888] scsi host4: ahci [ 0.780288] scsi host5: ahci [ 0.780702] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 10 [ 0.781586] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 10 [ 0.782465] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 10 [ 0.783333] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 10 [ 0.784220] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 10 [ 0.785089] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 10 [ 0.787388] e100: Intel(R) PRO/100 Network Driver [ 0.787987] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.788655] e1000: Intel(R) PRO/1000 Network Driver [ 0.789248] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.789947] e1000e: Intel(R) PRO/1000 Network Driver [ 0.790687] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.791434] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.792188] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.792899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.793741] ehci-pci: EHCI PCI platform driver [ 0.794789] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.795466] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.796499] ehci-pci 0000:00:1d.7: irq 11, io mem 0xfebd3000 [ 0.806099] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.807100] hub 1-0:1.0: USB hub found [ 0.807601] hub 1-0:1.0: 6 ports detected [ 0.808267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.809043] ohci-pci: OHCI PCI platform driver [ 0.809593] uhci_hcd: USB Universal Host Controller Interface driver [ 0.810787] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.811442] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.812413] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000c100 [ 0.813220] hub 2-0:1.0: USB hub found [ 0.813717] hub 2-0:1.0: 2 ports detected [ 0.814773] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.815490] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.816564] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000c120 [ 0.817389] hub 3-0:1.0: USB hub found [ 0.817905] hub 3-0:1.0: 2 ports detected [ 0.818957] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.819654] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.820676] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000c140 [ 0.821599] hub 4-0:1.0: USB hub found [ 0.822078] hub 4-0:1.0: 2 ports detected [ 0.822744] usbcore: registered new interface driver usb-storage [ 0.823507] usbcore: registered new interface driver usbserial_generic [ 0.824319] usbserial: USB Serial support registered for generic [ 0.825096] usbcore: registered new interface driver ftdi_sio [ 0.825910] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.826826] usbcore: registered new interface driver pl2303 [ 0.827516] usbserial: USB Serial support registered for pl2303 [ 0.828255] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.829848] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.830497] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.831154] mousedev: PS/2 mouse device common for all mice [ 0.832139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.834961] rtc_cmos 00:06: RTC can wake from S4 [ 0.836009] rtc_cmos 00:06: registered as rtc0 [ 0.836645] rtc_cmos 00:06: setting system clock to 2021-12-30T01:28:14 UTC (1640827694) [ 0.837612] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram [ 0.838677] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.839458] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.840136] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.841159] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 0.842239] intel_pstate: CPU model not supported [ 0.842829] sdhci: Secure Digital Host Controller Interface driver [ 0.843559] sdhci: Copyright(c) Pierre Ossman [ 0.844101] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.844861] usbcore: registered new interface driver usbhid [ 0.845533] usbhid: USB HID core driver [ 0.846006] u32 classifier [ 0.846328] input device check on [ 0.846779] Actions configured [ 0.847323] NET: Registered PF_INET6 protocol family [ 0.848188] Segment Routing with IPv6 [ 0.848690] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.849534] NET: Registered PF_PACKET protocol family [ 0.850173] Bridge firewalling registered [ 0.850714] Key type dns_resolver registered [ 0.851273] NET: Registered PF_VSOCK protocol family [ 0.852136] IPI shorthand broadcast: enabled [ 0.852698] sched_clock: Marking stable (729597869, 123080420)->(869774021, -17095732) [ 0.853696] Loading compiled-in X.509 certificates [ 0.854321] Key type ._fscrypt registered [ 0.854825] Key type .fscrypt registered [ 0.855285] Key type fscrypt-provisioning registered [ 0.856056] Btrfs loaded, crc32c=crc32c-generic, zoned=no [ 0.868508] Key type encrypted registered [ 0.869141] printk: console [netcon0] enabled [ 0.869704] netconsole: network logging started [ 1.043416] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.098392] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.100998] ata1: SATA link down (SStatus 0 SControl 300) [ 1.102946] ata2: SATA link down (SStatus 0 SControl 300) [ 1.104895] ata4: SATA link down (SStatus 0 SControl 300) [ 1.106855] ata6: SATA link down (SStatus 0 SControl 300) [ 1.109192] ata5: SATA link down (SStatus 0 SControl 300) [ 1.111156] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.112908] ata3.00: applying bridge limits [ 1.114633] ata3.00: configured for UDMA/100 [ 1.126924] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.144084] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.146142] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.191797] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.195402] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.459953] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 1.475511] IP-Config: Complete: [ 1.476624] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 1.479782] host=192.168.7.6, domain=, nis-domain=(none) [ 1.481500] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.482123] md: Waiting for all devices to be available before autodetect [ 1.486502] md: If you don't use raid, use raid=noautodetect [ 1.488248] md: Autodetecting RAID arrays. [ 1.489554] md: autorun ... [ 1.490439] md: ... autorun DONE. [ 1.495135] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 1.498074] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.500345] devtmpfs: mounted [ 1.503298] Freeing unused kernel image (initmem) memory: 884K [ 1.505147] Write protecting kernel text and read-only data: 15124k [ 1.507087] Run /sbin/init as init process INIT: version 3.01 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.623957] udevd[145]: starting version 3.2.10 [ 1.653627] udevd[146]: starting eudev-3.2.10 [ 2.914366] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting random number generator daemon. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.21.1.1 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86 5.14.21-yocto-standard #1 SMP PREEMPT Mon Nov 29 01:17:48 UTC 2021 i686 [ 3.797623] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.798282] Bluetooth: BNEP filters: protocol multicast [ 3.800405] Bluetooth: BNEP socket layer initialized Kernel command line: root=/dev/vda rw clocksource=kvm-clock hpet=disable noapic nolapic mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 30 01:28:17 2021 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting bluetooth: pci id for fd 12: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) failed to load driver: bochs-drm bluetoothd. D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-KcJd0Hccnf,guid=ad496138dab9eb1d75e9dad161cd0b31 Using calibration data stored in /etc/pointercal.xinput Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon Using calibration data stored in /etc/pointercal.xinput libGL error: pci id for fd 4: 1234:1111, driver (null) libGL error: MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) libGL error: failed to load driver: bochs-drm libGL error: pci id for fd 4: 1234:1111, driver (null) libGL error: MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) libGL error: failed to load driver: bochs-drm matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop libGL error: pci id for fd 4: 1234:1111, driver (null) libGL error: MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) libGL error: failed to load driver: bochs-drm libGL error: pci id for fd 4: 1234:1111, driver (null) libGL error: MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) libGL error: failed to load driver: bochs-drm Starting tcf-agent: OK dbus-daemon[632]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=653 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[632]: Successfully activated service 'org.a11y.atspi.Registry' matchbox-wm: X error warning (0xc00003): BadWindow (invalid Window parameter) (opcode: 12) SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry ** (matchbox-desktop:652): [1;33mWARNING[0m **: [34m01:28:19.310[0m: Error loading icon: Icon 'net-48d24' not present in theme Sato ** (matchbox-desktop:652): [1;33mWARNING[0m **: [34m01:28:19.340[0m: Error loading icon: Icon 'terminal' not present in theme Sato Poky (Yocto Project Reference Distro) 3.4+snapshot-9b99eb9e361e730a3c1007d62475053835f6b155 qemux86 ttyS0 qemux86 login: [ 120.416707] hellomod: loading out-of-tree module taints kernel. [ 120.418051] Hello world! [ 120.754980] Cleaning up hellomod. [ 171.789773] Kprobes globally unoptimized