[ 0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 20 pages/cpu s51408 r8192 d22320 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 239956K/262140K available (12743K kernel code, 1373K rwdata, 3384K rodata, 408K init, 620K bss, 22184K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x5bc/0x81c with crng_init=0 [ 0.000000] CPU frequency 333.33 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467730065 ns [ 0.000209] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12885090300ns [ 0.006091] Console: colour dummy device 80x25 [ 0.006675] printk: console [tty0] enabled [ 0.007303] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 20 pages/cpu s51408 r8192 d22320 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 239956K/262140K available (12743K kernel code, 1373K rwdata, 3384K rodata, 408K init, 620K bss, 22184K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x5bc/0x81c with crng_init=0 [ 0.000000] CPU frequency 333.33 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467730065 ns [ 0.000209] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12885090300ns [ 0.006091] Console: colour dummy device 80x25 [ 0.006675] printk: console [tty0] enabled [ 0.007303] printk: bootconsole [uart8250] disabled [ 0.011908] Calibrating delay loop... 1007.61 BogoMIPS (lpj=5038080) [ 0.052421] pid_max: default: 32768 minimum: 301 [ 0.053625] LSM: Security Framework initializing [ 0.054783] landlock: Up and running. [ 0.056838] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.057004] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.207664] Performance counters: No available PMU. [ 0.208911] rcu: Hierarchical SRCU implementation. [ 0.218386] smp: Bringing up secondary CPUs ... [ 0.218591] smp: Brought up 1 node, 1 CPU [ 0.390756] devtmpfs: initialized [ 0.402270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.402567] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.410789] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.900239] raid6: int32x8 gen() 113 MB/s [ 1.070904] raid6: int32x8 xor() 156 MB/s [ 1.246918] raid6: int32x4 gen() 570 MB/s [ 1.419360] raid6: int32x4 xor() 324 MB/s [ 1.595377] raid6: int32x2 gen() 632 MB/s [ 1.769473] raid6: int32x2 xor() 368 MB/s [ 1.941948] raid6: int32x1 gen() 495 MB/s [ 2.118002] raid6: int32x1 xor() 287 MB/s [ 2.118173] raid6: using algorithm int32x2 gen() 632 MB/s [ 2.118252] raid6: .... xor() 368 MB/s, rmw enabled [ 2.118402] raid6: using intx1 recovery algorithm [ 2.123832] vgaarb: loaded [ 2.125689] SCSI subsystem initialized [ 2.126502] usbcore: registered new interface driver usbfs [ 2.126901] usbcore: registered new interface driver hub [ 2.127204] usbcore: registered new device driver usb [ 2.245303] PCI host bridge to bus 0000:00 [ 2.245710] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.246294] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.246512] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.248188] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 2.497107] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.497240] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.497335] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.497421] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.497521] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.500510] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.501385] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.501714] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.501869] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.501967] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.502080] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.502177] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.503007] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.503229] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.504272] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.505204] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.505500] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.506939] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.507122] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.507408] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.507580] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.508456] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.509198] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.509382] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.509724] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.510004] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.510818] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.510994] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.511176] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.511958] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.512137] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.512318] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.513709] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.516177] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.516936] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.517200] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.517417] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.517733] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.517929] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.518172] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.518405] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.518583] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.518720] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.518883] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.519040] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.524263] clocksource: Switched to clocksource MIPS [ 3.183306] NET: Registered PF_INET protocol family [ 3.184555] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.204603] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 3.204879] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.205147] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.205355] TCP: Hash tables configured (established 2048 bind 2048) [ 3.206843] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.207257] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.209495] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.226892] RPC: Registered named UNIX socket transport module. [ 3.227053] RPC: Registered udp transport module. [ 3.227117] RPC: Registered tcp transport module. [ 3.227172] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.228322] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 3.229225] PCI: CLS 0 bytes, default 16 [ 3.763388] random: fast init done [ 3.898860] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.918379] NFS: Registering the id_resolver key type [ 3.919855] Key type id_resolver registered [ 3.919974] Key type id_legacy registered [ 3.923489] Key type cifs.idmap registered [ 4.125462] xor: measuring software checksum speed [ 4.137982] 8regs : 860 MB/sec [ 4.155592] 8regs_prefetch : 809 MB/sec [ 4.174073] 32regs : 791 MB/sec [ 4.186959] 32regs_prefetch : 800 MB/sec [ 4.187157] xor: using function: 8regs (860 MB/sec) [ 4.187640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.187880] io scheduler mq-deadline registered [ 4.188015] io scheduler kyber registered [ 4.191922] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 4.196062] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 4.197208] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 4.199900] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.209302] printk: console [ttyS0] disabled [ 4.233708] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.264365] printk: console [ttyS0] enabled [ 4.297611] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.299136] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 4.315117] random: crng init done [ 4.317199] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 4.318543] [drm] Found bochs VGA, ID 0xb0c5. [ 4.318881] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 4.409900] [drm] Found EDID data blob. [ 4.422686] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 5.305722] Console: switching to colour frame buffer device 128x48 [ 5.347944] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drm frame buffer device [ 5.421146] brd: module loaded [ 5.437270] virtio_blk virtio2: [vda] 953840 512-byte logical blocks (488 MB/466 MiB) [ 5.608890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.609809] ehci-pci: EHCI PCI platform driver [ 5.610668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.611483] ohci-pci: OHCI PCI platform driver [ 5.612330] uhci_hcd: USB Universal Host Controller Interface driver [ 5.615668] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 5.625776] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 5.636183] uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001040 [ 5.655495] hub 1-0:1.0: USB hub found [ 5.662575] hub 1-0:1.0: 2 ports detected [ 5.686542] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.689062] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.707017] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 5.714708] usbcore: registered new interface driver usbhid [ 5.715696] usbhid: USB HID core driver [ 5.717376] u32 classifier [ 5.717943] input device check on [ 5.718519] Actions configured [ 5.722848] NET: Registered PF_INET6 protocol family [ 5.740491] Segment Routing with IPv6 [ 5.762329] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.796492] NET: Registered PF_PACKET protocol family [ 6.086337] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 6.113917] Bridge firewalling registered [ 6.135717] Key type dns_resolver registered [ 6.148545] NET: Registered PF_VSOCK protocol family [ 6.169353] Key type ._fscrypt registered [ 6.189575] Key type .fscrypt registered [ 6.210017] Key type fscrypt-provisioning registered [ 6.241101] Btrfs loaded, crc32c=crc32c-generic, zoned=no [ 6.274597] Key type encrypted registered [ 6.282761] printk: console [netcon0] enabled [ 6.289639] netconsole: network logging started [ 6.443793] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 6.764978] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 6.802333] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 6.809473] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 6.970320] IP-Config: Complete: [ 6.980899] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 6.990843] host=192.168.7.6, domain=, nis-domain=(none) [ 7.008299] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.189982] md: Waiting for all devices to be available before autodetect [ 7.210061] md: If you don't use raid, use raid=noautodetect [ 7.219644] md: Autodetecting RAID arrays. [ 7.231955] md: autorun ... [ 7.253438] md: ... autorun DONE. [ 7.313539] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 7.323657] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.339935] devtmpfs: mounted [ 7.537852] Freeing unused kernel image (initmem) memory: 408K [ 7.547535] This architecture does not have kernel memory protection. [ 7.557159] Run /sbin/init as init process [ 7.657132] process '/sbin/init.sysvinit' started with executable stack [ 11.661335] udevd[117]: starting version 3.2.10 [ 11.851342] udevd[118]: starting eudev-3.2.10 [ 24.775698] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.21.1.1 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 5.14.21-yocto-standard #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 mips Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 31 12:49:25 2021 (==) Using system config directory "/usr/share/X11/xorg.conf.d" dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 3.4+snapshot-9b99eb9e361e730a3c1007d62475053835f6b155 qemumips /dev/ttyS0 qemumips login: