[ 0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 20 pages/cpu s51408 r8192 d22320 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 239956K/262140K available (12743K kernel code, 1373K rwdata, 3384K rodata, 408K init, 620K bss, 22184K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x5bc/0x81c with crng_init=0 [ 0.000000] CPU frequency 333.36 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466675137 ns [ 0.000417] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12883904509ns [ 0.035558] Console: colour dummy device 80x25 [ 0.040650] printk: console [tty0] enabled [ 0.042359] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.14.21-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 11.2.0, GNU ld (GNU Binutils) 2.37.20210721) #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 20 pages/cpu s51408 r8192 d22320 u81920 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 239956K/262140K available (12743K kernel code, 1373K rwdata, 3384K rodata, 408K init, 620K bss, 22184K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x5bc/0x81c with crng_init=0 [ 0.000000] CPU frequency 333.36 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466675137 ns [ 0.000417] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12883904509ns [ 0.035558] Console: colour dummy device 80x25 [ 0.040650] printk: console [tty0] enabled [ 0.042359] printk: bootconsole [uart8250] disabled [ 0.046402] Calibrating delay loop... 852.78 BogoMIPS (lpj=4263936) [ 0.084926] pid_max: default: 32768 minimum: 301 [ 0.086713] LSM: Security Framework initializing [ 0.088733] landlock: Up and running. [ 0.092276] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.092576] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.169185] Performance counters: No available PMU. [ 0.171270] rcu: Hierarchical SRCU implementation. [ 0.185956] smp: Bringing up secondary CPUs ... [ 0.186281] smp: Brought up 1 node, 1 CPU [ 0.209379] devtmpfs: initialized [ 0.227039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.227511] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.241458] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.577600] raid6: int32x8 gen() 111 MB/s [ 0.750943] raid6: int32x8 xor() 81 MB/s [ 0.926015] raid6: int32x4 gen() 278 MB/s [ 1.100549] raid6: int32x4 xor() 153 MB/s [ 1.275387] raid6: int32x2 gen() 388 MB/s [ 1.448225] raid6: int32x2 xor() 177 MB/s [ 1.625593] raid6: int32x1 gen() 291 MB/s [ 1.798727] raid6: int32x1 xor() 155 MB/s [ 1.798979] raid6: using algorithm int32x2 gen() 388 MB/s [ 1.799105] raid6: .... xor() 177 MB/s, rmw enabled [ 1.799337] raid6: using intx1 recovery algorithm [ 1.808352] vgaarb: loaded [ 1.811419] SCSI subsystem initialized [ 1.812649] usbcore: registered new interface driver usbfs [ 1.813283] usbcore: registered new interface driver hub [ 1.813736] usbcore: registered new device driver usb [ 1.839033] PCI host bridge to bus 0000:00 [ 1.839704] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.840720] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.841079] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.844837] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.846350] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.846539] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.846694] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.846843] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.847015] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.851806] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.853472] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.854036] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.854275] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.854428] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.854611] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.854758] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.855573] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.855803] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.856909] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.857856] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.858138] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.859246] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.859415] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.859673] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.859842] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.860649] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.861374] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.861562] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.861897] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.862178] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.863211] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.863395] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.863574] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.864331] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.864507] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.864683] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.866050] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.868720] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.869351] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.869600] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.869802] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.870095] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.870280] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.870500] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.870719] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.870883] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.871008] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.871150] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.871292] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.876550] clocksource: Switched to clocksource MIPS [ 2.212189] NET: Registered PF_INET protocol family [ 2.214186] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.243648] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 2.244067] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.244515] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.244850] TCP: Hash tables configured (established 2048 bind 2048) [ 2.247963] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.248558] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.252261] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.270896] RPC: Registered named UNIX socket transport module. [ 2.271143] RPC: Registered udp transport module. [ 2.271236] RPC: Registered tcp transport module. [ 2.271338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.273335] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.274799] PCI: CLS 0 bytes, default 16 [ 2.605847] random: fast init done [ 3.307131] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.338831] NFS: Registering the id_resolver key type [ 3.342133] Key type id_resolver registered [ 3.342344] Key type id_legacy registered [ 3.347705] Key type cifs.idmap registered [ 3.686057] xor: measuring software checksum speed [ 3.710296] 8regs : 421 MB/sec [ 3.734921] 8regs_prefetch : 416 MB/sec [ 3.759271] 32regs : 414 MB/sec [ 3.785039] 32regs_prefetch : 402 MB/sec [ 3.785325] xor: using function: 8regs (421 MB/sec) [ 3.786311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 3.786711] io scheduler mq-deadline registered [ 3.786947] io scheduler kyber registered [ 3.792830] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.799656] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.801549] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.805326] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.818628] printk: console [ttyS0] disabled [ 3.848326] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.897318] printk: console [ttyS0] enabled [ 3.920309] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.921763] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.937446] random: crng init done [ 3.941082] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.942581] [drm] Found bochs VGA, ID 0xb0c5. [ 3.942966] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.951915] [drm] Found EDID data blob. [ 3.963425] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 4.043499] Console: switching to colour frame buffer device 128x48 [ 4.066627] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drm frame buffer device [ 4.114521] brd: module loaded [ 4.123667] virtio_blk virtio2: [vda] 954006 512-byte logical blocks (488 MB/466 MiB) [ 4.170358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.171467] ehci-pci: EHCI PCI platform driver [ 4.172635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.173674] ohci-pci: OHCI PCI platform driver [ 4.174787] uhci_hcd: USB Universal Host Controller Interface driver [ 4.178366] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 4.181524] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 4.183961] uhci_hcd 0000:00:0a.2: irq 11, io base 0x00001040 [ 4.202240] hub 1-0:1.0: USB hub found [ 4.204433] hub 1-0:1.0: 2 ports detected [ 4.218876] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.221346] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.238346] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 4.244894] usbcore: registered new interface driver usbhid [ 4.251935] usbhid: USB HID core driver [ 4.253576] u32 classifier [ 4.254113] input device check on [ 4.259291] Actions configured [ 4.263894] NET: Registered PF_INET6 protocol family [ 4.281271] Segment Routing with IPv6 [ 4.307528] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.335193] NET: Registered PF_PACKET protocol family [ 4.360330] Bridge firewalling registered [ 4.385670] Key type dns_resolver registered [ 4.422613] NET: Registered PF_VSOCK protocol family [ 4.447478] Key type ._fscrypt registered [ 4.473291] Key type .fscrypt registered [ 4.496042] Key type fscrypt-provisioning registered [ 4.522435] Btrfs loaded, crc32c=crc32c-generic, zoned=no [ 4.542922] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 4.608388] Key type encrypted registered [ 4.634843] printk: console [netcon0] enabled [ 4.661560] netconsole: network logging started [ 4.848527] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 [ 4.860708] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 4.887511] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 4.956192] IP-Config: Complete: [ 4.965629] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 4.973203] host=192.168.7.2, domain=, nis-domain=(none) [ 4.988595] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.017349] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 5.033173] md: Waiting for all devices to be available before autodetect [ 5.046340] md: If you don't use raid, use raid=noautodetect [ 5.052629] md: Autodetecting RAID arrays. [ 5.064348] md: autorun ... [ 5.074038] md: ... autorun DONE. [ 5.144220] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 5.170585] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.190869] devtmpfs: mounted [ 5.205851] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.284250] Freeing unused kernel image (initmem) memory: 408K [ 5.294364] This architecture does not have kernel memory protection. [ 5.304206] Run /sbin/init as init process [ 5.340038] process '/sbin/init.sysvinit' started with executable stack [ 8.614915] udevd[117]: starting version 3.2.10 [ 8.750888] udevd[118]: starting eudev-3.2.10 [ 26.564554] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.21.1.1 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 5.14.21-yocto-standard #1 SMP PREEMPT Mon Nov 29 01:17:58 UTC 2021 mips Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 31 09:14:07 2021 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 3.4+snapshot-768e09f026ff411314185328626b700ee27a4a79 qemumips /dev/ttyS0 qemumips login: