[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002ffd8000-0x000000002fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 513144972 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000008] tsc: Detected 2599.996 MHz processor
[    0.001237] last_pfn = 0x2ffd8 max_arch_pfn = 0x400000000
[    0.001277] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011675] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.011804] ACPI: Early table checksum verification disabled
[    0.011818] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.011826] ACPI: RSDT 0x000000002FFE2403 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011838] ACPI: FACP 0x000000002FFE21E3 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011845] ACPI: DSDT 0x000000002FFE0040 0021A3 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011850] ACPI: FACS 0x000000002FFE0000 000040
[    0.011854] ACPI: APIC 0x000000002FFE22D7 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011858] ACPI: HPET 0x000000002FFE2367 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011862] ACPI: MCFG 0x000000002FFE239F 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011867] ACPI: WAET 0x000000002FFE23DB 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011870] ACPI: Reserving FACP table memory at [mem 0x2ffe21e3-0x2ffe22d6]
[    0.011872] ACPI: Reserving DSDT table memory at [mem 0x2ffe0040-0x2ffe21e2]
[    0.011873] ACPI: Reserving FACS table memory at [mem 0x2ffe0000-0x2ffe003f]
[    0.011873] ACPI: Reserving APIC table memory at [mem 0x2ffe22d7-0x2ffe2366]
[    0.011874] ACPI: Reserving HPET table memory at [mem 0x2ffe2367-0x2ffe239e]
[    0.011875] ACPI: Reserving MCFG table memory at [mem 0x2ffe239f-0x2ffe23da]
[    0.011876] ACPI: Reserving WAET table memory at [mem 0x2ffe23db-0x2ffe2402]
[    0.011928] Zone ranges:
[    0.011929]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011931]   DMA32    [mem 0x0000000001000000-0x000000002ffd7fff]
[    0.011933]   Normal   empty
[    0.011934] Movable zone start for each node
[    0.011935] Early memory node ranges
[    0.011935]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.011937]   node   0: [mem 0x0000000000100000-0x000000002ffd7fff]
[    0.011938] Initmem setup node 0 [mem 0x0000000000001000-0x000000002ffd7fff]
[    0.012464] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012483] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.015925] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.020283] ACPI: PM-Timer IO Port: 0x608
[    0.020296] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.020341] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.020345] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.020347] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.020348] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.020353] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.020354] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.020360] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.020361] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.020365] TSC deadline timer available
[    0.020366] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.020395] [mem 0x30000000-0xafffffff] available for PCI devices
[    0.020397] Booting paravirtualized kernel on KVM
[    0.020401] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.020406] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.021106] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.021146] Built 1 zonelists, mobility grouping on.  Total pages: 193240
[    0.021148] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.021380] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.021460] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.022157] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.024026] Memory: 739480K/785880K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 46140K reserved, 0K cma-reserved)
[    0.024087] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.024095] Kernel/User page tables isolation: enabled
[    0.024110] ftrace: allocating 47075 entries in 184 pages
[    0.036699] ftrace: allocated 184 pages with 4 groups
[    0.036749] Dynamic Preempt: full
[    0.037280] rcu: Preemptible hierarchical RCU implementation.
[    0.037280] rcu: 	RCU event tracing is enabled.
[    0.037281] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.037283] 	All grace periods are expedited (rcu_expedited).
[    0.037283] 	Trampoline variant of Tasks RCU enabled.
[    0.037284] 	Rude variant of Tasks RCU enabled.
[    0.037285] 	Tracing variant of Tasks RCU enabled.
[    0.037286] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.037287] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.042552] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.042723] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.042842] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.042858] random: crng init done
[    0.050870] Console: colour VGA+ 80x25
[    0.177046] printk: console [ttyS0] enabled
[    0.177742] ACPI: Core revision 20220331
[    0.178540] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.180222] APIC: Switch to symmetric I/O mode setup
[    0.181408] x2apic enabled
[    0.182251] Switched APIC routing to physical x2apic.
[    0.184495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.185559] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.187381] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.188382] pid_max: default: 32768 minimum: 301
[    0.189403] LSM: Security Framework initializing
[    0.190391] landlock: Up and running.
[    0.191383] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.192384] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.193699] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.194384] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.195383] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.196383] Spectre V2 : Mitigation: Retpolines
[    0.197382] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.198382] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.199382] Speculative Store Bypass: Vulnerable
[    0.200386] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.201382] MMIO Stale Data: Unknown: No mitigations
[    0.202382] SRBDS: Unknown: Dependent on hypervisor status
[    0.223606] Freeing SMP alternatives memory: 52K
[    0.224518] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.225520] cblist_init_generic: Setting adjustable number of callback queues.
[    0.226383] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.227404] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.228404] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.229402] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.230427] rcu: Hierarchical SRCU implementation.
[    0.231384] rcu: 	Max phase no-delay instances is 400.
[    0.232480] smp: Bringing up secondary CPUs ...
[    0.233303] x86: Booting SMP configuration:
[    0.233385] .... node  #0, CPUs:      #1 #2 #3
[    0.234782] smp: Brought up 1 node, 4 CPUs
[    0.236107] smpboot: Max logical packages: 1
[    0.236384] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.238435] devtmpfs: initialized
[    0.239440] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.240392] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.241413] pinctrl core: initialized pinctrl subsystem
[    0.243094] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.243513] thermal_sys: Registered thermal governor 'step_wise'
[    0.243515] thermal_sys: Registered thermal governor 'user_space'
[    0.244425] cpuidle: using governor menu
[    0.248712] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.251393] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.254416] PCI: Using configuration type 1 for base access
[    0.261434] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.278901] raid6: sse2x4   gen() 12644 MB/s
[    0.295572] raid6: sse2x2   gen() 13354 MB/s
[    0.312576] raid6: sse2x1   gen() 10015 MB/s
[    0.313295] raid6: using algorithm sse2x2 gen() 13354 MB/s
[    0.330681] raid6: .... xor() 7694 MB/s, rmw enabled
[    0.331385] raid6: using ssse3x2 recovery algorithm
[    0.332277] ACPI: Added _OSI(Module Device)
[    0.333387] ACPI: Added _OSI(Processor Device)
[    0.334387] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.335385] ACPI: Added _OSI(Processor Aggregator Device)
[    0.336386] ACPI: Added _OSI(Linux-Dell-Video)
[    0.337185] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.338386] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.340466] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.343725] ACPI: Interpreter enabled
[    0.344200] ACPI: PM: (supports S0 S3 S5)
[    0.344387] ACPI: Using IOAPIC for interrupt routing
[    0.345238] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.347385] PCI: Using E820 reservations for host bridge windows
[    0.349499] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.352941] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.354391] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.355433] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.357500] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.359440] PCI host bridge to bus 0000:00
[    0.360286] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.361386] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.362385] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.363385] pci_bus 0000:00: root bus resource [mem 0x30000000-0xafffffff window]
[    0.364388] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.366385] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.367385] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.368454] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.370126] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.373370] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.376385] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.385386] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.388385] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.390228] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.392337] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.397385] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.400052] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.403090] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.423072] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.425409] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.429412] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.430484] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.434373] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.436385] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.438083] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.444058] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.447369] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.453709] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.455478] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.459384] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.461271] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.465384] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.467385] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.468807] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.472794] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.473957] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.476683] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.482766] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.484100] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.488572] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.491385] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.493555] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.494480] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.495472] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.497482] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.498473] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.499471] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.500471] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.501472] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.502424] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.503374] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.504394] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.505395] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.506359] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.508395] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.509393] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.510341] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.511867] SCSI subsystem initialized
[    0.512520] ACPI: bus type USB registered
[    0.513414] usbcore: registered new interface driver usbfs
[    0.514402] usbcore: registered new interface driver hub
[    0.515256] usbcore: registered new device driver usb
[    0.516403] pps_core: LinuxPPS API ver. 1 registered
[    0.517179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.518389] PTP clock support registered
[    0.519456] Bluetooth: Core ver 2.22
[    0.520059] NET: Registered PF_BLUETOOTH protocol family
[    0.520384] Bluetooth: HCI device and connection manager initialized
[    0.521364] Bluetooth: HCI socket layer initialized
[    0.522386] Bluetooth: L2CAP socket layer initialized
[    0.523165] Bluetooth: SCO socket layer initialized
[    0.524404] PCI: Using ACPI for IRQ routing
[    0.601137] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.601364] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.601380] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.604386] vgaarb: loaded
[    0.604866] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.605384] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.609512] clocksource: Switched to clocksource kvm-clock
[    0.610454] pnp: PnP ACPI init
[    0.611140] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.612529] pnp: PnP ACPI: found 6 devices
[    0.620031] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.621439] NET: Registered PF_INET protocol family
[    0.622269] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.624045] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.625409] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.627902] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.629104] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.630210] TCP: Hash tables configured (established 8192 bind 8192)
[    0.631231] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.632275] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.633415] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.634714] RPC: Registered named UNIX socket transport module.
[    0.635654] RPC: Registered udp transport module.
[    0.636396] RPC: Registered tcp transport module.
[    0.637136] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.638120] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.639069] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.640012] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.641079] pci_bus 0000:00: resource 7 [mem 0x30000000-0xafffffff window]
[    0.642121] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.643173] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.644597] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.646425] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.647994] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.649564] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.651101] PCI: CLS 0 bytes, default 64
[    0.652047] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.653418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.656026] Initialise system trusted keyrings
[    0.656939] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.670454] NFS: Registering the id_resolver key type
[    0.671279] Key type id_resolver registered
[    0.671957] Key type id_legacy registered
[    0.673246] Key type cifs.idmap registered
[    0.685169] xor: automatically using best checksumming function   avx       
[    0.686276] Key type asymmetric registered
[    0.686912] Asymmetric key parser 'x509' registered
[    0.687678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.690546] io scheduler mq-deadline registered
[    0.691252] io scheduler kyber registered
[    0.692433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.694590] ACPI: button: Power Button [PWRF]
[    0.697346] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.702083] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.706679] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.711299] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.715307] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.717804] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.721803] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.724709] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.728946] Linux agpgart interface v0.103
[    0.730663] ACPI: bus type drm_connector registered
[    0.732626] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.734503] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.759017] Console: switching to colour dummy device 80x25
[    0.761221] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.761225] [drm] features: -context_init
[    0.764266] [drm] number of scanouts: 1
[    0.764976] [drm] number of cap sets: 0
[    0.766644] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.772629] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.799208] Console: switching to colour frame buffer device 160x50
[    0.827599] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.835062] brd: module loaded
[    0.838575] loop: module loaded
[    0.839987] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.845148] virtio_blk virtio3: [vda] 4145548 512-byte logical blocks (2.12 GB/1.98 GiB)
[    0.852105] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.854926] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.859856] scsi host0: ahci
[    0.861429] scsi host1: ahci
[    0.863021] scsi host2: ahci
[    0.864559] scsi host3: ahci
[    0.866088] scsi host4: ahci
[    0.867627] scsi host5: ahci
[    0.868779] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.871268] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.873716] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.876141] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.878500] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.880761] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.885808] e100: Intel(R) PRO/100 Network Driver
[    0.887132] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.888601] e1000: Intel(R) PRO/1000 Network Driver
[    0.889910] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.891473] e1000e: Intel(R) PRO/1000 Network Driver
[    0.892794] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.894374] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.895785] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.897308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.898966] ehci-pci: EHCI PCI platform driver
[    0.901117] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.902430] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.904499] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.912498] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.914116] hub 1-0:1.0: USB hub found
[    0.915071] hub 1-0:1.0: 6 ports detected
[    0.916458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.927680] ohci-pci: OHCI PCI platform driver
[    0.928820] uhci_hcd: USB Universal Host Controller Interface driver
[    0.931379] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.932745] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.934793] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.936834] hub 2-0:1.0: USB hub found
[    0.937906] hub 2-0:1.0: 2 ports detected
[    0.940079] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.941882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.944229] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.946341] hub 3-0:1.0: USB hub found
[    0.947436] hub 3-0:1.0: 2 ports detected
[    0.949673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.951179] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.953594] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.955438] hub 4-0:1.0: USB hub found
[    0.956470] hub 4-0:1.0: 2 ports detected
[    0.957822] usbcore: registered new interface driver usb-storage
[    0.959452] usbcore: registered new interface driver usbserial_generic
[    0.961310] usbserial: USB Serial support registered for generic
[    0.962849] usbcore: registered new interface driver ftdi_sio
[    0.964294] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.966090] usbcore: registered new interface driver pl2303
[    0.967436] usbserial: USB Serial support registered for pl2303
[    0.968852] i8042: PNP: No PS/2 controller found.
[    0.970100] mousedev: PS/2 mouse device common for all mice
[    0.971677] rtc_cmos 00:04: RTC can wake from S4
[    0.973606] rtc_cmos 00:04: registered as rtc0
[    0.974646] rtc_cmos 00:04: setting system clock to 2023-01-02T15:54:19 UTC (1672674859)
[    0.976432] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.978409] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.979713] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.980884] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.983042] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.984971] intel_pstate: CPU model not supported
[    0.986015] sdhci: Secure Digital Host Controller Interface driver
[    0.987280] sdhci: Copyright(c) Pierre Ossman
[    0.988186] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.989565] usbcore: registered new interface driver usbhid
[    0.990740] usbhid: USB HID core driver
[    0.991609] u32 classifier
[    0.992368]     input device check on
[    0.993074]     Actions configured
[    0.993899] NET: Registered PF_INET6 protocol family
[    0.995585] Segment Routing with IPv6
[    0.996322] In-situ OAM (IOAM) with IPv6
[    0.997127] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.998411] NET: Registered PF_PACKET protocol family
[    0.999429] Bridge firewalling registered
[    1.000214] Key type dns_resolver registered
[    1.001198] NET: Registered PF_VSOCK protocol family
[    1.002788] IPI shorthand broadcast: enabled
[    1.003649] sched_clock: Marking stable (862958804, 140651450)->(1025790335, -22180081)
[    1.005407] Loading compiled-in X.509 certificates
[    1.006654] Key type ._fscrypt registered
[    1.007460] Key type .fscrypt registered
[    1.008178] Key type fscrypt-provisioning registered
[    1.009459] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    1.011784] Key type encrypted registered
[    1.015475] printk: console [netcon0] enabled
[    1.016263] netconsole: network logging started
[    1.152473] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.191535] ata1: SATA link down (SStatus 0 SControl 300)
[    1.193746] ata2: SATA link down (SStatus 0 SControl 300)
[    1.195970] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.198491] ata4: SATA link down (SStatus 0 SControl 300)
[    1.200703] ata5: SATA link down (SStatus 0 SControl 300)
[    1.202878] ata6: SATA link down (SStatus 0 SControl 300)
[    1.204830] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.206839] ata3.00: applying bridge limits
[    1.208613] ata3.00: configured for UDMA/100
[    1.210939] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.249163] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.251456] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.283486] IP-Config: Complete:
[    1.284661]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    1.288685]      host=192.168.7.10, domain=, nis-domain=(none)
[    1.290856] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.291165]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.295256]      nameserver0=8.8.8.8
[    1.295608] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.297822] 
[    1.304560] md: Waiting for all devices to be available before autodetect
[    1.306455] md: If you don't use raid, use raid=noautodetect
[    1.307867] md: Autodetecting RAID arrays.
[    1.308808] md: autorun ...
[    1.309478] md: ... autorun DONE.
[    1.312984] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.315061] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.316756] devtmpfs: mounted
[    1.320852] Freeing unused kernel image (initmem) memory: 1936K
[    1.322485] Write protecting the kernel read-only data: 22528k
[    1.326927] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.328774] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.330401] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.419477] usb 1-2: new high-speed USB device number 3 using ehci-pci
Starting udev
[    1.484255] udevd[172]: starting version 3.2.11
[    1.499171] udevd[173]: starting eudev-3.2.11
[    1.566657] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.621612] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.696337] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.942490] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  2 15:54:22 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
[    4.433744] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.435390] Bluetooth: BNEP filters: protocol multicast
[    4.436773] Bluetooth: BNEP socket layer initialized
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-ZV3TWEqeGk,guid=8714095dc595996a349a17f163b2fe30
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[746]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=743 comm="matchbox-desktop")
dbus-daemon[746]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

Poky (Yocto Project Reference Distro) 4.1.1 qemux86-64 ttyS0

qemux86-64 login: matchbox-wm: X error warning (0xc00003): BadWindow (invalid Window parameter) (opcode: 12)
[  146.424500] hellomod: loading out-of-tree module taints kernel.
[  146.427618] Hello world!
[  146.900081] Cleaning up hellomod.
