[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 335948292 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000006] tsc: Detected 2599.996 MHz processor [ 0.000936] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.000968] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008731] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.008903] ACPI: Early table checksum verification disabled [ 0.008914] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.008920] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008929] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008935] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008939] ACPI: FACS 0x000000001FFE0000 000040 [ 0.008942] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008945] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008949] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008952] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008955] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df] [ 0.008956] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb] [ 0.008957] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.008958] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f] [ 0.008959] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7] [ 0.008959] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3] [ 0.008960] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b] [ 0.009003] Zone ranges: [ 0.009003] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009005] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.009007] Normal empty [ 0.009008] Movable zone start for each node [ 0.009008] Early memory node ranges [ 0.009009] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.009010] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.009011] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.009466] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009481] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.011301] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.011793] ACPI: PM-Timer IO Port: 0x608 [ 0.011803] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.011835] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.011839] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.011841] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.011842] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.011843] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.011844] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.011848] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.011849] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.011852] TSC deadline timer available [ 0.011853] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.011879] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.011880] Booting paravirtualized kernel on KVM [ 0.011882] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.011885] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.012516] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.012548] Built 1 zonelists, mobility grouping on. Total pages: 128727 [ 0.012550] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.012685] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.012729] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.013354] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014562] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved) [ 0.014610] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014617] Kernel/User page tables isolation: enabled [ 0.014628] ftrace: allocating 47075 entries in 184 pages [ 0.024114] ftrace: allocated 184 pages with 4 groups [ 0.024171] Dynamic Preempt: full [ 0.024642] rcu: Preemptible hierarchical RCU implementation. [ 0.024642] rcu: RCU event tracing is enabled. [ 0.024643] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.024644] All grace periods are expedited (rcu_expedited). [ 0.024645] Trampoline variant of Tasks RCU enabled. [ 0.024646] Rude variant of Tasks RCU enabled. [ 0.024646] Tracing variant of Tasks RCU enabled. [ 0.024647] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.024648] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.028999] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.029169] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.029279] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.029290] random: crng init done [ 0.034905] Console: colour VGA+ 80x25 [ 0.132283] printk: console [ttyS0] enabled [ 0.132812] ACPI: Core revision 20220331 [ 0.133416] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.134628] APIC: Switch to symmetric I/O mode setup [ 0.139333] x2apic enabled [ 0.139954] Switched APIC routing to physical x2apic. [ 0.141632] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.142771] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.144115] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.145116] pid_max: default: 32768 minimum: 301 [ 0.146135] LSM: Security Framework initializing [ 0.146727] landlock: Up and running. [ 0.147599] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.148117] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.149383] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.150118] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.151117] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.152117] Spectre V2 : Mitigation: Retpolines [ 0.153116] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.154116] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.154970] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible! [ 0.155116] RETBleed: Vulnerable [ 0.155522] Speculative Store Bypass: Vulnerable [ 0.156117] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.157116] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.158116] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.159116] SRBDS: Unknown: Dependent on hypervisor status [ 0.175361] Freeing SMP alternatives memory: 52K [ 0.176114] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.176259] cblist_init_generic: Setting adjustable number of callback queues. [ 0.177117] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.177921] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.178135] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.178943] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only. [ 0.179158] rcu: Hierarchical SRCU implementation. [ 0.179763] rcu: Max phase no-delay instances is 400. [ 0.180356] smp: Bringing up secondary CPUs ... [ 0.181062] x86: Booting SMP configuration: [ 0.181120] .... node #0, CPUs: #1 #2 #3 [ 0.181427] smp: Brought up 1 node, 4 CPUs [ 0.182640] smpboot: Max logical packages: 1 [ 0.183117] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.184199] devtmpfs: initialized [ 0.184714] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.185122] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.186031] pinctrl core: initialized pinctrl subsystem [ 0.186800] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.187234] thermal_sys: Registered thermal governor 'step_wise' [ 0.187236] thermal_sys: Registered thermal governor 'user_space' [ 0.188052] cpuidle: using governor menu [ 0.188734] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.189119] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.190020] PCI: Using configuration type 1 for base access [ 0.191418] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.209447] raid6: avx2x4 gen() 29794 MB/s [ 0.226450] raid6: avx2x2 gen() 29868 MB/s [ 0.243453] raid6: avx2x1 gen() 26333 MB/s [ 0.243992] raid6: using algorithm avx2x2 gen() 29868 MB/s [ 0.261847] raid6: .... xor() 18098 MB/s, rmw enabled [ 0.262117] raid6: using avx2x2 recovery algorithm [ 0.262771] ACPI: Added _OSI(Module Device) [ 0.263118] ACPI: Added _OSI(Processor Device) [ 0.263702] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.265117] ACPI: Added _OSI(Processor Aggregator Device) [ 0.265810] ACPI: Added _OSI(Linux-Dell-Video) [ 0.266117] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.266815] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.267893] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.270480] ACPI: Interpreter enabled [ 0.271132] ACPI: PM: (supports S0 S3 S5) [ 0.271684] ACPI: Using IOAPIC for interrupt routing [ 0.272151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.273117] PCI: Using E820 reservations for host bridge windows [ 0.273988] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.275776] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.277122] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.278154] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.279217] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.281180] PCI host bridge to bus 0000:00 [ 0.281743] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.283121] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.284127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.285102] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.286119] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.287090] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.288119] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.288909] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.290669] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.293119] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.294927] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.300119] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.303040] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.304777] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.306098] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.308053] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.313119] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.316168] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.317628] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.320641] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.323513] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.325579] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.327200] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.328857] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.330118] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.332667] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.336118] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.338495] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.342679] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.345956] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.348735] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.349917] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.351794] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.353966] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.355495] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.358983] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.359564] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.361352] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.364682] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.366651] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.367952] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.370775] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.373073] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.374211] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.375084] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.376206] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.380204] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.381051] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.382187] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.383057] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.384151] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.384919] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.385132] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.385919] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.387127] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.387907] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.388153] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.388926] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.390606] SCSI subsystem initialized [ 0.391203] ACPI: bus type USB registered [ 0.391724] usbcore: registered new interface driver usbfs [ 0.392132] usbcore: registered new interface driver hub [ 0.392820] usbcore: registered new device driver usb [ 0.394133] pps_core: LinuxPPS API ver. 1 registered [ 0.394764] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395121] PTP clock support registered [ 0.396373] Bluetooth: Core ver 2.22 [ 0.397129] NET: Registered PF_BLUETOOTH protocol family [ 0.398118] Bluetooth: HCI device and connection manager initialized [ 0.400129] Bluetooth: HCI socket layer initialized [ 0.401120] Bluetooth: L2CAP socket layer initialized [ 0.402126] Bluetooth: SCO socket layer initialized [ 0.403148] PCI: Using ACPI for IRQ routing [ 0.462418] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.462951] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.463114] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.465120] vgaarb: loaded [ 0.465511] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.466117] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.471191] clocksource: Switched to clocksource kvm-clock [ 0.472406] pnp: PnP ACPI init [ 0.472953] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.474430] pnp: PnP ACPI: found 6 devices [ 0.481535] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.482691] NET: Registered PF_INET protocol family [ 0.483346] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.484661] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.485718] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.486728] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.487701] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.488595] TCP: Hash tables configured (established 4096 bind 4096) [ 0.489419] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.490890] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.492043] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.493134] RPC: Registered named UNIX socket transport module. [ 0.493898] RPC: Registered udp transport module. [ 0.494484] RPC: Registered tcp transport module. [ 0.495075] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.495886] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.496672] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.497442] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.498309] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.499200] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.500060] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.501205] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.502562] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.503836] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.505084] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.506339] PCI: CLS 0 bytes, default 64 [ 0.507053] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.508159] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.510111] Initialise system trusted keyrings [ 0.510807] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.512913] NFS: Registering the id_resolver key type [ 0.513569] Key type id_resolver registered [ 0.514106] Key type id_legacy registered [ 0.515020] Key type cifs.idmap registered [ 0.524383] xor: automatically using best checksumming function avx [ 0.525303] Key type asymmetric registered [ 0.525823] Asymmetric key parser 'x509' registered [ 0.526457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.527394] io scheduler mq-deadline registered [ 0.527965] io scheduler kyber registered [ 0.528793] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.533171] ACPI: button: Power Button [PWRF] [ 0.534231] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.535987] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.537731] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.539485] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.540967] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.541905] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.543023] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.544144] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.546157] Linux agpgart interface v0.103 [ 0.546757] ACPI: bus type drm_connector registered [ 0.547495] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.548202] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.558192] Console: switching to colour dummy device 80x25 [ 0.559076] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.559078] [drm] features: -context_init [ 0.561053] [drm] number of scanouts: 1 [ 0.561555] [drm] number of cap sets: 0 [ 0.562317] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.566000] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.567839] Console: switching to colour frame buffer device 160x50 [ 0.592251] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.594942] brd: module loaded [ 0.596508] loop: module loaded [ 0.597037] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.599048] virtio_blk virtio3: [vda] 782844 512-byte logical blocks (401 MB/382 MiB) [ 0.601837] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.602888] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.605088] scsi host0: ahci [ 0.605710] scsi host1: ahci [ 0.606329] scsi host2: ahci [ 0.606955] scsi host3: ahci [ 0.607545] scsi host4: ahci [ 0.608146] scsi host5: ahci [ 0.608573] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.609512] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.610456] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.611401] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.612366] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.613304] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.615642] e100: Intel(R) PRO/100 Network Driver [ 0.616264] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.616978] e1000: Intel(R) PRO/1000 Network Driver [ 0.617594] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.618332] e1000e: Intel(R) PRO/1000 Network Driver [ 0.618962] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.619722] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.620413] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.621130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.621952] ehci-pci: EHCI PCI platform driver [ 0.623094] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.623775] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.624873] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.632199] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.633154] hub 1-0:1.0: USB hub found [ 0.633655] hub 1-0:1.0: 6 ports detected [ 0.634334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.635135] ohci-pci: OHCI PCI platform driver [ 0.635713] uhci_hcd: USB Universal Host Controller Interface driver [ 0.637056] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.637728] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.638741] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.639638] hub 2-0:1.0: USB hub found [ 0.640160] hub 2-0:1.0: 2 ports detected [ 0.641296] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.642024] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.643072] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.644162] hub 3-0:1.0: USB hub found [ 0.644692] hub 3-0:1.0: 2 ports detected [ 0.645714] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.646402] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.647421] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.648292] hub 4-0:1.0: USB hub found [ 0.648803] hub 4-0:1.0: 2 ports detected [ 0.649560] usbcore: registered new interface driver usb-storage [ 0.650368] usbcore: registered new interface driver usbserial_generic [ 0.651202] usbserial: USB Serial support registered for generic [ 0.651980] usbcore: registered new interface driver ftdi_sio [ 0.652787] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.653750] usbcore: registered new interface driver pl2303 [ 0.654461] usbserial: USB Serial support registered for pl2303 [ 0.655336] i8042: PNP: No PS/2 controller found. [ 0.656026] mousedev: PS/2 mouse device common for all mice [ 0.656914] rtc_cmos 00:04: RTC can wake from S4 [ 0.657969] rtc_cmos 00:04: registered as rtc0 [ 0.658608] rtc_cmos 00:04: setting system clock to 2023-01-02T23:28:32 UTC (1672702112) [ 0.659665] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.660877] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.661707] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.662460] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.663693] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.665388] intel_pstate: CPU model not supported [ 0.666014] sdhci: Secure Digital Host Controller Interface driver [ 0.666799] sdhci: Copyright(c) Pierre Ossman [ 0.667370] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.668177] usbcore: registered new interface driver usbhid [ 0.668889] usbhid: USB HID core driver [ 0.669403] u32 classifier [ 0.669752] input device check on [ 0.670214] Actions configured [ 0.670763] NET: Registered PF_INET6 protocol family [ 0.671857] Segment Routing with IPv6 [ 0.672370] In-situ OAM (IOAM) with IPv6 [ 0.672902] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.673789] NET: Registered PF_PACKET protocol family [ 0.674482] Bridge firewalling registered [ 0.675012] Key type dns_resolver registered [ 0.675638] NET: Registered PF_VSOCK protocol family [ 0.676633] IPI shorthand broadcast: enabled [ 0.677226] sched_clock: Marking stable (566264817, 110938589)->(690896221, -13692815) [ 0.678382] Loading compiled-in X.509 certificates [ 0.679151] Key type ._fscrypt registered [ 0.679676] Key type .fscrypt registered [ 0.680173] Key type fscrypt-provisioning registered [ 0.681034] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.682412] Key type encrypted registered [ 0.684679] printk: console [netcon0] enabled [ 0.685248] netconsole: network logging started [ 0.877161] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.920488] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.921495] ata1: SATA link down (SStatus 0 SControl 300) [ 0.922546] ata4: SATA link down (SStatus 0 SControl 300) [ 0.923579] ata5: SATA link down (SStatus 0 SControl 300) [ 0.924329] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.925058] ata3.00: applying bridge limits [ 0.925755] ata6: SATA link down (SStatus 0 SControl 300) [ 0.926779] ata2: SATA link down (SStatus 0 SControl 300) [ 0.927569] ata3.00: configured for UDMA/100 [ 0.932765] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.968448] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.969291] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.998171] IP-Config: Complete: [ 0.998634] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 0.999917] host=192.168.7.2, domain=, nis-domain=(none) [ 1.000688] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.000690] nameserver0=8.8.8.8 [ 1.002499] md: Waiting for all devices to be available before autodetect [ 1.003095] md: If you don't use raid, use raid=noautodetect [ 1.003629] md: Autodetecting RAID arrays. [ 1.003995] md: autorun ... [ 1.004259] md: ... autorun DONE. [ 1.005721] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.006471] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.007146] devtmpfs: mounted [ 1.008769] Freeing unused kernel image (initmem) memory: 1936K [ 1.012665] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.013743] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.014199] Write protecting the kernel read-only data: 22528k [ 1.016226] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.016997] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.017662] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.069587] udevd[173]: starting version 3.2.11 [ 1.073435] udevd[174]: starting eudev-3.2.11 [ 1.129166] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.262787] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.315322] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.376310] EXT4-fs (vda): re-mounted. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:39] Created VT-bound seat seat0[0m 00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seatd.c:194] seatd started[0m Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.121 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 369, uid: 1000, gid: 1000)[0m 00:00:00.121 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:170] Added client 2 to seat0[0m 00:00:00.121 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:480] Opened client 2 on seat0[0m [ 1.643166] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCKTqd6qcFuOuKX+odZH9KsvufCAbrRegbSniD0WQivRbeJzI4LXTaooSaFvfHlVLJKwloChIIZ0RVBm4Mqt8d6nqKXKIDzLUrwTMp0aGU2/vb/eeoSc8LTPmHLdOYyumBI0HG04q6/b4UTNU8MGVrDaX80jG1cGsT871dRarUb77k5dm0nSRn5WjSuiKVOnzzq1gNgrBvcZnxUsa6EBrhKXRXOMH+Tb4nPMyn+EgY/K9Bcrl+xfHUFMKR+UxNE6n20NKEdUZdMnqORBiMKSl0QyfGe2R/y3zQ4R29jmJZp2oMlu/SlUg0luvznmzkeTaXh1rF7uwHgR8SxbBG0e2jr root@qemux86-64 Fingerprint: SHA256:j1RTeabp7kq+G33eEPmtekC0ExORe6gt01isIwMHHKI dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: [ 1.819060] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.819569] Bluetooth: BNEP filters: protocol multicast [ 1.820183] Bluetooth: BNEP socket layer initialized done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:00:27.643 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 5992, uid: 0, gid: 0)[0m 00:00:27.644 [1;31m [c/debug/seatd/0.7.0-r0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client[0m 00:00:27.644 [1;31m [c/debug/seatd/0.7.0-r0/seatd/client.c:177] Could not add client to target seat: Device or resource busy[0m