[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 800243941 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000007] tsc: Detected 2599.998 MHz processor
[    0.000930] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000962] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008532] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.008687] ACPI: Early table checksum verification disabled
[    0.008697] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.008703] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008712] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008718] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008721] ACPI: FACS 0x000000001FFE0000 000040
[    0.008724] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008728] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008731] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008734] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008737] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df]
[    0.008738] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb]
[    0.008739] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008740] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f]
[    0.008741] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7]
[    0.008741] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3]
[    0.008742] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b]
[    0.009006] Zone ranges:
[    0.009007]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009009]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.009010]   Normal   empty
[    0.009011] Movable zone start for each node
[    0.009011] Early memory node ranges
[    0.009012]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.009013]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.009014] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.047556] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.047574] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.078944] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.079507] ACPI: PM-Timer IO Port: 0x608
[    0.079520] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.079557] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.079561] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.079563] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.079564] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.079569] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.079570] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.079574] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.079576] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.079580] TSC deadline timer available
[    0.079582] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.079612] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.079613] Booting paravirtualized kernel on KVM
[    0.079618] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.079623] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.089231] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.089273] Built 1 zonelists, mobility grouping on.  Total pages: 128727
[    0.089275] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.089457] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.089519] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.104501] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.120247] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved)
[    0.120313] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.120321] Kernel/User page tables isolation: enabled
[    0.120336] ftrace: allocating 47075 entries in 184 pages
[    0.130839] ftrace: allocated 184 pages with 4 groups
[    0.130889] Dynamic Preempt: full
[    0.144646] rcu: Preemptible hierarchical RCU implementation.
[    0.144647] rcu: 	RCU event tracing is enabled.
[    0.144648] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.144649] 	All grace periods are expedited (rcu_expedited).
[    0.144650] 	Trampoline variant of Tasks RCU enabled.
[    0.144651] 	Rude variant of Tasks RCU enabled.
[    0.144651] 	Tracing variant of Tasks RCU enabled.
[    0.144652] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.144653] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.148978] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.149145] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.149255] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.149269] random: crng init done
[    0.155674] Console: colour VGA+ 80x25
[    0.285141] printk: console [ttyS0] enabled
[    0.285781] ACPI: Core revision 20220331
[    0.286548] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.288108] APIC: Switch to symmetric I/O mode setup
[    0.289178] x2apic enabled
[    0.289886] Switched APIC routing to physical x2apic.
[    0.291839] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.292924] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a3a7b45f, max_idle_ns: 440795312762 ns
[    0.294646] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599998)
[    0.295647] pid_max: default: 32768 minimum: 301
[    0.296663] LSM: Security Framework initializing
[    0.297654] landlock: Up and running.
[    0.299649] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.300649] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.301913] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.302650] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.303648] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.304648] Spectre V2 : Mitigation: Retpolines
[    0.305347] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.305647] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.306647] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.307647] RETBleed: Vulnerable
[    0.308647] Speculative Store Bypass: Vulnerable
[    0.309651] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.310647] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.311647] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.312648] SRBDS: Unknown: Dependent on hypervisor status
[    0.329050] Freeing SMP alternatives memory: 52K
[    0.329746] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.330751] cblist_init_generic: Setting adjustable number of callback queues.
[    0.331649] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.332666] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.333631] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.333661] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.334686] rcu: Hierarchical SRCU implementation.
[    0.335438] rcu: 	Max phase no-delay instances is 400.
[    0.335849] smp: Bringing up secondary CPUs ...
[    0.336675] x86: Booting SMP configuration:
[    0.337651] .... node  #0, CPUs:      #1 #2 #3
[    0.339154] smp: Brought up 1 node, 4 CPUs
[    0.340580] smpboot: Max logical packages: 1
[    0.340650] smpboot: Total of 4 processors activated (20799.98 BogoMIPS)
[    0.342042] devtmpfs: initialized
[    0.342812] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.343659] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.344680] pinctrl core: initialized pinctrl subsystem
[    0.345866] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.346759] thermal_sys: Registered thermal governor 'step_wise'
[    0.346761] thermal_sys: Registered thermal governor 'user_space'
[    0.347701] cpuidle: using governor menu
[    0.348646] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.351660] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.353665] PCI: Using configuration type 1 for base access
[    0.356681] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.374648] raid6: avx2x4   gen() 25945 MB/s
[    0.391648] raid6: avx2x2   gen() 30240 MB/s
[    0.409648] raid6: avx2x1   gen() 26979 MB/s
[    0.410384] raid6: using algorithm avx2x2 gen() 30240 MB/s
[    0.427647] raid6: .... xor() 18442 MB/s, rmw enabled
[    0.428522] raid6: using avx2x2 recovery algorithm
[    0.428686] ACPI: Added _OSI(Module Device)
[    0.429357] ACPI: Added _OSI(Processor Device)
[    0.429649] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.430393] ACPI: Added _OSI(Processor Aggregator Device)
[    0.430649] ACPI: Added _OSI(Linux-Dell-Video)
[    0.431359] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.431649] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.433285] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.434850] ACPI: Interpreter enabled
[    0.435469] ACPI: PM: (supports S0 S3 S5)
[    0.435650] ACPI: Using IOAPIC for interrupt routing
[    0.436470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.436649] PCI: Using E820 reservations for host bridge windows
[    0.437693] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.440252] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.440653] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.441684] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.442714] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.443691] PCI host bridge to bus 0000:00
[    0.444341] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.444650] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.445649] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.446649] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.447648] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.448649] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.449665] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.450622] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.451294] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.452650] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.454482] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.457649] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.459649] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.461482] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.462650] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.464650] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.467650] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.471599] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.473260] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.475674] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.477666] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.481673] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.482733] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.484511] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.485650] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.487650] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.491650] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.494524] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.498270] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.499448] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.501222] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.502504] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.504114] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.505778] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.507034] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.509601] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.510164] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.510928] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.514148] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.515474] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.517181] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.519651] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.521696] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.522728] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.523720] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.524723] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.525723] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.526719] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.527721] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.528723] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.529682] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.530659] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.531607] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.531656] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.532602] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.532654] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.533658] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.534613] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.535064] SCSI subsystem initialized
[    0.535752] ACPI: bus type USB registered
[    0.536343] usbcore: registered new interface driver usbfs
[    0.536664] usbcore: registered new interface driver hub
[    0.537502] usbcore: registered new device driver usb
[    0.537665] pps_core: LinuxPPS API ver. 1 registered
[    0.538464] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.538652] PTP clock support registered
[    0.539714] Bluetooth: Core ver 2.22
[    0.540318] NET: Registered PF_BLUETOOTH protocol family
[    0.540649] Bluetooth: HCI device and connection manager initialized
[    0.541644] Bluetooth: HCI socket layer initialized
[    0.541650] Bluetooth: L2CAP socket layer initialized
[    0.542440] Bluetooth: SCO socket layer initialized
[    0.542717] PCI: Using ACPI for IRQ routing
[    0.618310] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.618635] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.618646] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.618651] vgaarb: loaded
[    0.619129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.619649] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.623762] clocksource: Switched to clocksource kvm-clock
[    0.624662] pnp: PnP ACPI init
[    0.625302] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.626667] pnp: PnP ACPI: found 6 devices
[    0.645624] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.647062] NET: Registered PF_INET protocol family
[    0.647872] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.649297] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.652479] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.653704] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.654920] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.656168] TCP: Hash tables configured (established 4096 bind 4096)
[    0.657172] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.658192] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.659308] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.660548] RPC: Registered named UNIX socket transport module.
[    0.661501] RPC: Registered udp transport module.
[    0.662244] RPC: Registered tcp transport module.
[    0.662987] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.663997] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.664962] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.665938] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.667012] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.668102] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.669190] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.670561] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.672188] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.673697] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.675129] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.676564] PCI: CLS 0 bytes, default 64
[    0.677264] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3a7b45f, max_idle_ns: 440795312762 ns
[    0.685264] Initialise system trusted keyrings
[    0.686201] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.688711] NFS: Registering the id_resolver key type
[    0.689534] Key type id_resolver registered
[    0.690193] Key type id_legacy registered
[    0.691276] Key type cifs.idmap registered
[    0.700887] xor: automatically using best checksumming function   avx       
[    0.702004] Key type asymmetric registered
[    0.702643] Asymmetric key parser 'x509' registered
[    0.703409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.704557] io scheduler mq-deadline registered
[    0.705270] io scheduler kyber registered
[    0.706405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.710710] ACPI: button: Power Button [PWRF]
[    0.712825] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.714952] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.717050] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.719132] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.721229] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.722754] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.724198] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.725599] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.728075] Linux agpgart interface v0.103
[    0.728868] ACPI: bus type drm_connector registered
[    0.729773] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.730657] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.749856] Console: switching to colour dummy device 80x25
[    0.750987] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.750989] [drm] features: -context_init
[    0.753975] [drm] number of scanouts: 1
[    0.754924] [drm] number of cap sets: 0
[    0.756309] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.763097] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.785728] Console: switching to colour frame buffer device 160x50
[    0.810508] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.816551] brd: module loaded
[    0.818358] loop: module loaded
[    0.819032] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.821435] virtio_blk virtio3: [vda] 782594 512-byte logical blocks (401 MB/382 MiB)
[    0.825286] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.826626] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.830427] scsi host0: ahci
[    0.831313] scsi host1: ahci
[    0.832137] scsi host2: ahci
[    0.833014] scsi host3: ahci
[    0.833863] scsi host4: ahci
[    0.835608] scsi host5: ahci
[    0.836813] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.839391] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.842010] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.844639] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.847221] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.848818] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.851602] e100: Intel(R) PRO/100 Network Driver
[    0.852396] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.853270] e1000: Intel(R) PRO/1000 Network Driver
[    0.854021] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.854916] e1000e: Intel(R) PRO/1000 Network Driver
[    0.855711] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.856634] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.857473] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.858357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.859366] ehci-pci: EHCI PCI platform driver
[    0.860694] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.861520] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.862881] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.870692] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.872034] hub 1-0:1.0: USB hub found
[    0.872942] hub 1-0:1.0: 6 ports detected
[    0.874076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.875423] ohci-pci: OHCI PCI platform driver
[    0.876397] uhci_hcd: USB Universal Host Controller Interface driver
[    0.878508] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.879851] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.882179] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.884195] hub 2-0:1.0: USB hub found
[    0.884921] hub 2-0:1.0: 2 ports detected
[    0.886326] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.887152] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.888591] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.889801] hub 3-0:1.0: USB hub found
[    0.890413] hub 3-0:1.0: 2 ports detected
[    0.891861] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.892756] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.894152] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.895408] hub 4-0:1.0: USB hub found
[    0.896052] hub 4-0:1.0: 2 ports detected
[    0.896842] usbcore: registered new interface driver usb-storage
[    0.897839] usbcore: registered new interface driver usbserial_generic
[    0.898862] usbserial: USB Serial support registered for generic
[    0.899931] usbcore: registered new interface driver ftdi_sio
[    0.900871] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.902039] usbcore: registered new interface driver pl2303
[    0.902951] usbserial: USB Serial support registered for pl2303
[    0.903890] i8042: PNP: No PS/2 controller found.
[    0.904760] mousedev: PS/2 mouse device common for all mice
[    0.905922] rtc_cmos 00:04: RTC can wake from S4
[    0.907438] rtc_cmos 00:04: registered as rtc0
[    0.908280] rtc_cmos 00:04: setting system clock to 2023-01-04T13:12:34 UTC (1672837954)
[    0.909546] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.910982] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.911976] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.912852] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.914394] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.915962] intel_pstate: CPU model not supported
[    0.916731] sdhci: Secure Digital Host Controller Interface driver
[    0.917682] sdhci: Copyright(c) Pierre Ossman
[    0.918363] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.919317] usbcore: registered new interface driver usbhid
[    0.920218] usbhid: USB HID core driver
[    0.920841] u32 classifier
[    0.921264]     input device check on
[    0.921830]     Actions configured
[    0.922480] NET: Registered PF_INET6 protocol family
[    0.925949] Segment Routing with IPv6
[    0.926581] In-situ OAM (IOAM) with IPv6
[    0.927268] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.928316] NET: Registered PF_PACKET protocol family
[    0.929140] Bridge firewalling registered
[    0.929796] Key type dns_resolver registered
[    0.930603] NET: Registered PF_VSOCK protocol family
[    0.932189] IPI shorthand broadcast: enabled
[    0.932943] sched_clock: Marking stable (791423421, 141494447)->(1069141465, -136223597)
[    0.934386] Loading compiled-in X.509 certificates
[    0.935360] Key type ._fscrypt registered
[    0.936011] Key type .fscrypt registered
[    0.936612] Key type fscrypt-provisioning registered
[    0.937661] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.939620] Key type encrypted registered
[    0.943191] printk: console [netcon0] enabled
[    0.943909] netconsole: network logging started
[    1.117756] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.160823] ata6: SATA link down (SStatus 0 SControl 300)
[    1.162450] ata5: SATA link down (SStatus 0 SControl 300)
[    1.165149] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.167943] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.170294] ata3.00: applying bridge limits
[    1.172295] ata2: SATA link down (SStatus 0 SControl 300)
[    1.174973] ata1: SATA link down (SStatus 0 SControl 300)
[    1.176271] ata3.00: configured for UDMA/100
[    1.177337] ata4: SATA link down (SStatus 0 SControl 300)
[    1.180021] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.217178] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.219142] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.252990] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.266926] IP-Config: Complete:
[    1.267277] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.268111]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    1.268116]      host=192.168.7.8, domain=, nis-domain=(none)
[    1.268118]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.268120]      nameserver0=8.8.8.8
[    1.279219] md: Waiting for all devices to be available before autodetect
[    1.280251] md: If you don't use raid, use raid=noautodetect
[    1.281148] md: Autodetecting RAID arrays.
[    1.281727] md: autorun ...
[    1.282125] md: ... autorun DONE.
[    1.284419] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.285677] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.286715] devtmpfs: mounted
[    1.288768] Freeing unused kernel image (initmem) memory: 1936K
[    1.289750] Write protecting the kernel read-only data: 22528k
[    1.292236] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.293552] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.294604] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.392558] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.403455] udevd[173]: starting version 3.2.11
[    1.412904] udevd[174]: starting eudev-3.2.11
[    1.543880] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.597892] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.669714] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.857699] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:39] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.150 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 374, uid: 1000, gid: 1000)[0m
00:00:00.150 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:170] Added client 2 to seat0[0m
00:00:00.150 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:480] Opened client 2 on seat0[0m
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDH+YxeM73MuoR/0Ei0SNUl/QAIjPxVU4GKDRWe/K8x1bV0+wMSHGkJj1huPgkDo4F8Pmkvn9ZBl13djAe9ngfIleiIFFgFoQZD4JgW0DVao3PrrN9zYShl+XpOYrrDBTRaa8dBnMj5reu5KjkQ6FAttC+nA8ahD9aEkbA1FSSE3rl/AX3iSicv69GRJ6BZ+Ot7sb7evFyQZiaflerUYfULOu8e5VbGp7yxXn/RzqKGV9TU0CUziMo+tzP2HRu8j8LZt2Wq8zhria2Z/MQ7bqpCNuQSA3dCb8DWL/bUud/IRHJHmELHGYeV+TPjFVw5LMp1lucSFMZsamteAzPvRbrD root@qemux86-64
Fingerprint: SHA256:42fTy6rpqdeV6HffNrko2w0x5yG0GRgD3vycDrosoEs
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.567622] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.568305] Bluetooth: BNEP filters: protocol multicast
[    2.568953] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:00:34.657 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 5997, uid: 0, gid: 0)[0m
00:00:34.666 [1;31m [c/debug/seatd/0.7.0-r0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client[0m
00:00:34.668 [1;31m [c/debug/seatd/0.7.0-r0/seatd/client.c:177] Could not add client to target seat: Device or resource busy[0m
