[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 777459266 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2599.996 MHz processor
[    0.000915] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000945] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008425] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.008587] ACPI: Early table checksum verification disabled
[    0.008600] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.008623] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008631] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008637] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008640] ACPI: FACS 0x000000001FFE0000 000040
[    0.008643] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008647] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008650] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008653] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008655] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df]
[    0.008657] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb]
[    0.008657] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008658] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f]
[    0.008659] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7]
[    0.008659] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3]
[    0.008660] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b]
[    0.008700] Zone ranges:
[    0.008701]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008702]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.008704]   Normal   empty
[    0.008704] Movable zone start for each node
[    0.008705] Early memory node ranges
[    0.008705]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008706]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.008707] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.020995] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.021010] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.055068] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.055480] ACPI: PM-Timer IO Port: 0x608
[    0.055491] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.055527] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.055531] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.055533] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.055535] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.055536] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.055537] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.055541] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.055543] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.055547] TSC deadline timer available
[    0.055549] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.055580] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.055582] Booting paravirtualized kernel on KVM
[    0.055584] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.055588] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.066311] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.066349] Built 1 zonelists, mobility grouping on.  Total pages: 128727
[    0.066350] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.066551] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.066623] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.076765] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.087626] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved)
[    0.087680] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.087688] Kernel/User page tables isolation: enabled
[    0.087702] ftrace: allocating 47075 entries in 184 pages
[    0.098792] ftrace: allocated 184 pages with 4 groups
[    0.098841] Dynamic Preempt: full
[    0.109146] rcu: Preemptible hierarchical RCU implementation.
[    0.109147] rcu: 	RCU event tracing is enabled.
[    0.109148] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.109149] 	All grace periods are expedited (rcu_expedited).
[    0.109150] 	Trampoline variant of Tasks RCU enabled.
[    0.109151] 	Rude variant of Tasks RCU enabled.
[    0.109151] 	Tracing variant of Tasks RCU enabled.
[    0.109152] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.109153] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.113304] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.113473] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.113584] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.113595] random: crng init done
[    0.119426] Console: colour VGA+ 80x25
[    0.217194] printk: console [ttyS0] enabled
[    0.217751] ACPI: Core revision 20220331
[    0.218377] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.219588] APIC: Switch to symmetric I/O mode setup
[    0.220440] x2apic enabled
[    0.221111] Switched APIC routing to physical x2apic.
[    0.223707] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.224511] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.225882] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.226882] pid_max: default: 32768 minimum: 301
[    0.227468] LSM: Security Framework initializing
[    0.227890] landlock: Up and running.
[    0.229884] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.230884] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.232202] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.232885] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.233618] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.233884] Spectre V2 : Mitigation: Retpolines
[    0.234882] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.235882] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.236882] Speculative Store Bypass: Vulnerable
[    0.237883] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.238684] MMIO Stale Data: Unknown: No mitigations
[    0.238882] SRBDS: Unknown: Dependent on hypervisor status
[    0.257726] Freeing SMP alternatives memory: 52K
[    0.258029] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.259046] cblist_init_generic: Setting adjustable number of callback queues.
[    0.259883] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.260686] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.260901] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.261704] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.261941] rcu: Hierarchical SRCU implementation.
[    0.262580] rcu: 	Max phase no-delay instances is 400.
[    0.263168] smp: Bringing up secondary CPUs ...
[    0.263852] x86: Booting SMP configuration:
[    0.263886] .... node  #0, CPUs:      #1 #2 #3
[    0.265202] smp: Brought up 1 node, 4 CPUs
[    0.265885] smpboot: Max logical packages: 1
[    0.266444] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.267067] devtmpfs: initialized
[    0.267921] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.268891] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.269776] pinctrl core: initialized pinctrl subsystem
[    0.271025] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.272028] thermal_sys: Registered thermal governor 'step_wise'
[    0.272030] thermal_sys: Registered thermal governor 'user_space'
[    0.272834] cpuidle: using governor menu
[    0.273547] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.273887] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.274739] PCI: Using configuration type 1 for base access
[    0.276200] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.293883] raid6: sse2x4   gen() 14765 MB/s
[    0.310883] raid6: sse2x2   gen() 15150 MB/s
[    0.327883] raid6: sse2x1   gen() 11402 MB/s
[    0.328416] raid6: using algorithm sse2x2 gen() 15150 MB/s
[    0.345883] raid6: .... xor() 10286 MB/s, rmw enabled
[    0.346520] raid6: using ssse3x2 recovery algorithm
[    0.346924] ACPI: Added _OSI(Module Device)
[    0.347465] ACPI: Added _OSI(Processor Device)
[    0.347884] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.348468] ACPI: Added _OSI(Processor Aggregator Device)
[    0.348884] ACPI: Added _OSI(Linux-Dell-Video)
[    0.349444] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.349884] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.351334] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.353047] ACPI: Interpreter enabled
[    0.353568] ACPI: PM: (supports S0 S3 S5)
[    0.353884] ACPI: Using IOAPIC for interrupt routing
[    0.354515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.354883] PCI: Using E820 reservations for host bridge windows
[    0.355695] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.357567] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.357888] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.358920] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.359741] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.359921] PCI host bridge to bus 0000:00
[    0.360445] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.360884] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.361728] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.361883] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.362805] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.362884] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.363824] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.363936] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.365252] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.366885] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.368654] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.371884] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.373885] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.375378] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.376884] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.378311] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.380884] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.383309] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.385393] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.387345] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.388798] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.390905] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.391893] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.393589] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.394884] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.396291] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.399806] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.401406] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.403301] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.404587] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.406647] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.407642] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.409286] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.410698] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.411213] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.413551] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.414322] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.415120] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.418130] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.419125] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.420673] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.423427] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.424796] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.424957] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.425776] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.425950] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.426767] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.426951] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.427785] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.427970] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.428768] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.428893] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.429649] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.429893] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.430659] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.430891] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.431637] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.431892] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.433193] SCSI subsystem initialized
[    0.433899] ACPI: bus type USB registered
[    0.434446] usbcore: registered new interface driver usbfs
[    0.434896] usbcore: registered new interface driver hub
[    0.435567] usbcore: registered new device driver usb
[    0.435899] pps_core: LinuxPPS API ver. 1 registered
[    0.436549] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.436886] PTP clock support registered
[    0.437403] Bluetooth: Core ver 2.22
[    0.437893] NET: Registered PF_BLUETOOTH protocol family
[    0.438586] Bluetooth: HCI device and connection manager initialized
[    0.438890] Bluetooth: HCI socket layer initialized
[    0.439509] Bluetooth: L2CAP socket layer initialized
[    0.439888] Bluetooth: SCO socket layer initialized
[    0.440526] PCI: Using ACPI for IRQ routing
[    0.499207] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.499706] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.499881] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.499886] vgaarb: loaded
[    0.500275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.500883] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.504984] clocksource: Switched to clocksource kvm-clock
[    0.505814] pnp: PnP ACPI init
[    0.506280] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.507396] pnp: PnP ACPI: found 6 devices
[    0.514325] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.515499] NET: Registered PF_INET protocol family
[    0.516235] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.518156] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.519253] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.520204] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.521177] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.522075] TCP: Hash tables configured (established 4096 bind 4096)
[    0.522876] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.523692] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.524592] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.525580] RPC: Registered named UNIX socket transport module.
[    0.526348] RPC: Registered udp transport module.
[    0.526942] RPC: Registered tcp transport module.
[    0.527515] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.528503] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.529340] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.530123] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.530966] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.531804] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.532665] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.533829] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.545402] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 11523 usecs
[    0.547175] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.558161] pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x700 took 10907 usecs
[    0.559296] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.570395] pci 0000:00:1d.2: quirk_usb_early_handoff+0x0/0x700 took 11007 usecs
[    0.571537] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.572963] PCI: CLS 0 bytes, default 64
[    0.573697] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.574854] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.577941] Initialise system trusted keyrings
[    0.578644] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.580946] NFS: Registering the id_resolver key type
[    0.581624] Key type id_resolver registered
[    0.582158] Key type id_legacy registered
[    0.583053] Key type cifs.idmap registered
[    0.592826] xor: automatically using best checksumming function   avx       
[    0.593715] Key type asymmetric registered
[    0.594234] Asymmetric key parser 'x509' registered
[    0.594839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.595913] io scheduler mq-deadline registered
[    0.596477] io scheduler kyber registered
[    0.597361] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.599039] ACPI: button: Power Button [PWRF]
[    0.600144] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.602026] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.603824] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.605638] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.608076] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.609037] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.610243] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.611410] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.613529] Linux agpgart interface v0.103
[    0.614178] ACPI: bus type drm_connector registered
[    0.614915] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.615659] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.624818] Console: switching to colour dummy device 80x25
[    0.625737] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.625739] [drm] features: -context_init
[    0.627738] [drm] number of scanouts: 1
[    0.628244] [drm] number of cap sets: 0
[    0.629119] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.633578] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.636392] Console: switching to colour frame buffer device 160x50
[    0.663423] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.666250] brd: module loaded
[    0.668028] loop: module loaded
[    0.672561] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.674674] virtio_blk virtio3: [vda] 1299920 512-byte logical blocks (666 MB/635 MiB)
[    0.688998] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.690114] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.691857] scsi host0: ahci
[    0.692508] scsi host1: ahci
[    0.693119] scsi host2: ahci
[    0.693751] scsi host3: ahci
[    0.694315] scsi host4: ahci
[    0.694931] scsi host5: ahci
[    0.695395] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.696379] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.697340] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.698263] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.699172] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.700088] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.702332] e100: Intel(R) PRO/100 Network Driver
[    0.703026] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.703750] e1000: Intel(R) PRO/1000 Network Driver
[    0.704398] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.705146] e1000e: Intel(R) PRO/1000 Network Driver
[    0.705795] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.706594] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.707289] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.708020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.708830] ehci-pci: EHCI PCI platform driver
[    0.709968] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.710636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.711742] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.718982] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.719960] hub 1-0:1.0: USB hub found
[    0.720463] hub 1-0:1.0: 6 ports detected
[    0.721191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.722016] ohci-pci: OHCI PCI platform driver
[    0.722585] uhci_hcd: USB Universal Host Controller Interface driver
[    0.723916] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.724598] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.725660] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.726599] hub 2-0:1.0: USB hub found
[    0.727119] hub 2-0:1.0: 2 ports detected
[    0.728244] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.728945] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.729976] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.730998] hub 3-0:1.0: USB hub found
[    0.742827] hub 3-0:1.0: 2 ports detected
[    0.743983] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.744673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.745722] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.746761] hub 4-0:1.0: USB hub found
[    0.747320] hub 4-0:1.0: 2 ports detected
[    0.747987] usbcore: registered new interface driver usb-storage
[    0.748786] usbcore: registered new interface driver usbserial_generic
[    0.749606] usbserial: USB Serial support registered for generic
[    0.750469] usbcore: registered new interface driver ftdi_sio
[    0.751227] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.752159] usbcore: registered new interface driver pl2303
[    0.752863] usbserial: USB Serial support registered for pl2303
[    0.753629] i8042: PNP: No PS/2 controller found.
[    0.754285] mousedev: PS/2 mouse device common for all mice
[    0.755173] rtc_cmos 00:04: RTC can wake from S4
[    0.756209] rtc_cmos 00:04: registered as rtc0
[    0.756911] rtc_cmos 00:04: setting system clock to 2023-01-04T01:20:39 UTC (1672795239)
[    0.757953] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.759168] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.760003] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.760723] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.761969] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.763205] intel_pstate: CPU model not supported
[    0.763811] sdhci: Secure Digital Host Controller Interface driver
[    0.764609] sdhci: Copyright(c) Pierre Ossman
[    0.765170] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.766028] usbcore: registered new interface driver usbhid
[    0.766724] usbhid: USB HID core driver
[    0.767229] u32 classifier
[    0.767606]     input device check on
[    0.768070]     Actions configured
[    0.768612] NET: Registered PF_INET6 protocol family
[    0.769759] Segment Routing with IPv6
[    0.770257] In-situ OAM (IOAM) with IPv6
[    0.770766] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.771669] NET: Registered PF_PACKET protocol family
[    0.772359] Bridge firewalling registered
[    0.772953] Key type dns_resolver registered
[    0.773573] NET: Registered PF_VSOCK protocol family
[    0.774586] IPI shorthand broadcast: enabled
[    0.775194] sched_clock: Marking stable (666764915, 108401315)->(853838708, -78672478)
[    0.776390] Loading compiled-in X.509 certificates
[    0.777123] Key type ._fscrypt registered
[    0.777635] Key type .fscrypt registered
[    0.778133] Key type fscrypt-provisioning registered
[    0.778989] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.780291] Key type encrypted registered
[    0.782003] printk: console [netcon0] enabled
[    0.782565] netconsole: network logging started
[    0.958966] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.013065] ata1: SATA link down (SStatus 0 SControl 300)
[    1.013941] ata2: SATA link down (SStatus 0 SControl 300)
[    1.014768] ata4: SATA link down (SStatus 0 SControl 300)
[    1.015625] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.016606] ata5: SATA link down (SStatus 0 SControl 300)
[    1.017426] ata6: SATA link down (SStatus 0 SControl 300)
[    1.018181] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.018963] ata3.00: applying bridge limits
[    1.019614] ata3.00: configured for UDMA/100
[    1.020538] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.067224] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.068131] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.092455] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.093999] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.098941] IP-Config: Complete:
[    1.099410]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.100653]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.101370]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.101372]      nameserver0=8.8.8.8
[    1.103170] md: Waiting for all devices to be available before autodetect
[    1.103766] md: If you don't use raid, use raid=noautodetect
[    1.104282] md: Autodetecting RAID arrays.
[    1.104685] md: autorun ...
[    1.104959] md: ... autorun DONE.
[    1.106838] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.107647] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.108360] devtmpfs: mounted
[    1.110051] Freeing unused kernel image (initmem) memory: 1936K
[    1.111961] Write protecting the kernel read-only data: 22528k
[    1.113685] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.114530] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.115176] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.186647] udevd[173]: starting version 3.2.11
[    1.191811] udevd[174]: starting eudev-3.2.11
[    1.208942] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.341525] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.394129] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.456528] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan  4 01:20:40 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    1.724900] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
D-BUS per-session daemon address is: unix:path=/tmp/dbus-5w2UMQugDw,guid=105134cee872f0c3b37f88a563b4d468
Using calibration data stored in /etc/pointercal.xinput
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC8XoQPiH31G+gYoRvN4q9Ra2w+v+v8nsao9ZXvMIQDGYa8lFxtaFxGtXkngVK9BMjnk8yqR6UIcS1d7e2veoCN60K+qBbzQuz4d/YlQjTj/Jc0zKLQ99DXXwJelH3n/owSI7Ey5EHNbAh+6WzOGhVz0ApTXM5d53UUbsVScnIU1V424wXzqLRFkntZ/SyYvrodjN013LDslKhsv8L7uymVelrSj/b3ImqL7N0FeIep7RGTfekB7lrgJ78jsyNaBx12rOFuCrbOrj8gHzBLW0Ntf/aCrzhY39R2jYc1ab9ALEhEtmiI6vGZFxdcGEIi8NHn1yFMsnhKiHpzgD+OHdRT root@qemux86-64
Fingerprint: SHA256:/cxl2/BuyhHWAmod2Tpbn7xNG7iEV4w6fxW28IFDESc
dropbear.
Starting rpcbind daemon...Using calibration data stored in /etc/pointercal.xinput
done.
Starting bluetooth: bluetoothd.
[settings daemon] Forking. run with -n to prevent fork
[    2.140558] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.141133] Bluetooth: BNEP filters: protocol multicast
[    2.141674] Bluetooth: BNEP socket layer initialized
Starting syslogd/klogd: done
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
dbus-daemon[593]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=594 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[593]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 