[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a7f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a80-0x0000000000ad3aaf] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3ab0-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 423684768 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2299.996 MHz processor
[    0.001158] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001189] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006769] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.006990] ACPI: Early table checksum verification disabled
[    0.006993] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.007002] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007008] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007013] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007017] ACPI: FACS 0x000000000FFE0000 000040
[    0.007020] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007024] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007027] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007030] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007033] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.007034] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.007035] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.007036] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.007037] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.007038] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.007039] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.007087] Zone ranges:
[    0.007088]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007091]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.007092]   Normal   empty
[    0.007093] Movable zone start for each node
[    0.007094] Early memory node ranges
[    0.007095]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007096]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.007098] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.007488] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007507] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.008159] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.008482] ACPI: PM-Timer IO Port: 0x608
[    0.008490] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.008518] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.008521] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.008523] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.008525] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.008526] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.008528] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.008532] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.008533] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.008536] TSC deadline timer available
[    0.008538] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.008556] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.008557] Booting paravirtualized kernel on KVM
[    0.008559] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.008563] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.009095] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.009127] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.009129] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.009223] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.009245] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.009779] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.010610] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved)
[    0.010654] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.010661] Kernel/User page tables isolation: enabled
[    0.010672] ftrace: allocating 47075 entries in 184 pages
[    0.020170] ftrace: allocated 184 pages with 4 groups
[    0.020234] Dynamic Preempt: full
[    0.020656] rcu: Preemptible hierarchical RCU implementation.
[    0.020657] rcu: 	RCU event tracing is enabled.
[    0.020657] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.020659] 	All grace periods are expedited (rcu_expedited).
[    0.020660] 	Trampoline variant of Tasks RCU enabled.
[    0.020661] 	Rude variant of Tasks RCU enabled.
[    0.020661] 	Tracing variant of Tasks RCU enabled.
[    0.020662] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.020663] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.025774] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.025950] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.026050] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.026061] random: crng init done
[    0.030267] Console: colour VGA+ 80x25
[    0.102390] printk: console [ttyS0] enabled
[    0.102759] ACPI: Core revision 20220331
[    0.103237] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.104149] APIC: Switch to symmetric I/O mode setup
[    0.104730] x2apic enabled
[    0.105127] Switched APIC routing to physical x2apic.
[    0.106258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.106802] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns
[    0.107743] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996)
[    0.108744] pid_max: default: 32768 minimum: 301
[    0.109174] LSM: Security Framework initializing
[    0.109752] landlock: Up and running.
[    0.110085] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.110745] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.111977] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.112460] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.112747] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.113745] Spectre V2 : Mitigation: Retpolines
[    0.114138] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.114744] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.115337] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.115744] RETBleed: Vulnerable
[    0.116743] Speculative Store Bypass: Vulnerable
[    0.117139] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.117744] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.118400] SRBDS: Unknown: Dependent on hypervisor status
[    0.136742] Freeing SMP alternatives memory: 52K
[    0.136864] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.137758] cblist_init_generic: Setting adjustable number of callback queues.
[    0.138431] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.138769] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.139347] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.139762] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.140609] rcu: Hierarchical SRCU implementation.
[    0.140745] rcu: 	Max phase no-delay instances is 400.
[    0.141498] smp: Bringing up secondary CPUs ...
[    0.141853] x86: Booting SMP configuration:
[    0.142240] .... node  #0, CPUs:      #1 #2 #3
[    0.143191] smp: Brought up 1 node, 4 CPUs
[    0.144123] smpboot: Max logical packages: 1
[    0.144502] smpboot: Total of 4 processors activated (18399.96 BogoMIPS)
[    0.145034] devtmpfs: initialized
[    0.145203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.145750] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.146412] pinctrl core: initialized pinctrl subsystem
[    0.147449] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.147874] thermal_sys: Registered thermal governor 'step_wise'
[    0.147876] thermal_sys: Registered thermal governor 'user_space'
[    0.148779] cpuidle: using governor menu
[    0.149804] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.150591] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.150758] PCI: Using configuration type 1 for base access
[    0.152799] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.171539] raid6: avx2x4   gen() 25123 MB/s
[    0.188316] raid6: avx2x2   gen() 24707 MB/s
[    0.205330] raid6: avx2x1   gen() 21971 MB/s
[    0.205746] raid6: using algorithm avx2x4 gen() 25123 MB/s
[    0.222311] raid6: .... xor() 8973 MB/s, rmw enabled
[    0.222727] raid6: using avx2x2 recovery algorithm
[    0.222822] ACPI: Added _OSI(Module Device)
[    0.223165] ACPI: Added _OSI(Processor Device)
[    0.223544] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.224745] ACPI: Added _OSI(Processor Aggregator Device)
[    0.225164] ACPI: Added _OSI(Linux-Dell-Video)
[    0.225545] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.225745] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.227127] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.230917] ACPI: Interpreter enabled
[    0.231286] ACPI: PM: (supports S0 S3 S5)
[    0.231608] ACPI: Using IOAPIC for interrupt routing
[    0.231775] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.232486] PCI: Using E820 reservations for host bridge windows
[    0.232833] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.235217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235750] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.236525] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.237808] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.238376] PCI host bridge to bus 0000:00
[    0.238720] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.239746] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.240297] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.241745] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.242361] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.242746] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.243476] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.243797] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.244675] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.246746] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.248717] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.254517] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.256746] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.259426] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.260746] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.262290] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.265746] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.267903] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.289752] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.308752] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.310584] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.327753] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.334598] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.335261] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.337748] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.339429] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.358749] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.361101] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.364643] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.367753] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.370305] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.371638] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.374747] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.376146] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.378195] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.380818] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.381628] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.382950] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.386747] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.389099] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.390389] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.393746] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.395349] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.395820] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.396408] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.396814] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.397340] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.397811] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.398356] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.399814] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.400314] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.400754] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.401239] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.401715] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.401753] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.402237] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.402714] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.403756] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.404711] SCSI subsystem initialized
[    0.404783] ACPI: bus type USB registered
[    0.405115] usbcore: registered new interface driver usbfs
[    0.405554] usbcore: registered new interface driver hub
[    0.405756] usbcore: registered new device driver usb
[    0.406175] pps_core: LinuxPPS API ver. 1 registered
[    0.406565] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.407748] PTP clock support registered
[    0.408079] Bluetooth: Core ver 2.22
[    0.408279] NET: Registered PF_BLUETOOTH protocol family
[    0.408748] Bluetooth: HCI device and connection manager initialized
[    0.409235] Bluetooth: HCI socket layer initialized
[    0.409609] Bluetooth: L2CAP socket layer initialized
[    0.409749] Bluetooth: SCO socket layer initialized
[    0.410766] PCI: Using ACPI for IRQ routing
[    0.447770] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.448302] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.448742] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.449749] vgaarb: loaded
[    0.450027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.450413] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.455849] clocksource: Switched to clocksource kvm-clock
[    0.456479] pnp: PnP ACPI init
[    0.456853] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.457664] pnp: PnP ACPI: found 6 devices
[    0.465129] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.466008] NET: Registered PF_INET protocol family
[    0.466451] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.467449] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.468136] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.468730] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.469328] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.469887] TCP: Hash tables configured (established 2048 bind 2048)
[    0.470409] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.470934] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.471543] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.472338] RPC: Registered named UNIX socket transport module.
[    0.472835] RPC: Registered udp transport module.
[    0.473204] RPC: Registered tcp transport module.
[    0.473571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.474099] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.474578] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.475062] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.475610] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.476152] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.476694] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.477594] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.478872] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.480010] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.481626] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.482712] PCI: CLS 0 bytes, default 64
[    0.483261] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.483954] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns
[    0.485549] Initialise system trusted keyrings
[    0.486037] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.488147] NFS: Registering the id_resolver key type
[    0.488568] Key type id_resolver registered
[    0.488906] Key type id_legacy registered
[    0.489588] Key type cifs.idmap registered
[    0.500898] xor: automatically using best checksumming function   avx       
[    0.501504] Key type asymmetric registered
[    0.501838] Asymmetric key parser 'x509' registered
[    0.502248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.502826] io scheduler mq-deadline registered
[    0.503177] io scheduler kyber registered
[    0.503993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.507839] ACPI: button: Power Button [PWRF]
[    0.508875] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.510444] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.512579] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.513991] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.518072] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.518692] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.519418] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.520154] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.525075] Linux agpgart interface v0.103
[    0.525523] ACPI: bus type drm_connector registered
[    0.526034] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.526493] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.533237] Console: switching to colour dummy device 80x25
[    0.533873] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.533875] [drm] features: -context_init
[    0.535234] [drm] number of scanouts: 1
[    0.535561] [drm] number of cap sets: 0
[    0.536218] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.539661] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.541628] Console: switching to colour frame buffer device 160x50
[    0.574594] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.577143] brd: module loaded
[    0.578654] loop: module loaded
[    0.584503] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.585966] virtio_blk virtio3: [vda] 262372 512-byte logical blocks (134 MB/128 MiB)
[    0.590187] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.590903] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.592647] scsi host0: ahci
[    0.593171] scsi host1: ahci
[    0.593657] scsi host2: ahci
[    0.594144] scsi host3: ahci
[    0.594694] scsi host4: ahci
[    0.595200] scsi host5: ahci
[    0.595513] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.596128] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.596714] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.597305] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.597907] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.598481] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.616014] e100: Intel(R) PRO/100 Network Driver
[    0.616503] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.616958] e1000: Intel(R) PRO/1000 Network Driver
[    0.617354] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.617825] e1000e: Intel(R) PRO/1000 Network Driver
[    0.618219] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.618708] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.619140] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.619589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.620119] ehci-pci: EHCI PCI platform driver
[    0.621183] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.621618] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.622347] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.629834] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.630565] hub 1-0:1.0: USB hub found
[    0.630913] hub 1-0:1.0: 6 ports detected
[    0.631430] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.631957] ohci-pci: OHCI PCI platform driver
[    0.632327] uhci_hcd: USB Universal Host Controller Interface driver
[    0.633507] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.633946] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.634632] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.635317] hub 2-0:1.0: USB hub found
[    0.635649] hub 2-0:1.0: 2 ports detected
[    0.636713] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.637155] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.637852] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.638539] hub 3-0:1.0: USB hub found
[    0.638943] hub 3-0:1.0: 2 ports detected
[    0.639995] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.640457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.641133] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.642016] hub 4-0:1.0: USB hub found
[    0.642342] hub 4-0:1.0: 2 ports detected
[    0.642841] usbcore: registered new interface driver usb-storage
[    0.643367] usbcore: registered new interface driver usbserial_generic
[    0.643904] usbserial: USB Serial support registered for generic
[    0.644411] usbcore: registered new interface driver ftdi_sio
[    0.644944] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.645568] usbcore: registered new interface driver pl2303
[    0.646070] usbserial: USB Serial support registered for pl2303
[    0.646556] i8042: PNP: No PS/2 controller found.
[    0.646988] mousedev: PS/2 mouse device common for all mice
[    0.647639] rtc_cmos 00:04: RTC can wake from S4
[    0.648452] rtc_cmos 00:04: registered as rtc0
[    0.648872] rtc_cmos 00:04: setting system clock to 2023-01-05T00:20:42 UTC (1672878042)
[    0.649545] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.650472] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.651016] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.651475] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.652469] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.653280] intel_pstate: CPU model not supported
[    0.653693] sdhci: Secure Digital Host Controller Interface driver
[    0.654201] sdhci: Copyright(c) Pierre Ossman
[    0.654582] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.655134] usbcore: registered new interface driver usbhid
[    0.655586] usbhid: USB HID core driver
[    0.655936] u32 classifier
[    0.656160]     input device check on
[    0.656451]     Actions configured
[    0.656868] NET: Registered PF_INET6 protocol family
[    0.658145] Segment Routing with IPv6
[    0.658531] In-situ OAM (IOAM) with IPv6
[    0.658870] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.659473] NET: Registered PF_PACKET protocol family
[    0.659927] Bridge firewalling registered
[    0.660264] Key type dns_resolver registered
[    0.660708] NET: Registered PF_VSOCK protocol family
[    0.661490] IPI shorthand broadcast: enabled
[    0.661886] sched_clock: Marking stable (583074196, 78783797)->(673047095, -11189102)
[    0.662693] Loading compiled-in X.509 certificates
[    0.663238] Key type ._fscrypt registered
[    0.663569] Key type .fscrypt registered
[    0.663977] Key type fscrypt-provisioning registered
[    0.664625] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.665706] Key type encrypted registered
[    0.667637] printk: console [netcon0] enabled
[    0.668022] netconsole: network logging started
[    0.873795] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.925978] ata5: SATA link down (SStatus 0 SControl 300)
[    0.926575] ata6: SATA link down (SStatus 0 SControl 300)
[    0.927123] ata2: SATA link down (SStatus 0 SControl 300)
[    0.927732] ata4: SATA link down (SStatus 0 SControl 300)
[    0.928276] ata1: SATA link down (SStatus 0 SControl 300)
[    0.928814] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.929479] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.929962] ata3.00: applying bridge limits
[    0.930456] ata3.00: configured for UDMA/100
[    0.931161] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.966150] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.966772] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.996792] IP-Config: Complete:
[    0.997145]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    0.997942]      host=192.168.7.2, domain=, nis-domain=(none)
[    0.998442]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.998444]      nameserver0=8.8.8.8
[    0.999577] md: Waiting for all devices to be available before autodetect
[    0.999965] md: If you don't use raid, use raid=noautodetect
[    1.000268] md: Autodetecting RAID arrays.
[    1.000480] md: autorun ...
[    1.000634] md: ... autorun DONE.
[    1.002376] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.002896] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.003545] devtmpfs: mounted
[    1.004974] Freeing unused kernel image (initmem) memory: 1936K
[    1.006307] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.007053] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.012855] Write protecting the kernel read-only data: 22528k
[    1.013971] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.014512] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.014930] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.078806] udevd[168]: starting version 3.2.11
[    1.083067] udevd[169]: starting eudev-3.2.11
[    1.121757] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.254390] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.307061] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.369959] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.671785] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
[    4.253438] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
starting 8 nfsd kernel threads: [    5.304171] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    5.305117] NFSD: Using legacy client tracking operations.
[    5.305534] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0

qemux86-64 login: 