[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000003] kvm-clock: using sched offset of 1201196239 cycles [ 0.000008] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000019] tsc: Detected 2599.996 MHz processor [ 0.001663] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001728] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.013727] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.014155] ACPI: Early table checksum verification disabled [ 0.014226] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS ) [ 0.014247] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014264] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014277] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014283] ACPI: FACS 0x000000001FFE0000 000040 [ 0.014288] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014293] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014298] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014303] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.014308] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6] [ 0.014310] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2] [ 0.014312] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.014314] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366] [ 0.014315] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e] [ 0.014317] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da] [ 0.014322] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402] [ 0.014484] Zone ranges: [ 0.014490] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014496] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.014500] Normal empty [ 0.014502] Movable zone start for each node [ 0.014503] Early memory node ranges [ 0.014504] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.014508] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.014512] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.033139] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.033462] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.320660] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.321490] ACPI: PM-Timer IO Port: 0x608 [ 0.321514] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.321577] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.321585] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.321592] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.321598] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.321604] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.321606] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.321615] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.321619] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.321631] TSC deadline timer available [ 0.321640] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.321736] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.321742] Booting paravirtualized kernel on KVM [ 0.321763] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.321782] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.338029] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.338121] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.338127] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.338570] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.338655] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.356064] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.374347] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved) [ 0.374519] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.374564] Kernel/User page tables isolation: enabled [ 0.374634] ftrace: allocating 47075 entries in 184 pages [ 0.392502] ftrace: allocated 184 pages with 4 groups [ 0.392856] Dynamic Preempt: full [ 0.408462] rcu: Preemptible hierarchical RCU implementation. [ 0.408468] rcu: RCU event tracing is enabled. [ 0.408469] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.408475] All grace periods are expedited (rcu_expedited). [ 0.408478] Trampoline variant of Tasks RCU enabled. [ 0.408479] Rude variant of Tasks RCU enabled. [ 0.408480] Tracing variant of Tasks RCU enabled. [ 0.408481] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.408486] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.416823] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.417105] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.417397] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.417424] random: crng init done [ 0.429146] Console: colour VGA+ 80x25 [ 0.591303] printk: console [ttyS0] enabled [ 0.592093] ACPI: Core revision 20220331 [ 0.593105] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.595007] APIC: Switch to symmetric I/O mode setup [ 0.596271] x2apic enabled [ 0.597163] Switched APIC routing to physical x2apic. [ 0.599577] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.604395] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.606553] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.607561] pid_max: default: 32768 minimum: 301 [ 0.608639] LSM: Security Framework initializing [ 0.609580] landlock: Up and running. [ 0.612573] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.613593] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.616376] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.617577] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.618573] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.619569] Spectre V2 : Mitigation: Retpolines [ 0.620557] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.621558] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.622558] Speculative Store Bypass: Vulnerable [ 0.623575] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.624557] MMIO Stale Data: Unknown: No mitigations [ 0.625567] SRBDS: Unknown: Dependent on hypervisor status [ 0.656551] Freeing SMP alternatives memory: 52K [ 0.657697] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.659081] cblist_init_generic: Setting adjustable number of callback queues. [ 0.659557] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.660642] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.661640] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.662627] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.663693] rcu: Hierarchical SRCU implementation. [ 0.664557] rcu: Max phase no-delay instances is 400. [ 0.666315] smp: Bringing up secondary CPUs ... [ 0.666914] x86: Booting SMP configuration: [ 0.667559] .... node #0, CPUs: #1 #2 #3 [ 0.684091] smp: Brought up 1 node, 4 CPUs [ 0.685563] smpboot: Max logical packages: 1 [ 0.686559] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.710750] devtmpfs: initialized [ 0.712060] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.712586] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.713732] pinctrl core: initialized pinctrl subsystem [ 0.716017] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.716917] thermal_sys: Registered thermal governor 'step_wise' [ 0.716921] thermal_sys: Registered thermal governor 'user_space' [ 0.718585] cpuidle: using governor menu [ 0.722762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.724570] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.726598] PCI: Using configuration type 1 for base access [ 0.731646] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.751558] raid6: sse2x4 gen() 8191 MB/s [ 0.769557] raid6: sse2x2 gen() 8770 MB/s [ 0.787557] raid6: sse2x1 gen() 6682 MB/s [ 0.788566] raid6: using algorithm sse2x2 gen() 8770 MB/s [ 0.806558] raid6: .... xor() 5481 MB/s, rmw enabled [ 0.807577] raid6: using ssse3x2 recovery algorithm [ 0.808744] ACPI: Added _OSI(Module Device) [ 0.809523] ACPI: Added _OSI(Processor Device) [ 0.809558] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.810493] ACPI: Added _OSI(Processor Aggregator Device) [ 0.810561] ACPI: Added _OSI(Linux-Dell-Video) [ 0.811448] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.811561] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.814097] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.815851] ACPI: Interpreter enabled [ 0.816582] ACPI: PM: (supports S0 S3 S5) [ 0.817346] ACPI: Using IOAPIC for interrupt routing [ 0.817618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.818557] PCI: Using E820 reservations for host bridge windows [ 0.819737] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.824435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.824580] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.825653] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.826664] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.827699] PCI host bridge to bus 0000:00 [ 0.828520] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.828560] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.829557] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.830559] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.831560] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.832566] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.833567] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.834755] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.836381] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.838560] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.840565] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.847347] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.848563] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.850450] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.852480] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.856560] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.859484] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.861591] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.865592] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.868478] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff] [ 0.871488] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.871833] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.873792] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.876551] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.880563] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.887563] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.891644] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.895447] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.896926] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.900386] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.901844] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.905562] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.908712] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.910232] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.914796] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.916209] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.917060] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.923064] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.924562] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.927087] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.931113] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.934033] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.934707] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.935687] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.936681] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.937696] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.938696] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.939690] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.940709] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.941673] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.942595] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.943597] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.944577] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.945587] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.946575] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.947589] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.948576] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.950575] SCSI subsystem initialized [ 0.977742] ACPI: bus type USB registered [ 0.978708] usbcore: registered new interface driver usbfs [ 0.979588] usbcore: registered new interface driver hub [ 0.980578] usbcore: registered new device driver usb [ 0.981626] pps_core: LinuxPPS API ver. 1 registered [ 0.982555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.983571] PTP clock support registered [ 0.985195] Bluetooth: Core ver 2.22 [ 0.985665] NET: Registered PF_BLUETOOTH protocol family [ 0.986558] Bluetooth: HCI device and connection manager initialized [ 0.987576] Bluetooth: HCI socket layer initialized [ 0.988548] Bluetooth: L2CAP socket layer initialized [ 0.989582] Bluetooth: SCO socket layer initialized [ 0.990678] PCI: Using ACPI for IRQ routing [ 1.072662] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.073551] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.073551] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.073570] vgaarb: loaded [ 1.074346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.074560] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.078798] clocksource: Switched to clocksource kvm-clock [ 1.110697] pnp: PnP ACPI init [ 1.115763] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.123035] pnp: PnP ACPI: found 6 devices [ 1.136090] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.137932] NET: Registered PF_INET protocol family [ 1.138991] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.142227] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.143937] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.145438] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.147049] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.185359] TCP: Hash tables configured (established 4096 bind 4096) [ 1.186846] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.188110] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.189722] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.227537] RPC: Registered named UNIX socket transport module. [ 1.229180] RPC: Registered udp transport module. [ 1.233902] RPC: Registered tcp transport module. [ 1.234822] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.236086] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.237305] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.238525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.239840] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 1.241112] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.243872] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 1.245830] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.248083] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.252161] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.254281] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.256335] PCI: CLS 0 bytes, default 64 [ 1.276106] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 1.283090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 1.328501] Initialise system trusted keyrings [ 1.329936] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 1.334856] NFS: Registering the id_resolver key type [ 1.337565] Key type id_resolver registered [ 1.338415] Key type id_legacy registered [ 1.345914] Key type cifs.idmap registered [ 1.363479] xor: automatically using best checksumming function avx [ 1.372866] Key type asymmetric registered [ 1.373693] Asymmetric key parser 'x509' registered [ 1.374729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.380472] io scheduler mq-deadline registered [ 1.381397] io scheduler kyber registered [ 1.383652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.388760] ACPI: button: Power Button [PWRF] [ 1.391267] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.394663] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.400147] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.403295] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.408194] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.410242] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 1.412303] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.414264] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.418842] Linux agpgart interface v0.103 [ 1.420253] ACPI: bus type drm_connector registered [ 1.421633] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.423196] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.439454] Console: switching to colour dummy device 80x25 [ 1.448399] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.448404] [drm] features: -context_init [ 1.451954] [drm] number of scanouts: 1 [ 1.454631] [drm] number of cap sets: 0 [ 1.456823] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 1.668405] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.708721] Console: switching to colour frame buffer device 160x50 [ 1.775315] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.781667] brd: module loaded [ 1.801497] loop: module loaded [ 1.802482] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.807136] virtio_blk virtio3: [vda] 1256760 512-byte logical blocks (643 MB/614 MiB) [ 1.817624] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.820870] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.910438] scsi host0: ahci [ 1.915566] scsi host1: ahci [ 1.920406] scsi host2: ahci [ 1.925373] scsi host3: ahci [ 1.930095] scsi host4: ahci [ 1.931276] scsi host5: ahci [ 1.932998] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32 [ 1.934442] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32 [ 1.935866] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32 [ 1.937349] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32 [ 1.938787] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32 [ 1.940245] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32 [ 1.950099] e100: Intel(R) PRO/100 Network Driver [ 1.961170] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.962984] e1000: Intel(R) PRO/1000 Network Driver [ 1.963880] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.964945] e1000e: Intel(R) PRO/1000 Network Driver [ 1.965906] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.967014] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.968041] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.969180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.970452] ehci-pci: EHCI PCI platform driver [ 1.974147] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.980077] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.981942] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000 [ 1.989777] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.993275] hub 1-0:1.0: USB hub found [ 1.994655] hub 1-0:1.0: 6 ports detected [ 1.995857] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.997088] ohci-pci: OHCI PCI platform driver [ 1.997975] uhci_hcd: USB Universal Host Controller Interface driver [ 2.000357] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.001384] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.003052] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 2.004882] hub 2-0:1.0: USB hub found [ 2.014568] hub 2-0:1.0: 2 ports detected [ 2.022523] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.024892] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.026509] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 2.028274] hub 3-0:1.0: USB hub found [ 2.033973] hub 3-0:1.0: 2 ports detected [ 2.036533] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.039088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.040929] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 2.042642] hub 4-0:1.0: USB hub found [ 2.061065] hub 4-0:1.0: 2 ports detected [ 2.063034] usbcore: registered new interface driver usb-storage [ 2.065070] usbcore: registered new interface driver usbserial_generic [ 2.067360] usbserial: USB Serial support registered for generic [ 2.069055] usbcore: registered new interface driver ftdi_sio [ 2.070180] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.071723] usbcore: registered new interface driver pl2303 [ 2.072888] usbserial: USB Serial support registered for pl2303 [ 2.074131] i8042: PNP: No PS/2 controller found. [ 2.075539] mousedev: PS/2 mouse device common for all mice [ 2.085174] rtc_cmos 00:04: RTC can wake from S4 [ 2.087733] rtc_cmos 00:04: registered as rtc0 [ 2.089810] rtc_cmos 00:04: setting system clock to 2023-01-05T16:26:31 UTC (1672935991) [ 2.091562] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 2.093781] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.095112] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 2.096237] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 2.099004] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 2.119265] intel_pstate: CPU model not supported [ 2.120990] sdhci: Secure Digital Host Controller Interface driver [ 2.122206] sdhci: Copyright(c) Pierre Ossman [ 2.123133] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.124543] usbcore: registered new interface driver usbhid [ 2.125632] usbhid: USB HID core driver [ 2.126628] u32 classifier [ 2.127180] input device check on [ 2.127879] Actions configured [ 2.129048] NET: Registered PF_INET6 protocol family [ 2.131630] Segment Routing with IPv6 [ 2.132470] In-situ OAM (IOAM) with IPv6 [ 2.133307] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.134861] NET: Registered PF_PACKET protocol family [ 2.135922] Bridge firewalling registered [ 2.136763] Key type dns_resolver registered [ 2.138176] NET: Registered PF_VSOCK protocol family [ 2.141003] IPI shorthand broadcast: enabled [ 2.142185] sched_clock: Marking stable (1957446062, 184433243)->(2655170896, -513291591) [ 2.144352] Loading compiled-in X.509 certificates [ 2.160908] Key type ._fscrypt registered [ 2.161813] Key type .fscrypt registered [ 2.162644] Key type fscrypt-provisioning registered [ 2.168337] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.171027] Key type encrypted registered [ 2.176036] printk: console [netcon0] enabled [ 2.176980] netconsole: network logging started [ 2.235606] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.261748] ata4: SATA link down (SStatus 0 SControl 300) [ 2.265640] ata5: SATA link down (SStatus 0 SControl 300) [ 2.279656] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.303710] ata1: SATA link down (SStatus 0 SControl 300) [ 2.305025] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.306171] ata3.00: applying bridge limits [ 2.321846] ata2: SATA link down (SStatus 0 SControl 300) [ 2.326703] ata6: SATA link down (SStatus 0 SControl 300) [ 2.328406] ata3.00: configured for UDMA/100 [ 2.333597] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.373061] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.375141] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.462711] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 2.465337] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.484646] IP-Config: Complete: [ 2.485398] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 2.487294] host=192.168.7.2, domain=, nis-domain=(none) [ 2.488395] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.488399] nameserver0=8.8.8.8 [ 2.496357] md: Waiting for all devices to be available before autodetect [ 2.497387] md: If you don't use raid, use raid=noautodetect [ 2.498207] md: Autodetecting RAID arrays. [ 2.498797] md: autorun ... [ 2.499207] md: ... autorun DONE. [ 2.518900] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 2.521995] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.523285] devtmpfs: mounted [ 2.527481] Freeing unused kernel image (initmem) memory: 1936K [ 2.530335] Write protecting the kernel read-only data: 22528k [ 2.533775] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.536872] Freeing unused kernel image (rodata/data gap) memory: 364K [ 2.538651] Run /sbin/init as init process INIT: version 3.04 booting [ 2.581645] usb 1-2: new high-speed USB device number 3 using ehci-pci warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 2.818454] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 Starting udev [ 2.873721] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.882744] udevd[172]: starting version 3.2.11 [ 2.897759] udevd[173]: starting eudev-3.2.11 [ 3.015654] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.487057] EXT4-fs (vda): re-mounted. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.4 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 5 16:26:33 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC2DFM6Qz5Z+iJMz0K0xiPEMZ0T9xSK//DSRvExZoPe74g1kqwqz2Exy31/Q5EqAv77K2FkXR//0X9zz77B1XpJPg65WZ1yrzYYIPRnn+dZ/hkfWI7+s1O/B0v1IIy9tRpTHMIlatI7rhF5B3WX5W4QRQ/5HKFlbElPrGhrgyGrguBGYb5Sb306nBMEDLoYlHUHXuI/W4yvpmuyfTOPmopUUvZYz4jK66MFPvVo8+KtPtMcsaPpKSulctF0Yp7VD6klWXyx4G0fEzq4RnThLtnyUESFvaOM9ryqe4+eGa2V1JwffRR8iwRoRNdtln0rEJDR8n2mtEpS/g97097aBTmN root@qemux86-64 Fingerprint: SHA256:tdE66tfOENXl68EHwO/4AolPqx8bFCPGWt2sn1jBmRc dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ 5.707676] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.716314] Bluetooth: BNEP filters: protocol multicast [ 5.716340] Bluetooth: BNEP socket layer initialized ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1.1 qemux86-64 /dev/ttyS0 qemux86-64 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-XueXzGUyHK,guid=b11eeebdf8ff8487f8be636663b6fa3c Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu [settings daemon] Forking. run with -n to prevent fork libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu dbus-daemon[680]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=685 comm="matchbox-desktop") dbus-daemon[680]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (connman-applet:654): Gdk-[1;35mCRITICAL[0m **: [34m16:26:38.840[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed