[    0.013137] landlock: Up and running.
[    0.017172] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.017263] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.040459] CPU: Testing write buffer coherency: ok
[    0.043887] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.044079] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.057360] /cpus/cpu@0 missing clock-frequency property
[    0.057803] /cpus/cpu@1 missing clock-frequency property
[    0.057908] /cpus/cpu@2 missing clock-frequency property
[    0.058007] /cpus/cpu@3 missing clock-frequency property
[    0.058304] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.074174] cblist_init_generic: Setting adjustable number of callback queues.
[    0.074353] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.075020] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.075740] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.077007] Setting up static identity map for 0x40200000 - 0x40200060
[    0.078484] rcu: Hierarchical SRCU implementation.
[    0.078540] rcu: 	Max phase no-delay instances is 1000.
[    0.085947] smp: Bringing up secondary CPUs ...
[    0.094161] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.094306] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.102336] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.102424] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.106608] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.106662] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.107336] smp: Brought up 1 node, 4 CPUs
[    0.107469] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.107564] CPU: All CPU(s) started in SVC mode.
[    0.123296] devtmpfs: initialized
[    0.140192] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.166687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.167765] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.196028] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.201514] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.221744] cpuidle: using governor ladder
[    0.224469] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.224580] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.226350] Serial: AMBA PL011 UART driver
[    0.271621] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.282169] printk: console [ttyAMA0] enabled
[    0.347378] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.356286] cryptd: max_cpu_qlen set to 1000
[    0.525875] raid6: neonx8   gen()   518 MB/s
[    0.697483] raid6: neonx4   gen()  1523 MB/s
[    0.869265] raid6: neonx2   gen()  1524 MB/s
[    1.041132] raid6: neonx1   gen()   373 MB/s
[    1.213954] raid6: int32x8  gen()   118 MB/s
[    1.386627] raid6: int32x4  gen()    87 MB/s
[    1.558577] raid6: int32x2  gen()   412 MB/s
[    1.731900] raid6: int32x1  gen()   436 MB/s
[    1.732154] raid6: using algorithm neonx2 gen() 1524 MB/s
[    1.904873] raid6: .... xor() 705 MB/s, rmw enabled
[    1.905199] raid6: using neon recovery algorithm
[    1.912821] SCSI subsystem initialized
[    1.914277] usbcore: registered new interface driver usbfs
[    1.915076] usbcore: registered new interface driver hub
[    1.915529] usbcore: registered new device driver usb
[    1.916420] pps_core: LinuxPPS API ver. 1 registered
[    1.916567] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.916937] PTP clock support registered
[    1.934364] vgaarb: loaded
[    1.940804] clocksource: Switched to clocksource arch_sys_counter
[    2.005529] NET: Registered PF_INET protocol family
[    2.007872] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.021834] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.022164] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.022399] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    2.022786] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.023364] TCP: Hash tables configured (established 8192 bind 8192)
[    2.025134] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.025537] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.028072] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.033407] RPC: Registered named UNIX socket transport module.
[    2.033595] RPC: Registered udp transport module.
[    2.033699] RPC: Registered tcp transport module.
[    2.033799] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.034040] PCI: CLS 0 bytes, default 64
[    2.236660] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.267907] NFS: Registering the id_resolver key type
[    2.269397] Key type id_resolver registered
[    2.269578] Key type id_legacy registered
[    2.275418] Key type cifs.idmap registered
[    2.381285] xor: measuring software checksum speed
[    2.394612]    arm4regs        :   791 MB/sec
[    2.405564]    8regs           :   939 MB/sec
[    2.417055]    32regs          :   888 MB/sec
[    2.426774]    neon            :  1068 MB/sec
[    2.426943] xor: using function: neon (1068 MB/sec)
[    2.427142] async_tx: api initialized (async)
[    2.428229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.428522] io scheduler mq-deadline registered
[    2.428739] io scheduler kyber registered
[    2.436036] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.437072] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.437996] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.439583] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.442121] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.442557] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.442787] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.442961] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.444759] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    2.449194] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    2.449716] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    2.450304] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.451446] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    2.451653] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    2.453206] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    2.453416] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.453595] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.456135] PCI: bus0: Fast back to back transfers disabled
[    2.458035] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    2.458532] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    2.458818] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    2.459056] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    2.459247] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    2.461077] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.475172] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.478280] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.509162] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.510292] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.510337] [drm] features: -context_init
[    2.515714] [drm] number of scanouts: 1
[    2.515996] printk: console [hvc0] enabled
[    2.526451] [drm] number of cap sets: 0
[    2.540530] [drm] Initialized virtio_gpu 0.1.0 0 for virtio4 on minor 0
[    2.606787] virtio_gpu virtio4: [drm] drm_plane_enable_fb_damage_clips() not called
[    2.647301] Console: switching to colour frame buffer device 160x50
[    2.659837] virtio_gpu virtio4: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.713326] brd: module loaded
[    2.714486] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.721133] virtio_blk virtio1: [vda] 5036704 512-byte logical blocks (2.58 GB/2.40 GiB)
[    2.746792] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.747690] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.753022] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.757990] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.758307] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.758646] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.769051] hub 1-0:1.0: USB hub found
[    2.770514] hub 1-0:1.0: 4 ports detected
[    2.777193] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.780445] hub 2-0:1.0: USB hub found
[    2.780990] hub 2-0:1.0: 4 ports detected
[    2.791284] rtc-pl031 9010000.pl031: registered as rtc0
[    2.792491] rtc-pl031 9010000.pl031: setting system clock to 2023-01-05T18:57:03 UTC (1672945023)
[    2.796716] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.802113] usbcore: registered new interface driver usbhid
[    2.802387] usbhid: USB HID core driver
[    2.803265] u32 classifier
[    2.803466]     input device check on
[    2.803650]     Actions configured
[    2.806581] NET: Registered PF_INET6 protocol family
[    2.823012] Segment Routing with IPv6
[    2.823571] In-situ OAM (IOAM) with IPv6
[    2.824718] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.828950] NET: Registered PF_PACKET protocol family
[    2.830631] Bridge firewalling registered
[    2.832227] Key type dns_resolver registered
[    2.833620] NET: Registered PF_VSOCK protocol family
[    2.835144] Registering SWP/SWPB emulation handler
[    2.868281] Key type ._fscrypt registered
[    2.868628] Key type .fscrypt registered
[    2.868829] Key type fscrypt-provisioning registered
[    2.876815] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.880742] Key type encrypted registered
[    2.918827] printk: console [netcon0] enabled
[    2.919194] netconsole: network logging started
[    2.981059] IP-Config: Complete:
[    2.981661]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.982751]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.983180]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.983280]      nameserver0=8.8.8.8
[    2.995331] md: Waiting for all devices to be available before autodetect
[    2.995653] md: If you don't use raid, use raid=noautodetect
[    2.995909] md: Autodetecting RAID arrays.
[    2.996139] md: autorun ...
[    2.996327] md: ... autorun DONE.
[    3.044176] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    3.046484] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.051407] devtmpfs: mounted
[    3.150555] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.207172] Freeing unused kernel image (initmem) memory: 2048K
[    3.332311] Run /sbin/init as init process
[    3.457825] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.460476] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
INIT: version 3.04 booting
[    3.621324] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.838605] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.911534] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    5.674808] udevd[176]: starting version 3.2.11
[    5.789230] udevd[177]: starting eudev-3.2.11
[    8.139474] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    8.610269] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 5.19.17-yocto-standard #1 SMP PREEMPT Fri Nov 18 22:04:06 UTC 2022 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan  5 18:57:16 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-nptxeAre7q,guid=8424a2dc9a2f8689dab2946d63b71d8e
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: Using calibration data stored in /etc/pointercal.xinput
OK
Starting tcf-agent: Using calibration data stored in /etc/pointercal.xinput
OK
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop


Poky (Yocto Project Reference Distro) 4.1.1 qemuarm hvc0

qemuarm login: [settings daemon] Forking. run with -n to prevent fork
dbus-daemon[678]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=693 comm="matchbox-panel --start-applets showdesktop,windows")
matchbox-wm: X error warning (0xa00003): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[678]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(connman-applet:639): Gdk-[1;35mCRITICAL[0m **: [34m18:57:26.423[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
[ 1384.590784] hellomod: loading out-of-tree module taints kernel.
[ 1384.607886] Hello world!
[ 1387.725106] Cleaning up hellomod.
