[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a7f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a80-0x0000000000ad3aaf] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3ab0-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 413703592 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000004] tsc: Detected 2599.996 MHz processor
[    0.000874] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.000895] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004339] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.004467] ACPI: Early table checksum verification disabled
[    0.004469] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.004474] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004478] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004482] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004484] ACPI: FACS 0x000000000FFE0000 000040
[    0.004486] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004489] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004491] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004493] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004495] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.004496] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.004497] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.004497] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.004498] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.004498] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.004499] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.004527] Zone ranges:
[    0.004528]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004529]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.004530]   Normal   empty
[    0.004531] Movable zone start for each node
[    0.004532] Early memory node ranges
[    0.004532]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.004533]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.004534] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.004910] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004924] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.005497] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.005717] ACPI: PM-Timer IO Port: 0x608
[    0.005722] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.005739] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.005741] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.005742] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.005743] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.005744] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.005745] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.005747] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.005748] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.005750] TSC deadline timer available
[    0.005751] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.005762] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.005763] Booting paravirtualized kernel on KVM
[    0.005764] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.005767] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.006252] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.006273] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.006275] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.006345] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.006365] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.006843] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.007563] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved)
[    0.007595] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.007600] Kernel/User page tables isolation: enabled
[    0.007608] ftrace: allocating 47075 entries in 184 pages
[    0.014163] ftrace: allocated 184 pages with 4 groups
[    0.014186] Dynamic Preempt: full
[    0.014568] rcu: Preemptible hierarchical RCU implementation.
[    0.014569] rcu: 	RCU event tracing is enabled.
[    0.014569] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014570] 	All grace periods are expedited (rcu_expedited).
[    0.014571] 	Trampoline variant of Tasks RCU enabled.
[    0.014571] 	Rude variant of Tasks RCU enabled.
[    0.014572] 	Tracing variant of Tasks RCU enabled.
[    0.014572] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014573] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.018264] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018414] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018467] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.018474] random: crng init done
[    0.021038] Console: colour VGA+ 80x25
[    0.066025] printk: console [ttyS0] enabled
[    0.066263] ACPI: Core revision 20220331
[    0.066570] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.067125] APIC: Switch to symmetric I/O mode setup
[    0.067507] x2apic enabled
[    0.067782] Switched APIC routing to physical x2apic.
[    0.068576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068945] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.069601] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.070058] pid_max: default: 32768 minimum: 301
[    0.070615] LSM: Security Framework initializing
[    0.070898] landlock: Up and running.
[    0.071120] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.071603] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.072743] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.073080] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.073410] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.073605] Spectre V2 : Mitigation: Retpolines
[    0.073881] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.074602] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.074997] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.075603] RETBleed: Vulnerable
[    0.075785] Speculative Store Bypass: Vulnerable
[    0.076070] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.076429] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.076602] SRBDS: Unknown: Dependent on hypervisor status
[    0.089816] Freeing SMP alternatives memory: 52K
[    0.090150] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.090601] cblist_init_generic: Setting adjustable number of callback queues.
[    0.090603] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.090977] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.091324] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.091614] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.092178] rcu: Hierarchical SRCU implementation.
[    0.092456] rcu: 	Max phase no-delay instances is 400.
[    0.092781] smp: Bringing up secondary CPUs ...
[    0.093107] x86: Booting SMP configuration:
[    0.093606] .... node  #0, CPUs:      #1 #2 #3
[    0.094622] smp: Brought up 1 node, 4 CPUs
[    0.095163] smpboot: Max logical packages: 1
[    0.095455] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.095855] devtmpfs: initialized
[    0.096006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.096607] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.097077] pinctrl core: initialized pinctrl subsystem
[    0.097761] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.098267] thermal_sys: Registered thermal governor 'step_wise'
[    0.098269] thermal_sys: Registered thermal governor 'user_space'
[    0.098633] cpuidle: using governor menu
[    0.099370] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.099606] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.100063] PCI: Using configuration type 1 for base access
[    0.101507] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.118603] raid6: avx2x4   gen() 30665 MB/s
[    0.135603] raid6: avx2x2   gen() 30729 MB/s
[    0.152603] raid6: avx2x1   gen() 27886 MB/s
[    0.152876] raid6: using algorithm avx2x2 gen() 30729 MB/s
[    0.169602] raid6: .... xor() 19357 MB/s, rmw enabled
[    0.169960] raid6: using avx2x2 recovery algorithm
[    0.170301] ACPI: Added _OSI(Module Device)
[    0.170576] ACPI: Added _OSI(Processor Device)
[    0.170605] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.170904] ACPI: Added _OSI(Processor Aggregator Device)
[    0.171261] ACPI: Added _OSI(Linux-Dell-Video)
[    0.171527] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.171604] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.172676] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.173741] ACPI: Interpreter enabled
[    0.174053] ACPI: PM: (supports S0 S3 S5)
[    0.174357] ACPI: Using IOAPIC for interrupt routing
[    0.174622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.175221] PCI: Using E820 reservations for host bridge windows
[    0.175687] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.178332] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.178608] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.179232] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.179652] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.180134] PCI host bridge to bus 0000:00
[    0.180429] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180604] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.181094] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.181604] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.182101] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.182600] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.183134] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.183536] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.183945] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.185275] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.186604] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.190299] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.191604] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.192963] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.194102] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.195066] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.197543] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.198844] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.201606] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.204198] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.205607] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.208051] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.208537] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.208958] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.210605] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.211604] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.218113] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.220019] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.221605] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.222731] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.225411] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.226462] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.228268] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.229369] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.229975] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.233272] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.233888] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.234569] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.237230] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.238230] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.239739] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.241926] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.244623] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.245091] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.245529] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.245657] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.246085] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.246584] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.246657] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.247656] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.248054] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.248446] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.248623] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.249026] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.249450] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.249612] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.250025] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.250454] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.250950] SCSI subsystem initialized
[    0.251253] ACPI: bus type USB registered
[    0.251622] usbcore: registered new interface driver usbfs
[    0.252018] usbcore: registered new interface driver hub
[    0.252369] usbcore: registered new device driver usb
[    0.252615] pps_core: LinuxPPS API ver. 1 registered
[    0.252946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.253608] PTP clock support registered
[    0.253925] Bluetooth: Core ver 2.22
[    0.254069] NET: Registered PF_BLUETOOTH protocol family
[    0.254605] Bluetooth: HCI device and connection manager initialized
[    0.255065] Bluetooth: HCI socket layer initialized
[    0.255382] Bluetooth: L2CAP socket layer initialized
[    0.255608] Bluetooth: SCO socket layer initialized
[    0.255934] PCI: Using ACPI for IRQ routing
[    0.287679] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.288074] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.288436] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.288605] vgaarb: loaded
[    0.288823] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.289186] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.292721] clocksource: Switched to clocksource kvm-clock
[    0.293243] pnp: PnP ACPI init
[    0.293541] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.294229] pnp: PnP ACPI: found 6 devices
[    0.300857] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.301446] NET: Registered PF_INET protocol family
[    0.301821] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.302998] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.303578] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.304062] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.304517] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.305000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.305429] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.305893] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.306356] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.306984] RPC: Registered named UNIX socket transport module.
[    0.307421] RPC: Registered udp transport module.
[    0.307689] RPC: Registered tcp transport module.
[    0.307981] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.308378] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.308728] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.309106] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.309485] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.309866] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.310282] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.310903] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.311901] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.312784] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.313644] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.315574] PCI: CLS 0 bytes, default 64
[    0.315991] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.316552] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.317758] Initialise system trusted keyrings
[    0.318194] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.319984] NFS: Registering the id_resolver key type
[    0.320338] Key type id_resolver registered
[    0.320568] Key type id_legacy registered
[    0.321124] Key type cifs.idmap registered
[    0.329621] xor: automatically using best checksumming function   avx       
[    0.334214] Key type asymmetric registered
[    0.334458] Asymmetric key parser 'x509' registered
[    0.334777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.335262] io scheduler mq-deadline registered
[    0.335528] io scheduler kyber registered
[    0.336150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.337754] ACPI: button: Power Button [PWRF]
[    0.338586] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.339807] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.340850] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.341923] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.352575] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.353135] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.353751] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.354335] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.358846] Linux agpgart interface v0.103
[    0.359224] ACPI: bus type drm_connector registered
[    0.359634] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.359970] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.365100] Console: switching to colour dummy device 80x25
[    0.365567] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.365568] [drm] features: -context_init
[    0.366634] [drm] number of scanouts: 1
[    0.366888] [drm] number of cap sets: 0
[    0.367424] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.370429] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.372315] Console: switching to colour frame buffer device 160x50
[    0.396578] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.398644] brd: module loaded
[    0.399843] loop: module loaded
[    0.400148] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.401279] virtio_blk virtio3: [vda] 263172 512-byte logical blocks (135 MB/129 MiB)
[    0.428561] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.429114] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.430556] scsi host0: ahci
[    0.430977] scsi host1: ahci
[    0.431420] scsi host2: ahci
[    0.431812] scsi host3: ahci
[    0.432187] scsi host4: ahci
[    0.432542] scsi host5: ahci
[    0.432784] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.433257] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.433687] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.434104] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.434520] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.434943] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.436368] e100: Intel(R) PRO/100 Network Driver
[    0.436689] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.437102] e1000: Intel(R) PRO/1000 Network Driver
[    0.437424] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.437792] e1000e: Intel(R) PRO/1000 Network Driver
[    0.438185] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.438538] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.438861] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.439244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.439656] ehci-pci: EHCI PCI platform driver
[    0.440383] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.440734] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.441274] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.448626] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.449141] hub 1-0:1.0: USB hub found
[    0.449397] hub 1-0:1.0: 6 ports detected
[    0.449793] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.450192] ohci-pci: OHCI PCI platform driver
[    0.450450] uhci_hcd: USB Universal Host Controller Interface driver
[    0.451320] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.451683] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.452183] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.452694] hub 2-0:1.0: USB hub found
[    0.452979] hub 2-0:1.0: 2 ports detected
[    0.453772] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.454157] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.454649] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.455215] hub 3-0:1.0: USB hub found
[    0.455492] hub 3-0:1.0: 2 ports detected
[    0.456335] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.456690] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.457253] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.457717] hub 4-0:1.0: USB hub found
[    0.457987] hub 4-0:1.0: 2 ports detected
[    0.458341] usbcore: registered new interface driver usb-storage
[    0.458804] usbcore: registered new interface driver usbserial_generic
[    0.459265] usbserial: USB Serial support registered for generic
[    0.459672] usbcore: registered new interface driver ftdi_sio
[    0.460066] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.460525] usbcore: registered new interface driver pl2303
[    0.461122] usbserial: USB Serial support registered for pl2303
[    0.461480] i8042: PNP: No PS/2 controller found.
[    0.461836] mousedev: PS/2 mouse device common for all mice
[    0.462371] rtc_cmos 00:04: RTC can wake from S4
[    0.463038] rtc_cmos 00:04: registered as rtc0
[    0.463392] rtc_cmos 00:04: setting system clock to 2023-01-06T00:44:06 UTC (1672965846)
[    0.463943] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.464636] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.465053] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.465377] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.466114] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.466784] intel_pstate: CPU model not supported
[    0.467159] sdhci: Secure Digital Host Controller Interface driver
[    0.467589] sdhci: Copyright(c) Pierre Ossman
[    0.467919] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.468371] usbcore: registered new interface driver usbhid
[    0.468747] usbhid: USB HID core driver
[    0.469011] u32 classifier
[    0.469181]     input device check on
[    0.469414]     Actions configured
[    0.469751] NET: Registered PF_INET6 protocol family
[    0.470398] Segment Routing with IPv6
[    0.470777] In-situ OAM (IOAM) with IPv6
[    0.471071] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.471569] NET: Registered PF_PACKET protocol family
[    0.471934] Bridge firewalling registered
[    0.472216] Key type dns_resolver registered
[    0.472609] NET: Registered PF_VSOCK protocol family
[    0.473285] IPI shorthand broadcast: enabled
[    0.473618] sched_clock: Marking stable (424056721, 49183661)->(542809014, -69568632)
[    0.474340] Loading compiled-in X.509 certificates
[    0.475236] Key type ._fscrypt registered
[    0.475550] Key type .fscrypt registered
[    0.475775] Key type fscrypt-provisioning registered
[    0.476321] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.477290] Key type encrypted registered
[    0.478660] printk: console [netcon0] enabled
[    0.478960] netconsole: network logging started
[    0.692694] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.746017] ata4: SATA link down (SStatus 0 SControl 300)
[    0.746474] ata2: SATA link down (SStatus 0 SControl 300)
[    0.746926] ata5: SATA link down (SStatus 0 SControl 300)
[    0.747382] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.747967] ata6: SATA link down (SStatus 0 SControl 300)
[    0.748383] ata1: SATA link down (SStatus 0 SControl 300)
[    0.748784] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.749183] ata3.00: applying bridge limits
[    0.749574] ata3.00: configured for UDMA/100
[    0.750120] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.788902] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.789329] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.818654] IP-Config: Complete:
[    0.818894]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    0.819545]      host=192.168.7.8, domain=, nis-domain=(none)
[    0.819891]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.819892]      nameserver0=8.8.8.8
[    0.820846] md: Waiting for all devices to be available before autodetect
[    0.821156] md: If you don't use raid, use raid=noautodetect
[    0.821398] md: Autodetecting RAID arrays.
[    0.821576] md: autorun ...
[    0.821699] md: ... autorun DONE.
[    0.822844] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    0.823268] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.823731] devtmpfs: mounted
[    0.824974] Freeing unused kernel image (initmem) memory: 1936K
[    0.825104] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    0.825895] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    0.834691] Write protecting the kernel read-only data: 22528k
[    0.835710] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.836220] Freeing unused kernel image (rodata/data gap) memory: 364K
[    0.836649] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    0.892499] udevd[167]: starting version 3.2.11
[    0.896196] udevd[168]: starting eudev-3.2.11
[    0.940652] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.073376] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.125826] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.188425] EXT4-fs (vda): re-mounted. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
[    1.442666] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
[    3.260760] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
starting 8 nfsd kernel threads: [    4.307106] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    4.308375] NFSD: Using legacy client tracking operations.
[    4.309026] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0

qemux86-64 login: 