[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 372080687 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2599.992 MHz processor [ 0.000917] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.000949] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008630] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.008765] ACPI: Early table checksum verification disabled [ 0.008777] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.008784] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008798] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008821] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008825] ACPI: FACS 0x000000001FFE0000 000040 [ 0.008828] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008832] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008835] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008839] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008841] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df] [ 0.008843] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb] [ 0.008844] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.008845] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f] [ 0.008845] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7] [ 0.008846] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3] [ 0.008847] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b] [ 0.008897] Zone ranges: [ 0.008898] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008900] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.008901] Normal empty [ 0.008902] Movable zone start for each node [ 0.008903] Early memory node ranges [ 0.008903] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.008904] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.008906] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.009359] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009374] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.011219] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.011673] ACPI: PM-Timer IO Port: 0x608 [ 0.011683] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.011717] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.011721] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.011723] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.011724] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.011726] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.011727] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.011734] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.011736] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.011739] TSC deadline timer available [ 0.011740] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.011770] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.011771] Booting paravirtualized kernel on KVM [ 0.011774] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.011778] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.012389] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.012422] Built 1 zonelists, mobility grouping on. Total pages: 128727 [ 0.012424] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.012562] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.012606] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.013216] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014434] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved) [ 0.014484] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014490] Kernel/User page tables isolation: enabled [ 0.014502] ftrace: allocating 47075 entries in 184 pages [ 0.024112] ftrace: allocated 184 pages with 4 groups [ 0.024168] Dynamic Preempt: full [ 0.024629] rcu: Preemptible hierarchical RCU implementation. [ 0.024629] rcu: RCU event tracing is enabled. [ 0.024630] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.024631] All grace periods are expedited (rcu_expedited). [ 0.024632] Trampoline variant of Tasks RCU enabled. [ 0.024633] Rude variant of Tasks RCU enabled. [ 0.024633] Tracing variant of Tasks RCU enabled. [ 0.024634] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.024635] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.028972] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.029144] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.029253] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.029263] random: crng init done [ 0.035453] Console: colour VGA+ 80x25 [ 0.131684] printk: console [ttyS0] enabled [ 0.132218] ACPI: Core revision 20220331 [ 0.132851] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.134063] APIC: Switch to symmetric I/O mode setup [ 0.134876] x2apic enabled [ 0.135494] Switched APIC routing to physical x2apic. [ 0.137166] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137933] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns [ 0.139231] Calibrating delay loop (skipped) preset value.. 5199.98 BogoMIPS (lpj=2599992) [ 0.140232] pid_max: default: 32768 minimum: 301 [ 0.140821] LSM: Security Framework initializing [ 0.141241] landlock: Up and running. [ 0.142233] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.143235] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.144526] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.145235] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.145978] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.146233] Spectre V2 : Mitigation: Retpolines [ 0.146785] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.147232] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.148232] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible! [ 0.149232] RETBleed: Vulnerable [ 0.149657] Speculative Store Bypass: Vulnerable [ 0.150233] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.151232] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.152232] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.153232] SRBDS: Unknown: Dependent on hypervisor status [ 0.169795] Freeing SMP alternatives memory: 52K [ 0.170367] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.171379] cblist_init_generic: Setting adjustable number of callback queues. [ 0.172233] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.173012] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.173251] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.174033] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only. [ 0.174276] rcu: Hierarchical SRCU implementation. [ 0.174864] rcu: Max phase no-delay instances is 400. [ 0.175483] smp: Bringing up secondary CPUs ... [ 0.176167] x86: Booting SMP configuration: [ 0.176236] .... node #0, CPUs: #1 #2 #3 [ 0.176534] smp: Brought up 1 node, 4 CPUs [ 0.177730] smpboot: Max logical packages: 1 [ 0.178234] smpboot: Total of 4 processors activated (20799.93 BogoMIPS) [ 0.179301] devtmpfs: initialized [ 0.179789] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.180238] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.181131] pinctrl core: initialized pinctrl subsystem [ 0.181960] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.182342] thermal_sys: Registered thermal governor 'step_wise' [ 0.182344] thermal_sys: Registered thermal governor 'user_space' [ 0.183239] cpuidle: using governor menu [ 0.183863] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.185241] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.186095] PCI: Using configuration type 1 for base access [ 0.188527] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.206232] raid6: avx2x4 gen() 29172 MB/s [ 0.223233] raid6: avx2x2 gen() 29173 MB/s [ 0.240232] raid6: avx2x1 gen() 25460 MB/s [ 0.240772] raid6: using algorithm avx2x2 gen() 29173 MB/s [ 0.258233] raid6: .... xor() 18121 MB/s, rmw enabled [ 0.259234] raid6: using avx2x2 recovery algorithm [ 0.259874] ACPI: Added _OSI(Module Device) [ 0.260234] ACPI: Added _OSI(Processor Device) [ 0.260769] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.261233] ACPI: Added _OSI(Processor Aggregator Device) [ 0.261916] ACPI: Added _OSI(Linux-Dell-Video) [ 0.262233] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.262902] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.264026] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.265328] ACPI: Interpreter enabled [ 0.265801] ACPI: PM: (supports S0 S3 S5) [ 0.266235] ACPI: Using IOAPIC for interrupt routing [ 0.266874] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.267234] PCI: Using E820 reservations for host bridge windows [ 0.268061] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.269872] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.270238] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.271270] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.272085] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.272286] PCI host bridge to bus 0000:00 [ 0.272837] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.273234] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.274093] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.274233] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.275172] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.275234] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.276185] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.276286] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.277570] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.279240] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.280984] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.284234] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.286704] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.287880] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.289234] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.290663] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.293710] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.296282] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.297687] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.300254] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.301687] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.305251] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.306205] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.306908] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.308234] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.309684] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.312786] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.314822] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.316669] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.317974] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.319916] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.321398] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.323515] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.324856] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.325583] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.328094] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.328678] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.329461] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.332786] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.333835] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.335554] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.339034] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.340222] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.340306] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.341115] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.341301] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.342102] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.342301] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.343107] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.343298] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.344075] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.344243] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.344974] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.345241] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.345962] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.346241] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.347242] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.348005] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.348750] SCSI subsystem initialized [ 0.349306] ACPI: bus type USB registered [ 0.349784] usbcore: registered new interface driver usbfs [ 0.350250] usbcore: registered new interface driver hub [ 0.350894] usbcore: registered new device driver usb [ 0.351246] pps_core: LinuxPPS API ver. 1 registered [ 0.351828] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.352235] PTP clock support registered [ 0.352728] Bluetooth: Core ver 2.22 [ 0.353251] NET: Registered PF_BLUETOOTH protocol family [ 0.353901] Bluetooth: HCI device and connection manager initialized [ 0.354239] Bluetooth: HCI socket layer initialized [ 0.354838] Bluetooth: L2CAP socket layer initialized [ 0.355237] Bluetooth: SCO socket layer initialized [ 0.355858] PCI: Using ACPI for IRQ routing [ 0.412092] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.412092] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.412231] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.412236] vgaarb: loaded [ 0.412608] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.413203] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.418297] clocksource: Switched to clocksource kvm-clock [ 0.419170] pnp: PnP ACPI init [ 0.419667] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.420762] pnp: PnP ACPI: found 6 devices [ 0.428919] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.430066] NET: Registered PF_INET protocol family [ 0.430706] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.431911] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.432985] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.434104] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.435104] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.435973] TCP: Hash tables configured (established 4096 bind 4096) [ 0.436776] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.437566] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.438432] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.439359] RPC: Registered named UNIX socket transport module. [ 0.440095] RPC: Registered udp transport module. [ 0.440667] RPC: Registered tcp transport module. [ 0.441239] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.442017] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.442756] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.443496] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.444318] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.445133] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.445974] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.447116] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.448490] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.449755] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.451001] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.452269] PCI: CLS 0 bytes, default 64 [ 0.452911] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.453956] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a34a6eea, max_idle_ns: 440795264358 ns [ 0.456661] Initialise system trusted keyrings [ 0.457290] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.459409] NFS: Registering the id_resolver key type [ 0.460040] Key type id_resolver registered [ 0.460545] Key type id_legacy registered [ 0.461329] Key type cifs.idmap registered [ 0.470649] xor: automatically using best checksumming function avx [ 0.471547] Key type asymmetric registered [ 0.472047] Asymmetric key parser 'x509' registered [ 0.472643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.473526] io scheduler mq-deadline registered [ 0.474068] io scheduler kyber registered [ 0.474890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.479262] ACPI: button: Power Button [PWRF] [ 0.480292] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.482032] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.483736] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.486211] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.487694] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.488611] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.489730] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.490818] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.492787] Linux agpgart interface v0.103 [ 0.493409] ACPI: bus type drm_connector registered [ 0.494134] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.494825] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.503496] Console: switching to colour dummy device 80x25 [ 0.504385] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.504387] [drm] features: -context_init [ 0.506311] [drm] number of scanouts: 1 [ 0.506816] [drm] number of cap sets: 0 [ 0.507615] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.511352] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.512914] Console: switching to colour frame buffer device 160x50 [ 0.543106] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.545793] brd: module loaded [ 0.547363] loop: module loaded [ 0.547873] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.549967] virtio_blk virtio3: [vda] 782896 512-byte logical blocks (401 MB/382 MiB) [ 0.552732] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.553756] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.555768] scsi host0: ahci [ 0.556461] scsi host1: ahci [ 0.557079] scsi host2: ahci [ 0.557694] scsi host3: ahci [ 0.558275] scsi host4: ahci [ 0.558878] scsi host5: ahci [ 0.559347] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.560374] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.561243] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.562137] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.563037] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.563929] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.566248] e100: Intel(R) PRO/100 Network Driver [ 0.566851] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.567570] e1000: Intel(R) PRO/1000 Network Driver [ 0.568153] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.568856] e1000e: Intel(R) PRO/1000 Network Driver [ 0.569457] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.570162] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.570797] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.571467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.572255] ehci-pci: EHCI PCI platform driver [ 0.573359] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.574005] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.575043] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.582277] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.583193] hub 1-0:1.0: USB hub found [ 0.583702] hub 1-0:1.0: 6 ports detected [ 0.584374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.585147] ohci-pci: OHCI PCI platform driver [ 0.585704] uhci_hcd: USB Universal Host Controller Interface driver [ 0.587628] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.588578] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.590356] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.591656] hub 2-0:1.0: USB hub found [ 0.596341] hub 2-0:1.0: 2 ports detected [ 0.597483] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.598139] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.599124] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.600103] hub 3-0:1.0: USB hub found [ 0.600593] hub 3-0:1.0: 2 ports detected [ 0.601710] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.602381] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.603487] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.604472] hub 4-0:1.0: USB hub found [ 0.604957] hub 4-0:1.0: 2 ports detected [ 0.605726] usbcore: registered new interface driver usb-storage [ 0.606507] usbcore: registered new interface driver usbserial_generic [ 0.607299] usbserial: USB Serial support registered for generic [ 0.608034] usbcore: registered new interface driver ftdi_sio [ 0.608819] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.609747] usbcore: registered new interface driver pl2303 [ 0.610439] usbserial: USB Serial support registered for pl2303 [ 0.611163] i8042: PNP: No PS/2 controller found. [ 0.611835] mousedev: PS/2 mouse device common for all mice [ 0.612711] rtc_cmos 00:04: RTC can wake from S4 [ 0.613726] rtc_cmos 00:04: registered as rtc0 [ 0.614345] rtc_cmos 00:04: setting system clock to 2023-01-06T00:23:16 UTC (1672964596) [ 0.615339] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.616527] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.617294] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.617977] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.619135] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.620274] intel_pstate: CPU model not supported [ 0.620865] sdhci: Secure Digital Host Controller Interface driver [ 0.621612] sdhci: Copyright(c) Pierre Ossman [ 0.622150] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.622899] usbcore: registered new interface driver usbhid [ 0.623611] usbhid: USB HID core driver [ 0.624123] u32 classifier [ 0.624456] input device check on [ 0.624901] Actions configured [ 0.625439] NET: Registered PF_INET6 protocol family [ 0.626852] Segment Routing with IPv6 [ 0.627354] In-situ OAM (IOAM) with IPv6 [ 0.627832] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.628636] NET: Registered PF_PACKET protocol family [ 0.629338] Bridge firewalling registered [ 0.629888] Key type dns_resolver registered [ 0.630493] NET: Registered PF_VSOCK protocol family [ 0.631457] IPI shorthand broadcast: enabled [ 0.632016] sched_clock: Marking stable (525317869, 106080915)->(690220874, -58822090) [ 0.633108] Loading compiled-in X.509 certificates [ 0.633830] Key type ._fscrypt registered [ 0.634334] Key type .fscrypt registered [ 0.634810] Key type fscrypt-provisioning registered [ 0.635670] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.636954] Key type encrypted registered [ 0.638645] printk: console [netcon0] enabled [ 0.639186] netconsole: network logging started [ 0.824255] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.876511] ata1: SATA link down (SStatus 0 SControl 300) [ 0.877365] ata4: SATA link down (SStatus 0 SControl 300) [ 0.878219] ata5: SATA link down (SStatus 0 SControl 300) [ 0.879415] ata2: SATA link down (SStatus 0 SControl 300) [ 0.880250] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.881186] ata6: SATA link down (SStatus 0 SControl 300) [ 0.881900] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.882620] ata3.00: applying bridge limits [ 0.883239] ata3.00: configured for UDMA/100 [ 0.884134] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.919480] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.920320] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.949255] IP-Config: Complete: [ 0.949705] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 0.950929] host=192.168.7.4, domain=, nis-domain=(none) [ 0.951627] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.951629] nameserver0=8.8.8.8 [ 0.953515] md: Waiting for all devices to be available before autodetect [ 0.954277] md: If you don't use raid, use raid=noautodetect [ 0.954903] md: Autodetecting RAID arrays. [ 0.955369] md: autorun ... [ 0.955657] md: ... autorun DONE. [ 0.957202] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 0.957974] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.958734] devtmpfs: mounted [ 0.960288] Freeing unused kernel image (initmem) memory: 1936K [ 0.964906] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 0.966037] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 0.968263] Write protecting the kernel read-only data: 22528k [ 0.969875] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.970963] Freeing unused kernel image (rodata/data gap) memory: 364K [ 0.971639] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.027190] udevd[174]: starting version 3.2.11 [ 1.031111] udevd[175]: starting eudev-3.2.11 [ 1.080285] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.212982] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.265652] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.327461] EXT4-fs (vda): re-mounted. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:39] Created VT-bound seat seat0[0m 00:00:00.000 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seatd.c:194] seatd started[0m Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... [ 1.575246] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready 00:00:00.122 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 374, uid: 1000, gid: 1000)[0m 00:00:00.122 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:170] Added client 2 to seat0[0m 00:00:00.122 [1;34m [c/debug/seatd/0.7.0-r0/seatd/seat.c:480] Opened client 2 on seat0[0m could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCFlNUxoN2p5LxDMpe2tSzz7bB4F1deAwHmHpbQD5SbxaQnrTb7uy4m9qbz2hXDsKSHVbmsSEi0w7/VMtN/NhHQM1lWy5RAKYHV18sxOIekV8naKmm9E2/qHCxWTnu2Rv5zSf+MBkP/ApMUqwBcrfj4tPPOAF5CylvgrOSztV5+2WkPlrDygJ8UY2WwJGnKe5UlfK5xiAfV6JSvO79AuJcyO1PPgbFB7u2Zzqje2mpdNuazfolYCB5psMsmAYjA83fdHMpaS0qaf/2ymU6u3SRwIMh3RDpUg1C/+oVhJ4y3ihEEt+ZCq8oqLa8WwyP4zHLU6AzOb2aPn+Wj/ldTrFTD root@qemux86-64 Fingerprint: SHA256:WCs1H36UOyCdiYeIM53N1zrww5A63lUENWAZ3XyTklc dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 1.893088] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.893763] Bluetooth: BNEP filters: protocol multicast [ 1.894328] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:00:28.746 [1;34m [c/debug/seatd/0.7.0-r0/seatd/server.c:145] New client connected (pid: 5997, uid: 0, gid: 0)[0m 00:00:28.748 [1;31m [c/debug/seatd/0.7.0-r0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client[0m 00:00:28.748 [1;31m [c/debug/seatd/0.7.0-r0/seatd/client.c:177] Could not add client to target seat: Device or resource busy[0m