[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 371310797 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2599.996 MHz processor
[    0.000991] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001015] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004976] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.005113] ACPI: Early table checksum verification disabled
[    0.005117] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.005124] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005130] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005135] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005138] ACPI: FACS 0x000000000FFE0000 000040
[    0.005141] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005143] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005146] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005149] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005151] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.005152] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.005153] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.005154] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.005155] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.005155] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.005156] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.005196] Zone ranges:
[    0.005197]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005199]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.005200]   Normal   empty
[    0.005201] Movable zone start for each node
[    0.005202] Early memory node ranges
[    0.005202]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.005204]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.005205] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.005593] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.005609] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006218] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.006481] ACPI: PM-Timer IO Port: 0x608
[    0.006487] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006517] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006520] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006522] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006523] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006525] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006526] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006529] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006530] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006533] TSC deadline timer available
[    0.006534] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.006550] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.006551] Booting paravirtualized kernel on KVM
[    0.006553] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006556] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.007073] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.007101] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.007103] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.007190] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.007211] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.007714] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.008525] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved)
[    0.008564] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.008570] Kernel/User page tables isolation: enabled
[    0.008580] ftrace: allocating 47075 entries in 184 pages
[    0.016806] ftrace: allocated 184 pages with 4 groups
[    0.016864] Dynamic Preempt: full
[    0.017276] rcu: Preemptible hierarchical RCU implementation.
[    0.017277] rcu: 	RCU event tracing is enabled.
[    0.017278] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.017279] 	All grace periods are expedited (rcu_expedited).
[    0.017280] 	Trampoline variant of Tasks RCU enabled.
[    0.017280] 	Rude variant of Tasks RCU enabled.
[    0.017281] 	Tracing variant of Tasks RCU enabled.
[    0.017281] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.017283] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.021610] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.021780] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.021861] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.021871] random: crng init done
[    0.024950] Console: colour VGA+ 80x25
[    0.080251] printk: console [ttyS0] enabled
[    0.080548] ACPI: Core revision 20220331
[    0.080926] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.081646] APIC: Switch to symmetric I/O mode setup
[    0.082094] x2apic enabled
[    0.082427] Switched APIC routing to physical x2apic.
[    0.083380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.083834] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.084563] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.085564] pid_max: default: 32768 minimum: 301
[    0.085897] LSM: Security Framework initializing
[    0.086571] landlock: Up and running.
[    0.086874] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.087372] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.088697] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.089097] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.089498] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.089567] Spectre V2 : Mitigation: Retpolines
[    0.090564] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.091564] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.092029] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.092563] RETBleed: Vulnerable
[    0.092781] Speculative Store Bypass: Vulnerable
[    0.093113] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.093564] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.094091] SRBDS: Unknown: Dependent on hypervisor status
[    0.109790] Freeing SMP alternatives memory: 52K
[    0.110269] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.110562] cblist_init_generic: Setting adjustable number of callback queues.
[    0.110565] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.111039] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.111468] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.111581] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.112238] rcu: Hierarchical SRCU implementation.
[    0.112565] rcu: 	Max phase no-delay instances is 400.
[    0.113169] smp: Bringing up secondary CPUs ...
[    0.113624] x86: Booting SMP configuration:
[    0.113918] .... node  #0, CPUs:      #1 #2 #3
[    0.114842] smp: Brought up 1 node, 4 CPUs
[    0.115157] smpboot: Max logical packages: 1
[    0.115566] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.116236] devtmpfs: initialized
[    0.116695] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.117324] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.117599] pinctrl core: initialized pinctrl subsystem
[    0.118609] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.119456] thermal_sys: Registered thermal governor 'step_wise'
[    0.119458] thermal_sys: Registered thermal governor 'user_space'
[    0.119599] cpuidle: using governor menu
[    0.120508] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.120562] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.121583] PCI: Using configuration type 1 for base access
[    0.123582] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.140564] raid6: avx2x4   gen() 28820 MB/s
[    0.157564] raid6: avx2x2   gen() 28773 MB/s
[    0.174564] raid6: avx2x1   gen() 25746 MB/s
[    0.174890] raid6: using algorithm avx2x4 gen() 28820 MB/s
[    0.191565] raid6: .... xor() 9626 MB/s, rmw enabled
[    0.191990] raid6: using avx2x2 recovery algorithm
[    0.192388] ACPI: Added _OSI(Module Device)
[    0.192566] ACPI: Added _OSI(Processor Device)
[    0.192912] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.193230] ACPI: Added _OSI(Processor Aggregator Device)
[    0.193565] ACPI: Added _OSI(Linux-Dell-Video)
[    0.193897] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.194266] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.195379] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.196593] ACPI: Interpreter enabled
[    0.196877] ACPI: PM: (supports S0 S3 S5)
[    0.197150] ACPI: Using IOAPIC for interrupt routing
[    0.197543] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.197566] PCI: Using E820 reservations for host bridge windows
[    0.198077] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.200011] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.200461] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.200604] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.201091] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.201605] PCI host bridge to bus 0000:00
[    0.201897] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.202368] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.202565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.203096] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.203566] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.204080] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.204565] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.205007] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.205894] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.207242] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.208566] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.212334] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.213546] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.213985] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.215242] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.216566] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.219321] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.220868] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.222572] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.227573] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.229571] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.234571] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.235181] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.235964] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.237570] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.240128] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.246572] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.249871] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.252567] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.253981] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.256434] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.257539] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.260567] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.262028] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.262846] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.265674] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.266558] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.266831] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.271567] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.272567] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.273800] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.276985] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.279201] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.279653] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.280159] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.280629] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.281270] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.281626] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.282321] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.282673] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.283234] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.283581] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.284048] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.284575] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.285017] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.285577] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.285998] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.286576] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.287498] SCSI subsystem initialized
[    0.287621] ACPI: bus type USB registered
[    0.288072] usbcore: registered new interface driver usbfs
[    0.288573] usbcore: registered new interface driver hub
[    0.289155] usbcore: registered new device driver usb
[    0.289519] pps_core: LinuxPPS API ver. 1 registered
[    0.289566] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.290326] PTP clock support registered
[    0.290733] Bluetooth: Core ver 2.22
[    0.291142] NET: Registered PF_BLUETOOTH protocol family
[    0.291567] Bluetooth: HCI device and connection manager initialized
[    0.292158] Bluetooth: HCI socket layer initialized
[    0.292540] Bluetooth: L2CAP socket layer initialized
[    0.292572] Bluetooth: SCO socket layer initialized
[    0.293000] PCI: Using ACPI for IRQ routing
[    0.332287] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.332337] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.332562] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.332572] vgaarb: loaded
[    0.332944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.333559] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.337623] clocksource: Switched to clocksource kvm-clock
[    0.338180] pnp: PnP ACPI init
[    0.338561] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.339215] pnp: PnP ACPI: found 6 devices
[    0.346059] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.346874] NET: Registered PF_INET protocol family
[    0.347471] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.348687] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.349479] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.350076] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.350718] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.351381] TCP: Hash tables configured (established 2048 bind 2048)
[    0.351829] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.352485] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.353128] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.353851] RPC: Registered named UNIX socket transport module.
[    0.354431] RPC: Registered udp transport module.
[    0.354758] RPC: Registered tcp transport module.
[    0.355246] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.355693] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.357081] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.357517] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.358184] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.358654] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.359298] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.360209] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.361344] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.362412] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.363492] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.364608] PCI: CLS 0 bytes, default 64
[    0.365157] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.365919] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.367599] Initialise system trusted keyrings
[    0.368085] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.370685] NFS: Registering the id_resolver key type
[    0.371069] Key type id_resolver registered
[    0.371443] Key type id_legacy registered
[    0.372114] Key type cifs.idmap registered
[    0.382010] xor: automatically using best checksumming function   avx       
[    0.382541] Key type asymmetric registered
[    0.382926] Asymmetric key parser 'x509' registered
[    0.383342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.388899] io scheduler mq-deadline registered
[    0.389207] io scheduler kyber registered
[    0.389887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.393624] ACPI: button: Power Button [PWRF]
[    0.394932] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.396338] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.397496] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.398622] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.409909] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.410470] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.411190] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.411873] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.417080] Linux agpgart interface v0.103
[    0.417478] ACPI: bus type drm_connector registered
[    0.418669] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.419056] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.425263] Console: switching to colour dummy device 80x25
[    0.425802] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.425804] [drm] features: -context_init
[    0.426999] [drm] number of scanouts: 1
[    0.427284] [drm] number of cap sets: 0
[    0.427914] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.431145] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.443803] Console: switching to colour frame buffer device 160x50
[    0.462327] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.465014] brd: module loaded
[    0.466471] loop: module loaded
[    0.466809] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.468059] virtio_blk virtio3: [vda] 67330 512-byte logical blocks (34.5 MB/32.9 MiB)
[    0.489865] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.490788] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.492949] scsi host0: ahci
[    0.493615] scsi host1: ahci
[    0.494274] scsi host2: ahci
[    0.494889] scsi host3: ahci
[    0.495462] scsi host4: ahci
[    0.496189] scsi host5: ahci
[    0.496683] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.497639] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.498575] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.499524] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.500380] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.501266] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.513720] e100: Intel(R) PRO/100 Network Driver
[    0.514143] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.514549] e1000: Intel(R) PRO/1000 Network Driver
[    0.514896] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.515300] e1000e: Intel(R) PRO/1000 Network Driver
[    0.515647] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.516062] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.516432] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.516830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.517284] ehci-pci: EHCI PCI platform driver
[    0.518217] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.518615] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.519237] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.526628] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.527260] hub 1-0:1.0: USB hub found
[    0.527551] hub 1-0:1.0: 6 ports detected
[    0.528006] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.528463] ohci-pci: OHCI PCI platform driver
[    0.528787] uhci_hcd: USB Universal Host Controller Interface driver
[    0.529814] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.530191] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.530771] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.531377] hub 2-0:1.0: USB hub found
[    0.531669] hub 2-0:1.0: 2 ports detected
[    0.532531] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.532911] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.533506] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.534124] hub 3-0:1.0: USB hub found
[    0.534426] hub 3-0:1.0: 2 ports detected
[    0.535353] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.535731] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.536333] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.536936] hub 4-0:1.0: USB hub found
[    0.537235] hub 4-0:1.0: 2 ports detected
[    0.537647] usbcore: registered new interface driver usb-storage
[    0.538132] usbcore: registered new interface driver usbserial_generic
[    0.538779] usbserial: USB Serial support registered for generic
[    0.539237] usbcore: registered new interface driver ftdi_sio
[    0.539699] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.540225] usbcore: registered new interface driver pl2303
[    0.540616] usbserial: USB Serial support registered for pl2303
[    0.541037] i8042: PNP: No PS/2 controller found.
[    0.541463] mousedev: PS/2 mouse device common for all mice
[    0.542044] rtc_cmos 00:04: RTC can wake from S4
[    0.542666] rtc_cmos 00:04: registered as rtc0
[    0.543028] rtc_cmos 00:04: setting system clock to 2023-01-06T00:37:57 UTC (1672965477)
[    0.543603] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.544360] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.544850] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.545277] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.546089] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.546921] intel_pstate: CPU model not supported
[    0.547271] sdhci: Secure Digital Host Controller Interface driver
[    0.547704] sdhci: Copyright(c) Pierre Ossman
[    0.548081] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.548555] usbcore: registered new interface driver usbhid
[    0.549027] usbhid: USB HID core driver
[    0.549332] u32 classifier
[    0.549523]     input device check on
[    0.549798]     Actions configured
[    0.550194] NET: Registered PF_INET6 protocol family
[    0.550892] Segment Routing with IPv6
[    0.551315] In-situ OAM (IOAM) with IPv6
[    0.551768] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.552558] NET: Registered PF_PACKET protocol family
[    0.553144] Bridge firewalling registered
[    0.553582] Key type dns_resolver registered
[    0.554079] NET: Registered PF_VSOCK protocol family
[    0.554940] IPI shorthand broadcast: enabled
[    0.555275] sched_clock: Marking stable (494128199, 60775211)->(696524371, -141620961)
[    0.556000] Loading compiled-in X.509 certificates
[    0.556490] Key type ._fscrypt registered
[    0.556790] Key type .fscrypt registered
[    0.557071] Key type fscrypt-provisioning registered
[    0.558150] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.559413] Key type encrypted registered
[    0.561474] printk: console [netcon0] enabled
[    0.561973] netconsole: network logging started
[    0.763604] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.807401] ata1: SATA link down (SStatus 0 SControl 300)
[    0.823653] ata6: SATA link down (SStatus 0 SControl 300)
[    0.824291] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.824827] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.825267] ata3.00: applying bridge limits
[    0.825642] ata3.00: configured for UDMA/100
[    0.826114] ata4: SATA link down (SStatus 0 SControl 300)
[    0.826643] ata5: SATA link down (SStatus 0 SControl 300)
[    0.827443] ata2: SATA link down (SStatus 0 SControl 300)
[    0.836320] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.870927] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.871778] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.901616] IP-Config: Complete:
[    0.901645] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    0.901887]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    0.902728] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    0.903410]      host=192.168.7.2, domain=, nis-domain=(none)
[    0.904594]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.904596]      nameserver0=8.8.8.8
[    0.905659] md: Waiting for all devices to be available before autodetect
[    0.905968] md: If you don't use raid, use raid=noautodetect
[    0.906214] md: Autodetecting RAID arrays.
[    0.906427] md: autorun ...
[    0.906554] md: ... autorun DONE.
[    0.907906] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    0.908340] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.908732] devtmpfs: mounted
[    0.909946] Freeing unused kernel image (initmem) memory: 1936K
[    0.914606] Write protecting the kernel read-only data: 22528k
[    0.915579] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.916044] Freeing unused kernel image (rodata/data gap) memory: 364K
[    0.916420] Run /sbin/init as init process
INIT: version 3.04 booting
Starting udev
[    0.960755] udevd[161]: starting version 3.2.11
[    0.964243] udevd[162]: starting eudev-3.2.11
[    1.018613] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.157891] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.209780] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.270981] EXT4-fs (vda): re-mounted. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: [    1.521624] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
