[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Dec 5 22:02:13 UTC 2022 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000000ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 389358785 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2299.996 MHz processor [ 0.000975] last_pfn = 0xffd8 max_arch_pfn = 0x400000000 [ 0.000999] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005198] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.005367] ACPI: Early table checksum verification disabled [ 0.005369] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.005376] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005380] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005385] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005388] ACPI: FACS 0x000000000FFE0000 000040 [ 0.005390] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005393] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005395] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005398] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005400] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df] [ 0.005401] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb] [ 0.005402] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f] [ 0.005403] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f] [ 0.005404] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7] [ 0.005404] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3] [ 0.005405] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b] [ 0.005437] Zone ranges: [ 0.005438] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005440] DMA32 [mem 0x0000000001000000-0x000000000ffd7fff] [ 0.005441] Normal empty [ 0.005442] Movable zone start for each node [ 0.005443] Early memory node ranges [ 0.005443] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005444] node 0: [mem 0x0000000000100000-0x000000000ffd7fff] [ 0.005445] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff] [ 0.005825] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005840] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.006469] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.006763] ACPI: PM-Timer IO Port: 0x608 [ 0.006772] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.006793] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.006797] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.006798] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.006800] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.006801] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.006802] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.006806] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.006807] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.006809] TSC deadline timer available [ 0.006810] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.006825] [mem 0x10000000-0xafffffff] available for PCI devices [ 0.006826] Booting paravirtualized kernel on KVM [ 0.006828] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.006832] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.007376] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.007403] Built 1 zonelists, mobility grouping on. Total pages: 64215 [ 0.007405] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.007496] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.007517] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.008049] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.008831] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved) [ 0.008868] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.008874] Kernel/User page tables isolation: enabled [ 0.008883] ftrace: allocating 47075 entries in 184 pages [ 0.017221] ftrace: allocated 184 pages with 4 groups [ 0.017251] Dynamic Preempt: full [ 0.017672] rcu: Preemptible hierarchical RCU implementation. [ 0.017672] rcu: RCU event tracing is enabled. [ 0.017673] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.017674] All grace periods are expedited (rcu_expedited). [ 0.017675] Trampoline variant of Tasks RCU enabled. [ 0.017676] Rude variant of Tasks RCU enabled. [ 0.017676] Tracing variant of Tasks RCU enabled. [ 0.017677] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.017678] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.022339] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.022509] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.022589] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.022598] random: crng init done [ 0.026272] Console: colour VGA+ 80x25 [ 0.085228] printk: console [ttyS0] enabled [ 0.085517] ACPI: Core revision 20220331 [ 0.085911] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.086609] APIC: Switch to symmetric I/O mode setup [ 0.087175] x2apic enabled [ 0.087504] Switched APIC routing to physical x2apic. [ 0.088451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088914] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.089684] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996) [ 0.090293] pid_max: default: 32768 minimum: 301 [ 0.090694] LSM: Security Framework initializing [ 0.091143] landlock: Up and running. [ 0.091433] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.091687] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.092888] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.093314] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.093688] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.094688] Spectre V2 : Mitigation: Retpolines [ 0.095089] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.095685] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.096187] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible! [ 0.096685] RETBleed: Vulnerable [ 0.096917] Speculative Store Bypass: Vulnerable [ 0.097686] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.098185] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.098687] SRBDS: Unknown: Dependent on hypervisor status [ 0.114881] Freeing SMP alternatives memory: 52K [ 0.115323] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.115684] cblist_init_generic: Setting adjustable number of callback queues. [ 0.115686] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.116237] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.116686] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.117168] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only. [ 0.117719] rcu: Hierarchical SRCU implementation. [ 0.118100] rcu: Max phase no-delay instances is 400. [ 0.118728] smp: Bringing up secondary CPUs ... [ 0.119191] x86: Booting SMP configuration: [ 0.119506] .... node #0, CPUs: #1 #2 #3 [ 0.119997] smp: Brought up 1 node, 4 CPUs [ 0.121021] smpboot: Max logical packages: 1 [ 0.121374] smpboot: Total of 4 processors activated (18399.96 BogoMIPS) [ 0.121928] devtmpfs: initialized [ 0.122113] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.122691] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.123250] pinctrl core: initialized pinctrl subsystem [ 0.124361] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.124820] thermal_sys: Registered thermal governor 'step_wise' [ 0.124822] thermal_sys: Registered thermal governor 'user_space' [ 0.125731] cpuidle: using governor menu [ 0.126191] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.126690] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.127237] PCI: Using configuration type 1 for base access [ 0.129722] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.149715] raid6: avx2x4 gen() 26726 MB/s [ 0.167684] raid6: avx2x2 gen() 27263 MB/s [ 0.184175] raid6: avx2x1 gen() 23884 MB/s [ 0.184559] raid6: using algorithm avx2x2 gen() 27263 MB/s [ 0.200998] raid6: .... xor() 15599 MB/s, rmw enabled [ 0.201475] raid6: using avx2x2 recovery algorithm [ 0.201731] ACPI: Added _OSI(Module Device) [ 0.202095] ACPI: Added _OSI(Processor Device) [ 0.202469] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.202687] ACPI: Added _OSI(Processor Aggregator Device) [ 0.203175] ACPI: Added _OSI(Linux-Dell-Video) [ 0.203503] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.204687] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.206075] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.207840] ACPI: Interpreter enabled [ 0.208231] ACPI: PM: (supports S0 S3 S5) [ 0.208556] ACPI: Using IOAPIC for interrupt routing [ 0.208711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.209413] PCI: Using E820 reservations for host bridge windows [ 0.209769] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.212392] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.212691] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.213446] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.213750] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.214389] PCI host bridge to bus 0000:00 [ 0.214689] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.215278] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.215687] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.216278] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window] [ 0.216687] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.217334] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.217687] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.218189] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.219083] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.220528] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.221687] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.225687] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.227217] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.228158] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.229259] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.230614] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.234687] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.236545] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.238689] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.242292] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.243690] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.248688] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.249363] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.250152] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.252689] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.254689] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.262690] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.265941] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.268279] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.269638] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.271628] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.272609] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.274402] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.275549] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.276116] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.278670] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.278962] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.279878] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.283349] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.284327] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.285501] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.287687] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.289759] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.290381] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.290748] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.291236] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.291751] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.292352] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.292744] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.293246] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.293712] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.294155] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.294688] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.295128] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.295625] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.295694] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.296244] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.296695] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.297599] SCSI subsystem initialized [ 0.297720] ACPI: bus type USB registered [ 0.298101] usbcore: registered new interface driver usbfs [ 0.298502] usbcore: registered new interface driver hub [ 0.298696] usbcore: registered new device driver usb [ 0.299128] pps_core: LinuxPPS API ver. 1 registered [ 0.299507] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.299689] PTP clock support registered [ 0.300018] Bluetooth: Core ver 2.22 [ 0.300204] NET: Registered PF_BLUETOOTH protocol family [ 0.300688] Bluetooth: HCI device and connection manager initialized [ 0.301228] Bluetooth: HCI socket layer initialized [ 0.301602] Bluetooth: L2CAP socket layer initialized [ 0.301690] Bluetooth: SCO socket layer initialized [ 0.302119] PCI: Using ACPI for IRQ routing [ 0.340216] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.340229] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.340684] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.340688] vgaarb: loaded [ 0.340929] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.341305] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.347758] clocksource: Switched to clocksource kvm-clock [ 0.348369] pnp: PnP ACPI init [ 0.348778] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.349559] pnp: PnP ACPI: found 6 devices [ 0.356475] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.357150] NET: Registered PF_INET protocol family [ 0.357554] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.358361] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.359106] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.359671] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.360224] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.360779] TCP: Hash tables configured (established 2048 bind 2048) [ 0.361262] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.361721] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.362261] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.362939] RPC: Registered named UNIX socket transport module. [ 0.363420] RPC: Registered udp transport module. [ 0.363772] RPC: Registered tcp transport module. [ 0.364165] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.364597] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.365014] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.365422] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.365901] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window] [ 0.366423] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.367051] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.367857] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.368978] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.369989] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.371556] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.372547] PCI: CLS 0 bytes, default 64 [ 0.373122] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.373835] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.375292] Initialise system trusted keyrings [ 0.375769] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.377768] NFS: Registering the id_resolver key type [ 0.378205] Key type id_resolver registered [ 0.378499] Key type id_legacy registered [ 0.379091] Key type cifs.idmap registered [ 0.390060] xor: automatically using best checksumming function avx [ 0.390608] Key type asymmetric registered [ 0.390932] Asymmetric key parser 'x509' registered [ 0.391307] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.391868] io scheduler mq-deadline registered [ 0.392197] io scheduler kyber registered [ 0.392848] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.396725] ACPI: button: Power Button [PWRF] [ 0.397619] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.399087] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.400408] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.402403] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.415847] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.416488] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.417336] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.418134] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.421836] Linux agpgart interface v0.103 [ 0.422290] ACPI: bus type drm_connector registered [ 0.422823] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.423308] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.429573] Console: switching to colour dummy device 80x25 [ 0.430221] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.430223] [drm] features: -context_init [ 0.437225] [drm] number of scanouts: 1 [ 0.437547] [drm] number of cap sets: 0 [ 0.438223] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.441781] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.443539] Console: switching to colour frame buffer device 160x50 [ 0.468338] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.471161] brd: module loaded [ 0.472714] loop: module loaded [ 0.473091] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.474536] virtio_blk virtio3: [vda] 263162 512-byte logical blocks (135 MB/128 MiB) [ 0.477026] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.477721] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.479454] scsi host0: ahci [ 0.479988] scsi host1: ahci [ 0.480484] scsi host2: ahci [ 0.480953] scsi host3: ahci [ 0.481412] scsi host4: ahci [ 0.481892] scsi host5: ahci [ 0.482210] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.482810] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.483372] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.483898] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.484421] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.484963] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.502923] e100: Intel(R) PRO/100 Network Driver [ 0.503367] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.503794] e1000: Intel(R) PRO/1000 Network Driver [ 0.504243] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.504658] e1000e: Intel(R) PRO/1000 Network Driver [ 0.505017] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.505439] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.505836] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.506253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.506853] ehci-pci: EHCI PCI platform driver [ 0.507825] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.508221] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.508880] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.515746] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.516383] hub 1-0:1.0: USB hub found [ 0.516733] hub 1-0:1.0: 6 ports detected [ 0.517206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.517680] ohci-pci: OHCI PCI platform driver [ 0.518070] uhci_hcd: USB Universal Host Controller Interface driver [ 0.519147] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.519557] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.520208] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.520787] hub 2-0:1.0: USB hub found [ 0.521115] hub 2-0:1.0: 2 ports detected [ 0.522117] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.522530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.523252] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.523970] hub 3-0:1.0: USB hub found [ 0.524289] hub 3-0:1.0: 2 ports detected [ 0.525296] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.525719] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.526398] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.527348] hub 4-0:1.0: USB hub found [ 0.527667] hub 4-0:1.0: 2 ports detected [ 0.528141] usbcore: registered new interface driver usb-storage [ 0.528649] usbcore: registered new interface driver usbserial_generic [ 0.529213] usbserial: USB Serial support registered for generic [ 0.529668] usbcore: registered new interface driver ftdi_sio [ 0.530119] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.530675] usbcore: registered new interface driver pl2303 [ 0.531217] usbserial: USB Serial support registered for pl2303 [ 0.531673] i8042: PNP: No PS/2 controller found. [ 0.532154] mousedev: PS/2 mouse device common for all mice [ 0.532842] rtc_cmos 00:04: RTC can wake from S4 [ 0.533572] rtc_cmos 00:04: registered as rtc0 [ 0.533991] rtc_cmos 00:04: setting system clock to 2023-01-07T18:49:59 UTC (1673117399) [ 0.534640] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.535496] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.536003] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.536438] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.537326] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.538219] intel_pstate: CPU model not supported [ 0.538638] sdhci: Secure Digital Host Controller Interface driver [ 0.539175] sdhci: Copyright(c) Pierre Ossman [ 0.539546] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.540095] usbcore: registered new interface driver usbhid [ 0.540527] usbhid: USB HID core driver [ 0.540878] u32 classifier [ 0.541096] input device check on [ 0.541354] Actions configured [ 0.541755] NET: Registered PF_INET6 protocol family [ 0.542532] Segment Routing with IPv6 [ 0.542940] In-situ OAM (IOAM) with IPv6 [ 0.543310] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.543869] NET: Registered PF_PACKET protocol family [ 0.544296] Bridge firewalling registered [ 0.544631] Key type dns_resolver registered [ 0.545043] NET: Registered PF_VSOCK protocol family [ 0.545792] IPI shorthand broadcast: enabled [ 0.546164] sched_clock: Marking stable (481593413, 64168919)->(725701969, -179939637) [ 0.546913] Loading compiled-in X.509 certificates [ 0.547484] Key type ._fscrypt registered [ 0.547847] Key type .fscrypt registered [ 0.548144] Key type fscrypt-provisioning registered [ 0.549153] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.550292] Key type encrypted registered [ 0.552286] printk: console [netcon0] enabled [ 0.552656] netconsole: network logging started [ 0.759727] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.812326] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.812986] ata1: SATA link down (SStatus 0 SControl 300) [ 0.813512] ata6: SATA link down (SStatus 0 SControl 300) [ 0.814052] ata5: SATA link down (SStatus 0 SControl 300) [ 0.814598] ata2: SATA link down (SStatus 0 SControl 300) [ 0.815131] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.815597] ata3.00: applying bridge limits [ 0.816044] ata4: SATA link down (SStatus 0 SControl 300) [ 0.816544] ata3.00: configured for UDMA/100 [ 0.817193] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.852053] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.852625] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.886732] IP-Config: Complete: [ 0.887070] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 0.887824] host=192.168.7.2, domain=, nis-domain=(none) [ 0.888258] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.888260] nameserver0=8.8.8.8 [ 0.889411] md: Waiting for all devices to be available before autodetect [ 0.889869] md: If you don't use raid, use raid=noautodetect [ 0.890176] md: Autodetecting RAID arrays. [ 0.890379] md: autorun ... [ 0.890512] md: ... autorun DONE. [ 0.891679] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 0.892258] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.892907] devtmpfs: mounted [ 0.894311] Freeing unused kernel image (initmem) memory: 1936K [ 0.896358] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 0.897104] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 0.901738] Write protecting the kernel read-only data: 22528k [ 0.902810] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.903337] Freeing unused kernel image (rodata/data gap) memory: 364K [ 0.903755] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 0.961896] udevd[168]: starting version 3.2.11 [ 0.966332] udevd[169]: starting eudev-3.2.11 [ 1.012699] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.146320] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.198934] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.262040] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 1.525742] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting rpcbind daemon...done. starting statd: done Starting atd: OK [ 4.095745] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). starting 8 nfsd kernel threads: [ 5.142033] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 5.143181] NFSD: Using legacy client tracking operations. [ 5.143715] NFSD: starting 90-second grace period (net f0000000) done starting mountd: done Starting system log daemon...0 Starting crond: OK Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0 qemux86-64 login: