[    2.364758] io scheduler mq-deadline registered
[    2.364995] io scheduler kyber registered
[    2.371604] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.372607] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.373482] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.375152] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.377353] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.377789] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.378033] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.378235] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.379932] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    2.384208] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    2.384975] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    2.385222] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.385466] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.386583] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    2.386809] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    2.388223] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    2.388459] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.388660] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.391023] PCI: bus0: Fast back to back transfers disabled
[    2.392779] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    2.393277] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    2.393598] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    2.393859] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    2.394057] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    2.394689] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    2.396182] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.414554] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.417947] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.452728] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.453631] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.453673] [drm] features: -context_init
[    2.455900] [drm] number of scanouts: 1
[    2.456239] printk: console [hvc0] enabled
[    2.460129] [drm] number of cap sets: 0
[    2.472662] [drm] Initialized virtio_gpu 0.1.0 0 for virtio4 on minor 0
[    2.533894] virtio_gpu virtio4: [drm] drm_plane_enable_fb_damage_clips() not called
[    2.564500] Console: switching to colour frame buffer device 160x50
[    2.589412] virtio_gpu virtio4: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.631952] brd: module loaded
[    2.632928] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.638854] virtio_blk virtio1: [vda] 5336900 512-byte logical blocks (2.73 GB/2.54 GiB)
[    2.664701] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.665746] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.670375] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.675153] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.675440] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.675821] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.685476] hub 1-0:1.0: USB hub found
[    2.686497] hub 1-0:1.0: 4 ports detected
[    2.692007] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.694628] hub 2-0:1.0: USB hub found
[    2.695119] hub 2-0:1.0: 4 ports detected
[    2.703398] rtc-pl031 9010000.pl031: registered as rtc0
[    2.704812] rtc-pl031 9010000.pl031: setting system clock to 2023-01-07T17:27:57 UTC (1673112477)
[    2.708864] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.712968] usbcore: registered new interface driver usbhid
[    2.713245] usbhid: USB HID core driver
[    2.714052] u32 classifier
[    2.716173]     input device check on
[    2.716410]     Actions configured
[    2.718958] NET: Registered PF_INET6 protocol family
[    2.728382] Segment Routing with IPv6
[    2.728831] In-situ OAM (IOAM) with IPv6
[    2.729870] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.733517] NET: Registered PF_PACKET protocol family
[    2.734975] Bridge firewalling registered
[    2.736355] Key type dns_resolver registered
[    2.737374] NET: Registered PF_VSOCK protocol family
[    2.738707] Registering SWP/SWPB emulation handler
[    2.769581] Key type ._fscrypt registered
[    2.769926] Key type .fscrypt registered
[    2.770120] Key type fscrypt-provisioning registered
[    2.777140] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.780618] Key type encrypted registered
[    2.812544] printk: console [netcon0] enabled
[    2.812935] netconsole: network logging started
[    2.874889] IP-Config: Complete:
[    2.875314]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    2.875969]      host=192.168.7.6, domain=, nis-domain=(none)
[    2.876229]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.876290]      nameserver0=8.8.8.8
[    2.884783] md: Waiting for all devices to be available before autodetect
[    2.885130] md: If you don't use raid, use raid=noautodetect
[    2.885407] md: Autodetecting RAID arrays.
[    2.885631] md: autorun ...
[    2.885803] md: ... autorun DONE.
[    2.927593] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    2.929811] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.933468] devtmpfs: mounted
[    3.033771] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.170733] Freeing unused kernel image (initmem) memory: 2048K
[    3.347980] Run /sbin/init as init process
[    3.401741] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.404611] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
INIT: version 3.04 booting
[    3.574485] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.773364] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.845614] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.840771] udevd[178]: starting version 3.2.11
[    4.935122] udevd[179]: starting eudev-3.2.11
[    6.544706] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    6.872842] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 5.19.17-yocto-standard #1 SMP PREEMPT Mon Dec 5 22:02:22 UTC 2022 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan  7 17:28:06 2023
done.
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-grsEmBnbl6,guid=abe80209b48933a68b327c0663b9aba8
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput
Starting tcf-agent: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.1 qemuarm hvc0

qemuarm login: matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[692]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=698 comm="matchbox-panel --start-applets showdesktop,windows")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[692]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
[ 1398.229413] hellomod: loading out-of-tree module taints kernel.
[ 1398.239638] Hello world!
[ 1402.026366] Cleaning up hellomod.
