[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000001ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 394596292 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000004] tsc: Detected 2599.996 MHz processor
[    0.000864] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000885] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004291] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.004375] ACPI: Early table checksum verification disabled
[    0.004376] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.004382] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004386] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004390] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004393] ACPI: FACS 0x000000001FFE0000 000040
[    0.004395] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004397] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004400] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004402] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004404] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df]
[    0.004405] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb]
[    0.004405] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.004406] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f]
[    0.004407] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7]
[    0.004407] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3]
[    0.004408] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b]
[    0.004436] Zone ranges:
[    0.004437]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004439]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.004440]   Normal   empty
[    0.004441] Movable zone start for each node
[    0.004441] Early memory node ranges
[    0.004441]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.004442]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.004443] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.004817] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004831] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006364] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.006586] ACPI: PM-Timer IO Port: 0x608
[    0.006592] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006609] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006611] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006612] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006613] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006614] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006615] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006617] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006618] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006620] TSC deadline timer available
[    0.006621] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.006633] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.006633] Booting paravirtualized kernel on KVM
[    0.006634] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006637] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.007125] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.007148] Built 1 zonelists, mobility grouping on.  Total pages: 128727
[    0.007149] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.007256] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.007294] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.007789] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.008851] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved)
[    0.008883] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.008888] Kernel/User page tables isolation: enabled
[    0.008896] ftrace: allocating 47075 entries in 184 pages
[    0.015752] ftrace: allocated 184 pages with 4 groups
[    0.015776] Dynamic Preempt: full
[    0.016167] rcu: Preemptible hierarchical RCU implementation.
[    0.016167] rcu: 	RCU event tracing is enabled.
[    0.016168] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.016169] 	All grace periods are expedited (rcu_expedited).
[    0.016169] 	Trampoline variant of Tasks RCU enabled.
[    0.016170] 	Rude variant of Tasks RCU enabled.
[    0.016171] 	Tracing variant of Tasks RCU enabled.
[    0.016171] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.016172] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.019911] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.020062] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.020124] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.020131] random: crng init done
[    0.022729] Console: colour VGA+ 80x25
[    0.067729] printk: console [ttyS0] enabled
[    0.067970] ACPI: Core revision 20220331
[    0.068961] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.069539] APIC: Switch to symmetric I/O mode setup
[    0.069940] x2apic enabled
[    0.070223] Switched APIC routing to physical x2apic.
[    0.071030] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.075362] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.075971] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.076458] pid_max: default: 32768 minimum: 301
[    0.076984] LSM: Security Framework initializing
[    0.077255] landlock: Up and running.
[    0.077972] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.078389] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.079140] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.079479] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.079812] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.079974] Spectre V2 : Mitigation: Retpolines
[    0.080250] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.080972] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.081368] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.081971] RETBleed: Vulnerable
[    0.082153] Speculative Store Bypass: Vulnerable
[    0.082425] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.082971] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.083398] SRBDS: Unknown: Dependent on hypervisor status
[    0.096565] Freeing SMP alternatives memory: 52K
[    0.096896] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.096970] cblist_init_generic: Setting adjustable number of callback queues.
[    0.096972] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.097359] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.097987] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.098336] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.098869] rcu: Hierarchical SRCU implementation.
[    0.098972] rcu: 	Max phase no-delay instances is 400.
[    0.099441] smp: Bringing up secondary CPUs ...
[    0.099778] x86: Booting SMP configuration:
[    0.099975] .... node  #0, CPUs:      #1 #2 #3
[    0.100339] smp: Brought up 1 node, 4 CPUs
[    0.101213] smpboot: Max logical packages: 1
[    0.101475] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.102032] devtmpfs: initialized
[    0.102302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.102977] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.103419] pinctrl core: initialized pinctrl subsystem
[    0.104125] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.104562] thermal_sys: Registered thermal governor 'step_wise'
[    0.104563] thermal_sys: Registered thermal governor 'user_space'
[    0.104978] cpuidle: using governor menu
[    0.105631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.105975] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.106372] PCI: Using configuration type 1 for base access
[    0.107783] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.124972] raid6: avx2x4   gen() 32682 MB/s
[    0.141972] raid6: avx2x2   gen() 32501 MB/s
[    0.158973] raid6: avx2x1   gen() 28820 MB/s
[    0.159255] raid6: using algorithm avx2x4 gen() 32682 MB/s
[    0.175971] raid6: .... xor() 10634 MB/s, rmw enabled
[    0.176274] raid6: using avx2x2 recovery algorithm
[    0.176576] ACPI: Added _OSI(Module Device)
[    0.176852] ACPI: Added _OSI(Processor Device)
[    0.176973] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.177244] ACPI: Added _OSI(Processor Aggregator Device)
[    0.177551] ACPI: Added _OSI(Linux-Dell-Video)
[    0.177834] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.177973] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.179020] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.180108] ACPI: Interpreter enabled
[    0.180351] ACPI: PM: (supports S0 S3 S5)
[    0.180613] ACPI: Using IOAPIC for interrupt routing
[    0.180918] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.180973] PCI: Using E820 reservations for host bridge windows
[    0.181414] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.183003] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.183407] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.183948] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.184019] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.184453] PCI host bridge to bus 0000:00
[    0.184699] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.184973] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.185361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.185815] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.185973] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.186394] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.186850] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.187003] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.187639] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.188973] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.189973] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.193628] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.194973] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.195699] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.196767] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.197746] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.199973] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.201284] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.203975] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.205845] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.206976] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.210976] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.211847] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.212371] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.213975] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.216613] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.221850] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.225192] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.226877] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.227570] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.229101] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.230049] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.233270] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.234238] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.234922] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.236381] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.236963] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.237098] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.239875] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.240856] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.242108] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.243783] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.244741] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.245025] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.245449] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.245866] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.246022] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.246460] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.246868] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.247018] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.247393] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.247788] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.247979] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.248327] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.248712] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.248979] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.249327] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.249730] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.250540] SCSI subsystem initialized
[    0.250783] ACPI: bus type USB registered
[    0.250986] usbcore: registered new interface driver usbfs
[    0.251372] usbcore: registered new interface driver hub
[    0.251683] usbcore: registered new device driver usb
[    0.251982] pps_core: LinuxPPS API ver. 1 registered
[    0.252318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.252839] PTP clock support registered
[    0.253112] Bluetooth: Core ver 2.22
[    0.253350] NET: Registered PF_BLUETOOTH protocol family
[    0.253667] Bluetooth: HCI device and connection manager initialized
[    0.253975] Bluetooth: HCI socket layer initialized
[    0.254306] Bluetooth: L2CAP socket layer initialized
[    0.254596] Bluetooth: SCO socket layer initialized
[    0.254973] PCI: Using ACPI for IRQ routing
[    0.281807] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.281807] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.281807] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.281974] vgaarb: loaded
[    0.282154] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.282459] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.287061] clocksource: Switched to clocksource kvm-clock
[    0.287487] pnp: PnP ACPI init
[    0.287863] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.288344] pnp: PnP ACPI: found 6 devices
[    0.295574] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.296145] NET: Registered PF_INET protocol family
[    0.296449] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.297125] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.297822] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.298349] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.298827] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.299300] TCP: Hash tables configured (established 4096 bind 4096)
[    0.299679] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.300086] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.300520] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.301095] RPC: Registered named UNIX socket transport module.
[    0.302236] RPC: Registered udp transport module.
[    0.302506] RPC: Registered tcp transport module.
[    0.302777] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.303167] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.303514] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.303861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.304258] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.304645] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.305093] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.305699] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.306504] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.307255] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.308038] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.309755] PCI: CLS 0 bytes, default 64
[    0.310232] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.310770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.311999] Initialise system trusted keyrings
[    0.312394] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.313932] NFS: Registering the id_resolver key type
[    0.314281] Key type id_resolver registered
[    0.314539] Key type id_legacy registered
[    0.315194] Key type cifs.idmap registered
[    0.323524] xor: automatically using best checksumming function   avx       
[    0.323947] Key type asymmetric registered
[    0.324187] Asymmetric key parser 'x509' registered
[    0.324476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.324901] io scheduler mq-deadline registered
[    0.325168] io scheduler kyber registered
[    0.325761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.327069] ACPI: button: Power Button [PWRF]
[    0.328039] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.329435] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.330700] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.332857] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.336348] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.336905] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.337712] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.338464] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.343362] Linux agpgart interface v0.103
[    0.343778] ACPI: bus type drm_connector registered
[    0.344222] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.344619] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.350291] Console: switching to colour dummy device 80x25
[    0.350820] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.350822] [drm] features: -context_init
[    0.352119] [drm] number of scanouts: 1
[    0.352440] [drm] number of cap sets: 0
[    0.353040] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.356490] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.374340] Console: switching to colour frame buffer device 160x50
[    0.379998] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.385984] brd: module loaded
[    0.387435] loop: module loaded
[    0.387739] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.389090] virtio_blk virtio3: [vda] 1086378 512-byte logical blocks (556 MB/530 MiB)
[    0.400140] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.400817] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.402455] scsi host0: ahci
[    0.402951] scsi host1: ahci
[    0.403438] scsi host2: ahci
[    0.403899] scsi host3: ahci
[    0.404390] scsi host4: ahci
[    0.404906] scsi host5: ahci
[    0.405204] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.405800] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.406395] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.406997] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.407588] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.408170] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.412092] e100: Intel(R) PRO/100 Network Driver
[    0.412680] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.413300] e1000: Intel(R) PRO/1000 Network Driver
[    0.413828] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.414482] e1000e: Intel(R) PRO/1000 Network Driver
[    0.415058] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.415719] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.416315] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.416940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.417653] ehci-pci: EHCI PCI platform driver
[    0.418833] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.419438] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.420367] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.428042] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.428745] hub 1-0:1.0: USB hub found
[    0.429084] hub 1-0:1.0: 6 ports detected
[    0.429567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.430086] ohci-pci: OHCI PCI platform driver
[    0.430456] uhci_hcd: USB Universal Host Controller Interface driver
[    0.431460] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.431893] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.432567] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.433219] hub 2-0:1.0: USB hub found
[    0.433544] hub 2-0:1.0: 2 ports detected
[    0.434503] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.434937] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.435620] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.436295] hub 3-0:1.0: USB hub found
[    0.436615] hub 3-0:1.0: 2 ports detected
[    0.437590] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.438037] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.438716] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.439467] hub 4-0:1.0: USB hub found
[    0.439785] hub 4-0:1.0: 2 ports detected
[    0.440633] usbcore: registered new interface driver usb-storage
[    0.441155] usbcore: registered new interface driver usbserial_generic
[    0.441690] usbserial: USB Serial support registered for generic
[    0.442171] usbcore: registered new interface driver ftdi_sio
[    0.442790] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.443473] usbcore: registered new interface driver pl2303
[    0.443928] usbserial: USB Serial support registered for pl2303
[    0.444409] i8042: PNP: No PS/2 controller found.
[    0.444845] mousedev: PS/2 mouse device common for all mice
[    0.445440] rtc_cmos 00:04: RTC can wake from S4
[    0.446140] rtc_cmos 00:04: registered as rtc0
[    0.446579] rtc_cmos 00:04: setting system clock to 2023-01-07T01:17:46 UTC (1673054266)
[    0.447238] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.448112] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.448639] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.449094] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.449908] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.450823] intel_pstate: CPU model not supported
[    0.451230] sdhci: Secure Digital Host Controller Interface driver
[    0.451710] sdhci: Copyright(c) Pierre Ossman
[    0.452084] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.452604] usbcore: registered new interface driver usbhid
[    0.453054] usbhid: USB HID core driver
[    0.453386] u32 classifier
[    0.453599]     input device check on
[    0.453888]     Actions configured
[    0.454297] NET: Registered PF_INET6 protocol family
[    0.455074] Segment Routing with IPv6
[    0.455396] In-situ OAM (IOAM) with IPv6
[    0.455717] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.456278] NET: Registered PF_PACKET protocol family
[    0.456710] Bridge firewalling registered
[    0.457043] Key type dns_resolver registered
[    0.457445] NET: Registered PF_VSOCK protocol family
[    0.458328] IPI shorthand broadcast: enabled
[    0.458730] sched_clock: Marking stable (404395989, 53903960)->(565300936, -107000987)
[    0.459477] Loading compiled-in X.509 certificates
[    0.460014] Key type ._fscrypt registered
[    0.460349] Key type .fscrypt registered
[    0.460658] Key type fscrypt-provisioning registered
[    0.461262] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.462404] Key type encrypted registered
[    0.464603] printk: console [netcon0] enabled
[    0.464962] netconsole: network logging started
[    0.667060] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.719918] ata2: SATA link down (SStatus 0 SControl 300)
[    0.720430] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.721035] ata5: SATA link down (SStatus 0 SControl 300)
[    0.721507] ata6: SATA link down (SStatus 0 SControl 300)
[    0.722057] ata4: SATA link down (SStatus 0 SControl 300)
[    0.722520] ata1: SATA link down (SStatus 0 SControl 300)
[    0.722925] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.723334] ata3.00: applying bridge limits
[    0.723779] ata3.00: configured for UDMA/100
[    0.724440] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.763437] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.763874] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.793052] IP-Config: Complete:
[    0.793350]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    0.794229]      host=192.168.7.2, domain=, nis-domain=(none)
[    0.794686]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.794688]      nameserver0=8.8.8.8
[    0.795829] md: Waiting for all devices to be available before autodetect
[    0.796218] md: If you don't use raid, use raid=noautodetect
[    0.796524] md: Autodetecting RAID arrays.
[    0.796746] md: autorun ...
[    0.796896] md: ... autorun DONE.
[    0.798241] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    0.798766] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.799373] devtmpfs: mounted
[    0.800691] Freeing unused kernel image (initmem) memory: 1936K
[    0.801644] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    0.802456] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    0.805015] Write protecting the kernel read-only data: 22528k
[    0.806100] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.806666] Freeing unused kernel image (rodata/data gap) memory: 364K
[    0.807081] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    0.864477] udevd[171]: starting version 3.2.11
[    0.868433] udevd[172]: starting eudev-3.2.11
[    0.917984] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.055560] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.108363] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.174155] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan  7 01:17:46 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    1.449016] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
D-BUS per-session daemon address is: unix:path=/tmp/dbus-ABHJSV3flB,guid=c6bd899484423b04e7e0fa0663b8c83a
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
[settings daemon] Forking. run with -n to prevent fork
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[587]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=583 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[587]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCua75RC2CIHkbUtqddyAD12LcAc8BKUiQozTiFwihtF+JKIgFlLg78qUl3Xv6tyqlD0tam63xxFReNmbG6ZiFtXxz9Tf2OqfGtSYOYAXVac2w7MWJMYNyZoz0nybJF8fKhWezuWBJUncQRWzPcTEdhiQgPu1oyh89S4fQMqzvR0fYyMlySFp3lpqZn6aKXm6/0MHRVdB4IZiGF2TxgZg4xHAaYPjJaPoq6wfwAWM16+VAx3+rL7KhnmYOkGwptD/PBDO2cmZBtgzTg4R8uo2q00J8+TRhCwNZs+mnLOwUgOlzyImpMYAbuRoEK6m4RremH4jG2/TJt86f1GgLBJeIn root@qemux86-64
Fingerprint: SHA256:z7SpwoXZQEgO23MDbdrFT0eBdQd0b0v3qv+s4YrAdPs
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    1.793568] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.793836] Bluetooth: BNEP filters: protocol multicast
[    1.794076] Bluetooth: BNEP socket layer initialized
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 