[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Fri Nov 18 21:13:18 UTC 2022
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a40-0x0000000000ad3a6f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a70-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 486193430 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000011] tsc: Detected 2299.996 MHz processor
[    0.001217] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001259] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011708] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.011991] ACPI: Early table checksum verification disabled
[    0.012023] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.012032] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012046] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012053] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012058] ACPI: FACS 0x000000000FFE0000 000040
[    0.012063] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012067] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012071] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012076] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012079] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.012081] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.012082] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.012083] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.012084] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.012084] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.012085] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.012171] Zone ranges:
[    0.012172]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012175]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.012176]   Normal   empty
[    0.012177] Movable zone start for each node
[    0.012178] Early memory node ranges
[    0.012178]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.012181]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.012184] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.012581] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012599] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.013259] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.013854] ACPI: PM-Timer IO Port: 0x608
[    0.013869] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.013912] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.013916] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.013918] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.013919] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.013923] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.013924] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.013931] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.013933] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.013951] TSC deadline timer available
[    0.013953] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.014004] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.014005] Booting paravirtualized kernel on KVM
[    0.014015] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.014025] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.014607] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.014657] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.014659] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.014775] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.014797] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.015393] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.016247] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved)
[    0.016316] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.016330] Kernel/User page tables isolation: enabled
[    0.016353] ftrace: allocating 47075 entries in 184 pages
[    0.028988] ftrace: allocated 184 pages with 4 groups
[    0.029059] Dynamic Preempt: full
[    0.029470] rcu: Preemptible hierarchical RCU implementation.
[    0.029471] rcu: 	RCU event tracing is enabled.
[    0.029472] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.029474] 	All grace periods are expedited (rcu_expedited).
[    0.029474] 	Trampoline variant of Tasks RCU enabled.
[    0.029475] 	Rude variant of Tasks RCU enabled.
[    0.029475] 	Tracing variant of Tasks RCU enabled.
[    0.029476] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.029477] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.034792] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.034974] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.035106] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.035122] random: crng init done
[    0.041704] Console: colour VGA+ 80x25
[    0.187966] printk: console [ttyS0] enabled
[    0.188664] ACPI: Core revision 20220331
[    0.189529] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.191232] APIC: Switch to symmetric I/O mode setup
[    0.192403] x2apic enabled
[    0.193183] Switched APIC routing to physical x2apic.
[    0.195356] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.196481] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns
[    0.198318] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996)
[    0.199320] pid_max: default: 32768 minimum: 301
[    0.200342] LSM: Security Framework initializing
[    0.201328] landlock: Up and running.
[    0.201977] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.202320] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.204213] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.204342] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.205329] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.206323] Spectre V2 : Mitigation: Retpolines
[    0.207319] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.208319] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.209319] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.210319] RETBleed: Vulnerable
[    0.211319] Speculative Store Bypass: Vulnerable
[    0.212326] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.213319] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.214322] SRBDS: Unknown: Dependent on hypervisor status
[    0.236623] Freeing SMP alternatives memory: 52K
[    0.237473] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.238484] cblist_init_generic: Setting adjustable number of callback queues.
[    0.239321] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.240345] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.241343] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.242348] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.243390] rcu: Hierarchical SRCU implementation.
[    0.244249] rcu: 	Max phase no-delay instances is 400.
[    0.244613] smp: Bringing up secondary CPUs ...
[    0.245433] x86: Booting SMP configuration:
[    0.246219] .... node  #0, CPUs:      #1 #2 #3
[    0.247764] smp: Brought up 1 node, 4 CPUs
[    0.249042] smpboot: Max logical packages: 1
[    0.249321] smpboot: Total of 4 processors activated (18399.96 BogoMIPS)
[    0.250651] devtmpfs: initialized
[    0.251506] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.252325] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.253363] pinctrl core: initialized pinctrl subsystem
[    0.255039] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.255489] thermal_sys: Registered thermal governor 'step_wise'
[    0.255491] thermal_sys: Registered thermal governor 'user_space'
[    0.256397] cpuidle: using governor menu
[    0.260612] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.263328] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.265359] PCI: Using configuration type 1 for base access
[    0.269358] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.287320] raid6: avx2x4   gen() 25054 MB/s
[    0.305320] raid6: avx2x2   gen() 24886 MB/s
[    0.322320] raid6: avx2x1   gen() 22226 MB/s
[    0.323050] raid6: using algorithm avx2x4 gen() 25054 MB/s
[    0.340320] raid6: .... xor() 9303 MB/s, rmw enabled
[    0.341212] raid6: using avx2x2 recovery algorithm
[    0.341391] ACPI: Added _OSI(Module Device)
[    0.342129] ACPI: Added _OSI(Processor Device)
[    0.342321] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.343142] ACPI: Added _OSI(Processor Aggregator Device)
[    0.343321] ACPI: Added _OSI(Linux-Dell-Video)
[    0.344118] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.344321] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.346303] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.347507] ACPI: Interpreter enabled
[    0.348180] ACPI: PM: (supports S0 S3 S5)
[    0.348322] ACPI: Using IOAPIC for interrupt routing
[    0.349170] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.349321] PCI: Using E820 reservations for host bridge windows
[    0.350411] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.353289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.353326] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.354368] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.355384] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.356379] PCI host bridge to bus 0000:00
[    0.357076] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.357321] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.358320] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.359321] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.360320] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.361320] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.362321] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.363302] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.364006] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.366263] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.367322] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.372322] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.375321] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.377175] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.378886] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.380321] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.385894] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.388114] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.389970] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.393943] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.395351] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.398341] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.399422] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.401199] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.402322] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.403929] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.407945] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.410176] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.412321] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.414762] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.417068] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.418191] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.420068] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.421244] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.421774] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.424695] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.425860] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.426601] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.431322] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.432748] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.434435] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.438964] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.440525] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.441411] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.442406] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.443414] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.444406] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.445405] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.446409] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.447405] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.448360] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.449332] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.450330] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.451368] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.452332] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.453330] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.454330] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.455331] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.456884] SCSI subsystem initialized
[    0.457428] ACPI: bus type USB registered
[    0.458093] usbcore: registered new interface driver usbfs
[    0.458335] usbcore: registered new interface driver hub
[    0.459295] usbcore: registered new device driver usb
[    0.459340] pps_core: LinuxPPS API ver. 1 registered
[    0.460181] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.460324] PTP clock support registered
[    0.461445] Bluetooth: Core ver 2.22
[    0.462086] NET: Registered PF_BLUETOOTH protocol family
[    0.462321] Bluetooth: HCI device and connection manager initialized
[    0.463325] Bluetooth: HCI socket layer initialized
[    0.464151] Bluetooth: L2CAP socket layer initialized
[    0.464328] Bluetooth: SCO socket layer initialized
[    0.465342] PCI: Using ACPI for IRQ routing
[    0.536458] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.537317] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.537317] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.537326] vgaarb: loaded
[    0.537923] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.538321] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.543397] clocksource: Switched to clocksource kvm-clock
[    0.544497] pnp: PnP ACPI init
[    0.545240] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.546733] pnp: PnP ACPI: found 6 devices
[    0.554599] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.556149] NET: Registered PF_INET protocol family
[    0.558478] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.560047] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.568270] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.569576] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.570868] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.572069] TCP: Hash tables configured (established 2048 bind 2048)
[    0.573171] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.574278] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.575500] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.576878] RPC: Registered named UNIX socket transport module.
[    0.578022] RPC: Registered udp transport module.
[    0.578823] RPC: Registered tcp transport module.
[    0.579618] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.580725] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.581768] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.582817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.583968] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.585129] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.586281] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.587803] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.590814] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.592481] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.594136] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.595747] PCI: CLS 0 bytes, default 64
[    0.596750] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.598208] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns
[    0.600820] Initialise system trusted keyrings
[    0.601744] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.604784] NFS: Registering the id_resolver key type
[    0.605682] Key type id_resolver registered
[    0.606392] Key type id_legacy registered
[    0.607497] Key type cifs.idmap registered
[    0.619078] xor: automatically using best checksumming function   avx       
[    0.621089] Key type asymmetric registered
[    0.621784] Asymmetric key parser 'x509' registered
[    0.622633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.623866] io scheduler mq-deadline registered
[    0.624635] io scheduler kyber registered
[    0.625881] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.631376] ACPI: button: Power Button [PWRF]
[    0.632974] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.635643] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.637889] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.640114] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.643495] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.644806] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.646272] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.647703] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.655372] Linux agpgart interface v0.103
[    0.656197] ACPI: bus type drm_connector registered
[    0.657215] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.658187] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.668993] Console: switching to colour dummy device 80x25
[    0.670239] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.670241] [drm] features: -context_init
[    0.672864] [drm] number of scanouts: 1
[    0.673559] [drm] number of cap sets: 0
[    0.674724] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.679875] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.699486] Console: switching to colour frame buffer device 160x50
[    0.722771] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.729370] brd: module loaded
[    0.733559] loop: module loaded
[    0.735166] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.740470] virtio_blk virtio3: [vda] 55652 512-byte logical blocks (28.5 MB/27.2 MiB)
[    0.746143] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.747632] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.750182] scsi host0: ahci
[    0.750973] scsi host1: ahci
[    0.751680] scsi host2: ahci
[    0.752369] scsi host3: ahci
[    0.753097] scsi host4: ahci
[    0.753825] scsi host5: ahci
[    0.754449] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.755719] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.756953] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.758193] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.759522] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.760760] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.763737] e100: Intel(R) PRO/100 Network Driver
[    0.764728] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.765653] e1000: Intel(R) PRO/1000 Network Driver
[    0.766486] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.767466] e1000e: Intel(R) PRO/1000 Network Driver
[    0.768306] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.769382] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.770273] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.771213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.772300] ehci-pci: EHCI PCI platform driver
[    0.773827] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.774758] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.776228] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.783366] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.784595] hub 1-0:1.0: USB hub found
[    0.785270] hub 1-0:1.0: 6 ports detected
[    0.786178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.787248] ohci-pci: OHCI PCI platform driver
[    0.788000] uhci_hcd: USB Universal Host Controller Interface driver
[    0.789788] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.790697] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.792050] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.793342] hub 2-0:1.0: USB hub found
[    0.794019] hub 2-0:1.0: 2 ports detected
[    0.795550] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.796477] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.797947] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.799241] hub 3-0:1.0: USB hub found
[    0.799920] hub 3-0:1.0: 2 ports detected
[    0.801453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.802361] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.803832] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.805329] hub 4-0:1.0: USB hub found
[    0.805999] hub 4-0:1.0: 2 ports detected
[    0.806987] usbcore: registered new interface driver usb-storage
[    0.808087] usbcore: registered new interface driver usbserial_generic
[    0.809263] usbserial: USB Serial support registered for generic
[    0.810419] usbcore: registered new interface driver ftdi_sio
[    0.811558] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.812914] usbcore: registered new interface driver pl2303
[    0.813960] usbserial: USB Serial support registered for pl2303
[    0.815031] i8042: PNP: No PS/2 controller found.
[    0.815945] mousedev: PS/2 mouse device common for all mice
[    0.828391] rtc_cmos 00:04: RTC can wake from S4
[    0.829954] rtc_cmos 00:04: registered as rtc0
[    0.830938] rtc_cmos 00:04: setting system clock to 2023-01-09T09:05:15 UTC (1673255115)
[    0.832553] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.834449] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.835696] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.836833] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.838709] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.840483] intel_pstate: CPU model not supported
[    0.841457] sdhci: Secure Digital Host Controller Interface driver
[    0.842675] sdhci: Copyright(c) Pierre Ossman
[    0.843515] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.844702] usbcore: registered new interface driver usbhid
[    0.846936] usbhid: USB HID core driver
[    0.847635] u32 classifier
[    0.848113]     input device check on
[    0.848743]     Actions configured
[    0.849490] NET: Registered PF_INET6 protocol family
[    0.850875] Segment Routing with IPv6
[    0.851579] In-situ OAM (IOAM) with IPv6
[    0.852283] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.853431] NET: Registered PF_PACKET protocol family
[    0.854342] Bridge firewalling registered
[    0.855243] Key type dns_resolver registered
[    0.856059] NET: Registered PF_VSOCK protocol family
[    0.857352] IPI shorthand broadcast: enabled
[    0.858134] sched_clock: Marking stable (697984529, 159336201)->(945240497, -87919767)
[    0.859708] Loading compiled-in X.509 certificates
[    0.860666] Key type ._fscrypt registered
[    0.861408] Key type .fscrypt registered
[    0.862078] Key type fscrypt-provisioning registered
[    0.863587] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.865443] Key type encrypted registered
[    0.867756] printk: console [netcon0] enabled
[    0.868547] netconsole: network logging started
[    1.027372] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.071861] ata2: SATA link down (SStatus 0 SControl 300)
[    1.074372] ata5: SATA link down (SStatus 0 SControl 300)
[    1.076748] ata1: SATA link down (SStatus 0 SControl 300)
[    1.084526] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.087236] ata6: SATA link down (SStatus 0 SControl 300)
[    1.089337] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.091840] ata3.00: applying bridge limits
[    1.093592] ata4: SATA link down (SStatus 0 SControl 300)
[    1.094757] ata3.00: configured for UDMA/100
[    1.096898] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.132765] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.135359] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.161195] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.164723] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.167364] IP-Config: Complete:
[    1.168736]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.170752]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.171906]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.171909]      nameserver0=8.8.8.8
[    1.174854] md: Waiting for all devices to be available before autodetect
[    1.175925] md: If you don't use raid, use raid=noautodetect
[    1.176779] md: Autodetecting RAID arrays.
[    1.177395] md: autorun ...
[    1.177814] md: ... autorun DONE.
[    1.179848] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.180928] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.181853] devtmpfs: mounted
[    1.183928] Freeing unused kernel image (initmem) memory: 1936K
[    1.184720] Write protecting the kernel read-only data: 22528k
[    1.186871] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.187876] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.188767] Run /sbin/init as init process
INIT: version 3.04 booting
Starting udev
[    1.242018] udevd[161]: starting version 3.2.11
[    1.247390] udevd[162]: starting eudev-3.2.11
[    1.286332] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.430195] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.481611] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.548860] EXT4-fs (vda): re-mounted. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: [    1.825379] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
