[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000001ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 481415264 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000010] tsc: Detected 2599.986 MHz processor
[    0.000980] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001017] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008602] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.008877] ACPI: Early table checksum verification disabled
[    0.008909] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.008917] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008930] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008935] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008939] ACPI: FACS 0x000000001FFE0000 000040
[    0.008942] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008946] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008949] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008952] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008955] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df]
[    0.008956] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb]
[    0.008957] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008958] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f]
[    0.008958] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7]
[    0.008959] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3]
[    0.008960] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b]
[    0.009038] Zone ranges:
[    0.009039]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009041]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.009043]   Normal   empty
[    0.009044] Movable zone start for each node
[    0.009044] Early memory node ranges
[    0.009044]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.009047]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.009050] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.009595] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009610] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.011676] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012154] ACPI: PM-Timer IO Port: 0x608
[    0.012167] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012205] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012208] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012210] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012211] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012215] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012216] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012222] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012223] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012228] TSC deadline timer available
[    0.012231] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012277] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.012278] Booting paravirtualized kernel on KVM
[    0.012287] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012297] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.013016] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.013060] Built 1 zonelists, mobility grouping on.  Total pages: 128727
[    0.013062] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013216] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.013261] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.013966] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.015235] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved)
[    0.015295] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.015308] Kernel/User page tables isolation: enabled
[    0.015330] ftrace: allocating 47075 entries in 184 pages
[    0.026508] ftrace: allocated 184 pages with 4 groups
[    0.026559] Dynamic Preempt: full
[    0.027115] rcu: Preemptible hierarchical RCU implementation.
[    0.027115] rcu: 	RCU event tracing is enabled.
[    0.027116] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.027117] 	All grace periods are expedited (rcu_expedited).
[    0.027118] 	Trampoline variant of Tasks RCU enabled.
[    0.027118] 	Rude variant of Tasks RCU enabled.
[    0.027119] 	Tracing variant of Tasks RCU enabled.
[    0.027119] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.027120] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.031408] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.031573] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.031675] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.031689] random: crng init done
[    0.038489] Console: colour VGA+ 80x25
[    0.142772] printk: console [ttyS0] enabled
[    0.143303] ACPI: Core revision 20220331
[    0.143978] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.145270] APIC: Switch to symmetric I/O mode setup
[    0.146179] x2apic enabled
[    0.146833] Switched APIC routing to physical x2apic.
[    0.148596] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.149442] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns
[    0.150802] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599986)
[    0.151803] pid_max: default: 32768 minimum: 301
[    0.152817] LSM: Security Framework initializing
[    0.153435] landlock: Up and running.
[    0.154369] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.154804] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.157296] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.157825] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.158812] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.159806] Spectre V2 : Mitigation: Retpolines
[    0.160374] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.160802] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161802] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.162803] RETBleed: Vulnerable
[    0.163212] Speculative Store Bypass: Vulnerable
[    0.163809] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.164803] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.165803] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.166805] SRBDS: Unknown: Dependent on hypervisor status
[    0.176836] Freeing SMP alternatives memory: 52K
[    0.177561] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.177925] cblist_init_generic: Setting adjustable number of callback queues.
[    0.178804] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.179596] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.179819] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.180651] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.180860] rcu: Hierarchical SRCU implementation.
[    0.181525] rcu: 	Max phase no-delay instances is 400.
[    0.182028] smp: Bringing up secondary CPUs ...
[    0.182754] x86: Booting SMP configuration:
[    0.182806] .... node  #0, CPUs:      #1 #2 #3
[    0.184389] smp: Brought up 1 node, 4 CPUs
[    0.185327] smpboot: Max logical packages: 1
[    0.185804] smpboot: Total of 4 processors activated (20799.88 BogoMIPS)
[    0.186901] devtmpfs: initialized
[    0.187438] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.187809] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.188729] pinctrl core: initialized pinctrl subsystem
[    0.189615] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.189943] thermal_sys: Registered thermal governor 'step_wise'
[    0.189944] thermal_sys: Registered thermal governor 'user_space'
[    0.190812] cpuidle: using governor menu
[    0.191937] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.192805] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.193695] PCI: Using configuration type 1 for base access
[    0.195097] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.213805] raid6: avx2x4   gen() 11701 MB/s
[    0.232019] raid6: avx2x2   gen() 11699 MB/s
[    0.250152] raid6: avx2x1   gen() 10287 MB/s
[    0.251807] raid6: using algorithm avx2x4 gen() 11701 MB/s
[    0.270136] raid6: .... xor() 6476 MB/s, rmw enabled
[    0.271807] raid6: using avx2x2 recovery algorithm
[    0.272870] ACPI: Added _OSI(Module Device)
[    0.274807] ACPI: Added _OSI(Processor Device)
[    0.275806] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.276806] ACPI: Added _OSI(Processor Aggregator Device)
[    0.278807] ACPI: Added _OSI(Linux-Dell-Video)
[    0.279807] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.281806] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.284463] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.289108] ACPI: Interpreter enabled
[    0.289844] ACPI: PM: (supports S0 S3 S5)
[    0.290807] ACPI: Using IOAPIC for interrupt routing
[    0.292852] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.295807] PCI: Using E820 reservations for host bridge windows
[    0.297972] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.303119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.304814] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.306890] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.308907] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.310886] PCI host bridge to bus 0000:00
[    0.311808] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.313806] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.315806] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.317806] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.318805] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.320805] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.322806] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.323889] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.326690] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.331807] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.335806] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.343807] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.347806] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.350537] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.352806] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.355806] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.363399] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.366693] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.369503] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.375473] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.377834] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.381823] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.384920] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.386760] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.390806] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.392805] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.398361] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.401696] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.405181] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.408678] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.422337] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.423689] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.426561] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.429674] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.430247] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.433788] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.435386] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.437080] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.442102] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.443401] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.445858] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.449502] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.454997] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.456892] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.457883] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.458884] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.459882] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.460881] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.461881] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.462869] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.463656] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.464811] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.465574] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.465810] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.466579] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.467810] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.468580] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.468813] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.470088] SCSI subsystem initialized
[    0.470963] ACPI: bus type USB registered
[    0.471389] usbcore: registered new interface driver usbfs
[    0.472815] usbcore: registered new interface driver hub
[    0.473492] usbcore: registered new device driver usb
[    0.473817] pps_core: LinuxPPS API ver. 1 registered
[    0.474462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.475806] PTP clock support registered
[    0.476324] Bluetooth: Core ver 2.22
[    0.476811] NET: Registered PF_BLUETOOTH protocol family
[    0.477482] Bluetooth: HCI device and connection manager initialized
[    0.477808] Bluetooth: HCI socket layer initialized
[    0.478426] Bluetooth: L2CAP socket layer initialized
[    0.479809] Bluetooth: SCO socket layer initialized
[    0.480451] PCI: Using ACPI for IRQ routing
[    0.536978] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.537632] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.537801] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.539806] vgaarb: loaded
[    0.540217] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.540804] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.546862] clocksource: Switched to clocksource kvm-clock
[    0.558689] pnp: PnP ACPI init
[    0.559276] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.560408] pnp: PnP ACPI: found 6 devices
[    0.568236] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.569434] NET: Registered PF_INET protocol family
[    0.570115] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.571410] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.572511] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.573510] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.574521] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.576671] TCP: Hash tables configured (established 4096 bind 4096)
[    0.577521] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.578383] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.579321] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.580298] RPC: Registered named UNIX socket transport module.
[    0.581205] RPC: Registered udp transport module.
[    0.581821] RPC: Registered tcp transport module.
[    0.582447] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.583288] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.584089] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.584888] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.585777] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.586673] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.587561] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.588734] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.590103] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.591402] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.592685] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.594010] PCI: CLS 0 bytes, default 64
[    0.594861] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.595994] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns
[    0.598184] Initialise system trusted keyrings
[    0.598883] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.601007] NFS: Registering the id_resolver key type
[    0.601693] Key type id_resolver registered
[    0.602252] Key type id_legacy registered
[    0.603155] Key type cifs.idmap registered
[    0.612290] xor: automatically using best checksumming function   avx       
[    0.613214] Key type asymmetric registered
[    0.613754] Asymmetric key parser 'x509' registered
[    0.614403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.615362] io scheduler mq-deadline registered
[    0.615959] io scheduler kyber registered
[    0.616825] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.618918] ACPI: button: Power Button [PWRF]
[    0.621579] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.626260] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.630782] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.635311] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.640576] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.643118] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.646037] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.648884] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.653713] Linux agpgart interface v0.103
[    0.655378] ACPI: bus type drm_connector registered
[    0.657347] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.659270] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.695890] Console: switching to colour dummy device 80x25
[    0.698285] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.698289] [drm] features: -context_init
[    0.703777] [drm] number of scanouts: 1
[    0.705012] [drm] number of cap sets: 0
[    0.706727] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.714331] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.755143] Console: switching to colour frame buffer device 160x50
[    0.774085] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.780365] brd: module loaded
[    0.783780] loop: module loaded
[    0.785170] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.790210] virtio_blk virtio3: [vda] 924176 512-byte logical blocks (473 MB/451 MiB)
[    0.797297] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.800136] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.803979] scsi host0: ahci
[    0.805357] scsi host1: ahci
[    0.806675] scsi host2: ahci
[    0.807992] scsi host3: ahci
[    0.809299] scsi host4: ahci
[    0.810632] scsi host5: ahci
[    0.811824] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.814388] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.816853] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.819319] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.821789] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.824262] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.829919] e100: Intel(R) PRO/100 Network Driver
[    0.831563] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.833402] e1000: Intel(R) PRO/1000 Network Driver
[    0.835123] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.837069] e1000e: Intel(R) PRO/1000 Network Driver
[    0.838774] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.840818] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.842638] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.844553] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.846752] ehci-pci: EHCI PCI platform driver
[    0.849578] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.851374] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.854294] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.862881] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.865111] hub 1-0:1.0: USB hub found
[    0.866371] hub 1-0:1.0: 6 ports detected
[    0.868042] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.869992] ohci-pci: OHCI PCI platform driver
[    0.871413] uhci_hcd: USB Universal Host Controller Interface driver
[    0.874532] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.876197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.878716] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.880886] hub 2-0:1.0: USB hub found
[    0.882157] hub 2-0:1.0: 2 ports detected
[    0.885072] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.887094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.890207] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.892364] hub 3-0:1.0: USB hub found
[    0.893669] hub 3-0:1.0: 2 ports detected
[    0.896096] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.897762] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.900510] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.902655] hub 4-0:1.0: USB hub found
[    0.903882] hub 4-0:1.0: 2 ports detected
[    0.905447] usbcore: registered new interface driver usb-storage
[    0.907322] usbcore: registered new interface driver usbserial_generic
[    0.909501] usbserial: USB Serial support registered for generic
[    0.911280] usbcore: registered new interface driver ftdi_sio
[    0.912962] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.915068] usbcore: registered new interface driver pl2303
[    0.916595] usbserial: USB Serial support registered for pl2303
[    0.918232] i8042: PNP: No PS/2 controller found.
[    0.919509] mousedev: PS/2 mouse device common for all mice
[    0.921205] rtc_cmos 00:04: RTC can wake from S4
[    0.923911] rtc_cmos 00:04: registered as rtc0
[    0.925116] rtc_cmos 00:04: setting system clock to 2023-01-09T10:54:03 UTC (1673261643)
[    0.936360] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.938639] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.940506] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.942167] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.944543] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.947038] intel_pstate: CPU model not supported
[    0.948392] sdhci: Secure Digital Host Controller Interface driver
[    0.950081] sdhci: Copyright(c) Pierre Ossman
[    0.951240] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.952847] usbcore: registered new interface driver usbhid
[    0.954329] usbhid: USB HID core driver
[    0.955303] u32 classifier
[    0.955976]     input device check on
[    0.956871]     Actions configured
[    0.957922] NET: Registered PF_INET6 protocol family
[    0.959679] Segment Routing with IPv6
[    0.960624] In-situ OAM (IOAM) with IPv6
[    0.961595] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.963168] NET: Registered PF_PACKET protocol family
[    0.964394] Bridge firewalling registered
[    0.965375] Key type dns_resolver registered
[    0.966437] NET: Registered PF_VSOCK protocol family
[    0.968034] IPI shorthand broadcast: enabled
[    0.968988] sched_clock: Marking stable (853729233, 115222876)->(990433694, -21481585)
[    0.970785] Loading compiled-in X.509 certificates
[    0.971921] Key type ._fscrypt registered
[    0.972758] Key type .fscrypt registered
[    0.973560] Key type fscrypt-provisioning registered
[    0.974900] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.977069] Key type encrypted registered
[    0.980748] printk: console [netcon0] enabled
[    0.981665] netconsole: network logging started
[    1.107831] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.135993] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.138475] ata4: SATA link down (SStatus 0 SControl 300)
[    1.140649] ata5: SATA link down (SStatus 0 SControl 300)
[    1.142848] ata1: SATA link down (SStatus 0 SControl 300)
[    1.145016] ata6: SATA link down (SStatus 0 SControl 300)
[    1.147163] ata2: SATA link down (SStatus 0 SControl 300)
[    1.149105] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.151051] ata3.00: applying bridge limits
[    1.152689] ata3.00: configured for UDMA/100
[    1.155191] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.193975] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.196265] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.227836] IP-Config: Complete:
[    1.229008]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.232385]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.234379]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.234383]      nameserver0=8.8.8.8
[    1.239327] md: Waiting for all devices to be available before autodetect
[    1.241070] md: If you don't use raid, use raid=noautodetect
[    1.242686] md: Autodetecting RAID arrays.
[    1.243721] md: autorun ...
[    1.244645] md: ... autorun DONE.
[    1.248022] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.248099] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.250224] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.253164] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.254918] devtmpfs: mounted
[    1.261811] Freeing unused kernel image (initmem) memory: 1936K
[    1.263459] Write protecting the kernel read-only data: 22528k
[    1.267879] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.269762] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.271370] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.371852] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.382824] udevd[174]: starting version 3.2.11
[    1.393503] udevd[175]: starting eudev-3.2.11
[    1.509677] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.564089] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.635182] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
[    1.841851] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  9 10:54:04 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCkGo849MNXBZAeslex5XK1OpMdD1pnplSFENP96bmPlwkPTdKLyyd4Zr+gNqmEqYd20ApBpmeZFIyJN3fqPW/o3h+C6+104oQSQbQ/ITJxXrvBamdBUN9es44D0jL8LqJaaOTH6Y+De+IXxpjpmeC4yyh2V+ufyvZxEgorlwDKPJQCGlKFPLIj4KjF4wtBYQuh1nWfrT8ciD8ERTEXB4drpKq+SdB61NZmKS0szypgLlldNST8yBtOSrtl1RUQgsJmsSyJB48Cfaj8qC+E8u5HsL3BZpbruNFbn2MsoHrFBBLVGiC8zEHlVm+u5QKA66UnmaCg1lX2IfCszMfe9OmR root@qemux86-64
Fingerprint: SHA256:coI5BEn1r4ONEq3QLuwiOAPGh1fgd+T7+6NUVgAr+N4
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    2.146593] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.151828] Bluetooth: BNEP filters: protocol multicast
[    2.153767] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-9O939KeLd4,guid=84f239e05f77b5747cc0589263bbf24c
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[654]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=664 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[654]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0x1000003): BadWindow (invalid Window parameter) (opcode: 12)

(connman-applet:632): Gdk-[1;35mCRITICAL[0m **: [34m10:54:04.586[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
