[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 507069774 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000012] tsc: Detected 2599.996 MHz processor
[    0.001509] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001560] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009772] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.010119] ACPI: Early table checksum verification disabled
[    0.010141] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.010151] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010168] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010176] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010181] ACPI: FACS 0x000000000FFE0000 000040
[    0.010186] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010190] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010195] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010200] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010204] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.010206] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.010207] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.010209] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.010210] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.010211] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.010213] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.010298] Zone ranges:
[    0.010299]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010302]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.010304]   Normal   empty
[    0.010306] Movable zone start for each node
[    0.010307] Early memory node ranges
[    0.010308]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010310]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.010311] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.010902] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010928] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.011862] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012413] ACPI: PM-Timer IO Port: 0x608
[    0.012427] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012479] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012483] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012486] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012488] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012494] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012496] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012502] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012503] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012508] TSC deadline timer available
[    0.012510] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012555] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.012558] Booting paravirtualized kernel on KVM
[    0.012565] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012572] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.013069] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.013127] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.013129] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013253] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.013281] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.014047] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.015406] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved)
[    0.015497] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.015507] Kernel/User page tables isolation: enabled
[    0.015528] ftrace: allocating 47075 entries in 184 pages
[    0.030154] ftrace: allocated 184 pages with 4 groups
[    0.030260] Dynamic Preempt: full
[    0.030885] rcu: Preemptible hierarchical RCU implementation.
[    0.030886] rcu: 	RCU event tracing is enabled.
[    0.030887] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.030889] 	All grace periods are expedited (rcu_expedited).
[    0.030890] 	Trampoline variant of Tasks RCU enabled.
[    0.030890] 	Rude variant of Tasks RCU enabled.
[    0.030891] 	Tracing variant of Tasks RCU enabled.
[    0.030892] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.030894] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.037161] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.037391] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.037520] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.037543] random: crng init done
[    0.051378] Console: colour VGA+ 80x25
[    0.185654] printk: console [ttyS0] enabled
[    0.186286] ACPI: Core revision 20220331
[    0.187100] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.188659] APIC: Switch to symmetric I/O mode setup
[    0.189717] x2apic enabled
[    0.190458] Switched APIC routing to physical x2apic.
[    0.192617] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.193593] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.197074] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.198076] pid_max: default: 32768 minimum: 301
[    0.199113] LSM: Security Framework initializing
[    0.200087] landlock: Up and running.
[    0.200695] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.201077] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.203313] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.204078] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.205077] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.206077] Spectre V2 : Mitigation: Retpolines
[    0.207075] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.208075] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.209075] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.210075] RETBleed: Vulnerable
[    0.210561] Speculative Store Bypass: Vulnerable
[    0.211089] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.212075] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.213075] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.214075] SRBDS: Unknown: Dependent on hypervisor status
[    0.238844] Freeing SMP alternatives memory: 52K
[    0.239289] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.240290] cblist_init_generic: Setting adjustable number of callback queues.
[    0.241076] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.242121] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.243092] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.244061] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.244140] rcu: Hierarchical SRCU implementation.
[    0.244858] rcu: 	Max phase no-delay instances is 400.
[    0.245430] smp: Bringing up secondary CPUs ...
[    0.246228] x86: Booting SMP configuration:
[    0.246906] .... node  #0, CPUs:      #1 #2 #3
[    0.256603] smp: Brought up 1 node, 4 CPUs
[    0.258095] smpboot: Max logical packages: 1
[    0.259084] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.260523] devtmpfs: initialized
[    0.261306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.262089] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.263146] pinctrl core: initialized pinctrl subsystem
[    0.265241] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.266295] thermal_sys: Registered thermal governor 'step_wise'
[    0.266298] thermal_sys: Registered thermal governor 'user_space'
[    0.267204] cpuidle: using governor menu
[    0.269391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.271083] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.272113] PCI: Using configuration type 1 for base access
[    0.276149] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.294078] raid6: avx2x4   gen() 15474 MB/s
[    0.311079] raid6: avx2x2   gen() 15669 MB/s
[    0.329079] raid6: avx2x1   gen() 13467 MB/s
[    0.330084] raid6: using algorithm avx2x2 gen() 15669 MB/s
[    0.347077] raid6: .... xor() 10218 MB/s, rmw enabled
[    0.348083] raid6: using avx2x2 recovery algorithm
[    0.348915] ACPI: Added _OSI(Module Device)
[    0.349077] ACPI: Added _OSI(Processor Device)
[    0.349751] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.350077] ACPI: Added _OSI(Processor Aggregator Device)
[    0.350870] ACPI: Added _OSI(Linux-Dell-Video)
[    0.351077] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.351859] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.353438] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.355344] ACPI: Interpreter enabled
[    0.355922] ACPI: PM: (supports S0 S3 S5)
[    0.356078] ACPI: Using IOAPIC for interrupt routing
[    0.357140] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.358078] PCI: Using E820 reservations for host bridge windows
[    0.359321] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.362752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.363084] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.364146] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.365138] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.366161] PCI host bridge to bus 0000:00
[    0.366777] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.367087] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.368080] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.369078] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.370077] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.371077] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.372079] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.373012] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.373783] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.376079] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.380079] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.386007] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.388079] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.389934] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.392980] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.394078] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.398080] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.400913] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.402938] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.406113] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.408896] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.411934] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.412214] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.414016] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.416912] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.418079] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.422989] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.426461] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.429586] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.431347] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.435468] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.437574] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.440580] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.443331] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.444754] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.447795] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.448620] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.449402] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.455024] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.456042] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.459238] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.462572] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.464649] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.465183] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.466178] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.467159] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.468211] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.469180] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.470188] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.471164] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.472133] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.473092] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.474091] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.475092] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.476092] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.477093] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.478091] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.479094] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.480846] SCSI subsystem initialized
[    0.481216] ACPI: bus type USB registered
[    0.481783] usbcore: registered new interface driver usbfs
[    0.482103] usbcore: registered new interface driver hub
[    0.483102] usbcore: registered new device driver usb
[    0.483874] pps_core: LinuxPPS API ver. 1 registered
[    0.484076] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.485085] PTP clock support registered
[    0.486299] Bluetooth: Core ver 2.22
[    0.486869] NET: Registered PF_BLUETOOTH protocol family
[    0.487077] Bluetooth: HCI device and connection manager initialized
[    0.488012] Bluetooth: HCI socket layer initialized
[    0.488078] Bluetooth: L2CAP socket layer initialized
[    0.488833] Bluetooth: SCO socket layer initialized
[    0.489186] PCI: Using ACPI for IRQ routing
[    0.560912] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.561073] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.561073] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.561092] vgaarb: loaded
[    0.561594] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.562076] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.566220] clocksource: Switched to clocksource kvm-clock
[    0.570324] pnp: PnP ACPI init
[    0.571036] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.572400] pnp: PnP ACPI: found 6 devices
[    0.593760] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.595215] NET: Registered PF_INET protocol family
[    0.595988] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.598038] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.599291] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.600406] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.601528] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.602564] TCP: Hash tables configured (established 2048 bind 2048)
[    0.603549] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.604502] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.605574] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.627255] RPC: Registered named UNIX socket transport module.
[    0.630448] RPC: Registered udp transport module.
[    0.631155] RPC: Registered tcp transport module.
[    0.631829] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.632759] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.633670] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.634558] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.635560] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.636548] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.637538] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.639014] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.642990] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.649223] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.652776] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.654756] PCI: CLS 0 bytes, default 64
[    0.657238] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.658893] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.662422] Initialise system trusted keyrings
[    0.664543] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.668017] NFS: Registering the id_resolver key type
[    0.670043] Key type id_resolver registered
[    0.670666] Key type id_legacy registered
[    0.672162] Key type cifs.idmap registered
[    0.684460] xor: automatically using best checksumming function   avx       
[    0.690438] Key type asymmetric registered
[    0.691045] Asymmetric key parser 'x509' registered
[    0.692378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.693460] io scheduler mq-deadline registered
[    0.694120] io scheduler kyber registered
[    0.699544] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.704352] ACPI: button: Power Button [PWRF]
[    0.706999] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.715364] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.717607] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.719947] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.722622] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.724000] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.725484] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.726935] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.729997] Linux agpgart interface v0.103
[    0.731528] ACPI: bus type drm_connector registered
[    0.732425] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.733233] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.751366] Console: switching to colour dummy device 80x25
[    0.752543] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.752546] [drm] features: -context_init
[    0.754998] [drm] number of scanouts: 1
[    0.755602] [drm] number of cap sets: 0
[    0.766959] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.777547] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.802724] Console: switching to colour frame buffer device 160x50
[    0.830424] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.841485] brd: module loaded
[    0.845419] loop: module loaded
[    0.846210] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.848852] virtio_blk virtio3: [vda] 263276 512-byte logical blocks (135 MB/129 MiB)
[    0.854666] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.856001] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.867645] scsi host0: ahci
[    0.875011] scsi host1: ahci
[    0.891208] scsi host2: ahci
[    0.892782] scsi host3: ahci
[    0.895325] scsi host4: ahci
[    0.896468] scsi host5: ahci
[    0.897066] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.898209] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.899347] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.900469] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.901847] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.902996] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.906683] e100: Intel(R) PRO/100 Network Driver
[    0.907435] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.908274] e1000: Intel(R) PRO/1000 Network Driver
[    0.908995] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.909862] e1000e: Intel(R) PRO/1000 Network Driver
[    0.910597] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.911502] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.912301] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.913165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.914127] ehci-pci: EHCI PCI platform driver
[    0.915892] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.916691] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.918167] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.926211] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.927844] hub 1-0:1.0: USB hub found
[    0.928467] hub 1-0:1.0: 6 ports detected
[    0.929356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.930287] ohci-pci: OHCI PCI platform driver
[    0.931357] uhci_hcd: USB Universal Host Controller Interface driver
[    0.933296] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.934094] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.935366] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.937120] hub 2-0:1.0: USB hub found
[    0.937940] hub 2-0:1.0: 2 ports detected
[    0.940152] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.940953] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.942769] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.944460] hub 3-0:1.0: USB hub found
[    0.945292] hub 3-0:1.0: 2 ports detected
[    0.947274] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.948087] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.950018] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.951771] hub 4-0:1.0: USB hub found
[    0.952393] hub 4-0:1.0: 2 ports detected
[    0.953252] usbcore: registered new interface driver usb-storage
[    0.954186] usbcore: registered new interface driver usbserial_generic
[    0.955295] usbserial: USB Serial support registered for generic
[    0.956208] usbcore: registered new interface driver ftdi_sio
[    0.957060] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.958165] usbcore: registered new interface driver pl2303
[    0.958992] usbserial: USB Serial support registered for pl2303
[    0.959919] i8042: PNP: No PS/2 controller found.
[    0.961200] mousedev: PS/2 mouse device common for all mice
[    0.962563] rtc_cmos 00:04: RTC can wake from S4
[    0.964213] rtc_cmos 00:04: registered as rtc0
[    0.964994] rtc_cmos 00:04: setting system clock to 2023-01-10T17:03:02 UTC (1673370182)
[    0.966229] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.967893] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.968845] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.969686] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.971716] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.974895] intel_pstate: CPU model not supported
[    0.976021] sdhci: Secure Digital Host Controller Interface driver
[    0.976946] sdhci: Copyright(c) Pierre Ossman
[    0.977655] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.978655] usbcore: registered new interface driver usbhid
[    0.980950] usbhid: USB HID core driver
[    0.982171] u32 classifier
[    0.982581]     input device check on
[    0.983140]     Actions configured
[    0.983854] NET: Registered PF_INET6 protocol family
[    0.985482] Segment Routing with IPv6
[    0.987526] In-situ OAM (IOAM) with IPv6
[    0.988154] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.989235] NET: Registered PF_PACKET protocol family
[    0.990021] Bridge firewalling registered
[    0.990995] Key type dns_resolver registered
[    0.993296] NET: Registered PF_VSOCK protocol family
[    0.994762] IPI shorthand broadcast: enabled
[    0.995837] sched_clock: Marking stable (840120751, 155671111)->(1149360634, -153568772)
[    0.998221] Loading compiled-in X.509 certificates
[    0.999308] Key type ._fscrypt registered
[    1.000186] Key type .fscrypt registered
[    1.000748] Key type fscrypt-provisioning registered
[    1.002753] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    1.012110] Key type encrypted registered
[    1.016951] printk: console [netcon0] enabled
[    1.017699] netconsole: network logging started
[    1.170103] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.232528] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.234144] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.234997] ata3.00: applying bridge limits
[    1.235975] ata3.00: configured for UDMA/100
[    1.244345] ata1: SATA link down (SStatus 0 SControl 300)
[    1.245349] ata2: SATA link down (SStatus 0 SControl 300)
[    1.246509] ata6: SATA link down (SStatus 0 SControl 300)
[    1.247653] ata4: SATA link down (SStatus 0 SControl 300)
[    1.249800] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.249991] ata5: SATA link down (SStatus 0 SControl 300)
[    1.288578] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.290025] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.304207] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.306271] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.339124] IP-Config: Complete:
[    1.339784]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.341454]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.342417]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.342421]      nameserver0=8.8.8.8
[    1.344915] md: Waiting for all devices to be available before autodetect
[    1.345796] md: If you don't use raid, use raid=noautodetect
[    1.346460] md: Autodetecting RAID arrays.
[    1.346964] md: autorun ...
[    1.347318] md: ... autorun DONE.
[    1.350366] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.351488] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.352679] devtmpfs: mounted
[    1.355344] Freeing unused kernel image (initmem) memory: 1936K
[    1.362181] Write protecting the kernel read-only data: 22528k
[    1.365179] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.366188] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.366914] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.423117] usb 1-2: new high-speed USB device number 3 using ehci-pci
Starting udev
[    1.457139] udevd[170]: starting version 3.2.11
[    1.471095] udevd[171]: starting eudev-3.2.11
[    1.613454] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.666350] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.732702] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.952176] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
[    4.482159] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
starting 8 nfsd kernel threads: [    5.544523] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[    5.546241] NFSD: Using legacy client tracking operations.
[    5.546847] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0

qemux86-64 login: 