[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.28 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11469413201 ns [ 0.000340] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12886981628ns [ 0.018571] Console: colour dummy device 80x25 [ 0.019892] printk: console [tty0] enabled [ 0.021010] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.28 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11469413201 ns [ 0.000340] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12886981628ns [ 0.018571] Console: colour dummy device 80x25 [ 0.019892] printk: console [tty0] enabled [ 0.021010] printk: bootconsole [uart8250] disabled [ 0.024579] Calibrating delay loop... 927.33 BogoMIPS (lpj=4636672) [ 0.198291] pid_max: default: 32768 minimum: 301 [ 0.200087] LSM: Security Framework initializing [ 0.201981] landlock: Up and running. [ 0.208047] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.208413] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.413283] cblist_init_generic: Setting adjustable number of callback queues. [ 0.413739] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.414651] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.415940] Performance counters: No available PMU. [ 0.417659] rcu: Hierarchical SRCU implementation. [ 0.417789] rcu: Max phase no-delay instances is 1000. [ 0.434962] smp: Bringing up secondary CPUs ... [ 0.435314] smp: Brought up 1 node, 1 CPU [ 0.530070] devtmpfs: initialized [ 0.545557] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.546110] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.563926] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.108992] raid6: int32x8 gen() 110 MB/s [ 1.609437] raid6: int32x4 gen() 285 MB/s [ 1.959202] raid6: int32x2 gen() 387 MB/s [ 2.322461] raid6: int32x1 gen() 315 MB/s [ 2.322783] raid6: using algorithm int32x2 gen() 387 MB/s [ 2.734151] raid6: .... xor() 251 MB/s, rmw enabled [ 2.734461] raid6: using intx1 recovery algorithm [ 2.739651] SCSI subsystem initialized [ 2.740876] usbcore: registered new interface driver usbfs [ 2.741471] usbcore: registered new interface driver hub [ 2.741881] usbcore: registered new device driver usb [ 2.742626] pps_core: LinuxPPS API ver. 1 registered [ 2.742736] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.743020] PTP clock support registered [ 2.771456] PCI host bridge to bus 0000:00 [ 2.772074] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.772968] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.773239] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.775622] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 2.776876] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.777026] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.777151] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.777264] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.777395] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.782540] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.783736] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.784181] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.784394] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.784516] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.784655] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.784766] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.785411] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.785595] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.786610] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.787449] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.787669] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.788519] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.788658] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.788863] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.788988] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.789967] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.790150] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.790405] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.790609] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.791177] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.791324] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.791460] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.792013] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.792163] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.792298] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.793375] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.795477] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.795985] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.796197] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.796360] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.796595] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.796741] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.796920] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.797092] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.797227] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.797326] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.797437] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.797546] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.800773] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.801013] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.801178] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.801365] vgaarb: loaded [ 2.804755] clocksource: Switched to clocksource MIPS [ 3.053047] NET: Registered PF_INET protocol family [ 3.055709] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.071883] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 3.072308] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.072536] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.072971] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.073293] TCP: Hash tables configured (established 2048 bind 2048) [ 3.076304] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.076841] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.079890] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.085541] RPC: Registered named UNIX socket transport module. [ 3.085803] RPC: Registered udp transport module. [ 3.085901] RPC: Registered tcp transport module. [ 3.085990] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.087316] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 3.088777] PCI: CLS 0 bytes, default 16 [ 3.105757] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.137390] NFS: Registering the id_resolver key type [ 3.139738] Key type id_resolver registered [ 3.139905] Key type id_legacy registered [ 3.145330] Key type cifs.idmap registered [ 3.429331] xor: measuring software checksum speed [ 3.452512] 8regs : 448 MB/sec [ 3.476626] 8regs_prefetch : 417 MB/sec [ 3.499596] 32regs : 445 MB/sec [ 3.523689] 32regs_prefetch : 422 MB/sec [ 3.524203] xor: using function: 8regs (448 MB/sec) [ 3.525392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.525754] io scheduler mq-deadline registered [ 3.525959] io scheduler kyber registered [ 3.545216] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.550419] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.552134] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.556254] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.568086] printk: console [ttyS0] disabled [ 3.596524] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.596829] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.635795] printk: console [ttyS0] enabled [ 3.706433] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.707017] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.708278] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.743137] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.745518] random: crng init done [ 3.749120] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.750775] [drm] Found bochs VGA, ID 0xb0c5. [ 3.751156] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.758597] [drm] Found EDID data blob. [ 3.771575] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.964663] Console: switching to colour frame buffer device 160x50 [ 4.000597] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 4.158079] brd: module loaded [ 4.160181] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 4.175765] virtio_blk virtio2: [vda] 29184 512-byte logical blocks (14.9 MB/14.3 MiB) [ 4.239937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.241148] ehci-pci: EHCI PCI platform driver [ 4.242178] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.243060] ohci-pci: OHCI PCI platform driver [ 4.251328] uhci_hcd: USB Universal Host Controller Interface driver [ 4.270431] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 4.273497] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 4.275930] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 4.290556] hub 1-0:1.0: USB hub found [ 4.312936] hub 1-0:1.0: 2 ports detected [ 4.341601] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.344232] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.352291] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.359021] usbcore: registered new interface driver usbhid [ 4.360300] usbhid: USB HID core driver [ 4.362043] u32 classifier [ 4.362567] input device check on [ 4.363089] Actions configured [ 4.367447] NET: Registered PF_INET6 protocol family [ 4.382940] Segment Routing with IPv6 [ 4.384325] In-situ OAM (IOAM) with IPv6 [ 4.405481] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.440712] NET: Registered PF_PACKET protocol family [ 4.479241] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.519762] Bridge firewalling registered [ 4.585624] Key type dns_resolver registered [ 4.597618] NET: Registered PF_VSOCK protocol family [ 4.674899] Key type ._fscrypt registered [ 4.697119] Key type .fscrypt registered [ 4.721732] Key type fscrypt-provisioning registered [ 4.772102] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 4.811293] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 4.876333] Key type encrypted registered [ 4.939820] printk: console [netcon0] enabled [ 4.990917] netconsole: network logging started [ 5.132547] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 5.145086] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 5.201911] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 5.415730] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.447814] IP-Config: Complete: [ 5.464197] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 5.534538] host=192.168.7.6, domain=, nis-domain=(none) [ 5.551680] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.551846] nameserver0=8.8.8.8 [ 5.664777] md: Waiting for all devices to be available before autodetect [ 5.676026] md: If you don't use raid, use raid=noautodetect [ 5.686918] md: Autodetecting RAID arrays. [ 5.704588] md: autorun ... [ 5.745465] md: ... autorun DONE. [ 5.844366] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 5.864269] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.897463] devtmpfs: mounted [ 6.024393] Freeing unused kernel image (initmem) memory: 424K [ 6.043111] This architecture does not have kernel memory protection. [ 6.075562] Run /sbin/init as init process [ 6.146092] process '/sbin/init.sysvinit' started with executable stack [ 15.633699] udevd[112]: starting version 3.2.11 [ 16.031663] udevd[113]: starting eudev-3.2.11 [ 19.482347] EXT4-fs (vda): re-mounted. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1 qemumips /dev/ttyS0 qemumips login: