[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gnux32-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad609f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad60a0-0x0000000000ad60cf] usable
[    0.000000] reserve setup_data: [mem 0x0000000000ad60d0-0x000000001ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 373632320 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000011] tsc: Detected 2599.996 MHz processor
[    0.001068] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001102] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009971] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.010259] ACPI: Early table checksum verification disabled
[    0.010288] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.010300] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010313] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010319] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010323] ACPI: FACS 0x000000001FFE0000 000040
[    0.010327] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010330] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010334] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010338] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010341] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df]
[    0.010342] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb]
[    0.010343] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.010344] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f]
[    0.010345] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7]
[    0.010345] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3]
[    0.010346] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b]
[    0.010450] Zone ranges:
[    0.010450]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010452]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.010454]   Normal   empty
[    0.010454] Movable zone start for each node
[    0.010455] Early memory node ranges
[    0.010455]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010457]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.010470] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.010847] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010862] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012536] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.015113] ACPI: PM-Timer IO Port: 0x608
[    0.015128] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.015185] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.015189] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.015191] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.015193] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.015195] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.015196] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.015203] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.015204] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.015209] TSC deadline timer available
[    0.015212] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.015255] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.015256] Booting paravirtualized kernel on KVM
[    0.015265] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.015275] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.015850] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.015896] Built 1 zonelists, mobility grouping on.  Total pages: 128727
[    0.015897] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.016053] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.016092] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.016697] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.018163] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3744K rodata, 1940K init, 1828K bss, 41280K reserved, 0K cma-reserved)
[    0.018218] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.018230] Kernel/User page tables isolation: enabled
[    0.018250] ftrace: allocating 47232 entries in 185 pages
[    0.029970] ftrace: allocated 185 pages with 5 groups
[    0.030027] Dynamic Preempt: full
[    0.030457] rcu: Preemptible hierarchical RCU implementation.
[    0.030458] rcu: 	RCU event tracing is enabled.
[    0.030459] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.030460] 	All grace periods are expedited (rcu_expedited).
[    0.030460] 	Trampoline variant of Tasks RCU enabled.
[    0.030461] 	Rude variant of Tasks RCU enabled.
[    0.030461] 	Tracing variant of Tasks RCU enabled.
[    0.030462] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.030463] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.034751] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.034924] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.035032] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.035044] random: crng init done
[    0.040420] Console: colour VGA+ 80x25
[    0.153662] printk: console [ttyS0] enabled
[    0.154267] ACPI: Core revision 20220331
[    0.154954] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.156501] APIC: Switch to symmetric I/O mode setup
[    0.157567] x2apic enabled
[    0.158229] Switched APIC routing to physical x2apic.
[    0.160033] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.160960] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.162508] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.163509] pid_max: default: 32768 minimum: 301
[    0.164184] LSM: Security Framework initializing
[    0.164517] landlock: Up and running.
[    0.165933] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.166510] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.168608] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.169509] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.170387] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.170513] Spectre V2 : Mitigation: Retpolines
[    0.171159] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.171509] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.172509] RETBleed: WARNING: Spectre v2 mitigation leaves CPU vulnerable to RETBleed attacks, data leaks possible!
[    0.173509] RETBleed: Vulnerable
[    0.174509] Speculative Store Bypass: Vulnerable
[    0.175186] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.175509] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.176510] SRBDS: Unknown: Dependent on hypervisor status
[    0.196578] Freeing SMP alternatives memory: 52K
[    0.197494] smpboot: CPU0: Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.197663] cblist_init_generic: Setting adjustable number of callback queues.
[    0.198510] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.199424] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.199530] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.200420] Performance Events: unsupported p6 CPU model 94 no PMU driver, software events only.
[    0.200584] rcu: Hierarchical SRCU implementation.
[    0.201288] rcu: 	Max phase no-delay instances is 400.
[    0.201786] smp: Bringing up secondary CPUs ...
[    0.202528] x86: Booting SMP configuration:
[    0.203172] .... node  #0, CPUs:      #1 #2 #3
[    0.203912] smp: Brought up 1 node, 4 CPUs
[    0.205127] smpboot: Max logical packages: 1
[    0.205511] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.206726] devtmpfs: initialized
[    0.207570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.208520] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.209543] pinctrl core: initialized pinctrl subsystem
[    0.210692] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.211673] thermal_sys: Registered thermal governor 'step_wise'
[    0.211675] thermal_sys: Registered thermal governor 'user_space'
[    0.212554] cpuidle: using governor menu
[    0.214245] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.215514] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.216502] PCI: Using configuration type 1 for base access
[    0.219542] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.247510] raid6: avx2x4   gen() 28987 MB/s
[    0.265510] raid6: avx2x2   gen() 27436 MB/s
[    0.282509] raid6: avx2x1   gen() 25125 MB/s
[    0.283142] raid6: using algorithm avx2x4 gen() 28987 MB/s
[    0.300509] raid6: .... xor() 9602 MB/s, rmw enabled
[    0.301206] raid6: using avx2x2 recovery algorithm
[    0.301569] ACPI: Added _OSI(Module Device)
[    0.302289] ACPI: Added _OSI(Processor Device)
[    0.302519] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.303306] ACPI: Added _OSI(Processor Aggregator Device)
[    0.303519] ACPI: Added _OSI(Linux-Dell-Video)
[    0.304228] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.304513] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.307104] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.308667] ACPI: Interpreter enabled
[    0.309218] ACPI: PM: (supports S0 S3 S5)
[    0.309511] ACPI: Using IOAPIC for interrupt routing
[    0.310238] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.310511] PCI: Using E820 reservations for host bridge windows
[    0.311469] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.313237] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.313516] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.314551] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.315525] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.316556] PCI host bridge to bus 0000:00
[    0.317221] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.317511] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.318511] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.319510] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.320511] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.321511] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.322511] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.323372] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.324053] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.325513] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.328513] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.333512] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.335511] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.337160] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.339511] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.340990] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.344394] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.346993] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.350039] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.352531] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.354532] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.357542] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.358603] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.360294] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.361511] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.363098] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.366013] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.368267] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.370502] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.371358] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.373195] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.374369] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.376180] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.377403] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.377913] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.380478] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.380932] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.381764] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.385838] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.387032] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.388396] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.389962] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.392432] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.392590] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.393600] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.394525] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.395465] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.395584] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.396557] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.397454] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.397545] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.398456] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.398519] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.399422] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.399518] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.400354] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.400519] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.401334] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.402015] SCSI subsystem initialized
[    0.402571] ACPI: bus type USB registered
[    0.403174] usbcore: registered new interface driver usbfs
[    0.403523] usbcore: registered new interface driver hub
[    0.404298] usbcore: registered new device driver usb
[    0.404527] pps_core: LinuxPPS API ver. 1 registered
[    0.405244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.405514] PTP clock support registered
[    0.406542] Bluetooth: Core ver 2.22
[    0.407105] NET: Registered PF_BLUETOOTH protocol family
[    0.407511] Bluetooth: HCI device and connection manager initialized
[    0.408455] Bluetooth: HCI socket layer initialized
[    0.408511] Bluetooth: L2CAP socket layer initialized
[    0.409221] Bluetooth: SCO socket layer initialized
[    0.409560] PCI: Using ACPI for IRQ routing
[    0.469443] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.469443] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.469507] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.469526] vgaarb: loaded
[    0.469981] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.470510] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.473610] clocksource: Switched to clocksource kvm-clock
[    0.474474] pnp: PnP ACPI init
[    0.475123] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.476384] pnp: PnP ACPI: found 6 devices
[    0.483701] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.485016] NET: Registered PF_INET protocol family
[    0.485793] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.487284] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.488460] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.489556] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.490632] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.491625] TCP: Hash tables configured (established 4096 bind 4096)
[    0.492545] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.494599] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.495636] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.496730] RPC: Registered named UNIX socket transport module.
[    0.497650] RPC: Registered udp transport module.
[    0.498307] RPC: Registered tcp transport module.
[    0.498948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.499840] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.500673] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.501490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.502395] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.503328] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.504246] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.505563] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.507078] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.508540] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.509926] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.511385] PCI: CLS 0 bytes, default 64
[    0.512166] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.513400] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.515503] Initialise system trusted keyrings
[    0.516279] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.518650] NFS: Registering the id_resolver key type
[    0.519379] Key type id_resolver registered
[    0.519968] Key type id_legacy registered
[    0.520835] Key type cifs.idmap registered
[    0.530798] xor: automatically using best checksumming function   avx       
[    0.531807] Key type asymmetric registered
[    0.532351] Asymmetric key parser 'x509' registered
[    0.533015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.534045] io scheduler mq-deadline registered
[    0.534661] io scheduler kyber registered
[    0.535659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.537659] ACPI: button: Power Button [PWRF]
[    0.539006] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.541034] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.542890] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.544721] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.546331] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.547319] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.548522] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.549708] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.551863] Linux agpgart interface v0.103
[    0.552553] ACPI: bus type drm_connector registered
[    0.553351] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.554089] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.564030] Console: switching to colour dummy device 80x25
[    0.565016] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.565017] [drm] features: -context_init
[    0.567122] [drm] number of scanouts: 1
[    0.567705] [drm] number of cap sets: 0
[    0.568643] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.572532] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.588645] Console: switching to colour frame buffer device 160x50
[    0.606401] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.609394] brd: module loaded
[    0.611062] loop: module loaded
[    0.611671] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.613879] virtio_blk virtio3: [vda] 1021866 512-byte logical blocks (523 MB/499 MiB)
[    0.617587] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.618908] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.620650] scsi host0: ahci
[    0.621378] scsi host1: ahci
[    0.622076] scsi host2: ahci
[    0.622759] scsi host3: ahci
[    0.623368] scsi host4: ahci
[    0.624011] scsi host5: ahci
[    0.624520] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.625619] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.626659] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.627704] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.628770] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.629791] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.632208] e100: Intel(R) PRO/100 Network Driver
[    0.632951] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.633728] e1000: Intel(R) PRO/1000 Network Driver
[    0.634404] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.635243] e1000e: Intel(R) PRO/1000 Network Driver
[    0.635951] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.636765] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.637544] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.638344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.639262] ehci-pci: EHCI PCI platform driver
[    0.640580] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.641395] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.642639] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.650601] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.651722] hub 1-0:1.0: USB hub found
[    0.652290] hub 1-0:1.0: 6 ports detected
[    0.653047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.653961] ohci-pci: OHCI PCI platform driver
[    0.654640] uhci_hcd: USB Universal Host Controller Interface driver
[    0.656163] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.656923] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.658039] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.659096] hub 2-0:1.0: USB hub found
[    0.659664] hub 2-0:1.0: 2 ports detected
[    0.661053] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.661841] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.663176] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.664252] hub 3-0:1.0: USB hub found
[    0.664851] hub 3-0:1.0: 2 ports detected
[    0.666671] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.667492] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.668739] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.669780] hub 4-0:1.0: USB hub found
[    0.670367] hub 4-0:1.0: 2 ports detected
[    0.671272] usbcore: registered new interface driver usb-storage
[    0.672234] usbcore: registered new interface driver usbserial_generic
[    0.673228] usbserial: USB Serial support registered for generic
[    0.674317] usbcore: registered new interface driver ftdi_sio
[    0.675199] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.676244] usbcore: registered new interface driver pl2303
[    0.677080] usbserial: USB Serial support registered for pl2303
[    0.677929] i8042: PNP: No PS/2 controller found.
[    0.678690] mousedev: PS/2 mouse device common for all mice
[    0.679720] rtc_cmos 00:04: RTC can wake from S4
[    0.680987] rtc_cmos 00:04: registered as rtc0
[    0.681715] rtc_cmos 00:04: setting system clock to 2023-01-11T01:23:45 UTC (1673400225)
[    0.682922] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.684271] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.685245] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.686067] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.687402] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.688723] intel_pstate: CPU model not supported
[    0.689424] sdhci: Secure Digital Host Controller Interface driver
[    0.690295] sdhci: Copyright(c) Pierre Ossman
[    0.690925] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.691826] usbcore: registered new interface driver usbhid
[    0.692647] usbhid: USB HID core driver
[    0.693249] u32 classifier
[    0.693673]     input device check on
[    0.699181]     Actions configured
[    0.699785] NET: Registered PF_INET6 protocol family
[    0.700901] Segment Routing with IPv6
[    0.701449] In-situ OAM (IOAM) with IPv6
[    0.702050] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.702977] NET: Registered PF_PACKET protocol family
[    0.703725] Bridge firewalling registered
[    0.704320] Key type dns_resolver registered
[    0.705002] NET: Registered PF_VSOCK protocol family
[    0.706086] IPI shorthand broadcast: enabled
[    0.706750] sched_clock: Marking stable (583131831, 123578200)->(775683307, -68973276)
[    0.708006] Loading compiled-in X.509 certificates
[    0.708844] Key type ._fscrypt registered
[    0.709438] Key type .fscrypt registered
[    0.709958] Key type fscrypt-provisioning registered
[    0.710900] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.712594] Key type encrypted registered
[    0.715213] printk: console [netcon0] enabled
[    0.715866] netconsole: network logging started
[    0.895567] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.940247] ata1: SATA link down (SStatus 0 SControl 300)
[    0.941172] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.942142] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.942946] ata3.00: applying bridge limits
[    0.943626] ata3.00: configured for UDMA/100
[    0.944383] ata5: SATA link down (SStatus 0 SControl 300)
[    0.945307] ata4: SATA link down (SStatus 0 SControl 300)
[    0.946318] ata6: SATA link down (SStatus 0 SControl 300)
[    0.947236] ata2: SATA link down (SStatus 0 SControl 300)
[    0.952710] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.987792] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.988809] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.019559] IP-Config: Complete:
[    1.020038]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    1.021423]      host=192.168.7.10, domain=, nis-domain=(none)
[    1.022160]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.022175]      nameserver0=8.8.8.8
[    1.023986] md: Waiting for all devices to be available before autodetect
[    1.024674] md: If you don't use raid, use raid=noautodetect
[    1.025198] md: Autodetecting RAID arrays.
[    1.025608] md: autorun ...
[    1.025860] md: ... autorun DONE.
[    1.027556] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.028642] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.029205] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.029446] devtmpfs: mounted
[    1.030696] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.033141] Freeing unused kernel image (initmem) memory: 1940K
[    1.040592] Write protecting the kernel read-only data: 22528k
[    1.042786] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.043708] Freeing unused kernel image (rodata/data gap) memory: 352K
[    1.044447] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.103883] udevd[173]: starting version 3.2.11
[    1.108543] udevd[174]: starting eudev-3.2.11
[    1.147539] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.281194] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.333869] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.396919] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-libglib-2.0-0...
Running postinst /etc/rpm-postinsts/101-gconf...
Running postinst /etc/rpm-postinsts/102-liberation-fonts...
FC_DEBUG=1
Font directories:
	/.local/share/fonts
	/usr/local/share/fonts
	/usr/share/fonts
	/.fonts
	/usr/share/fonts/ttf
/.local/share/fonts: skipping, no such directory
/usr/local/share/fonts: skipping, no such directory
/usr/share/fonts: skipping, existing cache is valid: 0 fonts, 1 dirs
/usr/share/fonts/ttf: skipping, existing cache is valid: 12 fonts, 0 dirs
/.fonts: skipping, no such directory
/usr/share/fonts/ttf: skipping, looped directory detected
/var/cache/fontconfig: cleaning cache directory
/.cache/fontconfig: not cleaning non-existent cache directory
/.fontconfig: not cleaning non-existent cache directory
fc-cache: succeeded
Running postinst /etc/rpm-postinsts/103-libgdk-pixbuf-2.0-loader-gif...
[    1.661580] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Running postinst /etc/rpm-postinsts/104-libgdk-pixbuf-2.0-loader-xpm...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 11 01:23:46 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
MESA-LOADER: failed to open kms_swrast: /usr/lib/dri/kms_swrast_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
failed to load driver: kms_swrast
MESA-LOADER: failed to open swrast: /usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
failed to load swrast driver
couldn't get display device
D-BUS per-session daemon address is: unix:path=/tmp/dbus-M14CkbEfeJ,guid=4c3014ca2b0503b221b13d5163be0fa2
Using calibration data stored in /etc/pointercal.xinput
[settings daemon] Forking. run with -n to prevent fork
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

dbus-daemon[620]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=618 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[620]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCc3/+ONjcDbMeT5dfTwb5dc7LlG0BkY7+GwWDyDzch7hrHwlIBXr1TXedriNBAyBGCKeOQ1NpdpSfO1K1/POo8trsZWJhsPxuODjGh/Q3y9tm1DMLbHy1b5jBNqK07sC4k3uck5e0RFqpcoCAk1tltFp05n2F0O8jBVoPjlkrcMMgutucfxfMGP54aEL8SfUg488UAXXJD4EzpkqQrX7yHgP73KGSHASrvdbBB2UgvmIRtkGiKLQSz+kkrWfLzdcEjP1AMu2TlP026768Bl2cJNOGWZsr1gM0f26JcMFRSXfMYNkykn66C2BmpIqwXEro363oLhydzomkPSmiPte/t root@qemux86-64
Fingerprint: SHA256:bRaLEqXuC3s7ImgMWVggBLoOBSOUbWd0ZNovUP7BO/o
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    2.238865] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.239449] Bluetooth: BNEP filters: protocol multicast
[    2.240008] Bluetooth: BNEP socket layer initialized
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 