[    0.000000] Linux version 5.15.78-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Nov 16 14:15:49 UTC 2022
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720484K/786428K available (12644K kernel code, 1900K rwdata, 2860K rodata, 432K init, 350K bss, 65944K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.54 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11460328213 ns
[    0.000142] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12876773373ns
[    0.015371] Console: colour dummy device 80x25
[    0.016111] printk: console [tty0] enabled
[    0.017112] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.15.78-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Nov 16 14:15:49 UTC 2022
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720484K/786428K available (12644K kernel code, 1900K rwdata, 2860K rodata, 432K init, 350K bss, 65944K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.54 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11460328213 ns
[    0.000142] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12876773373ns
[    0.015371] Console: colour dummy device 80x25
[    0.016111] printk: console [tty0] enabled
[    0.017112] printk: bootconsole [uart8250] disabled
[    0.019581] Calibrating delay loop... 898.66 BogoMIPS (lpj=4493312)
[    0.167154] pid_max: default: 32768 minimum: 301
[    0.168582] LSM: Security Framework initializing
[    0.170131] landlock: Up and running.
[    0.173848] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.174079] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.224687] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.226276] rcu: Hierarchical SRCU implementation.
[    0.235333] smp: Bringing up secondary CPUs ...
[    0.235518] smp: Brought up 1 node, 1 CPU
[    0.257077] devtmpfs: initialized
[    0.269311] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.269623] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.283456] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.553253] raid6: int64x8  gen()   367 MB/s
[    0.727424] raid6: int64x8  xor()   307 MB/s
[    0.902438] raid6: int64x4  gen()   844 MB/s
[    1.073611] raid6: int64x4  xor()   429 MB/s
[    1.249161] raid6: int64x2  gen()  1069 MB/s
[    1.425100] raid6: int64x2  xor()   572 MB/s
[    1.596631] raid6: int64x1  gen()   735 MB/s
[    1.770688] raid6: int64x1  xor()   457 MB/s
[    1.770946] raid6: using algorithm int64x2 gen() 1069 MB/s
[    1.771061] raid6: .... xor() 572 MB/s, rmw enabled
[    1.771302] raid6: using intx1 recovery algorithm
[    1.779754] vgaarb: loaded
[    1.781907] SCSI subsystem initialized
[    1.782880] usbcore: registered new interface driver usbfs
[    1.783384] usbcore: registered new interface driver hub
[    1.783731] usbcore: registered new device driver usb
[    1.784328] pps_core: LinuxPPS API ver. 1 registered
[    1.784409] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.784671] PTP clock support registered
[    1.802104] PCI host bridge to bus 0000:00
[    1.802611] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.803905] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.804167] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.806376] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.807502] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.807658] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.807773] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.807872] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.808023] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.811377] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.812402] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.812785] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.813025] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.813127] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.813287] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.813391] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.813968] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.814120] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.815278] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.815930] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.816139] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.816930] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.817054] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.817253] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.817367] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.818286] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.818820] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.818970] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.819230] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.819416] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.819959] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.820094] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.820263] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.820941] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.821281] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.821404] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.822412] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.824346] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.824783] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.824977] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.825248] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.825458] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.825597] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.825742] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.825880] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.826021] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.826105] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.826231] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.826322] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.829647] clocksource: Switched to clocksource MIPS
[    2.077547] NET: Registered PF_INET protocol family
[    2.089391] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.115190] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    2.115428] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.115714] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.116099] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.116478] TCP: Hash tables configured (established 8192 bind 8192)
[    2.118141] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.118583] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.121604] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.134442] RPC: Registered named UNIX socket transport module.
[    2.134571] RPC: Registered udp transport module.
[    2.134639] RPC: Registered tcp transport module.
[    2.134704] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.136252] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.137533] PCI: CLS 0 bytes, default 32
[    2.685906] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    2.712805] NFS: Registering the id_resolver key type
[    2.715273] Key type id_resolver registered
[    2.715398] Key type id_legacy registered
[    2.719559] Key type cifs.idmap registered
[    2.767455] xor: measuring software checksum speed
[    2.775938]    8regs           :  1252 MB/sec
[    2.784600]    8regs_prefetch  :  1233 MB/sec
[    2.793045]    32regs          :  1236 MB/sec
[    2.802335]    32regs_prefetch :  1163 MB/sec
[    2.802450] xor: using function: 8regs (1252 MB/sec)
[    2.803092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.803376] io scheduler mq-deadline registered
[    2.803571] io scheduler kyber registered
[    2.811148] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.815485] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.817078] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.820376] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.828246] printk: console [ttyS0] disabled
[    2.854329] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.854539] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.890038] printk: console [ttyS0] enabled
[    2.918949] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.919475] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.920174] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.930189] random: crng init done
[    2.932529] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.933737] [drm] Found bochs VGA, ID 0xb0c5.
[    2.934020] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.938587] [drm] Found EDID data blob.
[    2.945863] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    3.013459] Console: switching to colour frame buffer device 128x48
[    3.047938] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    3.091247] brd: module loaded
[    3.102117] virtio_blk virtio2: [vda] 4748498 512-byte logical blocks (2.43 GB/2.26 GiB)
[    3.130743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.134215] ehci-pci: EHCI PCI platform driver
[    3.135020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.135703] ohci-pci: OHCI PCI platform driver
[    3.141025] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.142502] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.153389] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    3.158005] usbcore: registered new interface driver usbhid
[    3.158597] usbhid: USB HID core driver
[    3.159893] u32 classifier
[    3.160261]     input device check on
[    3.160673]     Actions configured
[    3.163655] NET: Registered PF_INET6 protocol family
[    3.178521] Segment Routing with IPv6
[    3.179703] In-situ OAM (IOAM) with IPv6
[    3.181061] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.185518] NET: Registered PF_PACKET protocol family
[    3.187072] Bridge firewalling registered
[    3.188952] Key type dns_resolver registered
[    3.190273] NET: Registered PF_VSOCK protocol family
[    3.206289] Key type .fscrypt registered
[    3.215456] Key type fscrypt-provisioning registered
[    3.235430] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.255159] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.292123] Key type encrypted registered
[    3.311626] printk: console [netcon0] enabled
[    3.319236] netconsole: network logging started
[    3.911600] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.979761] IP-Config: Complete:
[    3.989349]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    3.996583]      host=192.168.7.6, domain=, nis-domain=(none)
[    4.006120]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.006229]      nameserver0=8.8.8.8
[    4.040373] md: Waiting for all devices to be available before autodetect
[    4.054093] md: If you don't use raid, use raid=noautodetect
[    4.060853] md: Autodetecting RAID arrays.
[    4.066665] md: autorun ...
[    4.075930] md: ... autorun DONE.
[    4.131342] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.149626] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    4.164815] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.194381] devtmpfs: mounted
[    4.241497] Freeing unused kernel image (initmem) memory: 432K
[    4.249159] This architecture does not have kernel memory protection.
[    4.255697] Run /sbin/init as init process
[    4.304716] process '/sbin/init.sysvinit' started with executable stack
[    7.715210] udevd[118]: starting version 3.2.10
[    7.855994] udevd[119]: starting eudev-3.2.10
[   35.223287] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error

Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.15.78-yocto-standard #1 SMP PREEMPT Wed Nov 16 14:15:49 UTC 2022 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 13 15:47:32 2023
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-hD5DApsgi5,guid=93ee3f571a422a33bff951f263c17d1b
[A[122G[ ok ]
Starting Telephony daemon
Using calibration data stored in /etc/pointercal.xinput
No makedumpfile found.
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.0.6 qemumips64 ttyS0

qemumips64 login: [ 2487.268555] hellomod: loading out-of-tree module taints kernel.
[ 2487.285350] Hello world!
[ 2489.896631] Cleaning up hellomod.
