[ 0.000000] Linux version 5.19.17-rt10-yocto-preempt-rt (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_RT Mon Jan 2 02:58:07 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000a855df] usable [ 0.000000] reserve setup_data: [mem 0x0000000000a855e0-0x0000000000a8560f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000a85610-0x000000000ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 343962810 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2599.996 MHz processor [ 0.000958] last_pfn = 0xffd8 max_arch_pfn = 0x400000000 [ 0.001006] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008352] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.008535] ACPI: Early table checksum verification disabled [ 0.008545] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.008550] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008558] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008567] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008570] ACPI: FACS 0x000000000FFE0000 000040 [ 0.008590] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008593] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008596] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008599] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008601] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df] [ 0.008602] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb] [ 0.008603] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f] [ 0.008604] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f] [ 0.008604] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7] [ 0.008605] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3] [ 0.008605] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b] [ 0.008654] Zone ranges: [ 0.008654] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008656] DMA32 [mem 0x0000000001000000-0x000000000ffd7fff] [ 0.008657] Normal empty [ 0.008658] Movable zone start for each node [ 0.008658] Early memory node ranges [ 0.008658] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.008660] node 0: [mem 0x0000000000100000-0x000000000ffd7fff] [ 0.008661] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff] [ 0.009125] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009139] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.009825] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.010271] ACPI: PM-Timer IO Port: 0x608 [ 0.010279] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.010312] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.010315] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.010316] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.010317] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.010321] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.010322] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.010326] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.010327] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.010330] TSC deadline timer available [ 0.010331] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.010353] [mem 0x10000000-0xafffffff] available for PCI devices [ 0.010354] Booting paravirtualized kernel on KVM [ 0.010355] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.010358] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.010997] percpu: Embedded 53 pages/cpu s177344 r8192 d31552 u524288 [ 0.011026] Built 1 zonelists, mobility grouping on. Total pages: 64215 [ 0.011028] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.011120] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.011144] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.011216] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.012107] Memory: 224532K/261592K available (16394K kernel code, 2101K rwdata, 4524K rodata, 1876K init, 2012K bss, 36800K reserved, 0K cma-reserved) [ 0.012165] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.012173] Kernel/User page tables isolation: enabled [ 0.012186] ftrace: allocating 43835 entries in 172 pages [ 0.021353] ftrace: allocated 172 pages with 4 groups [ 0.021907] rcu: Preemptible hierarchical RCU implementation. [ 0.021908] rcu: RCU event tracing is enabled. [ 0.021909] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.021910] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.021910] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.021911] No expedited grace period (rcu_normal_after_boot). [ 0.021911] Trampoline variant of Tasks RCU enabled. [ 0.021912] Rude variant of Tasks RCU enabled. [ 0.021913] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.021914] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.026672] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.026846] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.026864] random: crng init done [ 0.032626] Console: colour VGA+ 80x25 [ 0.164079] printk: console [ttyS0] enabled [ 0.164107] ACPI: Core revision 20220331 [ 0.164282] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.164383] APIC: Switch to symmetric I/O mode setup [ 0.164655] x2apic enabled [ 0.164918] Switched APIC routing to physical x2apic. [ 0.166028] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.166053] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.166056] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.166058] pid_max: default: 32768 minimum: 301 [ 0.166077] LSM: Security Framework initializing [ 0.166100] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.166102] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.167301] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.167302] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.167304] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.167306] Spectre V2 : Mitigation: Retpolines [ 0.167307] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.167307] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.167308] Speculative Store Bypass: Vulnerable [ 0.167310] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.167311] MMIO Stale Data: Unknown: No mitigations [ 0.167312] SRBDS: Unknown: Dependent on hypervisor status [ 0.183486] Freeing SMP alternatives memory: 44K [ 0.183645] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.209328] cblist_init_generic: Setting adjustable number of callback queues. [ 0.209330] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.211594] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.212618] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.214196] rcu: Hierarchical SRCU implementation. [ 0.214197] rcu: Max phase no-delay instances is 400. [ 0.214217] printk: console [ttyS0] printing thread started [ 0.217101] smp: Bringing up secondary CPUs ... [ 0.217260] x86: Booting SMP configuration: [ 0.217260] .... node #0, CPUs: #1 #2 #3 [ 0.219858] smp: Brought up 1 node, 4 CPUs [ 0.219858] smpboot: Max logical packages: 1 [ 0.219858] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.223492] devtmpfs: initialized [ 0.223492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.223492] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.223492] pinctrl core: initialized pinctrl subsystem [ 0.228412] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.228589] thermal_sys: Registered thermal governor 'step_wise' [ 0.228590] thermal_sys: Registered thermal governor 'user_space' [ 0.230108] cpuidle: using governor menu [ 0.230301] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.230305] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.230319] PCI: Using configuration type 1 for base access [ 0.233092] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.251053] raid6: sse2x4 gen() 15520 MB/s [ 0.267200] raid6: sse2x2 gen() 15854 MB/s [ 0.284569] raid6: sse2x1 gen() 12073 MB/s [ 0.284571] raid6: using algorithm sse2x2 gen() 15854 MB/s [ 0.301575] raid6: .... xor() 10352 MB/s, rmw enabled [ 0.301577] raid6: using ssse3x2 recovery algorithm [ 0.302825] ACPI: Added _OSI(Module Device) [ 0.302825] ACPI: Added _OSI(Processor Device) [ 0.302825] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.302825] ACPI: Added _OSI(Processor Aggregator Device) [ 0.302825] ACPI: Added _OSI(Linux-Dell-Video) [ 0.302825] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.302825] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.303925] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.309111] ACPI: Interpreter enabled [ 0.309126] ACPI: PM: (supports S0 S3 S5) [ 0.309127] ACPI: Using IOAPIC for interrupt routing [ 0.309154] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.309155] PCI: Using E820 reservations for host bridge windows [ 0.309265] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.311796] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.311802] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.311857] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.311942] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.311988] PCI host bridge to bus 0000:00 [ 0.311989] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.311990] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.311992] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.311993] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window] [ 0.311995] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.311996] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.311997] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.312066] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.312822] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.313828] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.314861] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.318524] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.319059] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.320059] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.321059] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.321990] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.324943] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.326973] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.328572] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.330685] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.331615] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.333603] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.333728] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.334693] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.336645] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.337659] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.340738] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.343104] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.345624] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.346530] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.348260] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.349224] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.351059] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.352075] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.352536] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.356337] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.356954] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.357295] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.360019] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.360401] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.361541] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.363446] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.365263] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.365356] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.365472] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.365575] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.365675] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.365756] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.365843] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.365928] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.365964] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.365974] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.365984] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.365993] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.366002] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.366011] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.366020] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.366030] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.366652] SCSI subsystem initialized [ 0.366670] ACPI: bus type USB registered [ 0.366670] usbcore: registered new interface driver usbfs [ 0.366670] usbcore: registered new interface driver hub [ 0.366670] usbcore: registered new device driver usb [ 0.366670] pps_core: LinuxPPS API ver. 1 registered [ 0.366670] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.366670] PTP clock support registered [ 0.367253] Bluetooth: Core ver 2.22 [ 0.367261] NET: Registered PF_BLUETOOTH protocol family [ 0.367261] Bluetooth: HCI device and connection manager initialized [ 0.367267] Bluetooth: HCI socket layer initialized [ 0.367269] Bluetooth: L2CAP socket layer initialized [ 0.367273] Bluetooth: SCO socket layer initialized [ 0.367304] PCI: Using ACPI for IRQ routing [ 0.454287] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.454287] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.454287] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.454287] vgaarb: loaded [ 0.454287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.454287] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.456172] clocksource: Switched to clocksource kvm-clock [ 0.456319] pnp: PnP ACPI init [ 0.456528] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.456839] pnp: PnP ACPI: found 6 devices [ 0.463177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.463215] NET: Registered PF_INET protocol family [ 0.463264] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.463534] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 0.463540] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.463542] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.463551] TCP bind hash table entries: 2048 (order: 4, 81920 bytes, linear) [ 0.463565] TCP: Hash tables configured (established 2048 bind 2048) [ 0.463604] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 0.463612] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 0.464102] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.464275] RPC: Registered named UNIX socket transport module. [ 0.464277] RPC: Registered udp transport module. [ 0.464278] RPC: Registered tcp transport module. [ 0.464278] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.464286] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.464289] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.464290] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.464291] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window] [ 0.464293] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.464294] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.464786] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.465977] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.467654] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.468765] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.469718] PCI: CLS 0 bytes, default 64 [ 0.469909] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.469919] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.473095] Initialise system trusted keyrings [ 0.473146] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.475621] NFS: Registering the id_resolver key type [ 0.475629] Key type id_resolver registered [ 0.475629] Key type id_legacy registered [ 0.484688] xor: automatically using best checksumming function avx [ 0.484690] Key type asymmetric registered [ 0.484695] Asymmetric key parser 'x509' registered [ 0.484706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.484710] io scheduler mq-deadline registered [ 0.484711] io scheduler kyber registered [ 0.485241] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.486265] ACPI: button: Power Button [PWRF] [ 0.486993] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.488714] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.490448] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.492197] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.493424] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.493594] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.493805] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.494074] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.496355] Linux agpgart interface v0.103 [ 0.496448] ACPI: bus type drm_connector registered [ 0.496580] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.496586] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.505632] Console: switching to colour dummy device 80x25 [ 0.505784] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.505785] [drm] features: -context_init [ 0.506916] [drm] number of scanouts: 1 [ 0.506927] [drm] number of cap sets: 0 [ 0.507247] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.510675] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.513433] Console: switching to colour frame buffer device 160x50 [ 0.529744] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.540921] brd: module loaded [ 0.542419] loop: module loaded [ 0.545309] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.547558] virtio_blk virtio3: [vda] 273968 512-byte logical blocks (140 MB/134 MiB) [ 0.550032] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.550035] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.551602] scsi host0: ahci [ 0.551776] scsi host1: ahci [ 0.551925] scsi host2: ahci [ 0.552076] scsi host3: ahci [ 0.552208] scsi host4: ahci [ 0.552358] scsi host5: ahci [ 0.552421] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.552436] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.552442] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.552448] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.552453] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.552464] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.554325] e100: Intel(R) PRO/100 Network Driver [ 0.554326] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.554340] e1000: Intel(R) PRO/1000 Network Driver [ 0.554341] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.554354] e1000e: Intel(R) PRO/1000 Network Driver [ 0.554355] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.554367] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.554368] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.554381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.554383] ehci-pci: EHCI PCI platform driver [ 0.555152] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.555161] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.555951] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.562214] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.562412] hub 1-0:1.0: USB hub found [ 0.562418] hub 1-0:1.0: 6 ports detected [ 0.562694] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.562700] ohci-pci: OHCI PCI platform driver [ 0.562708] uhci_hcd: USB Universal Host Controller Interface driver [ 0.563418] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.563425] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.563697] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.563941] hub 2-0:1.0: USB hub found [ 0.563947] hub 2-0:1.0: 2 ports detected [ 0.564832] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.564838] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.565107] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.565306] hub 3-0:1.0: USB hub found [ 0.565311] hub 3-0:1.0: 2 ports detected [ 0.566270] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.566278] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.566517] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.566700] hub 4-0:1.0: USB hub found [ 0.566705] hub 4-0:1.0: 2 ports detected [ 0.566895] usbcore: registered new interface driver usb-storage [ 0.566919] usbcore: registered new interface driver usbserial_generic [ 0.566923] usbserial: USB Serial support registered for generic [ 0.566930] usbcore: registered new interface driver ftdi_sio [ 0.566934] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.566953] usbcore: registered new interface driver pl2303 [ 0.566956] usbserial: USB Serial support registered for pl2303 [ 0.566980] i8042: PNP: No PS/2 controller found. [ 0.567069] mousedev: PS/2 mouse device common for all mice [ 0.567258] rtc_cmos 00:04: RTC can wake from S4 [ 0.567932] rtc_cmos 00:04: registered as rtc0 [ 0.568029] rtc_cmos 00:04: setting system clock to 2023-01-13T22:49:43 UTC (1673650183) [ 0.568051] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.568684] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.568962] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.568964] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.569418] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.569519] intel_pstate: CPU model not supported [ 0.569535] sdhci: Secure Digital Host Controller Interface driver [ 0.569536] sdhci: Copyright(c) Pierre Ossman [ 0.569554] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.569597] usbcore: registered new interface driver usbhid [ 0.569598] usbhid: USB HID core driver [ 0.569620] u32 classifier [ 0.569621] input device check on [ 0.569621] Actions configured [ 0.569781] NET: Registered PF_INET6 protocol family [ 0.570166] Segment Routing with IPv6 [ 0.570172] In-situ OAM (IOAM) with IPv6 [ 0.570189] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.570311] NET: Registered PF_PACKET protocol family [ 0.570340] Key type dns_resolver registered [ 0.570400] NET: Registered PF_VSOCK protocol family [ 0.571064] IPI shorthand broadcast: enabled [ 0.571085] sched_clock: Marking stable (432856586, 138201543)->(588403080, -17344951) [ 0.571215] registered taskstats version 1 [ 0.571224] Loading compiled-in X.509 certificates [ 0.571287] Key type ._fscrypt registered [ 0.571288] Key type .fscrypt registered [ 0.571288] Key type fscrypt-provisioning registered [ 0.571644] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.572084] Key type encrypted registered [ 0.574149] printk: console [netcon0] printing thread started [ 0.574155] printk: console [netcon0] enabled [ 0.574156] netconsole: network logging started [ 0.806110] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.860596] ata1: SATA link down (SStatus 0 SControl 300) [ 0.860753] ata4: SATA link down (SStatus 0 SControl 300) [ 0.860893] ata6: SATA link down (SStatus 0 SControl 300) [ 0.861034] ata5: SATA link down (SStatus 0 SControl 300) [ 0.861494] ata2: SATA link down (SStatus 0 SControl 300) [ 0.861700] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.861790] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.861793] ata3.00: applying bridge limits [ 0.861904] ata3.00: configured for UDMA/100 [ 0.862264] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.900409] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.900412] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.934147] IP-Config: Complete: [ 0.934148] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 0.934151] host=192.168.7.4, domain=, nis-domain=(none) [ 0.934152] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.934153] nameserver0=8.8.8.8 [ 0.934700] md: Waiting for all devices to be available before autodetect [ 0.934702] md: If you don't use raid, use raid=noautodetect [ 0.934703] md: Autodetecting RAID arrays. [ 0.934703] md: autorun ... [ 0.934704] md: ... autorun DONE. [ 0.936007] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 0.936023] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.936210] devtmpfs: mounted [ 0.937561] Freeing unused kernel image (initmem) memory: 1876K [ 0.938950] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 0.939089] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 0.944102] Write protecting the kernel read-only data: 24576k [ 0.945114] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 0.945671] Freeing unused kernel image (rodata/data gap) memory: 1620K [ 0.945749] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.013134] udevd[200]: starting version 3.2.11 [ 1.017340] udevd[201]: starting eudev-3.2.11 [ 1.055138] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.188880] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.240328] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.324778] EXT4-fs (vda): re-mounted. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... [ 1.604140] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting rpcbind daemon...done. starting statd: done Starting atd: OK [ 2.523681] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). starting 8 nfsd kernel threads: [ 3.572495] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 3.572655] NFSD: Using legacy client tracking operations. done [ 3.572656] NFSD: starting 90-second grace period (net f0000000) starting mountd: done Starting system log daemon...0 Starting crond: OK Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0 qemux86-64 login: