[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000001ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 555308363 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000008] tsc: Detected 2599.996 MHz processor [ 0.001024] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001060] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009640] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.009940] ACPI: Early table checksum verification disabled [ 0.009962] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.009973] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009987] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009995] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010001] ACPI: FACS 0x000000001FFE0000 000040 [ 0.010006] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010011] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010017] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010022] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010026] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df] [ 0.010029] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb] [ 0.010031] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.010032] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f] [ 0.010034] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7] [ 0.010035] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3] [ 0.010037] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b] [ 0.010119] Zone ranges: [ 0.010120] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010124] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.010126] Normal empty [ 0.010128] Movable zone start for each node [ 0.010129] Early memory node ranges [ 0.010129] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010132] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.010134] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.010652] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010680] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.012823] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.013425] ACPI: PM-Timer IO Port: 0x608 [ 0.013445] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.013502] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.013508] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.013511] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.013513] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.013515] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.013517] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.013523] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.013525] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.013531] TSC deadline timer available [ 0.013533] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.013587] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.013589] Booting paravirtualized kernel on KVM [ 0.013592] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.013600] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.014263] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.014318] Built 1 zonelists, mobility grouping on. Total pages: 128727 [ 0.014321] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.014502] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.014556] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.015220] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.017341] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved) [ 0.017519] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.017531] Kernel/User page tables isolation: enabled [ 0.017551] ftrace: allocating 47075 entries in 184 pages [ 0.029733] ftrace: allocated 184 pages with 4 groups [ 0.029845] Dynamic Preempt: full [ 0.030376] rcu: Preemptible hierarchical RCU implementation. [ 0.030377] rcu: RCU event tracing is enabled. [ 0.030378] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.030380] All grace periods are expedited (rcu_expedited). [ 0.030381] Trampoline variant of Tasks RCU enabled. [ 0.030382] Rude variant of Tasks RCU enabled. [ 0.030383] Tracing variant of Tasks RCU enabled. [ 0.030384] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.030385] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.037175] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.037398] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.037530] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.037549] random: crng init done [ 0.045936] Console: colour VGA+ 80x25 [ 0.242395] printk: console [ttyS0] enabled [ 0.243328] ACPI: Core revision 20220331 [ 0.244425] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.246480] APIC: Switch to symmetric I/O mode setup [ 0.248099] x2apic enabled [ 0.249181] Switched APIC routing to physical x2apic. [ 0.252059] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.254097] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.256565] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.257570] pid_max: default: 32768 minimum: 301 [ 0.258612] LSM: Security Framework initializing [ 0.259586] landlock: Up and running. [ 0.261568] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.262571] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.264013] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.264570] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.265569] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.266569] Spectre V2 : Mitigation: Retpolines [ 0.267567] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.268567] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.269568] Speculative Store Bypass: Vulnerable [ 0.270569] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.271567] MMIO Stale Data: Unknown: No mitigations [ 0.272567] SRBDS: Unknown: Dependent on hypervisor status [ 0.285411] Freeing SMP alternatives memory: 52K [ 0.285992] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.286814] cblist_init_generic: Setting adjustable number of callback queues. [ 0.287570] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.288620] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.289657] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.290619] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.291639] rcu: Hierarchical SRCU implementation. [ 0.292499] rcu: Max phase no-delay instances is 400. [ 0.292952] smp: Bringing up secondary CPUs ... [ 0.293755] x86: Booting SMP configuration: [ 0.294516] .... node #0, CPUs: #1 #2 #3 [ 0.296609] smp: Brought up 1 node, 4 CPUs [ 0.297570] smpboot: Max logical packages: 1 [ 0.298333] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.298932] devtmpfs: initialized [ 0.299784] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.300576] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.301633] pinctrl core: initialized pinctrl subsystem [ 0.303528] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.303781] thermal_sys: Registered thermal governor 'step_wise' [ 0.303784] thermal_sys: Registered thermal governor 'user_space' [ 0.304639] cpuidle: using governor menu [ 0.306514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.307572] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.308592] PCI: Using configuration type 1 for base access [ 0.312624] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.351571] raid6: sse2x4 gen() 8500 MB/s [ 0.368569] raid6: sse2x2 gen() 8673 MB/s [ 0.386569] raid6: sse2x1 gen() 6492 MB/s [ 0.387367] raid6: using algorithm sse2x2 gen() 8673 MB/s [ 0.404570] raid6: .... xor() 5570 MB/s, rmw enabled [ 0.405534] raid6: using ssse3x2 recovery algorithm [ 0.405680] ACPI: Added _OSI(Module Device) [ 0.406385] ACPI: Added _OSI(Processor Device) [ 0.406569] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.407375] ACPI: Added _OSI(Processor Aggregator Device) [ 0.407570] ACPI: Added _OSI(Linux-Dell-Video) [ 0.408324] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.408568] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.410895] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.412857] ACPI: Interpreter enabled [ 0.413542] ACPI: PM: (supports S0 S3 S5) [ 0.413569] ACPI: Using IOAPIC for interrupt routing [ 0.414468] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414569] PCI: Using E820 reservations for host bridge windows [ 0.415718] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.419472] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.419576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.420640] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.421683] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.422656] PCI host bridge to bus 0000:00 [ 0.423367] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.423570] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.424570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.425570] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.426569] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.427570] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.428569] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.429619] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.431335] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.433570] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.436569] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.444445] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.445571] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.447488] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.449379] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.451500] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.454579] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.457539] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.459520] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.463359] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.464608] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.468606] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.469761] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.471613] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.474467] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.475574] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.480474] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.483192] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.486573] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.489947] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.493398] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.494895] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.498495] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.500321] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.501546] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.507640] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.509127] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.509912] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.515576] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.517572] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.520082] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.523505] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.525241] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.525685] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.526667] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.527786] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.528694] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.529694] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.530691] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.531693] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.532627] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.533593] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.534587] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.535586] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.536587] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.537586] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.538586] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.539633] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.541557] SCSI subsystem initialized [ 0.541673] ACPI: bus type USB registered [ 0.542635] usbcore: registered new interface driver usbfs [ 0.543621] usbcore: registered new interface driver hub [ 0.544589] usbcore: registered new device driver usb [ 0.545615] pps_core: LinuxPPS API ver. 1 registered [ 0.546486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.546589] PTP clock support registered [ 0.548091] Bluetooth: Core ver 2.22 [ 0.548592] NET: Registered PF_BLUETOOTH protocol family [ 0.549425] Bluetooth: HCI device and connection manager initialized [ 0.549587] Bluetooth: HCI socket layer initialized [ 0.550426] Bluetooth: L2CAP socket layer initialized [ 0.550582] Bluetooth: SCO socket layer initialized [ 0.551617] PCI: Using ACPI for IRQ routing [ 0.630635] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.631564] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.631564] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.631584] vgaarb: loaded [ 0.632165] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.632569] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.637730] clocksource: Switched to clocksource kvm-clock [ 0.638992] pnp: PnP ACPI init [ 0.639881] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.641598] pnp: PnP ACPI: found 6 devices [ 0.665386] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.667057] NET: Registered PF_INET protocol family [ 0.667997] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.670022] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.671543] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.672908] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.674314] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.675583] TCP: Hash tables configured (established 4096 bind 4096) [ 0.676832] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.678014] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.679372] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.681238] RPC: Registered named UNIX socket transport module. [ 0.682370] RPC: Registered udp transport module. [ 0.683228] RPC: Registered tcp transport module. [ 0.684086] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.685198] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.686308] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.687435] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.689166] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.690272] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.691400] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.693100] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.705668] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 12668 usecs [ 0.707398] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.709490] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.711478] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.713403] PCI: CLS 0 bytes, default 64 [ 0.725118] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.726775] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.730646] Initialise system trusted keyrings [ 0.733409] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.737321] NFS: Registering the id_resolver key type [ 0.738294] Key type id_resolver registered [ 0.739012] Key type id_legacy registered [ 0.740754] Key type cifs.idmap registered [ 0.751039] xor: automatically using best checksumming function avx [ 0.770156] Key type asymmetric registered [ 0.770930] Asymmetric key parser 'x509' registered [ 0.771864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.773181] io scheduler mq-deadline registered [ 0.774010] io scheduler kyber registered [ 0.775515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.777706] ACPI: button: Power Button [PWRF] [ 0.779679] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.782587] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.785330] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.787983] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.791160] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.792464] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.794296] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.795947] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.806792] Linux agpgart interface v0.103 [ 0.807713] ACPI: bus type drm_connector registered [ 0.808781] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.809742] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.850775] Console: switching to colour dummy device 80x25 [ 0.852174] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.852177] [drm] features: -context_init [ 0.855139] [drm] number of scanouts: 1 [ 0.855881] [drm] number of cap sets: 0 [ 0.857366] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.864763] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.923331] Console: switching to colour frame buffer device 160x50 [ 1.411679] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.424529] brd: module loaded [ 1.438779] loop: module loaded [ 1.439608] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.442789] virtio_blk virtio3: [vda] 1090330 512-byte logical blocks (558 MB/532 MiB) [ 1.457833] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.459307] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.462439] scsi host0: ahci [ 1.463641] scsi host1: ahci [ 1.464605] scsi host2: ahci [ 1.465513] scsi host3: ahci [ 1.466469] scsi host4: ahci [ 1.467422] scsi host5: ahci [ 1.468089] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.469457] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.470808] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.477235] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.478583] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.479884] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.538024] e100: Intel(R) PRO/100 Network Driver [ 1.538775] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.539528] e1000: Intel(R) PRO/1000 Network Driver [ 1.540223] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.541274] e1000e: Intel(R) PRO/1000 Network Driver [ 1.542179] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.543500] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.544488] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.545579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.546886] ehci-pci: EHCI PCI platform driver [ 1.548946] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.550448] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.552091] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.559730] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.568169] hub 1-0:1.0: USB hub found [ 1.569038] hub 1-0:1.0: 6 ports detected [ 1.570152] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.571270] ohci-pci: OHCI PCI platform driver [ 1.572074] uhci_hcd: USB Universal Host Controller Interface driver [ 1.574146] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.575115] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.576639] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.578523] hub 2-0:1.0: USB hub found [ 1.579243] hub 2-0:1.0: 2 ports detected [ 1.581116] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.582036] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.583575] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.585308] hub 3-0:1.0: USB hub found [ 1.586044] hub 3-0:1.0: 2 ports detected [ 1.588048] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.589157] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.590955] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.592845] hub 4-0:1.0: USB hub found [ 1.593619] hub 4-0:1.0: 2 ports detected [ 1.594674] usbcore: registered new interface driver usb-storage [ 1.595779] usbcore: registered new interface driver usbserial_generic [ 1.597058] usbserial: USB Serial support registered for generic [ 1.598094] usbcore: registered new interface driver ftdi_sio [ 1.599114] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.600414] usbcore: registered new interface driver pl2303 [ 1.601394] usbserial: USB Serial support registered for pl2303 [ 1.602456] i8042: PNP: No PS/2 controller found. [ 1.608802] mousedev: PS/2 mouse device common for all mice [ 1.610653] rtc_cmos 00:04: RTC can wake from S4 [ 1.612426] rtc_cmos 00:04: registered as rtc0 [ 1.613335] rtc_cmos 00:04: setting system clock to 2023-01-13T09:03:08 UTC (1673600588) [ 1.614760] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.616595] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.617677] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.618748] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.621361] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.623031] intel_pstate: CPU model not supported [ 1.623893] sdhci: Secure Digital Host Controller Interface driver [ 1.624970] sdhci: Copyright(c) Pierre Ossman [ 1.625766] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.626893] usbcore: registered new interface driver usbhid [ 1.627855] usbhid: USB HID core driver [ 1.628630] u32 classifier [ 1.629171] input device check on [ 1.629840] Actions configured [ 1.630703] NET: Registered PF_INET6 protocol family [ 1.632342] Segment Routing with IPv6 [ 1.633046] In-situ OAM (IOAM) with IPv6 [ 1.633757] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.635000] NET: Registered PF_PACKET protocol family [ 1.635951] Bridge firewalling registered [ 1.636704] Key type dns_resolver registered [ 1.637595] NET: Registered PF_VSOCK protocol family [ 1.647278] IPI shorthand broadcast: enabled [ 1.648226] sched_clock: Marking stable (1434018971, 214153355)->(1890629745, -242457419) [ 1.649906] Loading compiled-in X.509 certificates [ 1.650967] Key type ._fscrypt registered [ 1.651679] Key type .fscrypt registered [ 1.652359] Key type fscrypt-provisioning registered [ 1.653691] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.666886] Key type encrypted registered [ 1.671976] printk: console [netcon0] enabled [ 1.672825] netconsole: network logging started [ 1.794285] ata2: SATA link down (SStatus 0 SControl 300) [ 1.795651] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.807232] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.808354] ata3.00: applying bridge limits [ 1.810137] ata3.00: configured for UDMA/100 [ 1.812616] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.852527] ata4: SATA link down (SStatus 0 SControl 300) [ 1.859507] ata5: SATA link down (SStatus 0 SControl 300) [ 1.860613] ata6: SATA link down (SStatus 0 SControl 300) [ 1.861988] ata1: SATA link down (SStatus 0 SControl 300) [ 1.863525] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.903686] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.904984] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.962672] IP-Config: Complete: [ 1.963387] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.965857] host=192.168.7.4, domain=, nis-domain=(none) [ 1.966905] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.966908] nameserver0=8.8.8.8 [ 1.969391] md: Waiting for all devices to be available before autodetect [ 1.970277] md: If you don't use raid, use raid=noautodetect [ 1.971045] md: Autodetecting RAID arrays. [ 1.972576] md: autorun ... [ 1.973445] md: ... autorun DONE. [ 1.976297] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.976779] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.977525] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.979213] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.980046] devtmpfs: mounted [ 1.983875] Freeing unused kernel image (initmem) memory: 1936K [ 1.984760] Write protecting the kernel read-only data: 22528k [ 1.987478] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.988800] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.989799] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 2.112607] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.151449] udevd[173]: starting version 3.2.11 [ 2.180261] udevd[174]: starting eudev-3.2.11 [ 2.298147] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.353948] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.423508] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 2.588167] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 13 09:03:09 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" D-BUS per-session daemon address is: unix:path=/tmp/dbus-xNaMjOK0ro,guid=a01b9f89480bcc1b1a706a9563c11e4d Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[599]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=615 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[599]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCM6ZE/OtbWrJnmt1l1vjyQyPVQlha36VrgWRqO/4120FSKIGOVwmSxX8oSQOF2K1H4G7aQdtvtskJygPHPewFAsjEBPqe/0kkPqWKBiix1QXugqtQa+TJO+KSXHzmsI2vQeRptkfqUfd7yEpfSLLgbykPyTAA72s88FDTcpYDXx8n80WHh7n+H/exYryPCqPykIR55oKlEHHoQfMikOcHQwRWtmlcw2FShUA8CXqwHbo4j2sNCVP1c2OGqro6rOdsM5d3fUQI23017KLGy/iS8whbXB2ZkngoJQEhAgiNPa+iCfpHhfjqGhWgc/m+vogfwx3NEbSFCfpMN0Hmy6h9Z root@qemux86-64 Fingerprint: SHA256:TvEZaakyPXX1g9RINarcQcRZhp+GcLYxlw1Mi6QlXao dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ 3.746021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.746730] Bluetooth: BNEP filters: protocol multicast [ 3.747383] Bluetooth: BNEP socket layer initialized ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: