[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000000ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 523121500 cycles [ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000009] tsc: Detected 2599.996 MHz processor [ 0.001015] last_pfn = 0xffd8 max_arch_pfn = 0x400000000 [ 0.001047] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010016] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.010282] ACPI: Early table checksum verification disabled [ 0.010310] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.010317] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010329] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010335] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010339] ACPI: FACS 0x000000000FFE0000 000040 [ 0.010342] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010346] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010349] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010353] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010355] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df] [ 0.010357] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb] [ 0.010358] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f] [ 0.010358] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f] [ 0.010359] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7] [ 0.010360] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3] [ 0.010360] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b] [ 0.010433] Zone ranges: [ 0.010434] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010436] DMA32 [mem 0x0000000001000000-0x000000000ffd7fff] [ 0.010437] Normal empty [ 0.010438] Movable zone start for each node [ 0.010439] Early memory node ranges [ 0.010439] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010441] node 0: [mem 0x0000000000100000-0x000000000ffd7fff] [ 0.010444] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff] [ 0.010856] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010869] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.011488] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.011980] ACPI: PM-Timer IO Port: 0x608 [ 0.011992] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.012024] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.012028] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.012029] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.012030] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.012044] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.012045] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.012050] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.012052] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.012056] TSC deadline timer available [ 0.012058] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.012096] [mem 0x10000000-0xafffffff] available for PCI devices [ 0.012097] Booting paravirtualized kernel on KVM [ 0.012105] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.012114] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.012729] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.012769] Built 1 zonelists, mobility grouping on. Total pages: 64215 [ 0.012770] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.012880] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.012900] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.013455] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014271] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved) [ 0.014328] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014340] Kernel/User page tables isolation: enabled [ 0.014360] ftrace: allocating 47075 entries in 184 pages [ 0.026002] ftrace: allocated 184 pages with 4 groups [ 0.026053] Dynamic Preempt: full [ 0.026523] rcu: Preemptible hierarchical RCU implementation. [ 0.026524] rcu: RCU event tracing is enabled. [ 0.026525] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.026526] All grace periods are expedited (rcu_expedited). [ 0.026527] Trampoline variant of Tasks RCU enabled. [ 0.026528] Rude variant of Tasks RCU enabled. [ 0.026528] Tracing variant of Tasks RCU enabled. [ 0.026529] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.026530] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.030944] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.031115] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.031216] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.031247] random: crng init done [ 0.037966] Console: colour VGA+ 80x25 [ 0.157806] printk: console [ttyS0] enabled [ 0.159689] ACPI: Core revision 20220331 [ 0.160399] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.161940] APIC: Switch to symmetric I/O mode setup [ 0.162985] x2apic enabled [ 0.163694] Switched APIC routing to physical x2apic. [ 0.165586] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.166572] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.168288] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.169289] pid_max: default: 32768 minimum: 301 [ 0.170322] LSM: Security Framework initializing [ 0.171296] landlock: Up and running. [ 0.172300] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.173289] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.175576] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.176299] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.177296] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.178291] Spectre V2 : Mitigation: Retpolines [ 0.179288] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.180288] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.181288] Speculative Store Bypass: Vulnerable [ 0.182294] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.183288] MMIO Stale Data: Unknown: No mitigations [ 0.184291] SRBDS: Unknown: Dependent on hypervisor status [ 0.204967] Freeing SMP alternatives memory: 52K [ 0.205439] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.206421] cblist_init_generic: Setting adjustable number of callback queues. [ 0.207289] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.208286] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.209310] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.210214] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.210357] rcu: Hierarchical SRCU implementation. [ 0.211127] rcu: Max phase no-delay instances is 400. [ 0.211577] smp: Bringing up secondary CPUs ... [ 0.212418] x86: Booting SMP configuration: [ 0.213123] .... node #0, CPUs: #1 #2 #3 [ 0.214822] smp: Brought up 1 node, 4 CPUs [ 0.215977] smpboot: Max logical packages: 1 [ 0.216290] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.217647] devtmpfs: initialized [ 0.218448] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.219297] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.220323] pinctrl core: initialized pinctrl subsystem [ 0.221536] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.222425] thermal_sys: Registered thermal governor 'step_wise' [ 0.222427] thermal_sys: Registered thermal governor 'user_space' [ 0.223399] cpuidle: using governor menu [ 0.225081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.225291] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.226302] PCI: Using configuration type 1 for base access [ 0.228545] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.245601] raid6: sse2x4 gen() 6279 MB/s [ 0.263546] raid6: sse2x2 gen() 6348 MB/s [ 0.281570] raid6: sse2x1 gen() 4694 MB/s [ 0.283294] raid6: using algorithm sse2x2 gen() 6348 MB/s [ 0.302177] raid6: .... xor() 4444 MB/s, rmw enabled [ 0.303293] raid6: using ssse3x2 recovery algorithm [ 0.304399] ACPI: Added _OSI(Module Device) [ 0.306293] ACPI: Added _OSI(Processor Device) [ 0.307292] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.309292] ACPI: Added _OSI(Processor Aggregator Device) [ 0.310312] ACPI: Added _OSI(Linux-Dell-Video) [ 0.311292] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.313293] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.316888] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.320658] ACPI: Interpreter enabled [ 0.322339] ACPI: PM: (supports S0 S3 S5) [ 0.325295] ACPI: Using IOAPIC for interrupt routing [ 0.327358] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.331295] PCI: Using E820 reservations for host bridge windows [ 0.333507] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.339752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.342304] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.346393] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.348433] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.351398] PCI host bridge to bus 0000:00 [ 0.354298] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.357296] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.359296] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.362296] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window] [ 0.365295] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.368295] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.371296] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.373433] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.377784] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.384296] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.391295] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.414298] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.420296] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.425088] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.430295] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.435295] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.445295] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.452836] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.458323] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.465319] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.470252] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.478295] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.481481] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.484859] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.489294] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.493295] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.502300] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.509774] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.515071] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.517643] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.524046] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.526525] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.530915] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.536589] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.538948] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.543447] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.546042] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.548685] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.553802] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.557128] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.560581] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.563292] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.568775] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.570403] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.571398] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.573405] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.574412] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.575392] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.577418] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.579393] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.580351] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.581304] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.582301] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.584308] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.585301] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.586301] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.587300] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.588300] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.589938] SCSI subsystem initialized [ 0.591443] ACPI: bus type USB registered [ 0.592322] usbcore: registered new interface driver usbfs [ 0.593304] usbcore: registered new interface driver hub [ 0.594299] usbcore: registered new device driver usb [ 0.596320] pps_core: LinuxPPS API ver. 1 registered [ 0.597250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.599295] PTP clock support registered [ 0.600515] Bluetooth: Core ver 2.22 [ 0.601262] NET: Registered PF_BLUETOOTH protocol family [ 0.602291] Bluetooth: HCI device and connection manager initialized [ 0.603295] Bluetooth: HCI socket layer initialized [ 0.604165] Bluetooth: L2CAP socket layer initialized [ 0.604296] Bluetooth: SCO socket layer initialized [ 0.605395] PCI: Using ACPI for IRQ routing [ 0.677328] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.678286] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.678286] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.680293] vgaarb: loaded [ 0.680769] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.681290] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.686403] clocksource: Switched to clocksource kvm-clock [ 0.696856] pnp: PnP ACPI init [ 0.697591] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.698866] pnp: PnP ACPI: found 6 devices [ 0.707390] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.708879] NET: Registered PF_INET protocol family [ 0.709660] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.711061] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.712325] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.713435] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.714500] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.715555] TCP: Hash tables configured (established 2048 bind 2048) [ 0.716509] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.717475] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.718514] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.719805] RPC: Registered named UNIX socket transport module. [ 0.720729] RPC: Registered udp transport module. [ 0.721455] RPC: Registered tcp transport module. [ 0.722172] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723151] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.725490] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.726363] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.727323] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window] [ 0.728329] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.729335] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.730654] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.732180] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.733755] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.735051] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.736547] PCI: CLS 0 bytes, default 64 [ 0.737426] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.738814] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.741562] Initialise system trusted keyrings [ 0.742503] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.745053] NFS: Registering the id_resolver key type [ 0.745923] Key type id_resolver registered [ 0.746593] Key type id_legacy registered [ 0.747761] Key type cifs.idmap registered [ 0.757221] xor: automatically using best checksumming function avx [ 0.758240] Key type asymmetric registered [ 0.758795] Asymmetric key parser 'x509' registered [ 0.759479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.760504] io scheduler mq-deadline registered [ 0.761096] io scheduler kyber registered [ 0.762316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.764636] ACPI: button: Power Button [PWRF] [ 0.767558] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.772462] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.776914] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.781807] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.787975] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.790700] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.793937] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.797136] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.802506] Linux agpgart interface v0.103 [ 0.804350] ACPI: bus type drm_connector registered [ 0.806528] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.808575] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.833573] Console: switching to colour dummy device 80x25 [ 0.835772] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.835775] [drm] features: -context_init [ 0.840464] [drm] number of scanouts: 1 [ 0.841715] [drm] number of cap sets: 0 [ 0.843793] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.850868] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.878544] Console: switching to colour frame buffer device 160x50 [ 0.906178] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.913149] brd: module loaded [ 0.924356] loop: module loaded [ 0.925850] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.931040] virtio_blk virtio3: [vda] 263506 512-byte logical blocks (135 MB/129 MiB) [ 0.938766] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.941983] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.946672] scsi host0: ahci [ 0.948330] scsi host1: ahci [ 0.950001] scsi host2: ahci [ 0.951687] scsi host3: ahci [ 0.953372] scsi host4: ahci [ 0.955043] scsi host5: ahci [ 0.956306] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.959055] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.961846] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.964565] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.967300] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.969938] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.975552] e100: Intel(R) PRO/100 Network Driver [ 0.977422] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.979441] e1000: Intel(R) PRO/1000 Network Driver [ 0.981092] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.983036] e1000e: Intel(R) PRO/1000 Network Driver [ 0.984723] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.986610] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.988276] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.989938] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.991828] ehci-pci: EHCI PCI platform driver [ 0.994179] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.995686] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.998005] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.006418] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.008151] hub 1-0:1.0: USB hub found [ 1.009250] hub 1-0:1.0: 6 ports detected [ 1.010747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.012473] ohci-pci: OHCI PCI platform driver [ 1.013731] uhci_hcd: USB Universal Host Controller Interface driver [ 1.016519] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.017990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.020222] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.022206] hub 2-0:1.0: USB hub found [ 1.023326] hub 2-0:1.0: 2 ports detected [ 1.025607] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.027054] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.029419] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.031497] hub 3-0:1.0: USB hub found [ 1.033060] hub 3-0:1.0: 2 ports detected [ 1.036559] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.038891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.041967] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.044643] hub 4-0:1.0: USB hub found [ 1.046139] hub 4-0:1.0: 2 ports detected [ 1.048085] usbcore: registered new interface driver usb-storage [ 1.050758] usbcore: registered new interface driver usbserial_generic [ 1.053241] usbserial: USB Serial support registered for generic [ 1.055481] usbcore: registered new interface driver ftdi_sio [ 1.057635] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.060393] usbcore: registered new interface driver pl2303 [ 1.062530] usbserial: USB Serial support registered for pl2303 [ 1.064768] i8042: PNP: No PS/2 controller found. [ 1.066778] mousedev: PS/2 mouse device common for all mice [ 1.069344] rtc_cmos 00:04: RTC can wake from S4 [ 1.072365] rtc_cmos 00:04: registered as rtc0 [ 1.074223] rtc_cmos 00:04: setting system clock to 2023-01-15T12:30:21 UTC (1673785821) [ 1.077241] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.080729] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.083070] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.085187] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.088782] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.092409] intel_pstate: CPU model not supported [ 1.094241] sdhci: Secure Digital Host Controller Interface driver [ 1.096578] sdhci: Copyright(c) Pierre Ossman [ 1.098109] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.100242] usbcore: registered new interface driver usbhid [ 1.102187] usbhid: USB HID core driver [ 1.103568] u32 classifier [ 1.104486] input device check on [ 1.105658] Actions configured [ 1.106990] NET: Registered PF_INET6 protocol family [ 1.109451] Segment Routing with IPv6 [ 1.110716] In-situ OAM (IOAM) with IPv6 [ 1.112037] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.114047] NET: Registered PF_PACKET protocol family [ 1.115589] Bridge firewalling registered [ 1.116773] Key type dns_resolver registered [ 1.118150] NET: Registered PF_VSOCK protocol family [ 1.120260] IPI shorthand broadcast: enabled [ 1.121548] sched_clock: Marking stable (988338345, 133165100)->(1155325894, -33822449) [ 1.123900] Loading compiled-in X.509 certificates [ 1.125544] Key type ._fscrypt registered [ 1.126651] Key type .fscrypt registered [ 1.127710] Key type fscrypt-provisioning registered [ 1.129902] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.132791] Key type encrypted registered [ 1.136201] printk: console [netcon0] enabled [ 1.137358] netconsole: network logging started [ 1.246426] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.284322] ata6: SATA link down (SStatus 0 SControl 300) [ 1.286764] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.289552] ata5: SATA link down (SStatus 0 SControl 300) [ 1.291891] ata4: SATA link down (SStatus 0 SControl 300) [ 1.294220] ata1: SATA link down (SStatus 0 SControl 300) [ 1.296362] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.298477] ata3.00: applying bridge limits [ 1.300487] ata2: SATA link down (SStatus 0 SControl 300) [ 1.302791] ata3.00: configured for UDMA/100 [ 1.305120] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.342979] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.345531] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.380410] IP-Config: Complete: [ 1.381729] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.385828] host=192.168.7.2, domain=, nis-domain=(none) [ 1.388099] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.388298] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.392527] nameserver0=8.8.8.8 [ 1.392769] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.395427] [ 1.402551] md: Waiting for all devices to be available before autodetect [ 1.404575] md: If you don't use raid, use raid=noautodetect [ 1.406096] md: Autodetecting RAID arrays. [ 1.407326] md: autorun ... [ 1.408099] md: ... autorun DONE. [ 1.411736] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.414136] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.416410] devtmpfs: mounted [ 1.420531] Freeing unused kernel image (initmem) memory: 1936K [ 1.422350] Write protecting the kernel read-only data: 22528k [ 1.426744] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.428867] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.440149] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 1.515354] usb 1-2: new high-speed USB device number 3 using ehci-pci Starting udev [ 1.573881] udevd[169]: starting version 3.2.11 [ 1.587084] udevd[170]: starting eudev-3.2.11 [ 1.674963] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.759053] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.827019] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 1.988449] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting rpcbind daemon...done. starting statd: done Starting atd: OK [ 4.507454] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). starting 8 nfsd kernel threads: [ 5.572852] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 5.575625] NFSD: Using legacy client tracking operations. [ 5.577199] NFSD: starting 90-second grace period (net f0000000) done starting mountd: done Starting system log daemon...0 Starting crond: OK Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0 qemux86-64 login: