[ 0.000000] Linux version 5.19.17-rt10-yocto-preempt-rt (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_RT Mon Jan 2 02:58:07 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000a855df] usable [ 0.000000] reserve setup_data: [mem 0x0000000000a855e0-0x0000000000a8560f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000a85610-0x000000000ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 571401455 cycles [ 0.000007] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000011] tsc: Detected 2599.996 MHz processor [ 0.000921] last_pfn = 0xffd8 max_arch_pfn = 0x400000000 [ 0.000964] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008731] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.009008] ACPI: Early table checksum verification disabled [ 0.009031] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.009037] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009048] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009053] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009056] ACPI: FACS 0x000000000FFE0000 000040 [ 0.009059] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009062] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009065] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009068] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009071] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df] [ 0.009072] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb] [ 0.009072] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f] [ 0.009073] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f] [ 0.009074] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7] [ 0.009074] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3] [ 0.009075] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b] [ 0.009141] Zone ranges: [ 0.009141] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009143] DMA32 [mem 0x0000000001000000-0x000000000ffd7fff] [ 0.009144] Normal empty [ 0.009145] Movable zone start for each node [ 0.009145] Early memory node ranges [ 0.009145] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.009148] node 0: [mem 0x0000000000100000-0x000000000ffd7fff] [ 0.009149] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff] [ 0.009556] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009571] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.010202] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.010644] ACPI: PM-Timer IO Port: 0x608 [ 0.010655] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.010738] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.010744] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.010745] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.010746] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.010748] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.010749] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.010754] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.010756] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.010760] TSC deadline timer available [ 0.010761] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.010800] [mem 0x10000000-0xafffffff] available for PCI devices [ 0.010801] Booting paravirtualized kernel on KVM [ 0.010808] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.010814] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.011393] percpu: Embedded 53 pages/cpu s177344 r8192 d31552 u524288 [ 0.011430] Built 1 zonelists, mobility grouping on. Total pages: 64215 [ 0.011432] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.011528] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.011549] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.011646] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.012430] Memory: 224532K/261592K available (16394K kernel code, 2101K rwdata, 4524K rodata, 1876K init, 2012K bss, 36800K reserved, 0K cma-reserved) [ 0.012488] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.012502] Kernel/User page tables isolation: enabled [ 0.012518] ftrace: allocating 43835 entries in 172 pages [ 0.021915] ftrace: allocated 172 pages with 4 groups [ 0.022359] rcu: Preemptible hierarchical RCU implementation. [ 0.022360] rcu: RCU event tracing is enabled. [ 0.022360] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.022361] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.022362] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.022362] No expedited grace period (rcu_normal_after_boot). [ 0.022362] Trampoline variant of Tasks RCU enabled. [ 0.022363] Rude variant of Tasks RCU enabled. [ 0.022363] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.022364] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.026682] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.026853] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.026868] random: crng init done [ 0.032131] Console: colour VGA+ 80x25 [ 0.181057] printk: console [ttyS0] enabled [ 0.181065] ACPI: Core revision 20220331 [ 0.181196] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.181292] APIC: Switch to symmetric I/O mode setup [ 0.181532] x2apic enabled [ 0.181786] Switched APIC routing to physical x2apic. [ 0.182877] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.182902] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.182905] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.182908] pid_max: default: 32768 minimum: 301 [ 0.182949] LSM: Security Framework initializing [ 0.182974] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.182977] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.184222] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.184229] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.184237] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.184242] Spectre V2 : Mitigation: Retpolines [ 0.184243] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.184244] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.184244] Speculative Store Bypass: Vulnerable [ 0.184249] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.184250] MMIO Stale Data: Unknown: No mitigations [ 0.184250] SRBDS: Unknown: Dependent on hypervisor status [ 0.200819] Freeing SMP alternatives memory: 44K [ 0.200962] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.228427] cblist_init_generic: Setting adjustable number of callback queues. [ 0.228428] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.230937] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.232048] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.233673] rcu: Hierarchical SRCU implementation. [ 0.233674] rcu: Max phase no-delay instances is 400. [ 0.233690] printk: console [ttyS0] printing thread started [ 0.237658] smp: Bringing up secondary CPUs ... [ 0.237792] x86: Booting SMP configuration: [ 0.237793] .... node #0, CPUs: #1 #2 #3 [ 0.241122] smp: Brought up 1 node, 4 CPUs [ 0.241122] smpboot: Max logical packages: 1 [ 0.241122] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.241215] devtmpfs: initialized [ 0.246459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.246922] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.246983] pinctrl core: initialized pinctrl subsystem [ 0.247243] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247463] thermal_sys: Registered thermal governor 'step_wise' [ 0.247465] thermal_sys: Registered thermal governor 'user_space' [ 0.251913] cpuidle: using governor menu [ 0.252109] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.252113] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.252128] PCI: Using configuration type 1 for base access [ 0.256265] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.273905] raid6: sse2x4 gen() 6265 MB/s [ 0.290484] raid6: sse2x2 gen() 6486 MB/s [ 0.306961] raid6: sse2x1 gen() 5387 MB/s [ 0.306963] raid6: using algorithm sse2x2 gen() 6486 MB/s [ 0.324583] raid6: .... xor() 5980 MB/s, rmw enabled [ 0.324595] raid6: using ssse3x2 recovery algorithm [ 0.324908] ACPI: Added _OSI(Module Device) [ 0.324908] ACPI: Added _OSI(Processor Device) [ 0.324908] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.324908] ACPI: Added _OSI(Processor Aggregator Device) [ 0.324908] ACPI: Added _OSI(Linux-Dell-Video) [ 0.324908] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.324908] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.327019] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.329272] ACPI: Interpreter enabled [ 0.329310] ACPI: PM: (supports S0 S3 S5) [ 0.329312] ACPI: Using IOAPIC for interrupt routing [ 0.329361] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.329363] PCI: Using E820 reservations for host bridge windows [ 0.329642] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.335346] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.335356] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.335466] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.335638] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.335724] PCI host bridge to bus 0000:00 [ 0.335726] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.335730] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.335733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.335735] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window] [ 0.335737] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.335740] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.335743] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.335965] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.338052] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.339912] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.341912] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.348912] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.350911] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.354023] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.355912] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.357762] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.362912] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.367976] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.370946] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.374933] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.376932] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.380933] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.381333] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.384208] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.386913] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.389912] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.396914] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.401944] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.405912] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.407962] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.411641] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.414498] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.417913] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.420068] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.420913] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.425967] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.427842] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.428765] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.434732] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.435489] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.438780] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.442913] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.445607] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.445883] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.446122] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.446362] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.446634] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.446917] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.447201] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.447442] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.447538] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.447561] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.447596] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.447617] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.447638] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.447658] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.447678] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.447699] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.449025] SCSI subsystem initialized [ 0.449079] ACPI: bus type USB registered [ 0.449079] usbcore: registered new interface driver usbfs [ 0.449079] usbcore: registered new interface driver hub [ 0.449079] usbcore: registered new device driver usb [ 0.449110] pps_core: LinuxPPS API ver. 1 registered [ 0.449112] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.449118] PTP clock support registered [ 0.450356] Bluetooth: Core ver 2.22 [ 0.450373] NET: Registered PF_BLUETOOTH protocol family [ 0.450375] Bluetooth: HCI device and connection manager initialized [ 0.450383] Bluetooth: HCI socket layer initialized [ 0.450386] Bluetooth: L2CAP socket layer initialized [ 0.450397] Bluetooth: SCO socket layer initialized [ 0.450469] PCI: Using ACPI for IRQ routing [ 0.643242] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.643242] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.643242] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.643242] vgaarb: loaded [ 0.643242] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.643242] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.647061] clocksource: Switched to clocksource kvm-clock [ 0.647810] pnp: PnP ACPI init [ 0.648182] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.648865] pnp: PnP ACPI: found 6 devices [ 0.656057] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.656115] NET: Registered PF_INET protocol family [ 0.656180] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.656638] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear) [ 0.656648] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.656652] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.656667] TCP bind hash table entries: 2048 (order: 4, 81920 bytes, linear) [ 0.657246] TCP: Hash tables configured (established 2048 bind 2048) [ 0.657292] UDP hash table entries: 256 (order: 2, 24576 bytes, linear) [ 0.657306] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear) [ 0.657397] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.657794] RPC: Registered named UNIX socket transport module. [ 0.657796] RPC: Registered udp transport module. [ 0.657797] RPC: Registered tcp transport module. [ 0.657798] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.657814] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.657819] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.657821] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.657823] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window] [ 0.657825] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.657827] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.658671] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.661768] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.663709] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.665589] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.667132] PCI: CLS 0 bytes, default 64 [ 0.669038] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.669054] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.680976] Initialise system trusted keyrings [ 0.681112] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.685066] NFS: Registering the id_resolver key type [ 0.685075] Key type id_resolver registered [ 0.685076] Key type id_legacy registered [ 0.698996] xor: automatically using best checksumming function avx [ 0.698998] Key type asymmetric registered [ 0.699002] Asymmetric key parser 'x509' registered [ 0.699023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.699028] io scheduler mq-deadline registered [ 0.699029] io scheduler kyber registered [ 0.700714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.704047] ACPI: button: Power Button [PWRF] [ 0.705147] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.708317] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.711415] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.714406] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.717121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.717427] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.717789] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.719081] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.724087] Linux agpgart interface v0.103 [ 0.724242] ACPI: bus type drm_connector registered [ 0.724479] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.724488] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.736943] Console: switching to colour dummy device 80x25 [ 0.737168] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.737170] [drm] features: -context_init [ 0.738733] [drm] number of scanouts: 1 [ 0.738740] [drm] number of cap sets: 0 [ 0.739201] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.743517] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.750313] Console: switching to colour frame buffer device 160x50 [ 0.787239] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.831698] brd: module loaded [ 0.835809] loop: module loaded [ 0.836412] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.843763] virtio_blk virtio3: [vda] 273874 512-byte logical blocks (140 MB/134 MiB) [ 0.852646] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.852655] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.857064] scsi host0: ahci [ 0.857728] scsi host1: ahci [ 0.858210] scsi host2: ahci [ 0.858641] scsi host3: ahci [ 0.859045] scsi host4: ahci [ 0.859421] scsi host5: ahci [ 0.859626] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.859660] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.859675] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.859689] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.859702] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.859715] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.866250] e100: Intel(R) PRO/100 Network Driver [ 0.866253] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.866279] e1000: Intel(R) PRO/1000 Network Driver [ 0.866281] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.866313] e1000e: Intel(R) PRO/1000 Network Driver [ 0.866314] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.866343] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.866344] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.866382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.866384] ehci-pci: EHCI PCI platform driver [ 0.868828] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.868851] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.869948] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.877117] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.877713] hub 1-0:1.0: USB hub found [ 0.877732] hub 1-0:1.0: 6 ports detected [ 0.879035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.879046] ohci-pci: OHCI PCI platform driver [ 0.879075] uhci_hcd: USB Universal Host Controller Interface driver [ 0.881330] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.881348] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.882136] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.882772] hub 2-0:1.0: USB hub found [ 0.882786] hub 2-0:1.0: 2 ports detected [ 0.885352] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.885367] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.886644] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.887235] hub 3-0:1.0: USB hub found [ 0.887249] hub 3-0:1.0: 2 ports detected [ 0.889776] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.889792] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.890341] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.891265] hub 4-0:1.0: USB hub found [ 0.891282] hub 4-0:1.0: 2 ports detected [ 0.891806] usbcore: registered new interface driver usb-storage [ 0.891857] usbcore: registered new interface driver usbserial_generic [ 0.891871] usbserial: USB Serial support registered for generic [ 0.891889] usbcore: registered new interface driver ftdi_sio [ 0.891899] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.891960] usbcore: registered new interface driver pl2303 [ 0.891971] usbserial: USB Serial support registered for pl2303 [ 0.892035] i8042: PNP: No PS/2 controller found. [ 0.892167] mousedev: PS/2 mouse device common for all mice [ 0.892691] rtc_cmos 00:04: RTC can wake from S4 [ 0.895406] rtc_cmos 00:04: registered as rtc0 [ 0.895671] rtc_cmos 00:04: setting system clock to 2023-01-15T01:27:30 UTC (1673746050) [ 0.895734] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.897229] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.897435] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.897439] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.897866] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.898017] intel_pstate: CPU model not supported [ 0.898055] sdhci: Secure Digital Host Controller Interface driver [ 0.898056] sdhci: Copyright(c) Pierre Ossman [ 0.898097] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.898206] usbcore: registered new interface driver usbhid [ 0.898208] usbhid: USB HID core driver [ 0.898257] u32 classifier [ 0.898258] input device check on [ 0.898259] Actions configured [ 0.898669] NET: Registered PF_INET6 protocol family [ 0.899581] Segment Routing with IPv6 [ 0.899597] In-situ OAM (IOAM) with IPv6 [ 0.899643] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.900411] NET: Registered PF_PACKET protocol family [ 0.900472] Key type dns_resolver registered [ 0.900678] NET: Registered PF_VSOCK protocol family [ 0.903373] IPI shorthand broadcast: enabled [ 0.903443] sched_clock: Marking stable (748235127, 155046958)->(978380640, -75098555) [ 0.903840] registered taskstats version 1 [ 0.903845] Loading compiled-in X.509 certificates [ 0.904110] Key type ._fscrypt registered [ 0.904113] Key type .fscrypt registered [ 0.904114] Key type fscrypt-provisioning registered [ 0.904965] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.906299] Key type encrypted registered [ 0.911398] printk: console [netcon0] enabled [ 0.911398] printk: console [netcon0] printing thread started [ 0.911402] netconsole: network logging started [ 1.119002] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.173275] ata5: SATA link down (SStatus 0 SControl 300) [ 1.173813] ata4: SATA link down (SStatus 0 SControl 300) [ 1.174572] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.175033] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.175041] ata3.00: applying bridge limits [ 1.175605] ata3.00: configured for UDMA/100 [ 1.179695] ata6: SATA link down (SStatus 0 SControl 300) [ 1.184303] ata1: SATA link down (SStatus 0 SControl 300) [ 1.185081] ata2: SATA link down (SStatus 0 SControl 300) [ 1.185744] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.229610] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.229623] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.256057] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.256201] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.264043] IP-Config: Complete: [ 1.264047] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.264053] host=192.168.7.2, domain=, nis-domain=(none) [ 1.264055] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.264058] nameserver0=8.8.8.8 [ 1.283709] md: Waiting for all devices to be available before autodetect [ 1.283713] md: If you don't use raid, use raid=noautodetect [ 1.283723] md: Autodetecting RAID arrays. [ 1.283725] md: autorun ... [ 1.283726] md: ... autorun DONE. [ 1.287169] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.287221] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.287796] devtmpfs: mounted [ 1.291466] Freeing unused kernel image (initmem) memory: 1876K [ 1.298075] Write protecting the kernel read-only data: 24576k [ 1.301208] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.302237] Freeing unused kernel image (rodata/data gap) memory: 1620K [ 1.302415] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO fai[ 1.372995] usb 1-2: new high-speed USB device number 3 using ehci-pci led, double buffering disabled Starting udev [ 1.489426] udevd[199]: starting version 3.2.11 [ 1.507670] udevd[200]: starting eudev-3.2.11 [ 1.531690] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.583585] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.762996] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 1.877019] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting rpcbind daemon...done. starting statd: done Starting atd: OK [ 3.208502] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). starting 8 nfsd kernel threads: [ 4.277497] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 4.277806] NFSD: Using legacy client tracking operations. [ 4.277817] NFSD: starting 90-second grace period (net f0000000) done starting mountd: done Starting system log daemon...0 Starting crond: OK Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0 qemux86-64 login: