[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230115) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467412453 ns [ 0.000199] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884732925ns [ 0.007827] Console: colour dummy device 80x25 [ 0.008526] printk: console [tty0] enabled [ 0.011384] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230115) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467412453 ns [ 0.000199] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884732925ns [ 0.007827] Console: colour dummy device 80x25 [ 0.008526] printk: console [tty0] enabled [ 0.011384] printk: bootconsole [uart8250] disabled [ 0.013177] Calibrating delay loop... 1064.96 BogoMIPS (lpj=5324800) [ 0.051914] pid_max: default: 32768 minimum: 301 [ 0.052951] LSM: Security Framework initializing [ 0.054050] landlock: Up and running. [ 0.057179] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.057332] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.094879] cblist_init_generic: Setting adjustable number of callback queues. [ 0.095094] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.095554] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.096317] Performance counters: No available PMU. [ 0.097323] rcu: Hierarchical SRCU implementation. [ 0.097396] rcu: Max phase no-delay instances is 1000. [ 0.114655] smp: Bringing up secondary CPUs ... [ 0.114807] smp: Brought up 1 node, 1 CPU [ 0.131277] devtmpfs: initialized [ 0.138861] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.139118] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.148000] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.563918] raid6: int32x8 gen() 232 MB/s [ 0.916553] raid6: int32x4 gen() 629 MB/s [ 1.221469] raid6: int32x2 gen() 696 MB/s [ 1.384883] raid6: int32x1 gen() 539 MB/s [ 1.385048] raid6: using algorithm int32x2 gen() 696 MB/s [ 1.566240] raid6: .... xor() 394 MB/s, rmw enabled [ 1.566426] raid6: using intx1 recovery algorithm [ 1.569367] SCSI subsystem initialized [ 1.570025] usbcore: registered new interface driver usbfs [ 1.570373] usbcore: registered new interface driver hub [ 1.570619] usbcore: registered new device driver usb [ 1.571062] pps_core: LinuxPPS API ver. 1 registered [ 1.571129] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.571298] PTP clock support registered [ 1.586977] PCI host bridge to bus 0000:00 [ 1.587374] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.587958] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.588136] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.589657] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.590434] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.590536] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.590619] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.590695] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.590784] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.593599] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.594284] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.594727] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.594880] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.594968] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.595067] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.595145] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.595557] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.595680] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.596289] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.596939] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.597100] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.597647] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.597740] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.597885] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.597974] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.598455] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.598558] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.598726] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.598869] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.599238] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.599333] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.599437] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.599820] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.599916] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.600012] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.600744] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.602139] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.602477] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.602626] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.602740] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.602898] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.602999] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.603126] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.603244] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.603333] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.603401] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.603476] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.603553] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.605645] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.605785] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.605899] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.606027] vgaarb: loaded [ 1.608364] clocksource: Switched to clocksource MIPS [ 1.767004] NET: Registered PF_INET protocol family [ 1.768537] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.777392] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.777614] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.777749] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.778079] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.778264] TCP: Hash tables configured (established 2048 bind 2048) [ 1.779468] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.779781] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.781551] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.785184] RPC: Registered named UNIX socket transport module. [ 1.785300] RPC: Registered udp transport module. [ 1.785357] RPC: Registered tcp transport module. [ 1.785408] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.786154] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.786997] PCI: CLS 0 bytes, default 16 [ 1.796192] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.813140] NFS: Registering the id_resolver key type [ 1.814481] Key type id_resolver registered [ 1.814576] Key type id_legacy registered [ 1.817457] Key type cifs.idmap registered [ 1.956683] xor: measuring software checksum speed [ 1.967489] 8regs : 957 MB/sec [ 1.978858] 8regs_prefetch : 900 MB/sec [ 1.989578] 32regs : 949 MB/sec [ 2.000786] 32regs_prefetch : 903 MB/sec [ 2.000915] xor: using function: 8regs (957 MB/sec) [ 2.001607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.001831] io scheduler mq-deadline registered [ 2.001954] io scheduler kyber registered [ 2.012378] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.015283] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.016327] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.018853] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.024674] printk: console [ttyS0] disabled [ 2.048754] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.048934] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.074253] printk: console [ttyS0] enabled [ 2.097927] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.098296] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.098911] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.106204] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.108652] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.109591] [drm] Found bochs VGA, ID 0xb0c5. [ 2.109828] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.113330] [drm] Found EDID data blob. [ 2.118695] random: crng init done [ 2.120263] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.218624] Console: switching to colour frame buffer device 160x50 [ 2.234883] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.268470] brd: module loaded [ 2.269622] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.275017] virtio_blk virtio2: [vda] 1151668 512-byte logical blocks (590 MB/562 MiB) [ 2.317552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.318408] ehci-pci: EHCI PCI platform driver [ 2.319031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.319581] ohci-pci: OHCI PCI platform driver [ 2.320201] uhci_hcd: USB Universal Host Controller Interface driver [ 2.321930] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.323401] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.324693] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.333384] hub 1-0:1.0: USB hub found [ 2.335277] hub 1-0:1.0: 2 ports detected [ 2.344523] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.345747] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.350954] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 2.354396] usbcore: registered new interface driver usbhid [ 2.354929] usbhid: USB HID core driver [ 2.355846] u32 classifier [ 2.356162] input device check on [ 2.356543] Actions configured [ 2.360342] NET: Registered PF_INET6 protocol family [ 2.368512] Segment Routing with IPv6 [ 2.369471] In-situ OAM (IOAM) with IPv6 [ 2.379390] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.386834] NET: Registered PF_PACKET protocol family [ 2.398383] Bridge firewalling registered [ 2.419880] Key type dns_resolver registered [ 2.428739] NET: Registered PF_VSOCK protocol family [ 2.450030] Key type ._fscrypt registered [ 2.456494] Key type .fscrypt registered [ 2.465634] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.471948] Key type fscrypt-provisioning registered [ 2.494339] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.524999] Key type encrypted registered [ 2.545966] printk: console [netcon0] enabled [ 2.563824] netconsole: network logging started [ 2.648376] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 2.920066] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 2.926228] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.121663] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.178718] IP-Config: Complete: [ 3.188059] device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9 [ 3.194859] host=192.168.7.10, domain=, nis-domain=(none) [ 3.221839] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.221953] nameserver0=8.8.8.8 [ 3.253786] md: Waiting for all devices to be available before autodetect [ 3.263176] md: If you don't use raid, use raid=noautodetect [ 3.281339] md: Autodetecting RAID arrays. [ 3.288031] md: autorun ... [ 3.292141] md: ... autorun DONE. [ 3.338194] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.364580] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 3.370036] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.385887] devtmpfs: mounted [ 3.471932] Freeing unused kernel image (initmem) memory: 424K [ 3.477979] This architecture does not have kernel memory protection. [ 3.482495] Run /sbin/init as init process [ 3.516788] process '/sbin/init.sysvinit' started with executable stack [ 6.876546] udevd[124]: starting version 3.2.11 [ 7.019250] udevd[125]: starting eudev-3.2.11 [ 15.664281] EXT4-fs (vda): re-mounted. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 5.19.17-yocto-standard #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023 mips Kernel command line: root=/dev/vda rw ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 16 16:55:15 2023 Starting rpcbind daemon...(==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. hwclock: can't open '/dev/misc/rtc': No such file or directory Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemumips /dev/ttyS0 qemumips login: