[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000000ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 464256472 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000008] tsc: Detected 2299.996 MHz processor [ 0.001139] last_pfn = 0xffd8 max_arch_pfn = 0x400000000 [ 0.001172] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005919] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.006091] ACPI: Early table checksum verification disabled [ 0.006095] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.006109] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006115] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006121] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006125] ACPI: FACS 0x000000000FFE0000 000040 [ 0.006128] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006131] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006134] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006137] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006140] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df] [ 0.006141] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb] [ 0.006142] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f] [ 0.006143] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f] [ 0.006144] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7] [ 0.006145] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3] [ 0.006146] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b] [ 0.006209] Zone ranges: [ 0.006210] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006213] DMA32 [mem 0x0000000001000000-0x000000000ffd7fff] [ 0.006214] Normal empty [ 0.006215] Movable zone start for each node [ 0.006216] Early memory node ranges [ 0.006216] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.006218] node 0: [mem 0x0000000000100000-0x000000000ffd7fff] [ 0.006219] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff] [ 0.006618] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006637] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.007294] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.007624] ACPI: PM-Timer IO Port: 0x608 [ 0.007633] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.007673] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.007676] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.007679] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.007680] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.007682] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.007683] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.007687] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.007688] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.007692] TSC deadline timer available [ 0.007694] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.007714] [mem 0x10000000-0xafffffff] available for PCI devices [ 0.007715] Booting paravirtualized kernel on KVM [ 0.007718] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.007723] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.008259] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.008295] Built 1 zonelists, mobility grouping on. Total pages: 64215 [ 0.008297] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.008390] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.008412] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.008939] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.009854] Memory: 224532K/261592K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 36800K reserved, 0K cma-reserved) [ 0.009901] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.009908] Kernel/User page tables isolation: enabled [ 0.009920] ftrace: allocating 47075 entries in 184 pages [ 0.019638] ftrace: allocated 184 pages with 4 groups [ 0.019724] Dynamic Preempt: full [ 0.020151] rcu: Preemptible hierarchical RCU implementation. [ 0.020152] rcu: RCU event tracing is enabled. [ 0.020153] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.020154] All grace periods are expedited (rcu_expedited). [ 0.020155] Trampoline variant of Tasks RCU enabled. [ 0.020156] Rude variant of Tasks RCU enabled. [ 0.020156] Tracing variant of Tasks RCU enabled. [ 0.020157] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.020158] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.025316] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.025502] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.025589] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.025601] random: crng init done [ 0.034990] Console: colour VGA+ 80x25 [ 0.136169] printk: console [ttyS0] enabled [ 0.136486] ACPI: Core revision 20220331 [ 0.136897] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.137668] APIC: Switch to symmetric I/O mode setup [ 0.138165] x2apic enabled [ 0.138521] Switched APIC routing to physical x2apic. [ 0.144646] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.145119] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.145916] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996) [ 0.146505] pid_max: default: 32768 minimum: 301 [ 0.146945] LSM: Security Framework initializing [ 0.147282] landlock: Up and running. [ 0.147579] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.147918] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.149593] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.149919] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.150343] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150919] Spectre V2 : Mitigation: Retpolines [ 0.151249] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.151917] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.152394] Speculative Store Bypass: Vulnerable [ 0.152917] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.153384] MMIO Stale Data: Unknown: No mitigations [ 0.153741] SRBDS: Unknown: Dependent on hypervisor status [ 0.171768] Freeing SMP alternatives memory: 52K [ 0.172053] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.173092] cblist_init_generic: Setting adjustable number of callback queues. [ 0.173649] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.173941] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.174392] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.174880] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.174963] rcu: Hierarchical SRCU implementation. [ 0.175306] rcu: Max phase no-delay instances is 400. [ 0.175953] smp: Bringing up secondary CPUs ... [ 0.176385] x86: Booting SMP configuration: [ 0.176693] .... node #0, CPUs: #1 #2 #3 [ 0.204947] smp: Brought up 1 node, 4 CPUs [ 0.206262] smpboot: Max logical packages: 1 [ 0.206599] smpboot: Total of 4 processors activated (18399.96 BogoMIPS) [ 0.207085] devtmpfs: initialized [ 0.207347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.207923] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.208515] pinctrl core: initialized pinctrl subsystem [ 0.209678] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.210096] thermal_sys: Registered thermal governor 'step_wise' [ 0.210098] thermal_sys: Registered thermal governor 'user_space' [ 0.210928] cpuidle: using governor menu [ 0.212326] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.212920] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.213939] PCI: Using configuration type 1 for base access [ 0.215988] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.232830] raid6: sse2x4 gen() 18802 MB/s [ 0.251330] raid6: sse2x2 gen() 15309 MB/s [ 0.268283] raid6: sse2x1 gen() 6143 MB/s [ 0.268692] raid6: using algorithm sse2x4 gen() 18802 MB/s [ 0.287055] raid6: .... xor() 6620 MB/s, rmw enabled [ 0.287534] raid6: using ssse3x2 recovery algorithm [ 0.288993] ACPI: Added _OSI(Module Device) [ 0.289340] ACPI: Added _OSI(Processor Device) [ 0.289685] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.291921] ACPI: Added _OSI(Processor Aggregator Device) [ 0.295931] ACPI: Added _OSI(Linux-Dell-Video) [ 0.296297] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.296707] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.298906] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.313016] ACPI: Interpreter enabled [ 0.313418] ACPI: PM: (supports S0 S3 S5) [ 0.314920] ACPI: Using IOAPIC for interrupt routing [ 0.315355] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.315355] PCI: Using E820 reservations for host bridge windows [ 0.315472] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.315743] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.315915] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.315915] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.315915] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.315975] PCI host bridge to bus 0000:00 [ 0.316300] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.316915] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.316915] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.316915] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window] [ 0.316915] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.318922] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.319507] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.319996] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.320883] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.322920] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.331810] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.335921] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.339923] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.341001] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.349922] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.351455] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.355458] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.358418] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.378645] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.381923] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.383485] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.401606] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.402995] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.404140] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.405501] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.406919] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.410676] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.418463] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.420604] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.422819] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.424808] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.425874] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.431794] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.432799] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.434303] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.436913] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.437686] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.438116] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.448250] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.449246] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.450521] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.455228] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.458295] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.458865] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.458865] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.458865] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.458915] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.458915] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.458915] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.458915] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.458915] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.458915] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.458915] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.458915] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.458915] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.458915] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.458915] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.458915] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.458915] SCSI subsystem initialized [ 0.459958] ACPI: bus type USB registered [ 0.460359] usbcore: registered new interface driver usbfs [ 0.460810] usbcore: registered new interface driver hub [ 0.460915] usbcore: registered new device driver usb [ 0.460915] pps_core: LinuxPPS API ver. 1 registered [ 0.460915] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.460915] PTP clock support registered [ 0.460915] Bluetooth: Core ver 2.22 [ 0.460915] NET: Registered PF_BLUETOOTH protocol family [ 0.460915] Bluetooth: HCI device and connection manager initialized [ 0.460915] Bluetooth: HCI socket layer initialized [ 0.460915] Bluetooth: L2CAP socket layer initialized [ 0.460915] Bluetooth: SCO socket layer initialized [ 0.461942] PCI: Using ACPI for IRQ routing [ 0.512944] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.513472] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.513915] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.513921] vgaarb: loaded [ 0.514184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.514587] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.521969] clocksource: Switched to clocksource kvm-clock [ 0.522658] pnp: PnP ACPI init [ 0.523122] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.523949] pnp: PnP ACPI: found 6 devices [ 0.544140] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.553653] NET: Registered PF_INET protocol family [ 0.554103] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.555123] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.555764] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.556350] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.556935] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.557466] TCP: Hash tables configured (established 2048 bind 2048) [ 0.557976] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.571755] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.580224] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.588411] RPC: Registered named UNIX socket transport module. [ 0.590172] RPC: Registered udp transport module. [ 0.590534] RPC: Registered tcp transport module. [ 0.590900] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.591741] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.596138] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.596616] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.597144] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window] [ 0.597662] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.598184] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.599090] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.600310] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.601437] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.602547] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.613246] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x700 took 10642 usecs [ 0.621208] PCI: CLS 0 bytes, default 64 [ 0.629596] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.630273] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.632021] Initialise system trusted keyrings [ 0.632600] workingset: timestamp_bits=46 max_order=16 bucket_order=0 [ 0.634781] NFS: Registering the id_resolver key type [ 0.635222] Key type id_resolver registered [ 0.635541] Key type id_legacy registered [ 0.640007] Key type cifs.idmap registered [ 0.651716] xor: automatically using best checksumming function avx [ 0.665105] Key type asymmetric registered [ 0.669363] Asymmetric key parser 'x509' registered [ 0.671281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.671839] io scheduler mq-deadline registered [ 0.672182] io scheduler kyber registered [ 0.673033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.677019] ACPI: button: Power Button [PWRF] [ 0.678126] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.679520] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.680809] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.682146] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.691367] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.691985] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.692873] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.693760] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.716362] Linux agpgart interface v0.103 [ 0.716856] ACPI: bus type drm_connector registered [ 0.717375] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.717835] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.724414] Console: switching to colour dummy device 80x25 [ 0.725039] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.725041] [drm] features: -context_init [ 0.726384] [drm] number of scanouts: 1 [ 0.726727] [drm] number of cap sets: 0 [ 0.730862] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.734352] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.752565] Console: switching to colour frame buffer device 160x50 [ 0.856736] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.871618] brd: module loaded [ 0.873661] loop: module loaded [ 0.874064] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.880019] virtio_blk virtio3: [vda] 54684 512-byte logical blocks (28.0 MB/26.7 MiB) [ 0.882766] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.883424] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.885278] scsi host0: ahci [ 0.885900] scsi host1: ahci [ 0.886518] scsi host2: ahci [ 0.887136] scsi host3: ahci [ 0.887739] scsi host4: ahci [ 0.888356] scsi host5: ahci [ 0.888661] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.889237] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.889795] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.890346] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.890909] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.891463] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.139822] e100: Intel(R) PRO/100 Network Driver [ 1.140361] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.140802] e1000: Intel(R) PRO/1000 Network Driver [ 1.141167] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.141617] e1000e: Intel(R) PRO/1000 Network Driver [ 1.141994] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.142450] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.142866] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.143326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.143813] ehci-pci: EHCI PCI platform driver [ 1.144879] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.145299] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.146003] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.152993] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.154040] hub 1-0:1.0: USB hub found [ 1.154359] hub 1-0:1.0: 6 ports detected [ 1.154876] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.155371] ohci-pci: OHCI PCI platform driver [ 1.155721] uhci_hcd: USB Universal Host Controller Interface driver [ 1.156800] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.157206] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.157845] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.158827] hub 2-0:1.0: USB hub found [ 1.159161] hub 2-0:1.0: 2 ports detected [ 1.160225] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.160629] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.161281] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.162305] hub 3-0:1.0: USB hub found [ 1.164280] hub 3-0:1.0: 2 ports detected [ 1.166929] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.171632] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.172488] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.173280] hub 4-0:1.0: USB hub found [ 1.173599] hub 4-0:1.0: 2 ports detected [ 1.174080] usbcore: registered new interface driver usb-storage [ 1.174544] usbcore: registered new interface driver usbserial_generic [ 1.175342] usbserial: USB Serial support registered for generic [ 1.175801] usbcore: registered new interface driver ftdi_sio [ 1.176428] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.177232] usbcore: registered new interface driver pl2303 [ 1.177672] usbserial: USB Serial support registered for pl2303 [ 1.178312] i8042: PNP: No PS/2 controller found. [ 1.178905] mousedev: PS/2 mouse device common for all mice [ 1.186199] rtc_cmos 00:04: RTC can wake from S4 [ 1.187315] rtc_cmos 00:04: registered as rtc0 [ 1.187729] rtc_cmos 00:04: setting system clock to 2023-01-16T01:15:58 UTC (1673831758) [ 1.188357] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.189247] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.189743] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.190171] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.202985] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.204026] intel_pstate: CPU model not supported [ 1.204419] sdhci: Secure Digital Host Controller Interface driver [ 1.204881] sdhci: Copyright(c) Pierre Ossman [ 1.205247] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.205765] usbcore: registered new interface driver usbhid [ 1.206184] usbhid: USB HID core driver [ 1.206509] u32 classifier [ 1.206720] input device check on [ 1.207000] Actions configured [ 1.207799] NET: Registered PF_INET6 protocol family [ 1.214787] Segment Routing with IPv6 [ 1.215173] In-situ OAM (IOAM) with IPv6 [ 1.215495] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.216079] NET: Registered PF_PACKET protocol family [ 1.216475] Bridge firewalling registered [ 1.216793] Key type dns_resolver registered [ 1.217511] NET: Registered PF_VSOCK protocol family [ 1.222728] IPI shorthand broadcast: enabled [ 1.224013] sched_clock: Marking stable (1106573552, 117405297)->(1377048656, -153069807) [ 1.226137] Loading compiled-in X.509 certificates [ 1.226763] Key type ._fscrypt registered [ 1.227108] Key type .fscrypt registered [ 1.227405] Key type fscrypt-provisioning registered [ 1.228159] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.229422] Key type encrypted registered [ 1.232390] printk: console [netcon0] enabled [ 1.232770] netconsole: network logging started [ 1.393124] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.460746] ata6: SATA link down (SStatus 0 SControl 300) [ 1.467434] ata2: SATA link down (SStatus 0 SControl 300) [ 1.468027] ata5: SATA link down (SStatus 0 SControl 300) [ 1.468551] ata1: SATA link down (SStatus 0 SControl 300) [ 1.469115] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.469757] ata4: SATA link down (SStatus 0 SControl 300) [ 1.470440] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.470909] ata3.00: applying bridge limits [ 1.471563] ata3.00: configured for UDMA/100 [ 1.478286] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.513283] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.513868] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.526925] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.528253] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.543960] IP-Config: Complete: [ 1.544625] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.545367] host=192.168.7.2, domain=, nis-domain=(none) [ 1.545798] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.545799] nameserver0=8.8.8.8 [ 1.547161] md: Waiting for all devices to be available before autodetect [ 1.547510] md: If you don't use raid, use raid=noautodetect [ 1.547786] md: Autodetecting RAID arrays. [ 1.547998] md: autorun ... [ 1.548359] md: ... autorun DONE. [ 1.549968] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.550504] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.553949] devtmpfs: mounted [ 1.555467] Freeing unused kernel image (initmem) memory: 1936K [ 1.560972] Write protecting the kernel read-only data: 22528k [ 1.562148] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.562823] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.563307] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 1.618801] udevd[161]: starting version 3.2.11 [ 1.624449] udevd[162]: starting eudev-3.2.11 [ 1.647481] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.800653] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.853465] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.916711] EXT4-fs (vda): re-mounted. Quota mode: disabled. update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: [ 2.159258] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready