[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 5637352503 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000007] tsc: Detected 2599.996 MHz processor
[    0.000935] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000974] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008561] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.008722] ACPI: Early table checksum verification disabled
[    0.008738] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.008746] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008756] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008762] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008766] ACPI: FACS 0x000000001FFE0000 000040
[    0.008769] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008773] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008776] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008779] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008782] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6]
[    0.008783] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2]
[    0.008784] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008785] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366]
[    0.008786] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e]
[    0.008786] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da]
[    0.008787] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402]
[    0.008852] Zone ranges:
[    0.008853]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008855]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.008856]   Normal   empty
[    0.008857] Movable zone start for each node
[    0.008858] Early memory node ranges
[    0.008858]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008860]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.008861] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.029713] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.029733] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.231527] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.232085] ACPI: PM-Timer IO Port: 0x608
[    0.232100] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.232146] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.232150] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.232152] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.232153] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.232155] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.232156] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.232160] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.232161] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.232166] TSC deadline timer available
[    0.232168] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.232211] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.232213] Booting paravirtualized kernel on KVM
[    0.232216] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.232222] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.244914] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.244974] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.244977] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.245161] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.245224] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.251981] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.258733] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved)
[    0.258809] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.258818] Kernel/User page tables isolation: enabled
[    0.258834] ftrace: allocating 47075 entries in 184 pages
[    0.270135] ftrace: allocated 184 pages with 4 groups
[    0.270230] Dynamic Preempt: full
[    0.270707] rcu: Preemptible hierarchical RCU implementation.
[    0.270708] rcu: 	RCU event tracing is enabled.
[    0.270708] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.270710] 	All grace periods are expedited (rcu_expedited).
[    0.270711] 	Trampoline variant of Tasks RCU enabled.
[    0.270712] 	Rude variant of Tasks RCU enabled.
[    0.270712] 	Tracing variant of Tasks RCU enabled.
[    0.270713] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.270714] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.275255] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.275474] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.275611] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.275631] random: crng init done
[    0.283644] Console: colour VGA+ 80x25
[    0.373483] printk: console [ttyS0] enabled
[    0.374045] ACPI: Core revision 20220331
[    0.374749] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.376090] APIC: Switch to symmetric I/O mode setup
[    0.377002] x2apic enabled
[    0.377667] Switched APIC routing to physical x2apic.
[    0.379410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.380243] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.381576] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.382577] pid_max: default: 32768 minimum: 301
[    0.383600] LSM: Security Framework initializing
[    0.384210] landlock: Up and running.
[    0.385581] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.386579] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.387913] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.388581] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.389578] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.390577] Spectre V2 : Mitigation: Retpolines
[    0.391151] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.391576] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.392403] Speculative Store Bypass: Vulnerable
[    0.392577] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.393576] MMIO Stale Data: Unknown: No mitigations
[    0.394211] SRBDS: Unknown: Dependent on hypervisor status
[    0.413139] Freeing SMP alternatives memory: 52K
[    0.413739] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.414755] cblist_init_generic: Setting adjustable number of callback queues.
[    0.415577] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.416364] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.416597] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.417384] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.417629] rcu: Hierarchical SRCU implementation.
[    0.418232] rcu: 	Max phase no-delay instances is 400.
[    0.418862] smp: Bringing up secondary CPUs ...
[    0.419582] x86: Booting SMP configuration:
[    0.420142] .... node  #0, CPUs:      #1 #2 #3
[    0.420901] smp: Brought up 1 node, 4 CPUs
[    0.422120] smpboot: Max logical packages: 1
[    0.422578] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.423695] devtmpfs: initialized
[    0.424187] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.424583] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.425491] pinctrl core: initialized pinctrl subsystem
[    0.426775] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.427759] thermal_sys: Registered thermal governor 'step_wise'
[    0.427761] thermal_sys: Registered thermal governor 'user_space'
[    0.428606] cpuidle: using governor menu
[    0.429718] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.430580] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.431611] PCI: Using configuration type 1 for base access
[    0.433735] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.451578] raid6: sse2x4   gen() 14676 MB/s
[    0.468579] raid6: sse2x2   gen() 14906 MB/s
[    0.485579] raid6: sse2x1   gen() 11518 MB/s
[    0.486213] raid6: using algorithm sse2x2 gen() 14906 MB/s
[    0.503579] raid6: .... xor() 10264 MB/s, rmw enabled
[    0.504327] raid6: using ssse3x2 recovery algorithm
[    0.504671] ACPI: Added _OSI(Module Device)
[    0.505304] ACPI: Added _OSI(Processor Device)
[    0.505579] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.506168] ACPI: Added _OSI(Processor Aggregator Device)
[    0.506578] ACPI: Added _OSI(Linux-Dell-Video)
[    0.507161] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.507578] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.509073] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.510743] ACPI: Interpreter enabled
[    0.511253] ACPI: PM: (supports S0 S3 S5)
[    0.511579] ACPI: Using IOAPIC for interrupt routing
[    0.512232] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.512577] PCI: Using E820 reservations for host bridge windows
[    0.513405] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.515238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.515586] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.516622] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.517472] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.517634] PCI host bridge to bus 0000:00
[    0.518162] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.518578] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.519434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.519578] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.520519] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.520577] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.521548] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.521682] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.523028] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.524586] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.526335] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.529580] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.531579] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.533160] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.534463] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.538388] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.539949] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.542165] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.544595] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.546450] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.548611] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.549611] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.551337] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.552580] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.554174] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.558585] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.562594] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.566468] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.567868] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.571463] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.572851] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.576524] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.577928] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.579251] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.583729] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.585219] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.585976] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.592109] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.593581] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.596141] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.599506] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.601400] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.601713] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.602705] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.603667] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.604538] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.604652] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.605664] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.606505] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.606610] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.607411] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.607586] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.608356] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.608587] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.609365] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.609587] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.610366] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.611091] SCSI subsystem initialized
[    0.611701] ACPI: bus type USB registered
[    0.612191] usbcore: registered new interface driver usbfs
[    0.612595] usbcore: registered new interface driver hub
[    0.613276] usbcore: registered new device driver usb
[    0.613600] pps_core: LinuxPPS API ver. 1 registered
[    0.614244] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.614581] PTP clock support registered
[    0.615124] Bluetooth: Core ver 2.22
[    0.615590] NET: Registered PF_BLUETOOTH protocol family
[    0.616278] Bluetooth: HCI device and connection manager initialized
[    0.616585] Bluetooth: HCI socket layer initialized
[    0.617583] Bluetooth: L2CAP socket layer initialized
[    0.618287] Bluetooth: SCO socket layer initialized
[    0.618663] PCI: Using ACPI for IRQ routing
[    0.679052] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.679464] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.679575] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.679586] vgaarb: loaded
[    0.680006] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.680579] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.685712] clocksource: Switched to clocksource kvm-clock
[    0.686540] pnp: PnP ACPI init
[    0.687158] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.688340] pnp: PnP ACPI: found 6 devices
[    0.695853] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.697107] NET: Registered PF_INET protocol family
[    0.762211] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.763603] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.764704] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.765692] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.766673] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.767640] TCP: Hash tables configured (established 4096 bind 4096)
[    0.768489] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.769318] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.770249] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.771296] RPC: Registered named UNIX socket transport module.
[    0.772096] RPC: Registered udp transport module.
[    0.772727] RPC: Registered tcp transport module.
[    0.773341] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.774196] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.775020] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.775818] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.776727] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.777597] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.778611] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.779833] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.782163] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.783568] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.784983] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.786420] PCI: CLS 0 bytes, default 64
[    0.803778] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.804969] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.807802] Initialise system trusted keyrings
[    0.808551] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.810804] NFS: Registering the id_resolver key type
[    0.811489] Key type id_resolver registered
[    0.812033] Key type id_legacy registered
[    0.813079] Key type cifs.idmap registered
[    0.822508] xor: automatically using best checksumming function   avx       
[    0.824562] Key type asymmetric registered
[    0.825121] Asymmetric key parser 'x509' registered
[    0.825781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.826746] io scheduler mq-deadline registered
[    0.827326] io scheduler kyber registered
[    0.828319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.832683] ACPI: button: Power Button [PWRF]
[    0.833846] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.835772] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.837546] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.839497] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.841800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.843254] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.845067] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.846792] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.849330] Linux agpgart interface v0.103
[    0.850076] ACPI: bus type drm_connector registered
[    0.850856] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.851563] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.861515] Console: switching to colour dummy device 80x25
[    0.862448] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.862450] [drm] features: -context_init
[    0.864499] [drm] number of scanouts: 1
[    0.865013] [drm] number of cap sets: 0
[    0.865934] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.914239] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.931262] Console: switching to colour frame buffer device 160x50
[    0.946715] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.949994] brd: module loaded
[    0.951718] loop: module loaded
[    0.952330] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.954495] virtio_blk virtio3: [vda] 911436 512-byte logical blocks (467 MB/445 MiB)
[    0.984998] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.986348] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.988156] scsi host0: ahci
[    0.988812] scsi host1: ahci
[    0.989493] scsi host2: ahci
[    0.990092] scsi host3: ahci
[    0.990718] scsi host4: ahci
[    0.991290] scsi host5: ahci
[    0.991745] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.992729] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.993708] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.994676] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.995681] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.996630] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.999895] e100: Intel(R) PRO/100 Network Driver
[    1.000569] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.001306] e1000: Intel(R) PRO/1000 Network Driver
[    1.001959] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.002705] e1000e: Intel(R) PRO/1000 Network Driver
[    1.003347] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.004127] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.004822] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.005740] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.006636] ehci-pci: EHCI PCI platform driver
[    1.007975] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.008674] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.009916] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    1.017723] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.018773] hub 1-0:1.0: USB hub found
[    1.019373] hub 1-0:1.0: 6 ports detected
[    1.020133] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.020967] ohci-pci: OHCI PCI platform driver
[    1.021590] uhci_hcd: USB Universal Host Controller Interface driver
[    1.023144] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.023850] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.024922] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    1.025914] hub 2-0:1.0: USB hub found
[    1.026434] hub 2-0:1.0: 2 ports detected
[    1.027792] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.028849] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.030179] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.031171] hub 3-0:1.0: USB hub found
[    1.031694] hub 3-0:1.0: 2 ports detected
[    1.032931] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.033662] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.034856] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.035881] hub 4-0:1.0: USB hub found
[    1.036392] hub 4-0:1.0: 2 ports detected
[    1.037154] usbcore: registered new interface driver usb-storage
[    1.038036] usbcore: registered new interface driver usbserial_generic
[    1.038959] usbserial: USB Serial support registered for generic
[    1.039957] usbcore: registered new interface driver ftdi_sio
[    1.040838] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.041821] usbcore: registered new interface driver pl2303
[    1.042534] usbserial: USB Serial support registered for pl2303
[    1.043481] i8042: PNP: No PS/2 controller found.
[    1.044601] mousedev: PS/2 mouse device common for all mice
[    1.046028] rtc_cmos 00:04: RTC can wake from S4
[    1.047566] rtc_cmos 00:04: registered as rtc0
[    1.048587] rtc_cmos 00:04: setting system clock to 2023-01-17T14:16:38 UTC (1673964998)
[    1.050378] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.052299] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.053595] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    1.054763] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.056658] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    1.058556] intel_pstate: CPU model not supported
[    1.059550] sdhci: Secure Digital Host Controller Interface driver
[    1.060791] sdhci: Copyright(c) Pierre Ossman
[    1.061714] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.063059] usbcore: registered new interface driver usbhid
[    1.064202] usbhid: USB HID core driver
[    1.065047] u32 classifier
[    1.065625]     input device check on
[    1.066363]     Actions configured
[    1.067235] NET: Registered PF_INET6 protocol family
[    1.098114] Segment Routing with IPv6
[    1.098684] In-situ OAM (IOAM) with IPv6
[    1.099231] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.100122] NET: Registered PF_PACKET protocol family
[    1.100817] Bridge firewalling registered
[    1.101385] Key type dns_resolver registered
[    1.102061] NET: Registered PF_VSOCK protocol family
[    1.103132] IPI shorthand broadcast: enabled
[    1.103736] sched_clock: Marking stable (1001610897, 102087847)->(1194621657, -90922913)
[    1.104947] Loading compiled-in X.509 certificates
[    1.105750] Key type ._fscrypt registered
[    1.106288] Key type .fscrypt registered
[    1.106799] Key type fscrypt-provisioning registered
[    1.107726] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    1.109127] Key type encrypted registered
[    1.111279] printk: console [netcon0] enabled
[    1.111867] netconsole: network logging started
[    1.258644] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.311280] ata1: SATA link down (SStatus 0 SControl 300)
[    1.312221] ata6: SATA link down (SStatus 0 SControl 300)
[    1.313136] ata5: SATA link down (SStatus 0 SControl 300)
[    1.314029] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.315092] ata4: SATA link down (SStatus 0 SControl 300)
[    1.315951] ata2: SATA link down (SStatus 0 SControl 300)
[    1.316747] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.317537] ata3.00: applying bridge limits
[    1.318289] ata3.00: configured for UDMA/100
[    1.319280] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.355012] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.355945] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.395408] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.397058] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.404336] IP-Config: Complete:
[    1.405128]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.407148]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.408321]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.408325]      nameserver0=8.8.8.8
[    1.411202] md: Waiting for all devices to be available before autodetect
[    1.411838] md: If you don't use raid, use raid=noautodetect
[    1.412349] md: Autodetecting RAID arrays.
[    1.412732] md: autorun ...
[    1.413020] md: ... autorun DONE.
[    1.414730] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.415517] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.416166] devtmpfs: mounted
[    1.417751] Freeing unused kernel image (initmem) memory: 1936K
[    1.425660] Write protecting the kernel read-only data: 22528k
[    1.427277] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.428066] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.428716] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.512483] udevd[172]: starting version 3.2.11
[    1.512648] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.523607] udevd[173]: starting eudev-3.2.11
[    1.652775] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.706831] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.771573] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
[    2.042829] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC7zR3+nbw04hXjDUcojqUsmo9GctFsUHUTy7lHx4T2ziLAAw9es1BqAD3u/bo+VYVsOSKl5TybcwD+jvCAFbKLb6kQFiHzuMdrG5DIeEscbxL2nWWPwc/+EanInFPiQ+c586zQpRN0fBAzu0hciDsk+Khw2UwVvpHCnDHS3VSPVu1u+W1uo9em4PIflHy7mtZItyq5Q8tvFN+BIL7J+rsvLDaE1yG27gxZAZ0fa8xIfFAgTzyTWvG2dYPTO1UjaAmAHb4auqcM6GSEPj5DEsYKSJUbpm71g8uW5fNwZGdVwDav2TsmVLZ9OjFdZxOOGiPkZ+wKqzBUiMejVvutcIHb root@qemux86-64
Fingerprint: SHA256:NY5TDm1e/5tJCfGDLLEOK4ZZDCifrhS3CMvbwSTupRE

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 17 14:16:39 2023
dropbear.
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    2.331715] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.332596] Bluetooth: BNEP filters: protocol multicast
[    2.333346] Bluetooth: BNEP socket layer initialized
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1.2 qemux86-64 /dev/ttyS0

qemux86-64 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-wDNaoSuIaE,guid=c69b9363950bd283afd5eb3563c6adc7
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[665]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=632 comm="connman-applet")
dbus-daemon[665]: Successfully activated service 'org.a11y.atspi.Registry'
matchbox-wm: X error warning (0x1000003): BadWindow (invalid Window parameter) (opcode: 12)
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0x100000b): BadWindow (invalid Window parameter) (opcode: 12)
