[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 2265501457 cycles [ 0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000013] tsc: Detected 2599.996 MHz processor [ 0.001512] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001560] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009804] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.010030] ACPI: Early table checksum verification disabled [ 0.010051] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS ) [ 0.010062] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010077] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010085] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010090] ACPI: FACS 0x000000001FFE0000 000040 [ 0.010095] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010099] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010104] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010109] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010113] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6] [ 0.010116] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2] [ 0.010117] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.010119] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366] [ 0.010120] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e] [ 0.010122] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da] [ 0.010123] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402] [ 0.010218] Zone ranges: [ 0.010219] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010222] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.010224] Normal empty [ 0.010226] Movable zone start for each node [ 0.010227] Early memory node ranges [ 0.010227] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010230] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.010232] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.072736] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.072769] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.084528] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.085305] ACPI: PM-Timer IO Port: 0x608 [ 0.085325] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.085388] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.085395] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.085398] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.085400] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.085408] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.085410] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.085416] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.085418] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.085427] TSC deadline timer available [ 0.085430] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.085479] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.085481] Booting paravirtualized kernel on KVM [ 0.085490] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.085498] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.086153] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.086220] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.086224] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.086443] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.086514] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.087166] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.089415] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved) [ 0.089530] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.089543] Kernel/User page tables isolation: enabled [ 0.089571] ftrace: allocating 47075 entries in 184 pages [ 0.106251] ftrace: allocated 184 pages with 4 groups [ 0.106382] Dynamic Preempt: full [ 0.106882] rcu: Preemptible hierarchical RCU implementation. [ 0.106884] rcu: RCU event tracing is enabled. [ 0.106885] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.106888] All grace periods are expedited (rcu_expedited). [ 0.106889] Trampoline variant of Tasks RCU enabled. [ 0.106890] Rude variant of Tasks RCU enabled. [ 0.106891] Tracing variant of Tasks RCU enabled. [ 0.106892] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.106894] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.113435] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.113666] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.113801] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.113830] random: crng init done [ 0.123625] Console: colour VGA+ 80x25 [ 0.261779] printk: console [ttyS0] enabled [ 0.262566] ACPI: Core revision 20220331 [ 0.263572] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.265506] APIC: Switch to symmetric I/O mode setup [ 0.266818] x2apic enabled [ 0.267757] Switched APIC routing to physical x2apic. [ 0.270305] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.271571] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.273558] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.274567] pid_max: default: 32768 minimum: 301 [ 0.275611] LSM: Security Framework initializing [ 0.276584] landlock: Up and running. [ 0.278562] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.279566] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.281060] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.281556] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.281569] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.282563] Spectre V2 : Mitigation: Retpolines [ 0.283560] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.284560] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.285561] Speculative Store Bypass: Vulnerable [ 0.286575] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.287559] MMIO Stale Data: Unknown: No mitigations [ 0.288560] SRBDS: Unknown: Dependent on hypervisor status [ 0.315820] Freeing SMP alternatives memory: 52K [ 0.316785] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.317840] cblist_init_generic: Setting adjustable number of callback queues. [ 0.318566] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.319650] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.320633] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.321634] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.322691] rcu: Hierarchical SRCU implementation. [ 0.323568] rcu: Max phase no-delay instances is 400. [ 0.324988] smp: Bringing up secondary CPUs ... [ 0.325831] x86: Booting SMP configuration: [ 0.326572] .... node #0, CPUs: #1 #2 #3 [ 0.327960] smp: Brought up 1 node, 4 CPUs [ 0.329313] smpboot: Max logical packages: 1 [ 0.329565] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.331686] devtmpfs: initialized [ 0.332898] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.333598] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.334645] pinctrl core: initialized pinctrl subsystem [ 0.336980] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.337878] thermal_sys: Registered thermal governor 'step_wise' [ 0.337883] thermal_sys: Registered thermal governor 'user_space' [ 0.338656] cpuidle: using governor menu [ 0.339556] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.339556] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.339556] PCI: Using configuration type 1 for base access [ 0.347016] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.380564] raid6: sse2x4 gen() 8307 MB/s [ 0.397562] raid6: sse2x2 gen() 8302 MB/s [ 0.414563] raid6: sse2x1 gen() 7076 MB/s [ 0.415569] raid6: using algorithm sse2x4 gen() 8307 MB/s [ 0.433561] raid6: .... xor() 4609 MB/s, rmw enabled [ 0.434568] raid6: using ssse3x2 recovery algorithm [ 0.435688] ACPI: Added _OSI(Module Device) [ 0.436565] ACPI: Added _OSI(Processor Device) [ 0.437443] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.437563] ACPI: Added _OSI(Processor Aggregator Device) [ 0.438565] ACPI: Added _OSI(Linux-Dell-Video) [ 0.439441] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.439564] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.442032] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.443894] ACPI: Interpreter enabled [ 0.444587] ACPI: PM: (supports S0 S3 S5) [ 0.445355] ACPI: Using IOAPIC for interrupt routing [ 0.445635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.446564] PCI: Using E820 reservations for host bridge windows [ 0.447752] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.451855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.452578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.453676] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.454688] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.455677] PCI host bridge to bus 0000:00 [ 0.456485] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.456569] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.457566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.458564] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.459564] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.460569] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.461569] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.462700] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.464464] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.466489] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.467563] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.472348] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.473570] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.475728] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.478570] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.485180] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.487422] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.489244] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.491587] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.493593] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff] [ 0.499613] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.500754] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.502632] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.505454] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.507464] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.510573] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.513791] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.517565] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.519762] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.523438] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.524850] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.528125] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.529980] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.531236] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.535825] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.537182] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.537962] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.542554] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.544566] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.546992] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.550120] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.553333] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.553677] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.554671] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.555666] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.556664] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.557666] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.558669] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.559664] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.560606] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.561578] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.562576] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.563576] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.564576] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.565576] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.566576] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.567575] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.569268] SCSI subsystem initialized [ 0.569674] ACPI: bus type USB registered [ 0.570584] usbcore: registered new interface driver usbfs [ 0.571564] usbcore: registered new interface driver hub [ 0.572511] usbcore: registered new device driver usb [ 0.572601] pps_core: LinuxPPS API ver. 1 registered [ 0.573470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.573579] PTP clock support registered [ 0.575029] Bluetooth: Core ver 2.22 [ 0.575579] NET: Registered PF_BLUETOOTH protocol family [ 0.576508] Bluetooth: HCI device and connection manager initialized [ 0.576586] Bluetooth: HCI socket layer initialized [ 0.577435] Bluetooth: L2CAP socket layer initialized [ 0.577587] Bluetooth: SCO socket layer initialized [ 0.578610] PCI: Using ACPI for IRQ routing [ 0.658431] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.658433] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.658556] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.658568] vgaarb: loaded [ 0.659003] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.659560] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.663849] clocksource: Switched to clocksource kvm-clock [ 0.664888] pnp: PnP ACPI init [ 0.665483] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.666874] pnp: PnP ACPI: found 6 devices [ 0.675793] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.677701] NET: Registered PF_INET protocol family [ 0.678750] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.680217] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.681913] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.683392] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.684869] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.686248] TCP: Hash tables configured (established 4096 bind 4096) [ 0.688163] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.689456] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.692411] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.706767] RPC: Registered named UNIX socket transport module. [ 0.707866] RPC: Registered udp transport module. [ 0.708752] RPC: Registered tcp transport module. [ 0.709587] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.710577] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.711389] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.712211] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.713139] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.714049] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.715031] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.716292] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.717803] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.719205] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.722532] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.724535] PCI: CLS 0 bytes, default 64 [ 0.725446] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.733900] Initialise system trusted keyrings [ 0.735097] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.738054] NFS: Registering the id_resolver key type [ 0.747036] Key type id_resolver registered [ 0.747918] Key type id_legacy registered [ 0.749755] Key type cifs.idmap registered [ 0.759465] xor: automatically using best checksumming function avx [ 0.760910] Key type asymmetric registered [ 0.761742] Asymmetric key parser 'x509' registered [ 0.762780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.764243] io scheduler mq-deadline registered [ 0.765138] io scheduler kyber registered [ 0.766704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.771758] ACPI: button: Power Button [PWRF] [ 0.773401] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.775884] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.778099] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.780390] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.782520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.785354] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.787143] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.788932] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.791729] Linux agpgart interface v0.103 [ 0.792826] ACPI: bus type drm_connector registered [ 0.794044] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.795135] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.807120] Console: switching to colour dummy device 80x25 [ 0.808581] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.808584] [drm] features: -context_init [ 0.811433] [drm] number of scanouts: 1 [ 0.812201] [drm] number of cap sets: 0 [ 0.813568] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.821257] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.839205] Console: switching to colour frame buffer device 160x50 [ 0.868060] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.873100] brd: module loaded [ 0.875169] loop: module loaded [ 0.875947] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.878512] virtio_blk virtio3: [vda] 1072296 512-byte logical blocks (549 MB/524 MiB) [ 0.883316] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.885041] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.887828] scsi host0: ahci [ 0.888799] scsi host1: ahci [ 0.889509] scsi host2: ahci [ 0.890440] scsi host3: ahci [ 0.891583] scsi host4: ahci [ 0.892478] scsi host5: ahci [ 0.893179] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32 [ 0.894701] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32 [ 0.896223] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32 [ 0.897770] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32 [ 0.899294] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32 [ 0.900859] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32 [ 0.904816] e100: Intel(R) PRO/100 Network Driver [ 0.905777] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.906865] e1000: Intel(R) PRO/1000 Network Driver [ 0.907790] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.908994] e1000e: Intel(R) PRO/1000 Network Driver [ 0.909928] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.911152] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.912201] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.913355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.914710] ehci-pci: EHCI PCI platform driver [ 0.916714] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.917765] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.919624] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000 [ 0.927731] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.929334] hub 1-0:1.0: USB hub found [ 0.930148] hub 1-0:1.0: 6 ports detected [ 0.931349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.932586] ohci-pci: OHCI PCI platform driver [ 0.933514] uhci_hcd: USB Universal Host Controller Interface driver [ 0.936099] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.937167] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.938882] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.940530] hub 2-0:1.0: USB hub found [ 0.941373] hub 2-0:1.0: 2 ports detected [ 0.943469] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.944598] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.946441] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.948688] hub 3-0:1.0: USB hub found [ 0.949485] hub 3-0:1.0: 2 ports detected [ 0.951414] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.952601] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.953959] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.955477] hub 4-0:1.0: USB hub found [ 0.956298] hub 4-0:1.0: 2 ports detected [ 0.957378] usbcore: registered new interface driver usb-storage [ 0.958706] usbcore: registered new interface driver usbserial_generic [ 0.960204] usbserial: USB Serial support registered for generic [ 0.961435] usbcore: registered new interface driver ftdi_sio [ 0.962588] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.964068] usbcore: registered new interface driver pl2303 [ 0.965181] usbserial: USB Serial support registered for pl2303 [ 0.966395] i8042: PNP: No PS/2 controller found. [ 0.967523] mousedev: PS/2 mouse device common for all mice [ 0.969050] rtc_cmos 00:04: RTC can wake from S4 [ 0.970646] rtc_cmos 00:04: registered as rtc0 [ 0.971637] rtc_cmos 00:04: setting system clock to 2023-01-19T18:12:20 UTC (1674151940) [ 0.973356] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.975291] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.976591] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.977702] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.979678] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.981529] intel_pstate: CPU model not supported [ 0.982518] sdhci: Secure Digital Host Controller Interface driver [ 0.983727] sdhci: Copyright(c) Pierre Ossman [ 0.984630] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.985914] usbcore: registered new interface driver usbhid [ 0.987097] usbhid: USB HID core driver [ 0.987919] u32 classifier [ 0.988465] input device check on [ 0.989200] Actions configured [ 0.990090] NET: Registered PF_INET6 protocol family [ 0.991773] Segment Routing with IPv6 [ 0.992522] In-situ OAM (IOAM) with IPv6 [ 0.993332] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.994716] NET: Registered PF_PACKET protocol family [ 0.995772] Bridge firewalling registered [ 1.004816] Key type dns_resolver registered [ 1.005665] NET: Registered PF_VSOCK protocol family [ 1.007209] IPI shorthand broadcast: enabled [ 1.008057] sched_clock: Marking stable (853136599, 154879499)->(1186125712, -178109614) [ 1.009843] Loading compiled-in X.509 certificates [ 1.011099] Key type ._fscrypt registered [ 1.011925] Key type .fscrypt registered [ 1.012688] Key type fscrypt-provisioning registered [ 1.014061] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.016296] Key type encrypted registered [ 1.033419] printk: console [netcon0] enabled [ 1.034437] netconsole: network logging started [ 1.186346] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.209725] ata6: SATA link down (SStatus 0 SControl 300) [ 1.210929] ata2: SATA link down (SStatus 0 SControl 300) [ 1.213744] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.215282] ata5: SATA link down (SStatus 0 SControl 300) [ 1.216400] ata4: SATA link down (SStatus 0 SControl 300) [ 1.217834] ata1: SATA link down (SStatus 0 SControl 300) [ 1.219008] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.220164] ata3.00: applying bridge limits [ 1.221285] ata3.00: configured for UDMA/100 [ 1.224051] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.261244] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.262643] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.293651] IP-Config: Complete: [ 1.294396] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.296333] host=192.168.7.2, domain=, nis-domain=(none) [ 1.297454] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.297458] nameserver0=8.8.8.8 [ 1.300289] md: Waiting for all devices to be available before autodetect [ 1.301262] md: If you don't use raid, use raid=noautodetect [ 1.302147] md: Autodetecting RAID arrays. [ 1.302975] md: autorun ... [ 1.303421] md: ... autorun DONE. [ 1.305956] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.307202] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.308334] devtmpfs: mounted [ 1.310920] Freeing unused kernel image (initmem) memory: 1936K [ 1.312646] Write protecting the kernel read-only data: 22528k [ 1.315462] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.316652] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.317831] Run /sbin/init as init process [ 1.323238] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.324718] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev /etc/rcS.d/S03systemd-udevd: line 76: /proc/sys/kernel/hotplug: No such file or directory [ 1.443584] usb 1-2: new high-speed USB device number 3 using ehci-pci Starting version 251.8+ [ 1.576636] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.634869] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.728007] EXT4-fs (vda): re-mounted. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists [ 1.964605] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 19 18:12:21 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDFi/1ebw4lEGE8SBA5Eb6xe1N4YNK71o9FU8aiLYOWdUmzD48tTZPpKHP+GgilELFXqBKsI3pc/6n9FGcQXjo7am4XjYtde7BAfQw0EaQtJ4mwF/CuAjMae4Hmt/dqJGs3Axx9dGr3/Bw+8iNBfKosT8beTTVlRB3Pg/ir8uZaHV5PpDUy7UyjnTWCKDlYsRCBYbgJVBWL5gb2NeioZSxeH4yQl9BD3aPrP6ITlHHUoSbE94HG6iPAJA3rcUmNo6Ifxzk0/ZwcDkcH9PEbjHlOiK7P6ciE7tn1ePSb4UGA86OgAMo7M9xAzV+g6L1FBz9MrI0cVFguI0c8e9y4sWN/ root@qemux86-64 Fingerprint: SHA256:wFXlHR0vIsBFlGs5vIKUE/NGbad24j4460ivhj1JzRE dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ 2.814026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.814870] Bluetooth: BNEP filters: protocol multicast [ 2.815588] Bluetooth: BNEP socket layer initialized D-BUS per-session daemon address is: unix:path=/tmp/dbus-xrJQbHDoAF,guid=6be2d79c9966e9b4e2d89eee63c98806 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu ...done. libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu Starting Telephony daemon libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu [settings daemon] Forking. run with -n to prevent fork libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu dbus-daemon[443]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=447 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[443]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Poky (Yocto Project Reference Distro) 4.1.2 qemux86-64 /dev/ttyS0 qemux86-64 login: (connman-applet:428): Gdk-[1;35mCRITICAL[0m **: [34m18:12:23.032[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed