[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.12::192.168.7.11:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467506853 ns
[    0.000209] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884839421ns
[    0.008110] Console: colour dummy device 80x25
[    0.011206] printk: console [tty0] enabled
[    0.011907] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.12::192.168.7.11:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467506853 ns
[    0.000209] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884839421ns
[    0.008110] Console: colour dummy device 80x25
[    0.011206] printk: console [tty0] enabled
[    0.011907] printk: bootconsole [uart8250] disabled
[    0.013813] Calibrating delay loop... 1024.81 BogoMIPS (lpj=5124096)
[    0.102332] pid_max: default: 32768 minimum: 301
[    0.103436] LSM: Security Framework initializing
[    0.104543] landlock: Up and running.
[    0.107833] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.107991] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.241660] cblist_init_generic: Setting adjustable number of callback queues.
[    0.241900] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.242383] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.243177] Performance counters: No available PMU.
[    0.244229] rcu: Hierarchical SRCU implementation.
[    0.244302] rcu: 	Max phase no-delay instances is 1000.
[    0.252757] smp: Bringing up secondary CPUs ...
[    0.252917] smp: Brought up 1 node, 1 CPU
[    0.266933] devtmpfs: initialized
[    0.275409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.275911] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.288201] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.768835] raid6: int32x8  gen()   218 MB/s
[    1.115887] raid6: int32x4  gen()   565 MB/s
[    1.460288] raid6: int32x2  gen()   629 MB/s
[    1.623796] raid6: int32x1  gen()   502 MB/s
[    1.623957] raid6: using algorithm int32x2 gen() 629 MB/s
[    1.795518] raid6: .... xor() 365 MB/s, rmw enabled
[    1.795700] raid6: using intx1 recovery algorithm
[    1.798736] SCSI subsystem initialized
[    1.799415] usbcore: registered new interface driver usbfs
[    1.799782] usbcore: registered new interface driver hub
[    1.800028] usbcore: registered new device driver usb
[    1.800473] pps_core: LinuxPPS API ver. 1 registered
[    1.800548] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.800721] PTP clock support registered
[    1.818714] PCI host bridge to bus 0000:00
[    1.819129] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.819752] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.819938] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.821539] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.822347] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.822454] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.822547] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.822628] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.822720] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.862537] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.863400] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.863706] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.863860] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.863948] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.864051] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.864133] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.864560] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.864683] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.865283] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.865806] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.865969] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.866529] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.866623] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.866771] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.866859] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.867356] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.867461] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.867640] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.867788] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.868165] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.868262] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.868358] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.868755] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.868850] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.868946] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.869689] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.871141] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.871494] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.871648] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.871768] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.871932] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.872038] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.872164] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.872432] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.872543] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.872617] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.872697] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.872776] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.874736] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.874882] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.874998] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.875130] vgaarb: loaded
[    1.877410] clocksource: Switched to clocksource MIPS
[    2.136567] NET: Registered PF_INET protocol family
[    2.138102] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.147338] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.147566] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.147707] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.147972] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    2.148161] TCP: Hash tables configured (established 2048 bind 2048)
[    2.149394] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.149712] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.151484] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.154901] RPC: Registered named UNIX socket transport module.
[    2.155013] RPC: Registered udp transport module.
[    2.155072] RPC: Registered tcp transport module.
[    2.155124] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.155900] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.156783] PCI: CLS 0 bytes, default 16
[    2.182113] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.198709] NFS: Registering the id_resolver key type
[    2.200090] Key type id_resolver registered
[    2.200188] Key type id_legacy registered
[    2.203198] Key type cifs.idmap registered
[    2.346622] xor: measuring software checksum speed
[    2.358710]    8regs           :   860 MB/sec
[    2.371448]    8regs_prefetch  :   814 MB/sec
[    2.383201]    32regs          :   858 MB/sec
[    2.395471]    32regs_prefetch :   822 MB/sec
[    2.395610] xor: using function: 8regs (860 MB/sec)
[    2.396387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.396617] io scheduler mq-deadline registered
[    2.396752] io scheduler kyber registered
[    2.403913] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.410757] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.411825] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.414197] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.420473] printk: console [ttyS0] disabled
[    2.444557] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.444732] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.471773] printk: console [ttyS0] enabled
[    2.494525] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.494876] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.495507] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.523569] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    2.525661] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.526646] [drm] Found bochs VGA, ID 0xb0c5.
[    2.527809] random: crng init done
[    2.528090] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.531784] [drm] Found EDID data blob.
[    2.538333] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.691447] Console: switching to colour frame buffer device 160x50
[    2.713028] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.750027] brd: module loaded
[    2.751204] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    2.756766] virtio_blk virtio2: [vda] 40114 512-byte logical blocks (20.5 MB/19.6 MiB)
[    2.817639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.818348] ehci-pci: EHCI PCI platform driver
[    2.818998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.819581] ohci-pci: OHCI PCI platform driver
[    2.820226] uhci_hcd: USB Universal Host Controller Interface driver
[    2.822033] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    2.823580] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    2.830784] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    2.840147] hub 1-0:1.0: USB hub found
[    2.843713] hub 1-0:1.0: 2 ports detected
[    2.853547] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.855072] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.860198] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.863937] usbcore: registered new interface driver usbhid
[    2.864442] usbhid: USB HID core driver
[    2.865378] u32 classifier
[    2.865717]     input device check on
[    2.866094]     Actions configured
[    2.897530] NET: Registered PF_INET6 protocol family
[    2.908231] Segment Routing with IPv6
[    2.908887] In-situ OAM (IOAM) with IPv6
[    2.917871] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.925755] NET: Registered PF_PACKET protocol family
[    2.947570] Bridge firewalling registered
[    2.958278] Key type dns_resolver registered
[    2.971116] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.977672] NET: Registered PF_VSOCK protocol family
[    2.997721] Key type ._fscrypt registered
[    3.018429] Key type .fscrypt registered
[    3.023502] Key type fscrypt-provisioning registered
[    3.043030] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.088981] Key type encrypted registered
[    3.114485] printk: console [netcon0] enabled
[    3.124644] netconsole: network logging started
[    3.167255] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.431845] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.438321] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    3.638706] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.717411] IP-Config: Complete:
[    3.726990]      device=eth0, hwaddr=52:54:00:12:34:0c, ipaddr=192.168.7.12, mask=255.255.255.0, gw=192.168.7.11
[    3.731992]      host=192.168.7.12, domain=, nis-domain=(none)
[    3.736556]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.736617]      nameserver0=8.8.8.8
[    3.767966] md: Waiting for all devices to be available before autodetect
[    3.777098] md: If you don't use raid, use raid=noautodetect
[    3.781869] md: Autodetecting RAID arrays.
[    3.796250] md: autorun ...
[    3.805793] md: ... autorun DONE.
[    3.869367] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    3.877453] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.894961] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.903465] devtmpfs: mounted
[    3.981321] Freeing unused kernel image (initmem) memory: 424K
[    3.986994] This architecture does not have kernel memory protection.
[    3.991977] Run /sbin/init as init process
[    4.024556] process '/sbin/init.sysvinit' started with executable stack
[    6.222497] udevd[112]: starting version 3.2.11
[    6.343149] udevd[113]: starting eudev-3.2.11
[    7.689381] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.1 qemumips /dev/ttyS0

qemumips login: 