[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000ad3a5f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a60-0x0000000000ad3a8f] usable [ 0.000000] reserve setup_data: [mem 0x0000000000ad3a90-0x000000001ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 2873283358 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000013] tsc: Detected 2599.996 MHz processor [ 0.001674] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001731] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.011165] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.011390] ACPI: Early table checksum verification disabled [ 0.011413] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.011423] ACPI: RSDT 0x000000001FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011440] ACPI: FACP 0x000000001FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011450] ACPI: DSDT 0x000000001FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011456] ACPI: FACS 0x000000001FFE0000 000040 [ 0.011461] ACPI: APIC 0x000000001FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011467] ACPI: HPET 0x000000001FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011473] ACPI: MCFG 0x000000001FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011478] ACPI: WAET 0x000000001FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011483] ACPI: Reserving FACP table memory at [mem 0x1ffe21ec-0x1ffe22df] [ 0.011485] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21eb] [ 0.011487] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.011488] ACPI: Reserving APIC table memory at [mem 0x1ffe22e0-0x1ffe236f] [ 0.011490] ACPI: Reserving HPET table memory at [mem 0x1ffe2370-0x1ffe23a7] [ 0.011492] ACPI: Reserving MCFG table memory at [mem 0x1ffe23a8-0x1ffe23e3] [ 0.011493] ACPI: Reserving WAET table memory at [mem 0x1ffe23e4-0x1ffe240b] [ 0.014582] Zone ranges: [ 0.014587] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.014591] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.014594] Normal empty [ 0.014595] Movable zone start for each node [ 0.014596] Early memory node ranges [ 0.014597] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.014599] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.014601] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.015160] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.015187] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.017578] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.018260] ACPI: PM-Timer IO Port: 0x608 [ 0.018278] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.018338] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.018345] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.018347] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.018350] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.018359] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.018361] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.018368] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.018370] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.018376] TSC deadline timer available [ 0.018378] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.018423] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.018425] Booting paravirtualized kernel on KVM [ 0.018433] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.018439] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.019203] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.019266] Built 1 zonelists, mobility grouping on. Total pages: 128727 [ 0.019269] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.019433] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.019481] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.020234] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.022293] Memory: 482196K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41280K reserved, 0K cma-reserved) [ 0.022394] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.022406] Kernel/User page tables isolation: enabled [ 0.022429] ftrace: allocating 47075 entries in 184 pages [ 0.036951] ftrace: allocated 184 pages with 4 groups [ 0.037052] Dynamic Preempt: full [ 0.037637] rcu: Preemptible hierarchical RCU implementation. [ 0.037639] rcu: RCU event tracing is enabled. [ 0.037640] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.037643] All grace periods are expedited (rcu_expedited). [ 0.037643] Trampoline variant of Tasks RCU enabled. [ 0.037644] Rude variant of Tasks RCU enabled. [ 0.037645] Tracing variant of Tasks RCU enabled. [ 0.037647] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.037648] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.044451] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.044673] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.044816] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.044843] random: crng init done [ 0.054280] Console: colour VGA+ 80x25 [ 0.192207] printk: console [ttyS0] enabled [ 0.193205] ACPI: Core revision 20220331 [ 0.194387] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.196688] APIC: Switch to symmetric I/O mode setup [ 0.199414] x2apic enabled [ 0.200583] Switched APIC routing to physical x2apic. [ 0.203437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.204976] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.207588] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.208592] pid_max: default: 32768 minimum: 301 [ 0.209631] LSM: Security Framework initializing [ 0.210604] landlock: Up and running. [ 0.212172] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.212594] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.214030] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.214594] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.215592] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.216593] Spectre V2 : Mitigation: Retpolines [ 0.217591] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.218591] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.219591] Speculative Store Bypass: Vulnerable [ 0.220605] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.221594] MMIO Stale Data: Unknown: No mitigations [ 0.222591] SRBDS: Unknown: Dependent on hypervisor status [ 0.247919] Freeing SMP alternatives memory: 52K [ 0.248786] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.249847] cblist_init_generic: Setting adjustable number of callback queues. [ 0.250592] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.251637] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.252630] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.253628] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.254667] rcu: Hierarchical SRCU implementation. [ 0.255593] rcu: Max phase no-delay instances is 400. [ 0.256965] smp: Bringing up secondary CPUs ... [ 0.257769] x86: Booting SMP configuration: [ 0.258596] .... node #0, CPUs: #1 #2 #3 [ 0.259889] smp: Brought up 1 node, 4 CPUs [ 0.261587] smpboot: Max logical packages: 1 [ 0.262593] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.263965] devtmpfs: initialized [ 0.264806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.265609] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.266642] pinctrl core: initialized pinctrl subsystem [ 0.268586] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.269831] thermal_sys: Registered thermal governor 'step_wise' [ 0.269834] thermal_sys: Registered thermal governor 'user_space' [ 0.270659] cpuidle: using governor menu [ 0.272641] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.274598] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.275618] PCI: Using configuration type 1 for base access [ 0.279921] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.297592] raid6: sse2x4 gen() 15156 MB/s [ 0.315591] raid6: sse2x2 gen() 15785 MB/s [ 0.333590] raid6: sse2x1 gen() 11775 MB/s [ 0.334593] raid6: using algorithm sse2x2 gen() 15785 MB/s [ 0.352602] raid6: .... xor() 9270 MB/s, rmw enabled [ 0.353598] raid6: using ssse3x2 recovery algorithm [ 0.354908] ACPI: Added _OSI(Module Device) [ 0.355594] ACPI: Added _OSI(Processor Device) [ 0.356594] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.357593] ACPI: Added _OSI(Processor Aggregator Device) [ 0.358594] ACPI: Added _OSI(Linux-Dell-Video) [ 0.359593] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.360594] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.362487] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.363770] ACPI: Interpreter enabled [ 0.364623] ACPI: PM: (supports S0 S3 S5) [ 0.365593] ACPI: Using IOAPIC for interrupt routing [ 0.366655] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.367593] PCI: Using E820 reservations for host bridge windows [ 0.368742] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.371480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.371608] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.372637] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.373550] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.373664] PCI host bridge to bus 0000:00 [ 0.374284] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.374591] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.375515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.375591] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.376591] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.377593] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.378592] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.379446] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.380186] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.381593] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.383319] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.387469] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.388592] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.390226] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.391592] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.393592] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.397162] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.399900] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.401608] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.404178] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.405605] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.409132] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.409688] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.411436] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.412592] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.414130] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.418593] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.422384] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.424503] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.425521] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.427394] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.428491] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.430535] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.431806] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.433779] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.436789] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.438072] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.438859] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.444593] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.446063] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.447739] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.450502] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.451772] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.452676] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.453675] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.454548] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.454670] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.455541] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.455669] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.456621] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.457468] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.457600] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.458383] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.458599] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.459379] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.459599] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.460422] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.460600] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.461909] SCSI subsystem initialized [ 0.462644] ACPI: bus type USB registered [ 0.463234] usbcore: registered new interface driver usbfs [ 0.463604] usbcore: registered new interface driver hub [ 0.464301] usbcore: registered new device driver usb [ 0.464608] pps_core: LinuxPPS API ver. 1 registered [ 0.465270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.465595] PTP clock support registered [ 0.466896] Bluetooth: Core ver 2.22 [ 0.467422] NET: Registered PF_BLUETOOTH protocol family [ 0.467591] Bluetooth: HCI device and connection manager initialized [ 0.468429] Bluetooth: HCI socket layer initialized [ 0.468592] Bluetooth: L2CAP socket layer initialized [ 0.469257] Bluetooth: SCO socket layer initialized [ 0.469661] PCI: Using ACPI for IRQ routing [ 0.532077] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.532478] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.532587] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.532596] vgaarb: loaded [ 0.533024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.533590] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.536670] clocksource: Switched to clocksource kvm-clock [ 0.537535] pnp: PnP ACPI init [ 0.538143] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.539351] pnp: PnP ACPI: found 6 devices [ 0.551693] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.552974] NET: Registered PF_INET protocol family [ 0.553695] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.555104] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.556229] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.557241] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.558295] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.559225] TCP: Hash tables configured (established 4096 bind 4096) [ 0.560097] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.560953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.561924] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.562999] RPC: Registered named UNIX socket transport module. [ 0.563808] RPC: Registered udp transport module. [ 0.564419] RPC: Registered tcp transport module. [ 0.565038] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.565906] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.566706] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.567508] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.568399] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.569301] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.570206] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.571429] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.573005] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.574383] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.575752] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.577111] PCI: CLS 0 bytes, default 64 [ 0.577870] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.579033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.581227] Initialise system trusted keyrings [ 0.582928] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.585141] NFS: Registering the id_resolver key type [ 0.585863] Key type id_resolver registered [ 0.586435] Key type id_legacy registered [ 0.587443] Key type cifs.idmap registered [ 0.597430] xor: automatically using best checksumming function avx [ 0.598433] Key type asymmetric registered [ 0.598971] Asymmetric key parser 'x509' registered [ 0.599649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.600632] io scheduler mq-deadline registered [ 0.601232] io scheduler kyber registered [ 0.602223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.606635] ACPI: button: Power Button [PWRF] [ 0.607838] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.609935] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.611873] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.614974] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.616671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.617680] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.618872] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.620030] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.622348] Linux agpgart interface v0.103 [ 0.623302] ACPI: bus type drm_connector registered [ 0.624120] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.624875] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.634062] Console: switching to colour dummy device 80x25 [ 0.635073] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.635075] [drm] features: -context_init [ 0.637246] [drm] number of scanouts: 1 [ 0.637804] [drm] number of cap sets: 0 [ 0.638760] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.642487] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.666936] Console: switching to colour frame buffer device 160x50 [ 0.687451] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.691850] brd: module loaded [ 0.694047] loop: module loaded [ 0.694836] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.697671] virtio_blk virtio3: [vda] 1093356 512-byte logical blocks (560 MB/534 MiB) [ 0.701499] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.702840] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.705460] scsi host0: ahci [ 0.706275] scsi host1: ahci [ 0.706981] scsi host2: ahci [ 0.707698] scsi host3: ahci [ 0.708459] scsi host4: ahci [ 0.709528] scsi host5: ahci [ 0.710357] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.712058] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.713738] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.715444] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.717140] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.718862] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.723434] e100: Intel(R) PRO/100 Network Driver [ 0.724541] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.725844] e1000: Intel(R) PRO/1000 Network Driver [ 0.727027] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.728353] e1000e: Intel(R) PRO/1000 Network Driver [ 0.729542] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.730966] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.732284] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.733635] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.735197] ehci-pci: EHCI PCI platform driver [ 0.737343] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.738546] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.740536] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.748741] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.750463] hub 1-0:1.0: USB hub found [ 0.751411] hub 1-0:1.0: 6 ports detected [ 0.752746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.754103] ohci-pci: OHCI PCI platform driver [ 0.755113] uhci_hcd: USB Universal Host Controller Interface driver [ 0.757568] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.758595] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.760478] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.762189] hub 2-0:1.0: USB hub found [ 0.763137] hub 2-0:1.0: 2 ports detected [ 0.765320] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.766536] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.768814] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.770473] hub 3-0:1.0: USB hub found [ 0.771388] hub 3-0:1.0: 2 ports detected [ 0.773517] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.775199] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.777023] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.778663] hub 4-0:1.0: USB hub found [ 0.779676] hub 4-0:1.0: 2 ports detected [ 0.780889] usbcore: registered new interface driver usb-storage [ 0.782309] usbcore: registered new interface driver usbserial_generic [ 0.783964] usbserial: USB Serial support registered for generic [ 0.785951] usbcore: registered new interface driver ftdi_sio [ 0.787243] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.788861] usbcore: registered new interface driver pl2303 [ 0.790143] usbserial: USB Serial support registered for pl2303 [ 0.791502] i8042: PNP: No PS/2 controller found. [ 0.792739] mousedev: PS/2 mouse device common for all mice [ 0.794352] rtc_cmos 00:04: RTC can wake from S4 [ 0.796240] rtc_cmos 00:04: registered as rtc0 [ 0.797389] rtc_cmos 00:04: setting system clock to 2023-01-19T17:01:56 UTC (1674147716) [ 0.799273] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.808930] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.810544] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.812028] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.814220] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.816281] intel_pstate: CPU model not supported [ 0.817369] sdhci: Secure Digital Host Controller Interface driver [ 0.819045] sdhci: Copyright(c) Pierre Ossman [ 0.820105] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.821609] usbcore: registered new interface driver usbhid [ 0.822896] usbhid: USB HID core driver [ 0.823851] u32 classifier [ 0.824506] input device check on [ 0.825293] Actions configured [ 0.826282] NET: Registered PF_INET6 protocol family [ 0.828171] Segment Routing with IPv6 [ 0.829050] In-situ OAM (IOAM) with IPv6 [ 0.830008] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.831492] NET: Registered PF_PACKET protocol family [ 0.832682] Bridge firewalling registered [ 0.833688] Key type dns_resolver registered [ 0.834805] NET: Registered PF_VSOCK protocol family [ 0.836439] IPI shorthand broadcast: enabled [ 0.837419] sched_clock: Marking stable (679468268, 157903877)->(916646254, -79274109) [ 0.839462] Loading compiled-in X.509 certificates [ 0.840748] Key type ._fscrypt registered [ 0.841688] Key type .fscrypt registered [ 0.842544] Key type fscrypt-provisioning registered [ 0.844011] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.846202] Key type encrypted registered [ 0.848844] printk: console [netcon0] enabled [ 0.849908] netconsole: network logging started [ 0.995668] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.032829] ata6: SATA link down (SStatus 0 SControl 300) [ 1.034265] ata5: SATA link down (SStatus 0 SControl 300) [ 1.035773] ata1: SATA link down (SStatus 0 SControl 300) [ 1.037149] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.038263] ata4: SATA link down (SStatus 0 SControl 300) [ 1.039705] ata2: SATA link down (SStatus 0 SControl 300) [ 1.040891] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.041677] ata3.00: applying bridge limits [ 1.042432] ata3.00: configured for UDMA/100 [ 1.043439] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.087141] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.088625] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.120640] IP-Config: Complete: [ 1.121392] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.123504] host=192.168.7.2, domain=, nis-domain=(none) [ 1.124737] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.124741] nameserver0=8.8.8.8 [ 1.127712] md: Waiting for all devices to be available before autodetect [ 1.128706] md: If you don't use raid, use raid=noautodetect [ 1.129529] md: Autodetecting RAID arrays. [ 1.130151] md: autorun ... [ 1.130566] md: ... autorun DONE. [ 1.133154] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.134782] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.134888] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.136581] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.137602] devtmpfs: mounted [ 1.141809] Freeing unused kernel image (initmem) memory: 1936K [ 1.142731] Write protecting the kernel read-only data: 22528k [ 1.145669] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.146878] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.147871] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.238947] udevd[172]: starting version 3.2.11 [ 1.252627] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.252897] udevd[173]: starting eudev-3.2.11 [ 1.393500] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.446996] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.515118] EXT4-fs (vda): re-mounted. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: [ 1.770618] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 19 17:01:57 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" D-BUS per-session daemon address is: unix:path=/tmp/dbus-kYKDlxFq5H,guid=2c538f31a8d9030101b3d54963c97785 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[594]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=582 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[594]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (connman-applet:582): Gdk-[1;35mCRITICAL[0m **: [34m17:01:57.906[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCJVujMDkHmqNdawqwZnH70k/sR9TkA0bxkAqiJxW0O68hK+pJmCjJT8nByeuWK/dWZmkfbS7NOsLWYsG6OLAivUD1/FGxonElCR6Irvfg+J/yq51mqH30em6IfOfIXV9RhN7ZVF3k63wH4ixYZnbVYuUJuQWRk1a91NlG/vLb42qTzOXZxyW9UVIYJGorRoxgYFAE1Ai8eWuxVBH/dQhznzH1cyX/bPdwAclg36xFhUt8MXtewtXdOoutEpCIdFWKxFEnibnragKQmLLFQUmcfjbN+5zSYQoYVn105T9nhvHwAltdWlSJYrYJgMpzjW5aKkQzUCpUtsZzgilnvNMXd root@qemux86-64 Fingerprint: SHA256:UJ6weUkNjvusqt5B0RX40BeFGhepps4okwhMoUWRJJM dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 2.639692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.640648] Bluetooth: BNEP filters: protocol multicast [ 2.641400] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.1 qemux86-64 /dev/ttyS0 qemux86-64 login: