[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.36 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466779017 ns
[    0.000389] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884021245ns
[    0.019492] Console: colour dummy device 80x25
[    0.020885] printk: console [tty0] enabled
[    0.030598] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Mon Jan 2 02:58:01 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] percpu: Embedded 16 pages/cpu s35168 r8192 d22176 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239424K/262140K available (13339K kernel code, 1409K rwdata, 3504K rodata, 424K init, 399K bss, 22716K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.36 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466779017 ns
[    0.000389] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884021245ns
[    0.019492] Console: colour dummy device 80x25
[    0.020885] printk: console [tty0] enabled
[    0.030598] printk: bootconsole [uart8250] disabled
[    0.034263] Calibrating delay loop... 910.13 BogoMIPS (lpj=4550656)
[    0.175501] pid_max: default: 32768 minimum: 301
[    0.177645] LSM: Security Framework initializing
[    0.179744] landlock: Up and running.
[    0.186161] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.186507] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.270440] cblist_init_generic: Setting adjustable number of callback queues.
[    0.270852] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.271956] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.273988] Performance counters: No available PMU.
[    0.275860] rcu: Hierarchical SRCU implementation.
[    0.276066] rcu: 	Max phase no-delay instances is 1000.
[    0.291983] smp: Bringing up secondary CPUs ...
[    0.292272] smp: Brought up 1 node, 1 CPU
[    0.315183] devtmpfs: initialized
[    0.329586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.330096] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.348885] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.899008] raid6: int32x8  gen()   109 MB/s
[    1.272624] raid6: int32x4  gen()   290 MB/s
[    1.644399] raid6: int32x2  gen()   415 MB/s
[    1.990302] raid6: int32x1  gen()   290 MB/s
[    1.990625] raid6: using algorithm int32x2 gen() 415 MB/s
[    2.375804] raid6: .... xor() 191 MB/s, rmw enabled
[    2.376133] raid6: using intx1 recovery algorithm
[    2.381896] SCSI subsystem initialized
[    2.383307] usbcore: registered new interface driver usbfs
[    2.384073] usbcore: registered new interface driver hub
[    2.384570] usbcore: registered new device driver usb
[    2.385509] pps_core: LinuxPPS API ver. 1 registered
[    2.385638] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.385982] PTP clock support registered
[    2.421404] PCI host bridge to bus 0000:00
[    2.422242] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    2.423454] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    2.423842] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.426775] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    2.429097] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    2.429337] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    2.429516] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    2.429675] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    2.429895] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    2.435118] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    2.436719] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    2.438298] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    2.438621] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.438801] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.439029] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.439202] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.440173] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    2.440392] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    2.441570] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    2.442559] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    2.442874] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    2.444049] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    2.444236] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    2.444530] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    2.444717] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.445692] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    2.445933] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    2.446271] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.446551] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    2.447348] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    2.447833] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    2.448038] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.448880] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    2.449102] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    2.449300] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.450844] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.453710] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    2.454394] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    2.454674] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    2.454906] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    2.455231] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    2.455432] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    2.455672] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    2.455921] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    2.456099] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    2.456238] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    2.456397] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    2.456555] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    2.460749] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    2.461079] pci 0000:00:12.0: vgaarb: bridge control possible
[    2.461292] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    2.461545] vgaarb: loaded
[    2.466061] clocksource: Switched to clocksource MIPS
[    2.796404] NET: Registered PF_INET protocol family
[    2.799275] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.819447] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.819930] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.820204] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.820707] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    2.821084] TCP: Hash tables configured (established 2048 bind 2048)
[    2.823536] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.824160] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.827895] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.833849] RPC: Registered named UNIX socket transport module.
[    2.834126] RPC: Registered udp transport module.
[    2.834241] RPC: Registered tcp transport module.
[    2.834342] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.836747] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.838683] PCI: CLS 0 bytes, default 16
[    2.856729] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.896492] NFS: Registering the id_resolver key type
[    2.899229] Key type id_resolver registered
[    2.899431] Key type id_legacy registered
[    2.905527] Key type cifs.idmap registered
[    3.082570] xor: measuring software checksum speed
[    3.095463]    8regs           :   822 MB/sec
[    3.108695]    8regs_prefetch  :   782 MB/sec
[    3.121701]    32regs          :   774 MB/sec
[    3.135953]    32regs_prefetch :   731 MB/sec
[    3.136136] xor: using function: 8regs (822 MB/sec)
[    3.137207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.137441] io scheduler mq-deadline registered
[    3.137589] io scheduler kyber registered
[    3.153180] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    3.158076] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    3.159584] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    3.162979] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    3.170975] printk: console [ttyS0] disabled
[    3.196933] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.197264] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    3.238252] printk: console [ttyS0] enabled
[    3.264732] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.265559] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    3.266660] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    3.280557] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    3.284364] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    3.287292] random: crng init done
[    3.288398] [drm] Found bochs VGA, ID 0xb0c5.
[    3.288741] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    3.295586] [drm] Found EDID data blob.
[    3.307531] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    3.441553] Console: switching to colour frame buffer device 160x50
[    3.469561] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    3.527567] brd: module loaded
[    3.528911] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    3.535814] virtio_blk virtio2: [vda] 40114 512-byte logical blocks (20.5 MB/19.6 MiB)
[    3.572858] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.576796] ehci-pci: EHCI PCI platform driver
[    3.578180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.579758] ohci-pci: OHCI PCI platform driver
[    3.581050] uhci_hcd: USB Universal Host Controller Interface driver
[    3.584227] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    3.587862] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    3.593838] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    3.609353] hub 1-0:1.0: USB hub found
[    3.614836] hub 1-0:1.0: 2 ports detected
[    3.632215] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.634861] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.647228] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    3.671192] usbcore: registered new interface driver usbhid
[    3.672108] usbhid: USB HID core driver
[    3.673472] u32 classifier
[    3.673864]     input device check on
[    3.674255]     Actions configured
[    3.677834] NET: Registered PF_INET6 protocol family
[    3.690434] Segment Routing with IPv6
[    3.691678] In-situ OAM (IOAM) with IPv6
[    3.720513] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.751528] NET: Registered PF_PACKET protocol family
[    3.787243] Bridge firewalling registered
[    3.817415] Key type dns_resolver registered
[    3.848350] NET: Registered PF_VSOCK protocol family
[    3.876697] Key type ._fscrypt registered
[    3.896194] Key type .fscrypt registered
[    3.905192] Key type fscrypt-provisioning registered
[    3.935510] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.945670] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.996221] Key type encrypted registered
[    4.034063] printk: console [netcon0] enabled
[    4.052378] netconsole: network logging started
[    4.279692] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[    4.290453] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
[    4.304348] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    4.427610] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.546212] IP-Config: Complete:
[    4.564247]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    4.596972]      host=192.168.7.6, domain=, nis-domain=(none)
[    4.624366] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.634896]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.635153]      nameserver0=8.8.8.8
[    4.718522] md: Waiting for all devices to be available before autodetect
[    4.736072] md: If you don't use raid, use raid=noautodetect
[    4.757265] md: Autodetecting RAID arrays.
[    4.780937] md: autorun ...
[    4.805640] md: ... autorun DONE.
[    4.901525] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    4.923128] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.962021] devtmpfs: mounted
[    5.064203] Freeing unused kernel image (initmem) memory: 424K
[    5.085346] This architecture does not have kernel memory protection.
[    5.121246] Run /sbin/init as init process
[    5.204019] process '/sbin/init.sysvinit' started with executable stack
[   10.362815] udevd[112]: starting version 3.2.11
[   10.666419] udevd[113]: starting eudev-3.2.11
[   14.316960] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error

Configuring network interfaces... ip: RTNETLINK answers: File exists
hwclock: can't open '/dev/misc/rtc': No such file or directory
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.1 qemumips /dev/ttyS0

qemumips login: 