[    0.000000] Linux version 6.1.5-rt5-yocto-preempt-rt (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT_RT Fri Jan 13 04:17:37 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] random: crng init done
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000a8547f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000a85480-0x0000000000a8548f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000a85490-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003] kvm-clock: using sched offset of 628456743 cycles
[    0.000008] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000015] tsc: Detected 2599.996 MHz processor
[    0.001213] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001254] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011735] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.012090] ACPI: Early table checksum verification disabled
[    0.012117] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.012125] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012140] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012147] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012151] ACPI: FACS 0x000000000FFE0000 000040
[    0.012155] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012159] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012163] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012167] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012169] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.012171] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.012172] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.012172] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.012173] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.012174] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.012174] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.020084] Zone ranges:
[    0.020086]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.020092]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.020095]   Normal   empty
[    0.020097] Movable zone start for each node
[    0.020098] Early memory node ranges
[    0.020099]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.020102]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.020104] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.020557] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.020576] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.021243] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.021792] ACPI: PM-Timer IO Port: 0x608
[    0.021805] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.021849] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.021853] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.021854] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.021856] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.021858] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.021859] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.021866] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.021868] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.021874] TSC deadline timer available
[    0.021875] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.021919] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.021921] Booting paravirtualized kernel on KVM
[    0.021931] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.021939] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.022543] percpu: Embedded 53 pages/cpu s177664 r8192 d31232 u524288
[    0.022587] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.022589] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.022717] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.022742] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.022841] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.023732] Memory: 224532K/261592K available (16394K kernel code, 2127K rwdata, 4172K rodata, 1884K init, 1976K bss, 36800K reserved, 0K cma-reserved)
[    0.023808] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.023826] Kernel/User page tables isolation: enabled
[    0.023847] ftrace: allocating 44676 entries in 175 pages
[    0.035374] ftrace: allocated 175 pages with 6 groups
[    0.035857] rcu: Preemptible hierarchical RCU implementation.
[    0.035858] rcu: 	RCU event tracing is enabled.
[    0.035859] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.035860] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.035861] rcu: 	RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.035861] 	No expedited grace period (rcu_normal_after_boot).
[    0.035862] 	Trampoline variant of Tasks RCU enabled.
[    0.035862] 	Rude variant of Tasks RCU enabled.
[    0.035863] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.035864] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.041700] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.041874] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.049218] Console: colour VGA+ 80x25
[    0.220657] printk: console [ttyS0] enabled
[    0.220666] ACPI: Core revision 20220331
[    0.220814] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.220927] APIC: Switch to symmetric I/O mode setup
[    0.221192] x2apic enabled
[    0.221494] Switched APIC routing to physical x2apic.
[    0.222716] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.222746] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.222750] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.222753] pid_max: default: 32768 minimum: 301
[    0.222776] LSM: Security Framework initializing
[    0.222804] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.222806] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.224210] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.224219] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.224228] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.224235] Spectre V2 : Mitigation: Retpolines
[    0.224236] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.224237] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.224237] Speculative Store Bypass: Vulnerable
[    0.224243] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.224244] MMIO Stale Data: Unknown: No mitigations
[    0.224244] SRBDS: Unknown: Dependent on hypervisor status
[    0.244138] Freeing SMP alternatives memory: 44K
[    0.244259] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.278746] cblist_init_generic: Setting adjustable number of callback queues.
[    0.278752] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.282581] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.283966] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.285977] rcu: Hierarchical SRCU implementation.
[    0.285978] rcu: 	Max phase no-delay instances is 400.
[    0.285993] printk: console [ttyS0] printing thread started
[    0.289814] smp: Bringing up secondary CPUs ...
[    0.289956] x86: Booting SMP configuration:
[    0.289957] .... node  #0, CPUs:      #1 #2 #3
[    0.293790] smp: Brought up 1 node, 4 CPUs
[    0.293790] smpboot: Max logical packages: 1
[    0.293790] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.294063] devtmpfs: initialized
[    0.294063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.295800] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.296400] pinctrl core: initialized pinctrl subsystem
[    0.296838] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.297328] thermal_sys: Registered thermal governor 'step_wise'
[    0.297330] thermal_sys: Registered thermal governor 'user_space'
[    0.297652] cpuidle: using governor menu
[    0.298105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.298114] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.298141] PCI: Using configuration type 1 for base access
[    0.304855] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.322589] raid6: sse2x4   gen()  6227 MB/s
[    0.339765] raid6: sse2x2   gen()  6235 MB/s
[    0.356763] raid6: sse2x1   gen() 10250 MB/s
[    0.356764] raid6: using algorithm sse2x1 gen() 10250 MB/s
[    0.373753] raid6: .... xor() 6771 MB/s, rmw enabled
[    0.373754] raid6: using ssse3x2 recovery algorithm
[    0.373822] ACPI: Added _OSI(Module Device)
[    0.373823] ACPI: Added _OSI(Processor Device)
[    0.373824] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.373825] ACPI: Added _OSI(Processor Aggregator Device)
[    0.375725] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.380047] ACPI: Interpreter enabled
[    0.380070] ACPI: PM: (supports S0 S3 S5)
[    0.380071] ACPI: Using IOAPIC for interrupt routing
[    0.380101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.380103] PCI: Using E820 reservations for host bridge windows
[    0.380257] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.383570] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.383576] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.383643] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.383749] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.383832] PCI host bridge to bus 0000:00
[    0.383834] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.383836] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.383838] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.383839] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.383841] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.383842] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.383844] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.383947] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.384997] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.386730] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.387709] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.392754] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.394753] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.399005] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.399754] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.400753] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.403754] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.407884] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.409418] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.411408] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.412425] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.415384] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.415616] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.417074] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.418545] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.419452] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.424755] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.427206] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.429415] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.430562] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.432687] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.435123] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.437440] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.438592] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.439188] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.441962] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.442875] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.443369] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.448459] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.449119] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.450507] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.452635] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.454214] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.454374] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.454528] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.454674] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.454818] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.454976] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.455130] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.455251] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.455314] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.455328] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.455340] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.455352] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.455364] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.455376] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.455388] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.455400] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.456064] iommu: Default domain type: Translated 
[    0.456066] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.456224] SCSI subsystem initialized
[    0.456335] ACPI: bus type USB registered
[    0.456335] usbcore: registered new interface driver usbfs
[    0.456335] usbcore: registered new interface driver hub
[    0.456335] usbcore: registered new device driver usb
[    0.456335] pps_core: LinuxPPS API ver. 1 registered
[    0.456335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.456335] PTP clock support registered
[    0.457134] Bluetooth: Core ver 2.22
[    0.457144] NET: Registered PF_BLUETOOTH protocol family
[    0.457145] Bluetooth: HCI device and connection manager initialized
[    0.457149] Bluetooth: HCI socket layer initialized
[    0.457151] Bluetooth: L2CAP socket layer initialized
[    0.457158] Bluetooth: SCO socket layer initialized
[    0.457199] PCI: Using ACPI for IRQ routing
[    0.603800] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.603803] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.603805] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.603809] vgaarb: loaded
[    0.603880] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.603886] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.606881] clocksource: Switched to clocksource kvm-clock
[    0.639161] pnp: PnP ACPI init
[    0.639571] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.640205] pnp: PnP ACPI: found 6 devices
[    0.650898] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.650982] NET: Registered PF_INET protocol family
[    0.651079] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.651817] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear)
[    0.651827] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.651836] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.651854] TCP bind hash table entries: 2048 (order: 5, 163840 bytes, linear)
[    0.652432] TCP: Hash tables configured (established 2048 bind 2048)
[    0.652490] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.652509] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.652618] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.653130] RPC: Registered named UNIX socket transport module.
[    0.653132] RPC: Registered udp transport module.
[    0.653134] RPC: Registered tcp transport module.
[    0.653135] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.653158] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.653164] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.653167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.653170] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.653172] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.653175] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.654331] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.657253] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.660020] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.662673] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.664844] PCI: CLS 0 bytes, default 64
[    0.665815] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.665828] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.671616] Initialise system trusted keyrings
[    0.671886] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.678345] NFS: Registering the id_resolver key type
[    0.678358] Key type id_resolver registered
[    0.678363] Key type id_legacy registered
[    0.703000] xor: automatically using best checksumming function   avx       
[    0.703005] Key type asymmetric registered
[    0.703010] Asymmetric key parser 'x509' registered
[    0.703035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.703042] io scheduler mq-deadline registered
[    0.703044] io scheduler kyber registered
[    0.703871] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.704918] ACPI: button: Power Button [PWRF]
[    0.706884] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.713831] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.719325] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.724668] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.729138] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729713] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.730512] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.732949] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.747907] Linux agpgart interface v0.103
[    0.748094] ACPI: bus type drm_connector registered
[    0.748566] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.748575] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.770075] Console: switching to colour dummy device 80x25
[    0.770446] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.770449] [drm] features: -context_init
[    0.773519] [drm] number of scanouts: 1
[    0.773536] [drm] number of cap sets: 0
[    0.774378] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.780120] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.780380] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.814678] Console: switching to colour frame buffer device 160x50
[    0.823891] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.848048] brd: module loaded
[    0.853559] loop: module loaded
[    0.854329] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.862358] virtio_blk virtio3: [vda] 274228 512-byte logical blocks (140 MB/134 MiB)
[    0.871683] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.871692] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.875839] scsi host0: ahci
[    0.876360] scsi host1: ahci
[    0.876842] scsi host2: ahci
[    0.877230] scsi host3: ahci
[    0.877618] scsi host4: ahci
[    0.878030] scsi host5: ahci
[    0.878187] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.878226] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.878265] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.878281] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.878306] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.878319] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.884705] e100: Intel(R) PRO/100 Network Driver
[    0.884708] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.884739] e1000: Intel(R) PRO/1000 Network Driver
[    0.884741] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.884805] e1000e: Intel(R) PRO/1000 Network Driver
[    0.884806] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.884837] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.884839] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.887164] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.887191] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.888235] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.894996] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.895531] hub 1-0:1.0: USB hub found
[    0.895556] hub 1-0:1.0: 6 ports detected
[    0.898606] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.898622] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.899344] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.900051] hub 2-0:1.0: USB hub found
[    0.900064] hub 2-0:1.0: 2 ports detected
[    0.903117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.903132] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.903814] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.904465] hub 3-0:1.0: USB hub found
[    0.904484] hub 3-0:1.0: 2 ports detected
[    0.907746] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.908187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.908739] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.909362] hub 4-0:1.0: USB hub found
[    0.909375] hub 4-0:1.0: 2 ports detected
[    0.909964] usbcore: registered new interface driver usb-storage
[    0.910023] usbcore: registered new interface driver usbserial_generic
[    0.910040] usbserial: USB Serial support registered for generic
[    0.910057] usbcore: registered new interface driver ftdi_sio
[    0.910066] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.910105] usbcore: registered new interface driver pl2303
[    0.910114] usbserial: USB Serial support registered for pl2303
[    0.910208] i8042: PNP: No PS/2 controller found.
[    0.910405] mousedev: PS/2 mouse device common for all mice
[    0.910807] rtc_cmos 00:04: RTC can wake from S4
[    0.913483] rtc_cmos 00:04: registered as rtc0
[    0.913817] rtc_cmos 00:04: setting system clock to 2023-01-28T00:43:53 UTC (1674866633)
[    0.914105] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.914655] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.914839] intel_pstate: CPU model not supported
[    0.914881] sdhci: Secure Digital Host Controller Interface driver
[    0.914883] sdhci: Copyright(c) Pierre Ossman
[    0.914930] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.915038] usbcore: registered new interface driver usbhid
[    0.915040] usbhid: USB HID core driver
[    0.915093] u32 classifier
[    0.915095]     input device check on
[    0.915095]     Actions configured
[    0.915524] NET: Registered PF_INET6 protocol family
[    0.916066] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.916259] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.916263] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.916673] Segment Routing with IPv6
[    0.916690] In-situ OAM (IOAM) with IPv6
[    0.916736] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.917110] NET: Registered PF_PACKET protocol family
[    0.917184] Key type dns_resolver registered
[    0.917304] NET: Registered PF_VSOCK protocol family
[    0.918435] IPI shorthand broadcast: enabled
[    0.918485] sched_clock: Marking stable (738388213, 179870293)->(966759116, -48500610)
[    0.918909] registered taskstats version 1
[    0.918914] Loading compiled-in X.509 certificates
[    0.919100] Key type .fscrypt registered
[    0.919102] Key type fscrypt-provisioning registered
[    0.920005] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.921866] Key type encrypted registered
[    0.924632] printk: console [netcon0] printing thread started
[    0.924637] printk: console [netcon0] enabled
[    0.924641] netconsole: network logging started
[    1.134842] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.190310] ata6: SATA link down (SStatus 0 SControl 300)
[    1.190655] ata1: SATA link down (SStatus 0 SControl 300)
[    1.191288] ata5: SATA link down (SStatus 0 SControl 300)
[    1.191994] ata4: SATA link down (SStatus 0 SControl 300)
[    1.192576] ata2: SATA link down (SStatus 0 SControl 300)
[    1.193295] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.193683] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.193690] ata3.00: applying bridge limits
[    1.194169] ata3.00: configured for UDMA/100
[    1.203517] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.249634] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.249651] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.286936] IP-Config: Complete:
[    1.286939]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.286945]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.286947]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.286950]      nameserver0=8.8.8.8
[    1.295609] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.295826] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.314739] md: Waiting for all devices to be available before autodetect
[    1.314743] md: If you don't use raid, use raid=noautodetect
[    1.314813] md: Autodetecting RAID arrays.
[    1.314815] md: autorun ...
[    1.314816] md: ... autorun DONE.
[    1.317726] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.317843] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.318865] devtmpfs: mounted
[    1.322232] Freeing unused kernel image (initmem) memory: 1884K
[    1.332904] Write protecting the kernel read-only data: 24576k
[    1.336036] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.337144] Freeing unused kernel image (rodata/data gap) memory: 1972K
[    1.337345] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO fai[    1.409833] usb 1-2: new high-speed USB device number 3 using ehci-pci
led, double buffering disabled
Starting udev
[    1.545494] udevd[200]: starting version 3.2.11
[    1.559524] udevd[201]: starting eudev-3.2.11
[    1.571609] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.623274] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.801184] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.916888] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
starting 8 nfsd kernel threads: [    4.229459] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
done
[    4.229894] NFSD: Using legacy client tracking operations.
[    4.229909] NFSD: starting 90-second grace period (net f0000000)
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.1 qemux86-64 ttyS0

qemux86-64 login: 