[ 0.000000] Linux version 5.15.87-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Jan 13 14:12:02 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12654K kernel code, 1902K rwdata, 2864K rodata, 416K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.53 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11460907329 ns [ 0.000105] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12877423613ns [ 0.011689] Console: colour dummy device 80x25 [ 0.012311] printk: console [tty0] enabled [ 0.013069] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.15.87-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Jan 13 14:12:02 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12654K kernel code, 1902K rwdata, 2864K rodata, 416K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.53 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11460907329 ns [ 0.000105] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12877423613ns [ 0.011689] Console: colour dummy device 80x25 [ 0.012311] printk: console [tty0] enabled [ 0.013069] printk: bootconsole [uart8250] disabled [ 0.014974] Calibrating delay loop... 1007.61 BogoMIPS (lpj=5038080) [ 0.093229] pid_max: default: 32768 minimum: 301 [ 0.094087] LSM: Security Framework initializing [ 0.095183] landlock: Up and running. [ 0.097909] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.098051] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.133970] Performance counters: Either hardware does not support performance counters, or not yet implemented. [ 0.135044] rcu: Hierarchical SRCU implementation. [ 0.141411] smp: Bringing up secondary CPUs ... [ 0.141546] smp: Brought up 1 node, 1 CPU [ 0.155182] devtmpfs: initialized [ 0.162573] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.162795] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.172107] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.417340] raid6: int64x8 gen() 450 MB/s [ 0.590873] raid6: int64x8 xor() 333 MB/s [ 0.761751] raid6: int64x4 gen() 960 MB/s [ 0.934534] raid6: int64x4 xor() 615 MB/s [ 1.107789] raid6: int64x2 gen() 1348 MB/s [ 1.280365] raid6: int64x2 xor() 742 MB/s [ 1.452881] raid6: int64x1 gen() 1043 MB/s [ 1.625582] raid6: int64x1 xor() 607 MB/s [ 1.625667] raid6: using algorithm int64x2 gen() 1348 MB/s [ 1.625736] raid6: .... xor() 742 MB/s, rmw enabled [ 1.625888] raid6: using intx1 recovery algorithm [ 1.631858] vgaarb: loaded [ 1.633250] SCSI subsystem initialized [ 1.633880] usbcore: registered new interface driver usbfs [ 1.634225] usbcore: registered new interface driver hub [ 1.634467] usbcore: registered new device driver usb [ 1.634892] pps_core: LinuxPPS API ver. 1 registered [ 1.634961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.635129] PTP clock support registered [ 1.647080] PCI host bridge to bus 0000:00 [ 1.647407] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.648430] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.648627] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.650112] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.650879] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.650973] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.651050] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.651122] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.651207] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.653514] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.654199] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.654480] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.654625] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.654704] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.654826] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.654904] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.655308] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.655425] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.656160] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.656697] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.656862] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.657370] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.657466] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.657607] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.657685] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.658123] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.658497] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.658614] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.658778] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.658927] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.659283] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.659383] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.659468] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.659856] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.659956] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.660041] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.660702] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.662139] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.662468] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.662603] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.662808] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.662965] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.663065] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.663177] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.663287] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.663375] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.663439] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.663508] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.663570] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.665835] clocksource: Switched to clocksource MIPS [ 1.798388] NET: Registered PF_INET protocol family [ 1.799573] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.821489] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.821768] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.821899] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.822641] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.822932] TCP: Hash tables configured (established 8192 bind 8192) [ 1.824125] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.824439] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.840139] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.842817] RPC: Registered named UNIX socket transport module. [ 1.842922] RPC: Registered udp transport module. [ 1.842974] RPC: Registered tcp transport module. [ 1.843023] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.844066] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.844866] PCI: CLS 0 bytes, default 32 [ 2.277641] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 2.292416] NFS: Registering the id_resolver key type [ 2.293715] Key type id_resolver registered [ 2.293803] Key type id_legacy registered [ 2.296486] Key type cifs.idmap registered [ 2.331418] xor: measuring software checksum speed [ 2.337623] 8regs : 1721 MB/sec [ 2.343669] 8regs_prefetch : 1683 MB/sec [ 2.350714] 32regs : 1749 MB/sec [ 2.357135] 32regs_prefetch : 1610 MB/sec [ 2.357230] xor: using function: 32regs (1749 MB/sec) [ 2.357612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.357810] io scheduler mq-deadline registered [ 2.357927] io scheduler kyber registered [ 2.362642] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.365677] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.366811] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.368869] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.374405] printk: console [ttyS0] disabled [ 2.398771] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.398894] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.432557] printk: console [ttyS0] enabled [ 2.455191] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.455705] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.456095] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.464344] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.465327] [drm] Found bochs VGA, ID 0xb0c5. [ 2.466421] random: crng init done [ 2.466910] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.470339] [drm] Found EDID data blob. [ 2.475732] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.538144] Console: switching to colour frame buffer device 128x48 [ 2.549972] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.582486] brd: module loaded [ 2.588211] virtio_blk virtio2: [vda] 4748654 512-byte logical blocks (2.43 GB/2.26 GiB) [ 2.614828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.615621] ehci-pci: EHCI PCI platform driver [ 2.616324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.616939] ohci-pci: OHCI PCI platform driver [ 2.622841] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.624069] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.628456] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 2.631757] usbcore: registered new interface driver usbhid [ 2.632312] usbhid: USB HID core driver [ 2.633269] u32 classifier [ 2.633605] input device check on [ 2.634006] Actions configured [ 2.636345] NET: Registered PF_INET6 protocol family [ 2.644513] Segment Routing with IPv6 [ 2.645098] In-situ OAM (IOAM) with IPv6 [ 2.646371] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.649565] NET: Registered PF_PACKET protocol family [ 2.650823] Bridge firewalling registered [ 2.652177] Key type dns_resolver registered [ 2.655674] NET: Registered PF_VSOCK protocol family [ 2.662394] Key type .fscrypt registered [ 2.668847] Key type fscrypt-provisioning registered [ 2.679052] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.705814] Key type encrypted registered [ 2.713442] printk: console [netcon0] enabled [ 2.724239] netconsole: network logging started [ 2.738393] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.795927] IP-Config: Complete: [ 2.802265] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 2.808941] host=192.168.7.2, domain=, nis-domain=(none) [ 2.813320] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.813434] nameserver0=8.8.8.8 [ 3.387139] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.393395] md: Waiting for all devices to be available before autodetect [ 3.400038] md: If you don't use raid, use raid=noautodetect [ 3.404404] md: Autodetecting RAID arrays. [ 3.410538] md: autorun ... [ 3.415553] md: ... autorun DONE. [ 3.456136] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 3.463055] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.472512] devtmpfs: mounted [ 3.508321] Freeing unused kernel image (initmem) memory: 416K [ 3.514716] This architecture does not have kernel memory protection. [ 3.521193] Run /sbin/init as init process [ 3.549366] process '/sbin/init.sysvinit' started with executable stack [ 3.639076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.891614] udevd[118]: starting version 3.2.10 [ 5.990858] udevd[119]: starting eudev-3.2.10 [ 15.926007] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. ALSA: Restoring mixer settings... INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips64 5.15.87-yocto-standard #1 SMP PREEMPT Fri Jan 13 14:12:02 UTC 2023 mips64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 31 02:36:53 2023 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting bluetooth: bluetoothd. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86EmojiPicker Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-5fs7TgaHxr,guid=b95e3b8cb028d7757a6d69d563d87eca [A[122G[ ok ] Starting Telephony daemon Using calibration data stored in /etc/pointercal.xinput No makedumpfile found. Starting crond: OK Using calibration data stored in /etc/pointercal.xinput Poky (Yocto Project Reference Distro) 4.0.7 qemumips64 ttyS0 qemumips64 login: [ 1636.676914] hellomod: loading out-of-tree module taints kernel. [ 1636.692784] Hello world! [ 1638.787318] Cleaning up hellomod.