[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 318728100 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000008] tsc: Detected 2599.996 MHz processor
[    0.000890] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000921] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008513] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.008703] ACPI: Early table checksum verification disabled
[    0.008728] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.008735] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008745] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008751] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008754] ACPI: FACS 0x000000001FFE0000 000040
[    0.008757] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008760] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008763] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008766] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008769] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6]
[    0.008770] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2]
[    0.008771] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008771] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366]
[    0.008772] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e]
[    0.008772] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da]
[    0.008773] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402]
[    0.008843] Zone ranges:
[    0.008844]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008846]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.008847]   Normal   empty
[    0.008848] Movable zone start for each node
[    0.008848] Early memory node ranges
[    0.008848]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008851]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.008853] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.009235] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.009249] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.010779] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.011222] ACPI: PM-Timer IO Port: 0x608
[    0.011233] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.011266] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.011269] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.011270] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.011271] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.011274] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.011275] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.011280] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.011281] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.011285] TSC deadline timer available
[    0.011287] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.011325] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.011326] Booting paravirtualized kernel on KVM
[    0.011333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.011341] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.011879] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.011917] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.011918] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.012049] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.012087] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.012607] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.013709] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved)
[    0.013764] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.013775] Kernel/User page tables isolation: enabled
[    0.013800] ftrace: allocating 47075 entries in 184 pages
[    0.023453] ftrace: allocated 184 pages with 4 groups
[    0.023497] Dynamic Preempt: full
[    0.023891] rcu: Preemptible hierarchical RCU implementation.
[    0.023891] rcu: 	RCU event tracing is enabled.
[    0.023892] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.023893] 	All grace periods are expedited (rcu_expedited).
[    0.023893] 	Trampoline variant of Tasks RCU enabled.
[    0.023894] 	Rude variant of Tasks RCU enabled.
[    0.023894] 	Tracing variant of Tasks RCU enabled.
[    0.023895] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.023896] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.027711] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.027867] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.027959] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.027971] random: crng init done
[    0.032734] Console: colour VGA+ 80x25
[    0.120507] printk: console [ttyS0] enabled
[    0.121031] ACPI: Core revision 20220331
[    0.121623] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.122833] APIC: Switch to symmetric I/O mode setup
[    0.123643] x2apic enabled
[    0.124271] Switched APIC routing to physical x2apic.
[    0.125839] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.126635] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.128885] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.129887] pid_max: default: 32768 minimum: 301
[    0.130476] LSM: Security Framework initializing
[    0.130893] landlock: Up and running.
[    0.131887] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.132888] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.134267] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.134904] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.135895] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.136890] Spectre V2 : Mitigation: Retpolines
[    0.137454] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.137887] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.138887] Speculative Store Bypass: Vulnerable
[    0.139892] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.140887] MMIO Stale Data: Unknown: No mitigations
[    0.141485] SRBDS: Unknown: Dependent on hypervisor status
[    0.157861] Freeing SMP alternatives memory: 52K
[    0.157982] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.158989] cblist_init_generic: Setting adjustable number of callback queues.
[    0.159888] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.160664] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.160902] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.161688] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.161936] rcu: Hierarchical SRCU implementation.
[    0.162534] rcu: 	Max phase no-delay instances is 400.
[    0.163094] smp: Bringing up secondary CPUs ...
[    0.163761] x86: Booting SMP configuration:
[    0.163890] .... node  #0, CPUs:      #1 #2 #3
[    0.165168] smp: Brought up 1 node, 4 CPUs
[    0.166485] smpboot: Max logical packages: 1
[    0.166888] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.167966] devtmpfs: initialized
[    0.168587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.168893] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.169851] pinctrl core: initialized pinctrl subsystem
[    0.170592] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.171018] thermal_sys: Registered thermal governor 'step_wise'
[    0.171020] thermal_sys: Registered thermal governor 'user_space'
[    0.171891] cpuidle: using governor menu
[    0.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.174891] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.175870] PCI: Using configuration type 1 for base access
[    0.177918] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.195888] raid6: sse2x4   gen() 16141 MB/s
[    0.212887] raid6: sse2x2   gen() 16705 MB/s
[    0.229888] raid6: sse2x1   gen() 12820 MB/s
[    0.230491] raid6: using algorithm sse2x2 gen() 16705 MB/s
[    0.247886] raid6: .... xor() 10661 MB/s, rmw enabled
[    0.248604] raid6: using ssse3x2 recovery algorithm
[    0.248916] ACPI: Added _OSI(Module Device)
[    0.249512] ACPI: Added _OSI(Processor Device)
[    0.249888] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.250536] ACPI: Added _OSI(Processor Aggregator Device)
[    0.250889] ACPI: Added _OSI(Linux-Dell-Video)
[    0.251478] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.251888] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.253372] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.254985] ACPI: Interpreter enabled
[    0.255576] ACPI: PM: (supports S0 S3 S5)
[    0.255889] ACPI: Using IOAPIC for interrupt routing
[    0.256582] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.256888] PCI: Using E820 reservations for host bridge windows
[    0.257749] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.259410] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.259892] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.260952] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.261919] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.262926] PCI host bridge to bus 0000:00
[    0.263519] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.263889] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.264767] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.264888] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.265866] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.265888] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.266868] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.266935] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.268335] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.269889] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.271622] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.274889] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.276740] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.277465] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.278655] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.281231] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.284194] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.286397] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.288916] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.290904] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.293905] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.294948] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.296619] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.297889] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.299342] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.302805] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.304359] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.306339] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.308315] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.310668] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.311615] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.313375] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.314689] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.315232] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.317964] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.319143] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.320127] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.323695] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.324507] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.325762] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.328189] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.330496] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.330970] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.331917] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.332843] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.332949] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.333769] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.333973] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.334850] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.334919] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.335787] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.335896] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.336711] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.336896] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.337716] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.337896] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.338712] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.339251] SCSI subsystem initialized
[    0.339916] ACPI: bus type USB registered
[    0.340607] usbcore: registered new interface driver usbfs
[    0.340900] usbcore: registered new interface driver hub
[    0.341638] usbcore: registered new device driver usb
[    0.341901] pps_core: LinuxPPS API ver. 1 registered
[    0.342661] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.342891] PTP clock support registered
[    0.343444] Bluetooth: Core ver 2.22
[    0.343894] NET: Registered PF_BLUETOOTH protocol family
[    0.344642] Bluetooth: HCI device and connection manager initialized
[    0.344892] Bluetooth: HCI socket layer initialized
[    0.345567] Bluetooth: L2CAP socket layer initialized
[    0.345895] Bluetooth: SCO socket layer initialized
[    0.346929] PCI: Using ACPI for IRQ routing
[    0.402364] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.402717] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.402885] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.402890] vgaarb: loaded
[    0.403288] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.403888] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.407938] clocksource: Switched to clocksource kvm-clock
[    0.408814] pnp: PnP ACPI init
[    0.409362] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.410517] pnp: PnP ACPI: found 6 devices
[    0.417706] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.418903] NET: Registered PF_INET protocol family
[    0.419597] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.420820] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.421919] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.422844] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.423745] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.424566] TCP: Hash tables configured (established 4096 bind 4096)
[    0.425382] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.426153] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.427017] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.428136] RPC: Registered named UNIX socket transport module.
[    0.428943] RPC: Registered udp transport module.
[    0.429542] RPC: Registered tcp transport module.
[    0.430101] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.430926] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.432366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.433125] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.433937] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.434747] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.435574] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.436646] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.438000] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.439190] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.440339] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.441541] PCI: CLS 0 bytes, default 64
[    0.442219] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.443397] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.445251] Initialise system trusted keyrings
[    0.445954] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.448092] NFS: Registering the id_resolver key type
[    0.448792] Key type id_resolver registered
[    0.449370] Key type id_legacy registered
[    0.450182] Key type cifs.idmap registered
[    0.458955] xor: automatically using best checksumming function   avx       
[    0.459813] Key type asymmetric registered
[    0.460323] Asymmetric key parser 'x509' registered
[    0.460948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.462825] io scheduler mq-deadline registered
[    0.463358] io scheduler kyber registered
[    0.464217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.466038] ACPI: button: Power Button [PWRF]
[    0.467189] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.469078] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.470795] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.472574] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.474144] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.475206] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.476409] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.477596] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.479341] Linux agpgart interface v0.103
[    0.480060] ACPI: bus type drm_connector registered
[    0.480813] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.481505] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.489391] Console: switching to colour dummy device 80x25
[    0.490260] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.490261] [drm] features: -context_init
[    0.492842] [drm] number of scanouts: 1
[    0.493334] [drm] number of cap sets: 0
[    0.494156] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.497788] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.499668] Console: switching to colour frame buffer device 160x50
[    0.527271] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.529875] brd: module loaded
[    0.531267] loop: module loaded
[    0.531804] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.533649] virtio_blk virtio3: [vda] 1256626 512-byte logical blocks (643 MB/614 MiB)
[    0.536731] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.537751] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.539330] scsi host0: ahci
[    0.540003] scsi host1: ahci
[    0.540671] scsi host2: ahci
[    0.541302] scsi host3: ahci
[    0.541940] scsi host4: ahci
[    0.542560] scsi host5: ahci
[    0.543032] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.543971] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.544869] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.545745] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.546615] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.547523] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.549964] e100: Intel(R) PRO/100 Network Driver
[    0.554899] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.555600] e1000: Intel(R) PRO/1000 Network Driver
[    0.556235] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.556976] e1000e: Intel(R) PRO/1000 Network Driver
[    0.557604] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.558434] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.559126] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.559807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.560578] ehci-pci: EHCI PCI platform driver
[    0.561639] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.562351] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.563399] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.570958] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.571865] hub 1-0:1.0: USB hub found
[    0.572488] hub 1-0:1.0: 6 ports detected
[    0.573233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.574034] ohci-pci: OHCI PCI platform driver
[    0.574591] uhci_hcd: USB Universal Host Controller Interface driver
[    0.575855] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.576515] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.577540] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.578447] hub 2-0:1.0: USB hub found
[    0.578971] hub 2-0:1.0: 2 ports detected
[    0.580084] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.580789] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.581898] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.582812] hub 3-0:1.0: USB hub found
[    0.583401] hub 3-0:1.0: 2 ports detected
[    0.584434] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.585172] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.586225] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.587169] hub 4-0:1.0: USB hub found
[    0.587658] hub 4-0:1.0: 2 ports detected
[    0.588390] usbcore: registered new interface driver usb-storage
[    0.589238] usbcore: registered new interface driver usbserial_generic
[    0.590050] usbserial: USB Serial support registered for generic
[    0.590836] usbcore: registered new interface driver ftdi_sio
[    0.591627] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.592610] usbcore: registered new interface driver pl2303
[    0.593329] usbserial: USB Serial support registered for pl2303
[    0.594116] i8042: PNP: No PS/2 controller found.
[    0.594795] mousedev: PS/2 mouse device common for all mice
[    0.595692] rtc_cmos 00:04: RTC can wake from S4
[    0.597172] rtc_cmos 00:04: registered as rtc0
[    0.597820] rtc_cmos 00:04: setting system clock to 2023-02-10T21:25:12 UTC (1676064312)
[    0.598841] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.600019] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.600811] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.601514] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.602717] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.603956] intel_pstate: CPU model not supported
[    0.604590] sdhci: Secure Digital Host Controller Interface driver
[    0.605398] sdhci: Copyright(c) Pierre Ossman
[    0.605963] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.606738] usbcore: registered new interface driver usbhid
[    0.607455] usbhid: USB HID core driver
[    0.607949] u32 classifier
[    0.608294]     input device check on
[    0.608736]     Actions configured
[    0.609257] NET: Registered PF_INET6 protocol family
[    0.610286] Segment Routing with IPv6
[    0.610778] In-situ OAM (IOAM) with IPv6
[    0.611274] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.612124] NET: Registered PF_PACKET protocol family
[    0.612903] Bridge firewalling registered
[    0.613425] Key type dns_resolver registered
[    0.614016] NET: Registered PF_VSOCK protocol family
[    0.615016] IPI shorthand broadcast: enabled
[    0.615648] sched_clock: Marking stable (517971409, 97012158)->(671088725, -56105158)
[    0.616682] Loading compiled-in X.509 certificates
[    0.617491] Key type ._fscrypt registered
[    0.618049] Key type .fscrypt registered
[    0.618503] Key type fscrypt-provisioning registered
[    0.619306] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.620588] Key type encrypted registered
[    0.622353] printk: console [netcon0] enabled
[    0.622981] netconsole: network logging started
[    0.813923] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.859985] ata4: SATA link down (SStatus 0 SControl 300)
[    0.860929] ata5: SATA link down (SStatus 0 SControl 300)
[    0.861844] ata6: SATA link down (SStatus 0 SControl 300)
[    0.862727] ata1: SATA link down (SStatus 0 SControl 300)
[    0.863666] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.864718] ata2: SATA link down (SStatus 0 SControl 300)
[    0.865540] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.866325] ata3.00: applying bridge limits
[    0.867037] ata3.00: configured for UDMA/100
[    0.868015] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.903215] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.904103] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.933980] IP-Config: Complete:
[    0.934460]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    0.935651]      host=192.168.7.2, domain=, nis-domain=(none)
[    0.936385]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.936386]      nameserver0=8.8.8.8
[    0.938061] md: Waiting for all devices to be available before autodetect
[    0.938699] md: If you don't use raid, use raid=noautodetect
[    0.939185] md: Autodetecting RAID arrays.
[    0.939573] md: autorun ...
[    0.939835] md: ... autorun DONE.
[    0.941470] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    0.942404] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.943166] devtmpfs: mounted
[    0.945028] Freeing unused kernel image (initmem) memory: 1936K
[    0.947580] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    0.948702] Write protecting the kernel read-only data: 22528k
[    0.948814] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    0.951713] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.952528] Freeing unused kernel image (rodata/data gap) memory: 364K
[    0.953273] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.016636] udevd[173]: starting version 3.2.11
[    1.022262] udevd[174]: starting eudev-3.2.11
[    1.064899] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.204553] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.257126] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.319555] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 10 21:25:12 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    1.564907] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCfUJ1F3pMpmoPb+DB29QPh01kHSgf1UKTGhRkLKCwTlQbH8pG1+lVHespJm2MBRIdJF5ivFT7yNfCoK5cV+hG+SRQ/s0nHDy4fQculjFJaFPDOFzSAM8J9w2vSP5Iv7CiyNwa4mHDpVUwPfWfisPix8DTMmYDtaeapAAyj0zjW0sVktnLo147CmEEeRqax2Hp3qHh7pJx2lBoXy7MQ9pJzg/Qf+7oSu3O6zSqTaKHJ7nB0vac0X2TDitKF8ZAPOYoPQUnVHTSvFNRYLxmVxsyJP02ZUpTEdq8HJF+149vDcH1cIiJ8TgJwSfwdO9kqT9abgMtGgAj0Qa/EnYcGNz+7 root@qemux86-64
Fingerprint: SHA256:V3GXQxVLt153TuVH+WVZv1fK7tnO0ZInskxutRTHwzs
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    1.785733] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
done
[    1.786842] Bluetooth: BNEP filters: protocol multicast
[    1.787798] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-jBFDaXKrZS,guid=a1998e213a2f64323e11cdc463e6b639
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
libGL error: glx: failed to create dri3 screen
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu

Poky (Yocto Project Reference Distro) 4.1.2 qemux86-64 /dev/ttyS0

qemux86-64 login: libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[663]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=670 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[663]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(connman-applet:637): Gdk-[1;35mCRITICAL[0m **: [34m21:25:13.342[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
