[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 1816457791 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2599.986 MHz processor [ 0.000964] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.008648] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.008812] ACPI: Early table checksum verification disabled [ 0.008828] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS ) [ 0.008836] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008847] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008854] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008858] ACPI: FACS 0x000000001FFE0000 000040 [ 0.008862] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008865] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008868] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008872] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.008875] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6] [ 0.008876] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2] [ 0.008877] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.008878] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366] [ 0.008879] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e] [ 0.008879] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da] [ 0.008880] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402] [ 0.012684] Zone ranges: [ 0.012686] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.012689] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.012691] Normal empty [ 0.012692] Movable zone start for each node [ 0.012693] Early memory node ranges [ 0.012693] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.012695] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.012697] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.014978] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.014995] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.021306] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.021891] ACPI: PM-Timer IO Port: 0x608 [ 0.021904] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.021944] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.021948] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.021950] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.021952] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.021957] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.021958] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.021962] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.021964] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.021970] TSC deadline timer available [ 0.021972] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.022004] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.022005] Booting paravirtualized kernel on KVM [ 0.022011] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.022017] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.024067] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.024111] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.024113] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.024434] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.024569] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.026579] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.030255] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved) [ 0.030324] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.030333] Kernel/User page tables isolation: enabled [ 0.030351] ftrace: allocating 47075 entries in 184 pages [ 0.043328] ftrace: allocated 184 pages with 4 groups [ 0.043419] Dynamic Preempt: full [ 0.045590] rcu: Preemptible hierarchical RCU implementation. [ 0.045591] rcu: RCU event tracing is enabled. [ 0.045592] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.045594] All grace periods are expedited (rcu_expedited). [ 0.045595] Trampoline variant of Tasks RCU enabled. [ 0.045596] Rude variant of Tasks RCU enabled. [ 0.045596] Tracing variant of Tasks RCU enabled. [ 0.045597] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.045598] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.050031] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.050215] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.050331] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.050346] random: crng init done [ 0.056729] Console: colour VGA+ 80x25 [ 0.168285] printk: console [ttyS0] enabled [ 0.168972] ACPI: Core revision 20220331 [ 0.169770] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.171329] APIC: Switch to symmetric I/O mode setup [ 0.172429] x2apic enabled [ 0.173155] Switched APIC routing to physical x2apic. [ 0.175175] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.176231] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns [ 0.178951] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599986) [ 0.179952] pid_max: default: 32768 minimum: 301 [ 0.180702] LSM: Security Framework initializing [ 0.180961] landlock: Up and running. [ 0.182953] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.183953] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.185291] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.185955] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.186952] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.187953] Spectre V2 : Mitigation: Retpolines [ 0.188951] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.189951] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.190951] Speculative Store Bypass: Vulnerable [ 0.191687] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.191951] MMIO Stale Data: Unknown: No mitigations [ 0.192951] SRBDS: Unknown: Dependent on hypervisor status [ 0.212629] Freeing SMP alternatives memory: 52K [ 0.213119] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.214142] cblist_init_generic: Setting adjustable number of callback queues. [ 0.214953] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.215938] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.215976] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.216956] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.218009] rcu: Hierarchical SRCU implementation. [ 0.218773] rcu: Max phase no-delay instances is 400. [ 0.219266] smp: Bringing up secondary CPUs ... [ 0.220083] x86: Booting SMP configuration: [ 0.220765] .... node #0, CPUs: #1 #2 #3 [ 0.222533] smp: Brought up 1 node, 4 CPUs [ 0.223617] smpboot: Max logical packages: 1 [ 0.223952] smpboot: Total of 4 processors activated (20799.88 BogoMIPS) [ 0.225278] devtmpfs: initialized [ 0.226117] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.226962] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.227997] pinctrl core: initialized pinctrl subsystem [ 0.230162] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.231099] thermal_sys: Registered thermal governor 'step_wise' [ 0.231100] thermal_sys: Registered thermal governor 'user_space' [ 0.232043] cpuidle: using governor menu [ 0.237199] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.238956] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.239972] PCI: Using configuration type 1 for base access [ 0.242214] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.261955] raid6: sse2x4 gen() 10343 MB/s [ 0.278954] raid6: sse2x2 gen() 15032 MB/s [ 0.296954] raid6: sse2x1 gen() 11520 MB/s [ 0.297701] raid6: using algorithm sse2x2 gen() 15032 MB/s [ 0.314953] raid6: .... xor() 10340 MB/s, rmw enabled [ 0.315803] raid6: using ssse3x2 recovery algorithm [ 0.316046] ACPI: Added _OSI(Module Device) [ 0.316731] ACPI: Added _OSI(Processor Device) [ 0.316953] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.317714] ACPI: Added _OSI(Processor Aggregator Device) [ 0.317953] ACPI: Added _OSI(Linux-Dell-Video) [ 0.318647] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.318965] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.320628] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.322114] ACPI: Interpreter enabled [ 0.322734] ACPI: PM: (supports S0 S3 S5) [ 0.322954] ACPI: Using IOAPIC for interrupt routing [ 0.323747] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.323953] PCI: Using E820 reservations for host bridge windows [ 0.325007] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.327759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.327959] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.328993] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.330003] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.331010] PCI host bridge to bus 0000:00 [ 0.331682] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.331953] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.332953] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.333962] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.334952] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.335952] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.336953] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.337904] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.338634] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.339955] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.341954] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.345955] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.348820] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.350430] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.351764] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.354808] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.356802] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.358566] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.360971] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.362971] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff] [ 0.366566] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.367070] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.368874] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.369955] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.371954] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.376743] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.380170] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.382954] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.385013] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.387932] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.389335] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.391840] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.392964] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.394390] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.397152] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.398488] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.399324] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.404310] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.405600] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.406996] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.409863] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.411225] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.412048] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.413033] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.414029] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.415028] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.416028] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.417030] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.418028] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.418986] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.419944] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.419964] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.420908] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.420960] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.421908] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.421961] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.422922] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.423461] SCSI subsystem initialized [ 0.424115] ACPI: bus type USB registered [ 0.425002] usbcore: registered new interface driver usbfs [ 0.425893] usbcore: registered new interface driver hub [ 0.425961] usbcore: registered new device driver usb [ 0.426767] pps_core: LinuxPPS API ver. 1 registered [ 0.426953] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.427956] PTP clock support registered [ 0.429093] Bluetooth: Core ver 2.22 [ 0.429690] NET: Registered PF_BLUETOOTH protocol family [ 0.429953] Bluetooth: HCI device and connection manager initialized [ 0.430960] Bluetooth: HCI socket layer initialized [ 0.431720] Bluetooth: L2CAP socket layer initialized [ 0.431959] Bluetooth: SCO socket layer initialized [ 0.432750] PCI: Using ACPI for IRQ routing [ 0.517003] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.517950] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.517950] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.517958] vgaarb: loaded [ 0.518447] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.518953] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.523041] clocksource: Switched to clocksource kvm-clock [ 0.524049] pnp: PnP ACPI init [ 0.524746] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.526154] pnp: PnP ACPI: found 6 devices [ 0.548018] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.549920] NET: Registered PF_INET protocol family [ 0.551315] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.553307] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.555045] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.556615] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.558210] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.559685] TCP: Hash tables configured (established 4096 bind 4096) [ 0.561032] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.562401] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.563872] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.565161] RPC: Registered named UNIX socket transport module. [ 0.566326] RPC: Registered udp transport module. [ 0.568334] RPC: Registered tcp transport module. [ 0.569578] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.571505] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.575213] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.577292] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.579579] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.581830] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.583331] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.584773] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.586418] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.587947] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.589442] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.590950] PCI: CLS 0 bytes, default 64 [ 0.591678] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a2ed2992, max_idle_ns: 440795215955 ns [ 0.594519] Initialise system trusted keyrings [ 0.595429] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.597927] NFS: Registering the id_resolver key type [ 0.598771] Key type id_resolver registered [ 0.599426] Key type id_legacy registered [ 0.600662] Key type cifs.idmap registered [ 0.610023] xor: automatically using best checksumming function avx [ 0.611176] Key type asymmetric registered [ 0.611829] Asymmetric key parser 'x509' registered [ 0.612617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.613776] io scheduler mq-deadline registered [ 0.614491] io scheduler kyber registered [ 0.615762] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.620114] ACPI: button: Power Button [PWRF] [ 0.622207] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.625858] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.629843] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.632512] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.634762] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.637563] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.639046] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.640483] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.642760] Linux agpgart interface v0.103 [ 0.643590] ACPI: bus type drm_connector registered [ 0.644527] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.645418] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.656153] Console: switching to colour dummy device 80x25 [ 0.657357] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.657359] [drm] features: -context_init [ 0.659841] [drm] number of scanouts: 1 [ 0.660470] [drm] number of cap sets: 0 [ 0.661747] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.667536] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.693529] Console: switching to colour frame buffer device 160x50 [ 0.726181] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.731574] brd: module loaded [ 0.733656] loop: module loaded [ 0.734372] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.739103] virtio_blk virtio3: [vda] 1256636 512-byte logical blocks (643 MB/614 MiB) [ 0.743598] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.744925] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.747007] scsi host0: ahci [ 0.747805] scsi host1: ahci [ 0.748536] scsi host2: ahci [ 0.749387] scsi host3: ahci [ 0.751378] scsi host4: ahci [ 0.753091] scsi host5: ahci [ 0.754732] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32 [ 0.757056] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32 [ 0.758930] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32 [ 0.760850] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32 [ 0.762709] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32 [ 0.764547] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32 [ 0.768246] e100: Intel(R) PRO/100 Network Driver [ 0.769064] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.769932] e1000: Intel(R) PRO/1000 Network Driver [ 0.770719] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.771631] e1000e: Intel(R) PRO/1000 Network Driver [ 0.772407] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.773337] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.774182] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.775076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.776081] ehci-pci: EHCI PCI platform driver [ 0.777423] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.778277] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.779672] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000 [ 0.786991] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.788209] hub 1-0:1.0: USB hub found [ 0.788827] hub 1-0:1.0: 6 ports detected [ 0.789635] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.790689] ohci-pci: OHCI PCI platform driver [ 0.791391] uhci_hcd: USB Universal Host Controller Interface driver [ 0.792913] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.793748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.795044] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.796229] hub 2-0:1.0: USB hub found [ 0.796860] hub 2-0:1.0: 2 ports detected [ 0.798212] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.799057] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.800478] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.801635] hub 3-0:1.0: USB hub found [ 0.802273] hub 3-0:1.0: 2 ports detected [ 0.803611] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.804444] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.815519] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.816813] hub 4-0:1.0: USB hub found [ 0.817451] hub 4-0:1.0: 2 ports detected [ 0.818291] usbcore: registered new interface driver usb-storage [ 0.819321] usbcore: registered new interface driver usbserial_generic [ 0.820359] usbserial: USB Serial support registered for generic [ 0.821488] usbcore: registered new interface driver ftdi_sio [ 0.822429] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.823594] usbcore: registered new interface driver pl2303 [ 0.824466] usbserial: USB Serial support registered for pl2303 [ 0.825408] i8042: PNP: No PS/2 controller found. [ 0.826252] mousedev: PS/2 mouse device common for all mice [ 0.827352] rtc_cmos 00:04: RTC can wake from S4 [ 0.829854] rtc_cmos 00:04: registered as rtc0 [ 0.830692] rtc_cmos 00:04: setting system clock to 2023-02-18T17:40:02 UTC (1676742002) [ 0.831970] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.833456] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.834430] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.835327] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.836837] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.838241] intel_pstate: CPU model not supported [ 0.839019] sdhci: Secure Digital Host Controller Interface driver [ 0.839970] sdhci: Copyright(c) Pierre Ossman [ 0.840657] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.841628] usbcore: registered new interface driver usbhid [ 0.842513] usbhid: USB HID core driver [ 0.843151] u32 classifier [ 0.843575] input device check on [ 0.844244] Actions configured [ 0.844902] NET: Registered PF_INET6 protocol family [ 0.846159] Segment Routing with IPv6 [ 0.846780] In-situ OAM (IOAM) with IPv6 [ 0.847416] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.848466] NET: Registered PF_PACKET protocol family [ 0.849298] Bridge firewalling registered [ 0.849963] Key type dns_resolver registered [ 0.850826] NET: Registered PF_VSOCK protocol family [ 0.852127] IPI shorthand broadcast: enabled [ 0.852844] sched_clock: Marking stable (727360649, 124727936)->(941282455, -89193870) [ 0.854281] Loading compiled-in X.509 certificates [ 0.855242] Key type ._fscrypt registered [ 0.855897] Key type .fscrypt registered [ 0.856525] Key type fscrypt-provisioning registered [ 0.857571] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.860609] Key type encrypted registered [ 0.866555] printk: console [netcon0] enabled [ 0.867285] netconsole: network logging started [ 1.032054] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.083334] ata5: SATA link down (SStatus 0 SControl 300) [ 1.084758] ata1: SATA link down (SStatus 0 SControl 300) [ 1.085888] ata4: SATA link down (SStatus 0 SControl 300) [ 1.087653] ata2: SATA link down (SStatus 0 SControl 300) [ 1.090447] ata6: SATA link down (SStatus 0 SControl 300) [ 1.092839] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.094717] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.096179] ata3.00: applying bridge limits [ 1.097691] ata3.00: configured for UDMA/100 [ 1.099313] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.136640] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.139131] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.169606] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.171985] IP-Config: Complete: [ 1.174598] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.175375] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.182624] host=192.168.7.2, domain=, nis-domain=(none) [ 1.183987] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.183990] nameserver0=8.8.8.8 [ 1.186649] md: Waiting for all devices to be available before autodetect [ 1.187374] md: If you don't use raid, use raid=noautodetect [ 1.187961] md: Autodetecting RAID arrays. [ 1.188382] md: autorun ... [ 1.188678] md: ... autorun DONE. [ 1.190947] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.193237] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.195028] devtmpfs: mounted [ 1.198461] Freeing unused kernel image (initmem) memory: 1936K [ 1.199789] Write protecting the kernel read-only data: 22528k [ 1.203525] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.205150] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.206604] Run /sbin/init as init process INIT: version 3.04 booting [ 1.294005] usb 1-2: new high-speed USB device number 3 using ehci-pci warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.425393] udevd[173]: starting version 3.2.11 [ 1.434714] udevd[174]: starting eudev-3.2.11 [ 1.443609] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.508348] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.663102] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 1.806033] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.6 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 18 17:40:02 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDArozRId3H+ORG/LsnbR+kmunPv3WtnpLh3Jc/s+mqMrl2w4ERwePky4xpjccc5/+PMW+6+7f8XooHW5oPx/ysF/SSP7duOzO1SBVTC00xX6VBgWLTIIbyQFUtgSGze1rt3W6SdtUPwTexSrgTOcT59fdswAjgvxvsOjKzXKp9raCsHf6yR1dtYsTi/miv6kH27idtc62oglkoWxYXwGGszDA1zxMoc5jJqSlQqooaszLNjvJc2advDiZwQa/GACQiyPUeq6uQ+uFYI9zv3cQMySrj3lHrdVMlXXW7tXZyTr3TlEiMDJW4cKE7AQ6lUz0Gn/lIDU0ktpML9U2/WXoH root@qemux86-64 Fingerprint: SHA256:qk2JDCjJ+4FrzrabVbtHj1fDl3B7Xqu3Den01b8nEtc dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. D-BUS per-session daemon address is: unix:path=/tmp/dbus-vNXEHF2lNu,guid=5a7d17b78748fc0ad5fcc9e263f10d72 [ 2.606836] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.607478] Bluetooth: BNEP filters: protocol multicast [ 2.607485] Bluetooth: BNEP socket layer initialized Starting syslogd/klogd: Using calibration data stored in /etc/pointercal.xinput done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu [settings daemon] Forking. run with -n to prevent fork Poky (Yocto Project Reference Distro) 4.1.2 qemux86-64 /dev/ttyS0 qemux86-64 login: dbus-daemon[647]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=668 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[647]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (connman-applet:614): Gdk-[1;35mCRITICAL[0m **: [34m17:40:03.476[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed