[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000143] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000328] Switching to timer-based delay loop, resolution 16ns [ 0.013411] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.021084] Console: colour dummy device 80x30 [ 0.022444] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.022713] pid_max: default: 32768 minimum: 301 [ 0.023764] LSM: Security Framework initializing [ 0.024702] landlock: Up and running. [ 0.028685] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.028754] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.048225] CPU: Testing write buffer coherency: ok [ 0.050707] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.050898] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.062587] /cpus/cpu@0 missing clock-frequency property [ 0.062975] /cpus/cpu@1 missing clock-frequency property [ 0.063053] /cpus/cpu@2 missing clock-frequency property [ 0.063124] /cpus/cpu@3 missing clock-frequency property [ 0.063752] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.074545] cblist_init_generic: Setting adjustable number of callback queues. [ 0.074708] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.075282] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.075957] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.077094] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.078316] rcu: Hierarchical SRCU implementation. [ 0.078367] rcu: Max phase no-delay instances is 1000. [ 0.085335] smp: Bringing up secondary CPUs ... [ 0.092197] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.092287] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.099543] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.099595] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.104049] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.104097] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.104648] smp: Brought up 1 node, 4 CPUs [ 0.104754] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.104833] CPU: All CPU(s) started in SVC mode. [ 0.118157] devtmpfs: initialized [ 0.133225] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.155462] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.156631] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.179909] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.184413] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.206490] cpuidle: using governor ladder [ 0.209900] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.210043] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.211938] Serial: AMBA PL011 UART driver [ 0.253713] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.264870] printk: console [ttyAMA0] enabled [ 0.315494] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.322743] cryptd: max_cpu_qlen set to 1000 [ 0.490933] raid6: neonx8 gen() 555 MB/s [ 0.662743] raid6: neonx4 gen() 1555 MB/s [ 0.834765] raid6: neonx2 gen() 1555 MB/s [ 1.007711] raid6: neonx1 gen() 988 MB/s [ 1.181909] raid6: int32x8 gen() 131 MB/s [ 1.359096] raid6: int32x4 gen() 147 MB/s [ 1.529881] raid6: int32x2 gen() 207 MB/s [ 1.702581] raid6: int32x1 gen() 411 MB/s [ 1.702829] raid6: using algorithm neonx4 gen() 1555 MB/s [ 1.875440] raid6: .... xor() 764 MB/s, rmw enabled [ 1.875730] raid6: using neon recovery algorithm [ 1.880392] SCSI subsystem initialized [ 1.881543] usbcore: registered new interface driver usbfs [ 1.882019] usbcore: registered new interface driver hub [ 1.882410] usbcore: registered new device driver usb [ 1.883256] pps_core: LinuxPPS API ver. 1 registered [ 1.883386] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.883677] PTP clock support registered [ 1.897969] vgaarb: loaded [ 1.903283] clocksource: Switched to clocksource arch_sys_counter [ 1.947199] NET: Registered PF_INET protocol family [ 1.949653] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.963785] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.964065] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.964302] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.964608] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.964900] TCP: Hash tables configured (established 2048 bind 2048) [ 1.966338] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.966717] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.968755] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.973359] RPC: Registered named UNIX socket transport module. [ 1.973533] RPC: Registered udp transport module. [ 1.973641] RPC: Registered tcp transport module. [ 1.973742] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.973980] PCI: CLS 0 bytes, default 64 [ 2.181623] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.212286] NFS: Registering the id_resolver key type [ 2.213766] Key type id_resolver registered [ 2.213907] Key type id_legacy registered [ 2.218857] Key type cifs.idmap registered [ 2.310804] xor: measuring software checksum speed [ 2.323056] arm4regs : 856 MB/sec [ 2.332906] 8regs : 1035 MB/sec [ 2.343340] 32regs : 976 MB/sec [ 2.352511] neon : 1105 MB/sec [ 2.352926] xor: using function: neon (1105 MB/sec) [ 2.353093] async_tx: api initialized (async) [ 2.354346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.354663] io scheduler mq-deadline registered [ 2.354863] io scheduler kyber registered [ 2.360951] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.361910] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.362953] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.363952] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.365745] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.366097] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.366313] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.366471] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.368024] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 2.371844] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 2.372361] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 2.372734] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.372948] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.373839] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 2.374022] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.375250] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 2.375452] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.375612] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.377619] PCI: bus0: Fast back to back transfers disabled [ 2.379296] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 2.379734] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 2.379979] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 2.380187] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 2.380350] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 2.380511] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 2.383746] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.395200] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.398325] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.429303] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.430554] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.430601] [drm] features: -context_init [ 2.433563] [drm] number of scanouts: 1 [ 2.433838] printk: console [hvc0] enabled [ 2.446118] [drm] number of cap sets: 0 [ 2.461290] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 2.523794] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 2.570829] Console: switching to colour frame buffer device 160x50 [ 2.597994] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.648708] brd: module loaded [ 2.649697] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.655245] virtio_blk virtio1: [vda] 25440 512-byte logical blocks (13.0 MB/12.4 MiB) [ 2.678585] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.679444] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.684660] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.689146] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.689477] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.689875] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.699566] hub 1-0:1.0: USB hub found [ 2.700512] hub 1-0:1.0: 4 ports detected [ 2.706426] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.709183] hub 2-0:1.0: USB hub found [ 2.709676] hub 2-0:1.0: 4 ports detected [ 2.726162] rtc-pl031 9010000.pl031: registered as rtc0 [ 2.727331] rtc-pl031 9010000.pl031: setting system clock to 2023-02-23T09:57:14 UTC (1677146234) [ 2.731421] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 2.736009] usbcore: registered new interface driver usbhid [ 2.736302] usbhid: USB HID core driver [ 2.737060] u32 classifier [ 2.737243] input device check on [ 2.737450] Actions configured [ 2.740076] NET: Registered PF_INET6 protocol family [ 2.749632] Segment Routing with IPv6 [ 2.750094] In-situ OAM (IOAM) with IPv6 [ 2.751090] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.755264] NET: Registered PF_PACKET protocol family [ 2.756301] Bridge firewalling registered [ 2.757560] Key type dns_resolver registered [ 2.758664] NET: Registered PF_VSOCK protocol family [ 2.759957] Registering SWP/SWPB emulation handler [ 2.786437] registered taskstats version 1 [ 2.788487] Key type .fscrypt registered [ 2.788734] Key type fscrypt-provisioning registered [ 2.796620] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.799919] Key type encrypted registered [ 2.840580] printk: console [netcon0] enabled [ 2.840922] netconsole: network logging started [ 2.903516] IP-Config: Complete: [ 2.903910] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 2.904596] host=192.168.7.8, domain=, nis-domain=(none) [ 2.904866] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.904924] nameserver0=8.8.8.8 [ 2.915050] md: Waiting for all devices to be available before autodetect [ 2.915534] md: If you don't use raid, use raid=noautodetect [ 2.915943] md: Autodetecting RAID arrays. [ 2.916212] md: autorun ... [ 2.916469] md: ... autorun DONE. [ 2.985825] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 2.989557] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.993244] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.994871] devtmpfs: mounted [ 3.191134] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.194332] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.226006] Freeing unused kernel image (initmem) memory: 2048K [ 3.377511] Run /sbin/init as init process [ 3.442883] usb 1-2: new high-speed USB device number 3 using xhci_hcd INIT: version 3.04 booting [ 3.630282] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.694091] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 Starting udev [ 4.599568] udevd[165]: starting version 3.2.11 [ 4.692281] udevd[166]: starting eudev-3.2.11 [ 5.329084] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 5.517943] uart-pl011 9000000.pl011: no DMA platform data Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1+snapshot-917b25452e81fc3f38047dbb00f8f2d3f4472a2c qemuarm /dev/hvc0 qemuarm login: