[    0.000416] Switching to timer-based delay loop, resolution 16ns
[    0.011747] Console: colour dummy device 80x30
[    0.013377] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.013628] pid_max: default: 32768 minimum: 301
[    0.014792] LSM: Security Framework initializing
[    0.015984] landlock: Up and running.
[    0.018687] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.018772] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.044108] CPU: Testing write buffer coherency: ok
[    0.046770] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.046983] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.060302] /cpus/cpu@0 missing clock-frequency property
[    0.060762] /cpus/cpu@1 missing clock-frequency property
[    0.060853] /cpus/cpu@2 missing clock-frequency property
[    0.060933] /cpus/cpu@3 missing clock-frequency property
[    0.061150] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.080805] Setting up static identity map for 0x40200000 - 0x40200060
[    0.082005] rcu: Hierarchical SRCU implementation.
[    0.088426] smp: Bringing up secondary CPUs ...
[    0.095910] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.096084] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.109480] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.109613] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.114657] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.114768] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.115798] smp: Brought up 1 node, 4 CPUs
[    0.115935] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.116042] CPU: All CPU(s) started in SVC mode.
[    0.142141] devtmpfs: initialized
[    0.157390] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.185592] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.186854] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.216625] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.222610] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.247029] cpuidle: using governor ladder
[    0.249640] hw-breakpoint: CPU 0 debug is powered down!
[    0.257072] Serial: AMBA PL011 UART driver
[    0.362320] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 62, base_baud = 0) is a PL011 rev1
[    0.378065] printk: console [ttyAMA0] enabled
[    0.442697] Kprobes globally optimized
[    0.472619] cryptd: max_cpu_qlen set to 1000
[    0.669837] raid6: neonx8   gen()   360 MB/s
[    0.848821] raid6: neonx8   xor()   337 MB/s
[    1.021200] raid6: neonx4   gen()   931 MB/s
[    1.199127] raid6: neonx4   xor()   612 MB/s
[    1.375771] raid6: neonx2   gen()  1015 MB/s
[    1.548173] raid6: neonx2   xor()   607 MB/s
[    1.726167] raid6: neonx1   gen()   593 MB/s
[    1.902836] raid6: neonx1   xor()   449 MB/s
[    2.075205] raid6: int32x8  gen()    82 MB/s
[    2.252016] raid6: int32x8  xor()    44 MB/s
[    2.429080] raid6: int32x4  gen()    89 MB/s
[    2.601486] raid6: int32x4  xor()    68 MB/s
[    2.779259] raid6: int32x2  gen()   257 MB/s
[    2.956475] raid6: int32x2  xor()   194 MB/s
[    3.128680] raid6: int32x1  gen()   225 MB/s
[    3.306040] raid6: int32x1  xor()   191 MB/s
[    3.306355] raid6: using algorithm neonx2 gen() 1015 MB/s
[    3.306537] raid6: .... xor() 607 MB/s, rmw enabled
[    3.306815] raid6: using neon recovery algorithm
[    3.310610] vgaarb: loaded
[    3.313829] SCSI subsystem initialized
[    3.315281] usbcore: registered new interface driver usbfs
[    3.316093] usbcore: registered new interface driver hub
[    3.316689] usbcore: registered new device driver usb
[    3.317636] pps_core: LinuxPPS API ver. 1 registered
[    3.317809] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.318198] PTP clock support registered
[    3.345869] clocksource: Switched to clocksource arch_sys_counter
[    3.786239] NET: Registered PF_INET protocol family
[    3.788210] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    3.801413] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.801770] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    3.802058] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.802497] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    3.802883] TCP: Hash tables configured (established 4096 bind 4096)
[    3.805196] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.805678] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.808412] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    3.815272] RPC: Registered named UNIX socket transport module.
[    3.815500] RPC: Registered udp transport module.
[    3.815653] RPC: Registered tcp transport module.
[    3.815792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.816124] PCI: CLS 0 bytes, default 64
[    4.541104] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    4.610944] NFS: Registering the id_resolver key type
[    4.613758] Key type id_resolver registered
[    4.614527] Key type id_legacy registered
[    4.625289] Key type cifs.idmap registered
[    4.774742] xor: measuring software checksum speed
[    4.790366]    arm4regs        :   665 MB/sec
[    4.804408]    8regs           :   752 MB/sec
[    4.818198]    32regs          :   744 MB/sec
[    4.833526]    neon            :   720 MB/sec
[    4.833727] xor: using function: 8regs (752 MB/sec)
[    4.834189] async_tx: api initialized (async)
[    4.835205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.835594] io scheduler mq-deadline registered
[    4.835856] io scheduler kyber registered
[    4.841372] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    4.842586] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    4.843600] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    4.845173] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    4.847573] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    4.847993] pci_bus 0000:00: root bus resource [bus 00-0f]
[    4.848271] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    4.848479] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    4.850461] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    4.855574] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    4.856196] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    4.856491] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    4.857635] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    4.857895] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    4.859451] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    4.859685] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    4.859891] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    4.862744] PCI: bus0: Fast back to back transfers disabled
[    4.865081] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    4.865637] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    4.865969] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    4.866240] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    4.866459] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    4.868325] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    4.881410] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    4.885294] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    4.918312] random: crng init done
[    4.918856] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    4.919838] [drm] features: -virgl +edid -resource_blob -host_visible
[    4.926106] [drm] number of scanouts: 1
[    4.926265] [drm] number of cap sets: 0
[    4.945087] [drm] Initialized virtio_gpu 0.1.0 0 for virtio4 on minor 0
[    4.945545] printk: console [hvc0] enabled
[    5.016794] virtio_gpu virtio4: [drm] drm_plane_enable_fb_damage_clips() not called
[    5.087414] Console: switching to colour frame buffer device 128x48
[    5.115766] virtio_gpu virtio4: [drm] fb0: virtio_gpudrmfb frame buffer device
[    5.217252] brd: module loaded
[    5.230885] virtio_blk virtio1: [vda] 856548 512-byte logical blocks (439 MB/418 MiB)
[    5.283777] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    5.286378] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    5.299733] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    5.310423] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    5.311215] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    5.312090] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    5.333276] hub 1-0:1.0: USB hub found
[    5.335883] hub 1-0:1.0: 4 ports detected
[    5.347137] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.351681] hub 2-0:1.0: USB hub found
[    5.352623] hub 2-0:1.0: 4 ports detected
[    5.369833] rtc-pl031 9010000.pl031: registered as rtc0
[    5.371805] rtc-pl031 9010000.pl031: setting system clock to 2023-03-07T17:19:21 UTC (1678209561)
[    5.377932] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    5.385291] usbcore: registered new interface driver usbhid
[    5.385784] usbhid: USB HID core driver
[    5.387106] u32 classifier
[    5.387428]     input device check on
[    5.387769]     Actions configured
[    5.391437] NET: Registered PF_INET6 protocol family
[    5.405788] Segment Routing with IPv6
[    5.406290] In-situ OAM (IOAM) with IPv6
[    5.407575] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    5.412029] NET: Registered PF_PACKET protocol family
[    5.414239] Bridge firewalling registered
[    5.415807] Key type dns_resolver registered
[    5.416831] NET: Registered PF_VSOCK protocol family
[    5.418155] Registering SWP/SWPB emulation handler
[    5.468931] Key type .fscrypt registered
[    5.469474] Key type fscrypt-provisioning registered
[    5.488069] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    5.504700] Key type encrypted registered
[    5.511105] printk: console [netcon0] enabled
[    5.511958] netconsole: network logging started
[    5.615286] IP-Config: Complete:
[    5.616022]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    5.617576]      host=192.168.7.8, domain=, nis-domain=(none)
[    5.618198]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    5.618344]      nameserver0=8.8.8.8
[    5.635088] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    5.638399] md: Waiting for all devices to be available before autodetect
[    5.639126] md: If you don't use raid, use raid=noautodetect
[    5.639818] md: Autodetecting RAID arrays.
[    5.640404] md: autorun ...
[    5.640831] md: ... autorun DONE.
[    5.726108] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    5.729773] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    5.735769] devtmpfs: mounted
[    5.953692] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    5.960099] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    5.969015] Freeing unused kernel image (initmem) memory: 2048K
[    6.226613] Run /sbin/init as init process
[    6.317483] usb 1-2: new high-speed USB device number 3 using xhci_hcd
INIT: version 3.01 booting
[    6.541548] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    6.606157] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    9.556359] udevd[171]: starting version 3.2.10
[    9.717941] udevd[172]: starting eudev-3.2.10
[   12.823439] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
[   13.749781] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: dropbear.

X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 5.15.91-yocto-standard #1 SMP PREEMPT Wed Feb 1 14:45:58 UTC 2023 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar  7 17:19:38 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Errors from xkbcomp are not fatal to the X server
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.0.8 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-MCWosgimEJ,guid=fd7802600b28d5d22b11614a6407722e
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[631]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=609 comm="connman-applet")
matchbox-wm: X error warning (0xa00003): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[631]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
