[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 419798269 cycles
[    0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000010] tsc: Detected 2599.996 MHz processor
[    0.001017] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001054] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009795] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.010035] ACPI: Early table checksum verification disabled
[    0.010065] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.010073] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010086] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010092] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010096] ACPI: FACS 0x000000001FFE0000 000040
[    0.010100] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010104] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010107] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010111] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010114] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6]
[    0.010116] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2]
[    0.010116] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.010117] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366]
[    0.010118] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e]
[    0.010119] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da]
[    0.010120] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402]
[    0.010212] Zone ranges:
[    0.010213]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010215]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.010217]   Normal   empty
[    0.010218] Movable zone start for each node
[    0.010218] Early memory node ranges
[    0.010219]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010221]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.010224] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.010621] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010637] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012264] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012782] ACPI: PM-Timer IO Port: 0x608
[    0.012797] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012840] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012844] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012846] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012847] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012851] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012852] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012858] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012859] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012864] TSC deadline timer available
[    0.012867] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012914] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.012916] Booting paravirtualized kernel on KVM
[    0.012925] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012936] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.013504] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.013557] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.013559] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013708] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.013754] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.014314] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.015681] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved)
[    0.015741] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.015753] Kernel/User page tables isolation: enabled
[    0.015774] ftrace: allocating 47075 entries in 184 pages
[    0.026931] ftrace: allocated 184 pages with 4 groups
[    0.027010] Dynamic Preempt: full
[    0.027417] rcu: Preemptible hierarchical RCU implementation.
[    0.027418] rcu: 	RCU event tracing is enabled.
[    0.027419] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.027420] 	All grace periods are expedited (rcu_expedited).
[    0.027421] 	Trampoline variant of Tasks RCU enabled.
[    0.027421] 	Rude variant of Tasks RCU enabled.
[    0.027422] 	Tracing variant of Tasks RCU enabled.
[    0.027423] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.027424] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.032118] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.032290] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.032404] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.032426] random: crng init done
[    0.037998] Console: colour VGA+ 80x25
[    0.141452] printk: console [ttyS0] enabled
[    0.142043] ACPI: Core revision 20220331
[    0.142810] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.144263] APIC: Switch to symmetric I/O mode setup
[    0.145211] x2apic enabled
[    0.145935] Switched APIC routing to physical x2apic.
[    0.147797] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.148769] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.150315] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.151316] pid_max: default: 32768 minimum: 301
[    0.152014] LSM: Security Framework initializing
[    0.152327] landlock: Up and running.
[    0.153765] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.154317] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.155791] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.156337] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157326] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158320] Spectre V2 : Mitigation: Retpolines
[    0.159316] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.160316] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.161319] Speculative Store Bypass: Vulnerable
[    0.162136] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.162317] MMIO Stale Data: Unknown: No mitigations
[    0.163228] SRBDS: Unknown: Dependent on hypervisor status
[    0.170878] Freeing SMP alternatives memory: 52K
[    0.171494] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.172530] cblist_init_generic: Setting adjustable number of callback queues.
[    0.173319] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.174279] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.174340] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.175305] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.175389] rcu: Hierarchical SRCU implementation.
[    0.176163] rcu: 	Max phase no-delay instances is 400.
[    0.176616] smp: Bringing up secondary CPUs ...
[    0.177398] x86: Booting SMP configuration:
[    0.178108] .... node  #0, CPUs:      #1 #2 #3
[    0.179719] smp: Brought up 1 node, 4 CPUs
[    0.181216] smpboot: Max logical packages: 1
[    0.181318] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.182619] devtmpfs: initialized
[    0.183595] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.184326] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.185361] pinctrl core: initialized pinctrl subsystem
[    0.186479] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.187476] thermal_sys: Registered thermal governor 'step_wise'
[    0.187478] thermal_sys: Registered thermal governor 'user_space'
[    0.188384] cpuidle: using governor menu
[    0.191574] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.193324] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.195349] PCI: Using configuration type 1 for base access
[    0.200713] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.218317] raid6: sse2x4   gen() 15420 MB/s
[    0.235317] raid6: sse2x2   gen() 15323 MB/s
[    0.252318] raid6: sse2x1   gen() 11840 MB/s
[    0.252998] raid6: using algorithm sse2x4 gen() 15420 MB/s
[    0.270317] raid6: .... xor() 7904 MB/s, rmw enabled
[    0.271088] raid6: using ssse3x2 recovery algorithm
[    0.271412] ACPI: Added _OSI(Module Device)
[    0.272064] ACPI: Added _OSI(Processor Device)
[    0.272318] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.273032] ACPI: Added _OSI(Processor Aggregator Device)
[    0.273319] ACPI: Added _OSI(Linux-Dell-Video)
[    0.273987] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.274326] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.275944] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.277496] ACPI: Interpreter enabled
[    0.278062] ACPI: PM: (supports S0 S3 S5)
[    0.278318] ACPI: Using IOAPIC for interrupt routing
[    0.279076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.279318] PCI: Using E820 reservations for host bridge windows
[    0.280278] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.282138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.282327] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.283369] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.284353] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.285375] PCI host bridge to bus 0000:00
[    0.286043] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.286318] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.287255] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.287318] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.288317] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.289318] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.290318] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.291147] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.291934] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.293319] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.295124] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.298880] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.300320] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.302030] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.303320] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.307169] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.308797] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.311330] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.314337] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.316336] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.319320] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.320423] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.322142] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.323321] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.325031] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.328985] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.331143] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.333320] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.335355] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.338015] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.339264] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.341242] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.343792] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.344734] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.347528] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.348817] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.349592] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.353671] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.354945] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.356387] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.361588] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.363926] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.364403] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.365363] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.366324] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.367280] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.367392] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.368369] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.369342] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.370242] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.370328] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.371206] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.371328] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.372208] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.372327] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.373224] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.373327] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.374686] SCSI subsystem initialized
[    0.375444] ACPI: bus type USB registered
[    0.375983] usbcore: registered new interface driver usbfs
[    0.376331] usbcore: registered new interface driver hub
[    0.377077] usbcore: registered new device driver usb
[    0.377336] pps_core: LinuxPPS API ver. 1 registered
[    0.378034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.378321] PTP clock support registered
[    0.379367] Bluetooth: Core ver 2.22
[    0.379922] NET: Registered PF_BLUETOOTH protocol family
[    0.380318] Bluetooth: HCI device and connection manager initialized
[    0.381245] Bluetooth: HCI socket layer initialized
[    0.381318] Bluetooth: L2CAP socket layer initialized
[    0.382027] Bluetooth: SCO socket layer initialized
[    0.382391] PCI: Using ACPI for IRQ routing
[    0.441767] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.442247] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.442314] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.442321] vgaarb: loaded
[    0.443392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.444093] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.448409] clocksource: Switched to clocksource kvm-clock
[    0.449324] pnp: PnP ACPI init
[    0.449981] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.451248] pnp: PnP ACPI: found 6 devices
[    0.459113] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.460413] NET: Registered PF_INET protocol family
[    0.461144] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.462707] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.463896] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.464974] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.466062] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.467071] TCP: Hash tables configured (established 4096 bind 4096)
[    0.468009] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.468951] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.469991] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.471183] RPC: Registered named UNIX socket transport module.
[    0.473278] RPC: Registered udp transport module.
[    0.473941] RPC: Registered tcp transport module.
[    0.474599] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.475526] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.476399] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.477249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.478210] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.479183] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.480155] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.481499] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.483009] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.484441] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.485815] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.489253] PCI: CLS 0 bytes, default 64
[    0.490056] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.491246] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.493958] Initialise system trusted keyrings
[    0.494814] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.497187] NFS: Registering the id_resolver key type
[    0.497944] Key type id_resolver registered
[    0.498575] Key type id_legacy registered
[    0.499756] Key type cifs.idmap registered
[    0.509839] xor: automatically using best checksumming function   avx       
[    0.510916] Key type asymmetric registered
[    0.511545] Asymmetric key parser 'x509' registered
[    0.512284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.513341] io scheduler mq-deadline registered
[    0.513977] io scheduler kyber registered
[    0.515147] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.519373] ACPI: button: Power Button [PWRF]
[    0.520689] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.522708] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.524551] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.526414] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.528186] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.529258] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.530526] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.531742] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.535327] Linux agpgart interface v0.103
[    0.536128] ACPI: bus type drm_connector registered
[    0.536964] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.537781] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.546926] Console: switching to colour dummy device 80x25
[    0.547931] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.547933] [drm] features: -context_init
[    0.550103] [drm] number of scanouts: 1
[    0.550683] [drm] number of cap sets: 0
[    0.551629] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.555440] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.582793] Console: switching to colour frame buffer device 160x50
[    0.609309] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.613782] brd: module loaded
[    0.616079] loop: module loaded
[    0.616933] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.619931] virtio_blk virtio3: [vda] 911270 512-byte logical blocks (467 MB/445 MiB)
[    0.624481] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.626204] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.629027] scsi host0: ahci
[    0.630020] scsi host1: ahci
[    0.630991] scsi host2: ahci
[    0.631917] scsi host3: ahci
[    0.632866] scsi host4: ahci
[    0.633806] scsi host5: ahci
[    0.634434] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.635789] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.637187] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.638474] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.639745] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.641023] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.643993] e100: Intel(R) PRO/100 Network Driver
[    0.644904] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.645860] e1000: Intel(R) PRO/1000 Network Driver
[    0.646699] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.647707] e1000e: Intel(R) PRO/1000 Network Driver
[    0.648562] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.649605] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.650493] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.651450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.652537] ehci-pci: EHCI PCI platform driver
[    0.653981] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.654751] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.655956] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.663495] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.664813] hub 1-0:1.0: USB hub found
[    0.665388] hub 1-0:1.0: 6 ports detected
[    0.666146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.667107] ohci-pci: OHCI PCI platform driver
[    0.667819] uhci_hcd: USB Universal Host Controller Interface driver
[    0.669655] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.670545] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.671931] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.673162] hub 2-0:1.0: USB hub found
[    0.673752] hub 2-0:1.0: 2 ports detected
[    0.675206] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.676005] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.677185] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.678355] hub 3-0:1.0: USB hub found
[    0.678902] hub 3-0:1.0: 2 ports detected
[    0.680199] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.680992] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.682141] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.683282] hub 4-0:1.0: USB hub found
[    0.683867] hub 4-0:1.0: 2 ports detected
[    0.684908] usbcore: registered new interface driver usb-storage
[    0.685825] usbcore: registered new interface driver usbserial_generic
[    0.686874] usbserial: USB Serial support registered for generic
[    0.687854] usbcore: registered new interface driver ftdi_sio
[    0.688697] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.689742] usbcore: registered new interface driver pl2303
[    0.690523] usbserial: USB Serial support registered for pl2303
[    0.691374] i8042: PNP: No PS/2 controller found.
[    0.692146] mousedev: PS/2 mouse device common for all mice
[    0.693138] rtc_cmos 00:04: RTC can wake from S4
[    0.694348] rtc_cmos 00:04: registered as rtc0
[    0.695047] rtc_cmos 00:04: setting system clock to 2023-03-08T21:46:10 UTC (1678311970)
[    0.696213] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.697673] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.698587] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.699382] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.700907] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.702304] intel_pstate: CPU model not supported
[    0.703009] sdhci: Secure Digital Host Controller Interface driver
[    0.703872] sdhci: Copyright(c) Pierre Ossman
[    0.704516] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.705817] usbcore: registered new interface driver usbhid
[    0.706623] usbhid: USB HID core driver
[    0.707229] u32 classifier
[    0.707617]     input device check on
[    0.708123]     Actions configured
[    0.708754] NET: Registered PF_INET6 protocol family
[    0.710051] Segment Routing with IPv6
[    0.710625] In-situ OAM (IOAM) with IPv6
[    0.711211] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.712189] NET: Registered PF_PACKET protocol family
[    0.712964] Bridge firewalling registered
[    0.713571] Key type dns_resolver registered
[    0.714262] NET: Registered PF_VSOCK protocol family
[    0.715502] IPI shorthand broadcast: enabled
[    0.716160] sched_clock: Marking stable (601440325, 114015341)->(809767616, -94311950)
[    0.722656] Loading compiled-in X.509 certificates
[    0.724458] Key type ._fscrypt registered
[    0.725040] Key type .fscrypt registered
[    0.725711] Key type fscrypt-provisioning registered
[    0.726683] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.729363] Key type encrypted registered
[    0.732302] printk: console [netcon0] enabled
[    0.732942] netconsole: network logging started
[    0.907383] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.952531] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.954238] ata2: SATA link down (SStatus 0 SControl 300)
[    0.955653] ata5: SATA link down (SStatus 0 SControl 300)
[    0.957139] ata1: SATA link down (SStatus 0 SControl 300)
[    0.959482] ata6: SATA link down (SStatus 0 SControl 300)
[    0.961646] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.962982] ata3.00: applying bridge limits
[    0.964243] ata4: SATA link down (SStatus 0 SControl 300)
[    0.965561] ata3.00: configured for UDMA/100
[    0.969690] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.017799] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.019299] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.048922] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.053339] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.055355] IP-Config: Complete:
[    1.058632]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.060760]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.062131]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.062134]      nameserver0=8.8.8.8
[    1.065142] md: Waiting for all devices to be available before autodetect
[    1.066256] md: If you don't use raid, use raid=noautodetect
[    1.067164] md: Autodetecting RAID arrays.
[    1.067834] md: autorun ...
[    1.068279] md: ... autorun DONE.
[    1.071548] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.072941] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.074172] devtmpfs: mounted
[    1.077064] Freeing unused kernel image (initmem) memory: 1936K
[    1.078191] Write protecting the kernel read-only data: 22528k
[    1.081074] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.082494] Freeing unused kernel image (rodata/data gap) memory: 364K
[    1.083792] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.201385] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.212514] udevd[173]: starting version 3.2.11
[    1.227463] udevd[174]: starting eudev-3.2.11
[    1.336537] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.389628] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.462909] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.649394] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  8 21:46:11 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCSF2vNNNssl9qWE8EGrLUz0L1MI/G6sky0/DOXMJjuVWtkks0rdCAvRhypX5hKelAHjt4rrSOgkgioDaYJwmOWfF5k9bbp+qGYZHkoFZfRSZA8TkSsC5aZs6MgnCUp8ADkTdQj06SXu6WkjDjdjNrPpPuBlbYt7FlUftJM01d302p8P/dlqlJ+Z0UICSdkc2JzgYe0WpSE091EpzPEXShgxbB2nlRl2sS2WBrKX2LrQauYBfx25Z85Mja7KrnhybqnQiSxNJ6+agt9pZclXUEv9LKlEjCmh2Fsdolh+DSiL+Tt1SXBGsh0AIlt/20IpNp+Kt/MXSQFwtveZdAKu945 root@qemux86-64
Fingerprint: SHA256:jyXmATyTo1Oeq6ynODdHVNxF3NL8RlrETGLT/INfKTI
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.211769] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.212930] Bluetooth: BNEP filters: protocol multicast
[    2.214076] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-0luFN3itb4,guid=502295b17fe178f0496ad4ea64090223
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu

Poky (Yocto Project Reference Distro) 4.1.3 qemux86-64 /dev/ttyS0

qemux86-64 login: libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[663]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=661 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[663]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(connman-applet:630): Gdk-[1;35mCRITICAL[0m **: [34m21:46:11.467[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
