[ 0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 476277966 cycles [ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000008] tsc: Detected 2299.996 MHz processor [ 0.001222] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001264] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.011659] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.011803] ACPI: Early table checksum verification disabled [ 0.011817] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS ) [ 0.011824] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011837] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011843] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011848] ACPI: FACS 0x000000001FFE0000 000040 [ 0.011852] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011856] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011860] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011865] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.011868] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6] [ 0.011870] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2] [ 0.011871] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.011871] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366] [ 0.011872] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e] [ 0.011873] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da] [ 0.011874] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402] [ 0.011924] Zone ranges: [ 0.011925] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011927] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.011929] Normal empty [ 0.011930] Movable zone start for each node [ 0.011931] Early memory node ranges [ 0.011931] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.011933] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.011934] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.012426] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.012444] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.014437] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.015041] ACPI: PM-Timer IO Port: 0x608 [ 0.015053] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.015095] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.015099] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.015101] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.015102] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.015107] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.015108] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.015113] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.015115] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.015118] TSC deadline timer available [ 0.015119] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.015146] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.015148] Booting paravirtualized kernel on KVM [ 0.015152] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.015156] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.015824] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288 [ 0.015865] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.015867] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.015994] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.016033] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.016702] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.018030] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved) [ 0.018089] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.018097] Kernel/User page tables isolation: enabled [ 0.018111] ftrace: allocating 47075 entries in 184 pages [ 0.029888] ftrace: allocated 184 pages with 4 groups [ 0.029934] Dynamic Preempt: full [ 0.030439] rcu: Preemptible hierarchical RCU implementation. [ 0.030440] rcu: RCU event tracing is enabled. [ 0.030441] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.030442] All grace periods are expedited (rcu_expedited). [ 0.030443] Trampoline variant of Tasks RCU enabled. [ 0.030443] Rude variant of Tasks RCU enabled. [ 0.030444] Tracing variant of Tasks RCU enabled. [ 0.030445] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.030445] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.035539] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.035716] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.035839] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.035854] random: crng init done [ 0.043822] Console: colour VGA+ 80x25 [ 0.160269] printk: console [ttyS0] enabled [ 0.161003] ACPI: Core revision 20220331 [ 0.161848] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.163527] APIC: Switch to symmetric I/O mode setup [ 0.164679] x2apic enabled [ 0.166714] Switched APIC routing to physical x2apic. [ 0.168979] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.170068] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.171895] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996) [ 0.172896] pid_max: default: 32768 minimum: 301 [ 0.173913] LSM: Security Framework initializing [ 0.174903] landlock: Up and running. [ 0.176897] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.177897] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.179197] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.179898] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.180897] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.181897] Spectre V2 : Mitigation: Retpolines [ 0.182896] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.183896] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.184896] Speculative Store Bypass: Vulnerable [ 0.185686] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.185896] MMIO Stale Data: Unknown: No mitigations [ 0.186896] SRBDS: Unknown: Dependent on hypervisor status [ 0.206002] Freeing SMP alternatives memory: 52K [ 0.206894] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.207021] cblist_init_generic: Setting adjustable number of callback queues. [ 0.207897] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.208917] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.209925] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.210914] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.211938] rcu: Hierarchical SRCU implementation. [ 0.212898] rcu: Max phase no-delay instances is 400. [ 0.214053] smp: Bringing up secondary CPUs ... [ 0.214967] x86: Booting SMP configuration: [ 0.215692] .... node #0, CPUs: #1 #2 #3 [ 0.217302] smp: Brought up 1 node, 4 CPUs [ 0.218610] smpboot: Max logical packages: 1 [ 0.218897] smpboot: Total of 4 processors activated (18399.96 BogoMIPS) [ 0.220252] devtmpfs: initialized [ 0.221039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.221902] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.222929] pinctrl core: initialized pinctrl subsystem [ 0.224627] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.225023] thermal_sys: Registered thermal governor 'step_wise' [ 0.225024] thermal_sys: Registered thermal governor 'user_space' [ 0.225966] cpuidle: using governor menu [ 0.230210] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.233908] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.235926] PCI: Using configuration type 1 for base access [ 0.241931] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.259897] raid6: sse2x4 gen() 13176 MB/s [ 0.276897] raid6: sse2x2 gen() 13475 MB/s [ 0.293897] raid6: sse2x1 gen() 10086 MB/s [ 0.294656] raid6: using algorithm sse2x2 gen() 13475 MB/s [ 0.311897] raid6: .... xor() 8344 MB/s, rmw enabled [ 0.312764] raid6: using ssse3x2 recovery algorithm [ 0.312939] ACPI: Added _OSI(Module Device) [ 0.313653] ACPI: Added _OSI(Processor Device) [ 0.313898] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.314719] ACPI: Added _OSI(Processor Aggregator Device) [ 0.314898] ACPI: Added _OSI(Linux-Dell-Video) [ 0.315663] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.315898] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.317745] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.319077] ACPI: Interpreter enabled [ 0.319736] ACPI: PM: (supports S0 S3 S5) [ 0.319898] ACPI: Using IOAPIC for interrupt routing [ 0.320783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.320898] PCI: Using E820 reservations for host bridge windows [ 0.321995] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.324807] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.324903] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.325943] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.326961] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.327938] PCI host bridge to bus 0000:00 [ 0.328667] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.328899] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.329898] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.330898] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.331898] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.332898] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.333898] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.334924] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.336577] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.337899] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.339709] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.342898] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.344898] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.346698] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.347631] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.350627] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.353123] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.355365] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.357937] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.359925] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff] [ 0.363364] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.363993] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.365908] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.367899] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.369406] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.372435] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.374786] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.377541] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.379086] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.381682] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.382739] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.384575] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.385769] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.386299] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.388879] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.389465] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.390186] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.393477] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.394462] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.395977] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.401081] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.403030] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.403987] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.404984] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.405980] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.406980] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.407981] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.408981] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.409980] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.410934] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.411908] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.412883] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.412906] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.413879] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.413909] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.414907] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.415946] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.417317] SCSI subsystem initialized [ 0.417983] ACPI: bus type USB registered [ 0.418645] usbcore: registered new interface driver usbfs [ 0.418914] usbcore: registered new interface driver hub [ 0.419790] usbcore: registered new device driver usb [ 0.419916] pps_core: LinuxPPS API ver. 1 registered [ 0.420731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.420901] PTP clock support registered [ 0.421936] Bluetooth: Core ver 2.22 [ 0.422561] NET: Registered PF_BLUETOOTH protocol family [ 0.422898] Bluetooth: HCI device and connection manager initialized [ 0.423903] Bluetooth: HCI socket layer initialized [ 0.424734] Bluetooth: L2CAP socket layer initialized [ 0.424905] Bluetooth: SCO socket layer initialized [ 0.425745] PCI: Using ACPI for IRQ routing [ 0.501461] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.501894] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.501894] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.501901] vgaarb: loaded [ 0.502418] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.502898] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.508957] clocksource: Switched to clocksource kvm-clock [ 0.509979] pnp: PnP ACPI init [ 0.510680] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.512131] pnp: PnP ACPI: found 6 devices [ 0.520392] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.521906] NET: Registered PF_INET protocol family [ 0.522758] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.524292] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.525687] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.526937] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.528210] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.529379] TCP: Hash tables configured (established 4096 bind 4096) [ 0.530436] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.531507] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.532674] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.533979] RPC: Registered named UNIX socket transport module. [ 0.534977] RPC: Registered udp transport module. [ 0.535735] RPC: Registered tcp transport module. [ 0.536499] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.537562] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.538564] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.540773] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.541899] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.543020] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.544153] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.545644] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.547310] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.548895] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.550484] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.552057] PCI: CLS 0 bytes, default 64 [ 0.552915] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.554350] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.557005] Initialise system trusted keyrings [ 0.557860] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.560496] NFS: Registering the id_resolver key type [ 0.561379] Key type id_resolver registered [ 0.562076] Key type id_legacy registered [ 0.563221] Key type cifs.idmap registered [ 0.575146] xor: automatically using best checksumming function avx [ 0.576313] Key type asymmetric registered [ 0.576996] Asymmetric key parser 'x509' registered [ 0.577809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.578987] io scheduler mq-deadline registered [ 0.579729] io scheduler kyber registered [ 0.580753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.582977] ACPI: button: Power Button [PWRF] [ 0.585688] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.590422] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.595020] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.599630] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.613604] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.616216] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.619244] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.622267] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.626397] Linux agpgart interface v0.103 [ 0.628107] ACPI: bus type drm_connector registered [ 0.630159] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.632142] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.659586] Console: switching to colour dummy device 80x25 [ 0.661829] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.661833] [drm] features: -context_init [ 0.666385] [drm] number of scanouts: 1 [ 0.667533] [drm] number of cap sets: 0 [ 0.669146] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.676029] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.697352] Console: switching to colour frame buffer device 160x50 [ 0.729249] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.735610] brd: module loaded [ 0.744079] loop: module loaded [ 0.745664] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.751071] virtio_blk virtio3: [vda] 1066336 512-byte logical blocks (546 MB/521 MiB) [ 0.758816] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.761781] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.765693] scsi host0: ahci [ 0.767039] scsi host1: ahci [ 0.768397] scsi host2: ahci [ 0.769664] scsi host3: ahci [ 0.770938] scsi host4: ahci [ 0.772201] scsi host5: ahci [ 0.773334] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32 [ 0.775775] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32 [ 0.778217] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32 [ 0.780650] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32 [ 0.782886] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32 [ 0.785085] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32 [ 0.789866] e100: Intel(R) PRO/100 Network Driver [ 0.791158] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.792642] e1000: Intel(R) PRO/1000 Network Driver [ 0.793943] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.795477] e1000e: Intel(R) PRO/1000 Network Driver [ 0.796804] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.798442] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.799879] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.801364] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.803079] ehci-pci: EHCI PCI platform driver [ 0.805278] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.806698] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.809024] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000 [ 0.816953] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.818578] hub 1-0:1.0: USB hub found [ 0.819508] hub 1-0:1.0: 6 ports detected [ 0.820795] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.822363] ohci-pci: OHCI PCI platform driver [ 0.823496] uhci_hcd: USB Universal Host Controller Interface driver [ 0.825949] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.827290] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.829386] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.831156] hub 2-0:1.0: USB hub found [ 0.832171] hub 2-0:1.0: 2 ports detected [ 0.834244] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.835763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.837826] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.839484] hub 3-0:1.0: USB hub found [ 0.840451] hub 3-0:1.0: 2 ports detected [ 0.842454] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.843739] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.845809] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.847382] hub 4-0:1.0: USB hub found [ 0.848298] hub 4-0:1.0: 2 ports detected [ 0.849420] usbcore: registered new interface driver usb-storage [ 0.850817] usbcore: registered new interface driver usbserial_generic [ 0.852468] usbserial: USB Serial support registered for generic [ 0.853790] usbcore: registered new interface driver ftdi_sio [ 0.855035] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.856601] usbcore: registered new interface driver pl2303 [ 0.869072] usbserial: USB Serial support registered for pl2303 [ 0.870285] i8042: PNP: No PS/2 controller found. [ 0.871416] mousedev: PS/2 mouse device common for all mice [ 0.872823] rtc_cmos 00:04: RTC can wake from S4 [ 0.874482] rtc_cmos 00:04: registered as rtc0 [ 0.875510] rtc_cmos 00:04: setting system clock to 2023-03-09T17:13:28 UTC (1678382008) [ 0.877233] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.879268] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.880600] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.881809] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.883701] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.885644] intel_pstate: CPU model not supported [ 0.886853] sdhci: Secure Digital Host Controller Interface driver [ 0.888167] sdhci: Copyright(c) Pierre Ossman [ 0.889130] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.890519] usbcore: registered new interface driver usbhid [ 0.891651] usbhid: USB HID core driver [ 0.892471] u32 classifier [ 0.893045] input device check on [ 0.893777] Actions configured [ 0.894649] NET: Registered PF_INET6 protocol family [ 0.896700] Segment Routing with IPv6 [ 0.897460] In-situ OAM (IOAM) with IPv6 [ 0.898253] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.899571] NET: Registered PF_PACKET protocol family [ 0.900570] Bridge firewalling registered [ 0.901424] Key type dns_resolver registered [ 0.902342] NET: Registered PF_VSOCK protocol family [ 0.903803] IPI shorthand broadcast: enabled [ 0.904660] sched_clock: Marking stable (773446667, 131172658)->(996125591, -91506266) [ 0.906309] Loading compiled-in X.509 certificates [ 0.907369] Key type ._fscrypt registered [ 0.908137] Key type .fscrypt registered [ 0.908837] Key type fscrypt-provisioning registered [ 0.909907] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 0.911779] Key type encrypted registered [ 0.914437] printk: console [netcon0] enabled [ 0.915173] netconsole: network logging started [ 1.055929] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.092056] ata2: SATA link down (SStatus 0 SControl 300) [ 1.094395] ata1: SATA link down (SStatus 0 SControl 300) [ 1.101863] ata4: SATA link down (SStatus 0 SControl 300) [ 1.104146] ata5: SATA link down (SStatus 0 SControl 300) [ 1.106487] ata6: SATA link down (SStatus 0 SControl 300) [ 1.108815] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.111216] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.113240] ata3.00: applying bridge limits [ 1.114974] ata3.00: configured for UDMA/100 [ 1.117108] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.163335] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.165755] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.198001] IP-Config: Complete: [ 1.199515] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.203227] host=192.168.7.2, domain=, nis-domain=(none) [ 1.203599] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.205286] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.205291] nameserver0=8.8.8.8 [ 1.213581] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.217938] md: Waiting for all devices to be available before autodetect [ 1.219742] md: If you don't use raid, use raid=noautodetect [ 1.221206] md: Autodetecting RAID arrays. [ 1.222237] md: autorun ... [ 1.222960] md: ... autorun DONE. [ 1.225858] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.228012] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.229787] devtmpfs: mounted [ 1.233821] Freeing unused kernel image (initmem) memory: 1936K [ 1.235388] Write protecting the kernel read-only data: 22528k [ 1.239675] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.241593] Freeing unused kernel image (rodata/data gap) memory: 364K [ 1.243277] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.352933] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 1.386260] udevd[173]: starting version 3.2.11 [ 1.397724] udevd[174]: starting eudev-3.2.11 [ 1.491858] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 1.547055] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.615951] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 1.797943] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 9 17:13:29 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" D-BUS per-session daemon address is: unix:path=/tmp/dbus-e3ima3OFfa,guid=b975ea07bac1170df62dd783640a13b9 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu libGL error: glx: failed to create dri3 screen libGL error: failed to load driver: virtio_gpu Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC9mnK3+4ZHaAp80CJeVvubpd3JoIi4bLvJWq3A6IEznnHLUrw1su3YoxfkPmGKjlNSNq9tHJ6+fV4k8O4k2Jg9FUfuSdeQN6Im1ZH9sN/AzPcFCAh9gI/4KfAbeRBgsx+83xEhOno3oRTKkU2DFfaI0M+JPX3TcnUAZ8MtX/be0eoGSDRSnAnLXGTc9xLMU2agtZeb5qaII3kwKCKe3C71LGgI0NLT+kkZXD4sFcRTis2QrlDWGsohJTEzPhjzmwzIASFbvKSnjEOaBHGJY5CbBEveW8T4qwn4LIcvbSf2qSQusDQQY87hbg3WTNxb3kEoaP/eGKT81TJcioKCkUz/ root@qemux86-64 Fingerprint: SHA256:MUPF33fWCotGSejitErm/u4XgtdcU3NUyFGD2ABDWYo matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dropbear. libGL error: glx: failed to create dri2 screen libGL error: failed to load driver: virtio_gpu [settings daemon] Forking. run with -n to prevent fork Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. [ 2.740772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.741554] Bluetooth: BNEP filters: protocol multicast [ 2.742603] Bluetooth: BNEP socket layer initialized Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon dbus-daemon[597]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=622 comm="matchbox-panel --start-applets showdesktop,windows") matchbox-wm: X error warning (0xa00003): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[597]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Poky (Yocto Project Reference Distro) 4.1.3 qemux86-64 /dev/ttyS0 qemux86-64 login: