[ 0.000000] Linux version 5.15.96-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 27 14:53:27 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12658K kernel code, 1898K rwdata, 2864K rodata, 412K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467347505 ns [ 0.000118] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884660221ns [ 0.008406] Console: colour dummy device 80x25 [ 0.011828] printk: console [tty0] enabled [ 0.012613] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.15.96-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Feb 27 14:53:27 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12658K kernel code, 1898K rwdata, 2864K rodata, 412K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467347505 ns [ 0.000118] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884660221ns [ 0.008406] Console: colour dummy device 80x25 [ 0.011828] printk: console [tty0] enabled [ 0.012613] printk: bootconsole [uart8250] disabled [ 0.014568] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.119387] pid_max: default: 32768 minimum: 301 [ 0.120383] LSM: Security Framework initializing [ 0.121563] landlock: Up and running. [ 0.123930] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.124087] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.162740] Performance counters: Either hardware does not support performance counters, or not yet implemented. [ 0.163900] rcu: Hierarchical SRCU implementation. [ 0.171748] smp: Bringing up secondary CPUs ... [ 0.171892] smp: Brought up 1 node, 1 CPU [ 0.184963] devtmpfs: initialized [ 0.192715] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.192948] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.202903] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.500281] raid6: int64x8 gen() 241 MB/s [ 0.676146] raid6: int64x8 xor() 210 MB/s [ 0.849437] raid6: int64x4 gen() 605 MB/s [ 1.027183] raid6: int64x4 xor() 328 MB/s [ 1.204221] raid6: int64x2 gen() 1044 MB/s [ 1.375741] raid6: int64x2 xor() 408 MB/s [ 1.552853] raid6: int64x1 gen() 648 MB/s [ 1.731500] raid6: int64x1 xor() 386 MB/s [ 1.731746] raid6: using algorithm int64x2 gen() 1044 MB/s [ 1.731875] raid6: .... xor() 408 MB/s, rmw enabled [ 1.732120] raid6: using intx1 recovery algorithm [ 1.743355] vgaarb: loaded [ 1.746436] SCSI subsystem initialized [ 1.747809] usbcore: registered new interface driver usbfs [ 1.748536] usbcore: registered new interface driver hub [ 1.749043] usbcore: registered new device driver usb [ 1.749856] pps_core: LinuxPPS API ver. 1 registered [ 1.749973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.750272] PTP clock support registered [ 1.774542] PCI host bridge to bus 0000:00 [ 1.775239] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.776349] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.776714] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.779997] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.781425] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.781644] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.781779] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.781907] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.782058] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.786676] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.788129] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.788627] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.788875] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.789023] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.789186] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.789303] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.790084] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.790317] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.791504] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.792435] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.792934] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.794030] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.794200] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.794451] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.794588] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.795442] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.796152] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.796321] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.796593] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.796869] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.797602] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.797753] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.797897] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.798623] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.798770] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.798915] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.800206] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.803186] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.803893] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.804152] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.804506] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.804799] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.804985] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.805192] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.805391] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.805546] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.805659] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.805773] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.805879] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.810486] clocksource: Switched to clocksource MIPS [ 2.052767] NET: Registered PF_INET protocol family [ 2.055188] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.100899] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 2.101243] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.101613] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.102095] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.102596] TCP: Hash tables configured (established 8192 bind 8192) [ 2.104964] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.105588] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.108945] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.125277] RPC: Registered named UNIX socket transport module. [ 2.125548] RPC: Registered udp transport module. [ 2.125647] RPC: Registered tcp transport module. [ 2.125733] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.127715] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.129133] PCI: CLS 0 bytes, default 32 [ 2.846313] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 2.876795] NFS: Registering the id_resolver key type [ 2.879330] Key type id_resolver registered [ 2.879559] Key type id_legacy registered [ 2.885320] Key type cifs.idmap registered [ 2.944188] xor: measuring software checksum speed [ 2.950687] 8regs : 1723 MB/sec [ 2.956772] 8regs_prefetch : 1691 MB/sec [ 2.963161] 32regs : 1735 MB/sec [ 2.969536] 32regs_prefetch : 1605 MB/sec [ 2.969894] xor: using function: 32regs (1735 MB/sec) [ 2.970433] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.970673] io scheduler mq-deadline registered [ 2.970804] io scheduler kyber registered [ 2.976109] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.979182] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.980612] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.982856] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.989125] printk: console [ttyS0] disabled [ 3.013422] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.013597] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.047324] printk: console [ttyS0] enabled [ 3.072499] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.080257] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.081303] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.102117] random: crng init done [ 3.108429] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.115257] [drm] Found bochs VGA, ID 0xb0c5. [ 3.115654] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.122548] [drm] Found EDID data blob. [ 3.133539] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.265588] Console: switching to colour frame buffer device 128x48 [ 3.299065] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 3.364143] brd: module loaded [ 3.375712] virtio_blk virtio2: [vda] 4748748 512-byte logical blocks (2.43 GB/2.26 GiB) [ 3.418323] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.419504] ehci-pci: EHCI PCI platform driver [ 3.421044] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.422199] ohci-pci: OHCI PCI platform driver [ 3.430117] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.432424] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.441832] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 3.448308] usbcore: registered new interface driver usbhid [ 3.449237] usbhid: USB HID core driver [ 3.451434] u32 classifier [ 3.452009] input device check on [ 3.452592] Actions configured [ 3.456284] NET: Registered PF_INET6 protocol family [ 3.471312] Segment Routing with IPv6 [ 3.478733] In-situ OAM (IOAM) with IPv6 [ 3.480773] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.492770] NET: Registered PF_PACKET protocol family [ 3.499681] Bridge firewalling registered [ 3.504940] Key type dns_resolver registered [ 3.506929] NET: Registered PF_VSOCK protocol family [ 3.529091] Key type .fscrypt registered [ 3.555511] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.579274] Key type fscrypt-provisioning registered [ 3.617134] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 3.670681] Key type encrypted registered [ 3.695854] printk: console [netcon0] enabled [ 3.720506] netconsole: network logging started [ 4.266852] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 4.360704] IP-Config: Complete: [ 4.375709] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.391899] host=192.168.7.4, domain=, nis-domain=(none) [ 4.409152] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.409269] nameserver0=8.8.8.8 [ 4.433717] md: Waiting for all devices to be available before autodetect [ 4.451469] md: If you don't use raid, use raid=noautodetect [ 4.465703] md: Autodetecting RAID arrays. [ 4.486211] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 4.499875] md: autorun ... [ 4.533893] md: ... autorun DONE. [ 4.591616] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 4.599889] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.612302] devtmpfs: mounted [ 4.653406] Freeing unused kernel image (initmem) memory: 412K [ 4.659811] This architecture does not have kernel memory protection. [ 4.667459] Run /sbin/init as init process [ 4.731810] process '/sbin/init.sysvinit' started with executable stack [ 8.361358] udevd[118]: starting version 3.2.10 [ 8.466313] udevd[119]: starting eudev-3.2.10 [ 19.294354] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. ALSA: Restoring mixer settings... INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon...done. X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips64 5.15.96-yocto-standard #1 SMP PREEMPT Mon Feb 27 14:53:27 UTC 2023 mips64 Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 13 23:36:59 2023 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting bluetooth: bluetoothd. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86EmojiPicker Errors from xkbcomp are not fatal to the X server [A[122G[ ok ] D-BUS per-session daemon address is: unix:path=/tmp/dbus-WI3S5BEiIP,guid=cd86d6c1ec80b9ef3abaa876640fb39f Starting Telephony daemon Using calibration data stored in /etc/pointercal.xinput No makedumpfile found. Starting crond: OK Using calibration data stored in /etc/pointercal.xinput Poky (Yocto Project Reference Distro) 4.0.8 qemumips64 ttyS0 qemumips64 login: [ 2026.969142] hellomod: loading out-of-tree module taints kernel. [ 2026.986897] Hello world! [ 2030.561199] Cleaning up hellomod.