[ 0.000000] Linux version 6.1.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT_DYNAMIC Mon Feb 27 14:44:30 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] random: crng init done [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000b060df] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060e0-0x0000000000b060ef] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060f0-0x000000007ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000003] kvm-clock: using sched offset of 1848157339 cycles [ 0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000015] tsc: Detected 2599.996 MHz processor [ 0.001613] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.001671] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001689] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.013173] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.015986] ACPI: Early table checksum verification disabled [ 0.016035] ACPI: RSDP 0x00000000000F59D0 000014 (v00 BOCHS ) [ 0.016050] ACPI: RSDT 0x000000007FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016070] ACPI: FACP 0x000000007FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016080] ACPI: DSDT 0x000000007FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016086] ACPI: FACS 0x000000007FFE0000 000040 [ 0.016092] ACPI: APIC 0x000000007FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016098] ACPI: HPET 0x000000007FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016104] ACPI: MCFG 0x000000007FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016109] ACPI: WAET 0x000000007FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.016114] ACPI: Reserving FACP table memory at [mem 0x7ffe21ec-0x7ffe22df] [ 0.016117] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe21eb] [ 0.016118] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.016120] ACPI: Reserving APIC table memory at [mem 0x7ffe22e0-0x7ffe236f] [ 0.016121] ACPI: Reserving HPET table memory at [mem 0x7ffe2370-0x7ffe23a7] [ 0.016123] ACPI: Reserving MCFG table memory at [mem 0x7ffe23a8-0x7ffe23e3] [ 0.016124] ACPI: Reserving WAET table memory at [mem 0x7ffe23e4-0x7ffe240b] [ 0.019795] Zone ranges: [ 0.019798] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019802] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019805] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.019808] Movable zone start for each node [ 0.019809] Early memory node ranges [ 0.019809] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.019815] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.019817] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.019822] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.021958] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.021990] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.129637] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.130521] ACPI: PM-Timer IO Port: 0x608 [ 0.130545] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.130606] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.130613] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.130616] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.130618] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.130624] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.130626] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.130636] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.130638] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.130653] TSC deadline timer available [ 0.130656] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.130731] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.130733] Booting paravirtualized kernel on KVM [ 0.130749] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.130764] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.134663] percpu: Embedded 54 pages/cpu s180648 r8192 d32344 u524288 [ 0.134749] Built 1 zonelists, mobility grouping on. Total pages: 1031895 [ 0.134753] Kernel command line: root=/dev/vda rw ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.140063] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.142716] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.145663] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.145693] software IO TLB: area num 4. [ 0.397205] Memory: 4023164K/4193752K available (16395K kernel code, 2281K rwdata, 3796K rodata, 1948K init, 1744K bss, 170328K reserved, 0K cma-reserved) [ 0.397323] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.397352] Kernel/User page tables isolation: enabled [ 0.397388] ftrace: allocating 48067 entries in 188 pages [ 0.413677] ftrace: allocated 188 pages with 5 groups [ 0.413821] Dynamic Preempt: full [ 0.429836] rcu: Preemptible hierarchical RCU implementation. [ 0.429839] rcu: RCU event tracing is enabled. [ 0.429840] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.429844] All grace periods are expedited (rcu_expedited). [ 0.429845] Trampoline variant of Tasks RCU enabled. [ 0.429846] Rude variant of Tasks RCU enabled. [ 0.429846] Tracing variant of Tasks RCU enabled. [ 0.429848] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.429849] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.436904] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.437126] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.437293] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.448834] Console: colour VGA+ 80x25 [ 0.651617] printk: console [ttyS0] enabled [ 0.652442] ACPI: Core revision 20220331 [ 0.653677] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.657830] APIC: Switch to symmetric I/O mode setup [ 0.659299] x2apic enabled [ 0.660266] Switched APIC routing to physical x2apic. [ 0.662930] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.664470] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.666959] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.667966] pid_max: default: 32768 minimum: 301 [ 0.669967] LSM: Security Framework initializing [ 0.670987] landlock: Up and running. [ 0.673011] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.674041] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.675880] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.675990] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.676973] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.677969] Spectre V2 : Mitigation: Retpolines [ 0.678960] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.679957] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.679957] Speculative Store Bypass: Vulnerable [ 0.679957] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.679965] MMIO Stale Data: Unknown: No mitigations [ 0.680963] SRBDS: Unknown: Dependent on hypervisor status [ 0.711585] Freeing SMP alternatives memory: 52K [ 0.711957] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.712611] cblist_init_generic: Setting adjustable number of callback queues. [ 0.712965] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.714065] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.715084] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.716040] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.717120] rcu: Hierarchical SRCU implementation. [ 0.717964] rcu: Max phase no-delay instances is 400. [ 0.719661] smp: Bringing up secondary CPUs ... [ 0.720450] x86: Booting SMP configuration: [ 0.720963] .... node #0, CPUs: #1 #2 #3 [ 0.722683] smp: Brought up 1 node, 4 CPUs [ 0.723825] smpboot: Max logical packages: 1 [ 0.723966] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.731646] devtmpfs: initialized [ 0.736194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.736981] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.738067] pinctrl core: initialized pinctrl subsystem [ 0.742236] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.743522] thermal_sys: Registered thermal governor 'step_wise' [ 0.743528] thermal_sys: Registered thermal governor 'user_space' [ 0.747976] cpuidle: using governor menu [ 0.750136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.751981] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.754005] PCI: Using configuration type 1 for base access [ 0.757223] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.778964] raid6: sse2x4 gen() 7319 MB/s [ 0.796962] raid6: sse2x2 gen() 11443 MB/s [ 0.813973] raid6: sse2x1 gen() 6186 MB/s [ 0.814967] raid6: using algorithm sse2x2 gen() 11443 MB/s [ 0.832960] raid6: .... xor() 6457 MB/s, rmw enabled [ 0.833807] raid6: using ssse3x2 recovery algorithm [ 0.834170] ACPI: Added _OSI(Module Device) [ 0.834969] ACPI: Added _OSI(Processor Device) [ 0.835964] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.836963] ACPI: Added _OSI(Processor Aggregator Device) [ 0.839716] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.841272] ACPI: Interpreter enabled [ 0.841994] ACPI: PM: (supports S0 S3 S5) [ 0.842880] ACPI: Using IOAPIC for interrupt routing [ 0.843026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.843969] PCI: Using E820 reservations for host bridge windows [ 0.845143] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.850018] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.850983] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.852071] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.853073] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.854133] PCI host bridge to bus 0000:00 [ 0.854966] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.855966] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.856966] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.857966] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.858967] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.859965] pci_bus 0000:00: root bus resource [mem 0x180000000-0x97fffffff window] [ 0.860967] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.862069] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.863846] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.865966] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.868966] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.873968] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.876972] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.879027] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.881967] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.884865] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.890761] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.892905] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.895015] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.899995] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.902846] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.905997] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.907135] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.909975] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.912885] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.914967] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.921969] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.926373] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.929906] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.931319] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.934552] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.936305] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.941819] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.943289] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.944632] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.949083] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.950582] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.952276] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.957969] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.959965] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.962508] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.966767] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.968883] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.969131] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.970084] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.971094] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.972130] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.973126] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.974090] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.975088] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.976021] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.976990] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.977979] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.978985] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.979989] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.980985] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.981978] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.983007] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.984799] iommu: Default domain type: Translated [ 0.984965] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.986195] SCSI subsystem initialized [ 0.988057] ACPI: bus type USB registered [ 0.989012] usbcore: registered new interface driver usbfs [ 0.989991] usbcore: registered new interface driver hub [ 0.990980] usbcore: registered new device driver usb [ 0.992015] pps_core: LinuxPPS API ver. 1 registered [ 0.992963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.993981] PTP clock support registered [ 0.996062] Bluetooth: Core ver 2.22 [ 0.996980] NET: Registered PF_BLUETOOTH protocol family [ 0.997964] Bluetooth: HCI device and connection manager initialized [ 0.998976] Bluetooth: HCI socket layer initialized [ 0.999968] Bluetooth: L2CAP socket layer initialized [ 1.000983] Bluetooth: SCO socket layer initialized [ 1.002069] PCI: Using ACPI for IRQ routing [ 1.078178] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.078957] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.078957] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.078976] vgaarb: loaded [ 1.079697] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.079965] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.087131] clocksource: Switched to clocksource kvm-clock [ 1.088550] pnp: PnP ACPI init [ 1.089751] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.093063] pnp: PnP ACPI: found 6 devices [ 1.103989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.106024] NET: Registered PF_INET protocol family [ 1.107270] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.110259] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.112212] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.113856] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.142978] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 1.144667] TCP: Hash tables configured (established 32768 bind 32768) [ 1.157428] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.158804] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.160440] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.162867] RPC: Registered named UNIX socket transport module. [ 1.173425] RPC: Registered udp transport module. [ 1.174386] RPC: Registered tcp transport module. [ 1.175338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.176637] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.177538] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.178431] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.179543] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.181304] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.184479] pci_bus 0000:00: resource 9 [mem 0x180000000-0x97fffffff window] [ 1.186648] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.188840] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.191228] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.193209] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.195527] PCI: CLS 0 bytes, default 64 [ 1.196495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.197562] software IO TLB: mapped [mem 0x000000007bfd8000-0x000000007ffd8000] (64MB) [ 1.199755] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 1.201676] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 1.213040] Initialise system trusted keyrings [ 1.214518] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.219685] NFS: Registering the id_resolver key type [ 1.220826] Key type id_resolver registered [ 1.221688] Key type id_legacy registered [ 1.235973] Key type cifs.idmap registered [ 1.247716] xor: automatically using best checksumming function avx [ 1.250662] Key type asymmetric registered [ 1.251562] Asymmetric key parser 'x509' registered [ 1.252648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.254160] io scheduler mq-deadline registered [ 1.255104] io scheduler kyber registered [ 1.258635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.261154] ACPI: button: Power Button [PWRF] [ 1.264549] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.267835] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.271302] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.274785] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.278101] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.281514] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 1.283645] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.285702] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.290708] Linux agpgart interface v0.103 [ 1.292094] ACPI: bus type drm_connector registered [ 1.293639] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.294891] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.308666] Console: switching to colour dummy device 80x25 [ 1.312626] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.312630] [drm] features: -context_init [ 1.316076] [drm] number of scanouts: 1 [ 1.316908] [drm] number of cap sets: 0 [ 1.318230] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 1.343111] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.343802] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.348701] Console: switching to colour frame buffer device 160x50 [ 1.408016] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.415582] brd: module loaded [ 1.448943] loop: module loaded [ 1.449923] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.453291] virtio_blk virtio3: [vda] 1020272 512-byte logical blocks (522 MB/498 MiB) [ 1.468051] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.470035] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.517365] scsi host0: ahci [ 1.518815] scsi host1: ahci [ 1.520042] scsi host2: ahci [ 1.521226] scsi host3: ahci [ 1.522326] scsi host4: ahci [ 1.523415] scsi host5: ahci [ 1.524514] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.526103] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.527850] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.529354] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.530855] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.534034] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.538095] e100: Intel(R) PRO/100 Network Driver [ 1.539528] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.540764] e1000: Intel(R) PRO/1000 Network Driver [ 1.541863] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.543137] e1000e: Intel(R) PRO/1000 Network Driver [ 1.544344] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.545707] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.546913] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.549786] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.551081] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.558369] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.566539] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.568335] hub 1-0:1.0: USB hub found [ 1.569293] hub 1-0:1.0: 6 ports detected [ 1.572191] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.573506] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.575454] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.577274] hub 2-0:1.0: USB hub found [ 1.578256] hub 2-0:1.0: 2 ports detected [ 1.580848] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.582153] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.583580] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.585574] hub 3-0:1.0: USB hub found [ 1.587029] hub 3-0:1.0: 2 ports detected [ 1.589664] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.591089] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.593315] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.594991] hub 4-0:1.0: USB hub found [ 1.595892] hub 4-0:1.0: 2 ports detected [ 1.597059] usbcore: registered new interface driver usb-storage [ 1.598499] usbcore: registered new interface driver usbserial_generic [ 1.600212] usbserial: USB Serial support registered for generic [ 1.601674] usbcore: registered new interface driver ftdi_sio [ 1.602919] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.604497] usbcore: registered new interface driver pl2303 [ 1.605698] usbserial: USB Serial support registered for pl2303 [ 1.607061] i8042: PNP: No PS/2 controller found. [ 1.610032] mousedev: PS/2 mouse device common for all mice [ 1.612092] rtc_cmos 00:04: RTC can wake from S4 [ 1.615441] rtc_cmos 00:04: registered as rtc0 [ 1.616637] rtc_cmos 00:04: setting system clock to 2023-03-16T11:00:01 UTC (1678964401) [ 1.618525] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.620919] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.620987] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.623295] intel_pstate: CPU model not supported [ 1.624827] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.625494] sdhci: Secure Digital Host Controller Interface driver [ 1.626748] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.628142] sdhci: Copyright(c) Pierre Ossman [ 1.631172] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.632699] usbcore: registered new interface driver usbhid [ 1.634001] usbhid: USB HID core driver [ 1.634896] u32 classifier [ 1.635497] input device check on [ 1.636274] Actions configured [ 1.637263] NET: Registered PF_INET6 protocol family [ 1.639711] Segment Routing with IPv6 [ 1.640570] In-situ OAM (IOAM) with IPv6 [ 1.641414] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.643032] NET: Registered PF_PACKET protocol family [ 1.644208] Bridge firewalling registered [ 1.645400] Key type dns_resolver registered [ 1.646948] NET: Registered PF_VSOCK protocol family [ 1.649656] IPI shorthand broadcast: enabled [ 1.650713] sched_clock: Marking stable (1425802269, 224808789)->(1893159532, -242548474) [ 1.653045] registered taskstats version 1 [ 1.654013] Loading compiled-in X.509 certificates [ 1.655506] Key type .fscrypt registered [ 1.656379] Key type fscrypt-provisioning registered [ 1.664079] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.667153] Key type encrypted registered [ 1.670831] printk: console [netcon0] enabled [ 1.671874] netconsole: network logging started [ 1.815003] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.844586] ata2: SATA link down (SStatus 0 SControl 300) [ 1.845970] ata1: SATA link down (SStatus 0 SControl 300) [ 1.851023] ata4: SATA link down (SStatus 0 SControl 300) [ 1.852494] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.854088] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.855352] ata3.00: applying bridge limits [ 1.856510] ata3.00: configured for UDMA/100 [ 1.858051] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.862830] ata5: SATA link down (SStatus 0 SControl 300) [ 1.866748] ata6: SATA link down (SStatus 0 SControl 300) [ 1.894442] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.895977] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.928040] IP-Config: Complete: [ 1.928816] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 1.931313] host=192.168.7.18, domain=, nis-domain=(none) [ 1.932722] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.932727] nameserver0=8.8.8.8 [ 1.935592] md: Waiting for all devices to be available before autodetect [ 1.936417] md: If you don't use raid, use raid=noautodetect [ 1.937032] md: Autodetecting RAID arrays. [ 1.937560] md: autorun ... [ 1.937853] md: ... autorun DONE. [ 1.951824] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.952336] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.952942] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.954781] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.955527] devtmpfs: mounted [ 1.959153] Freeing unused kernel image (initmem) memory: 1948K [ 1.959909] Write protecting the kernel read-only data: 22528k [ 1.962027] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 1.962973] Freeing unused kernel image (rodata/data gap) memory: 300K [ 1.963914] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 2.073011] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.082317] udevd[161]: starting version 3.2.11 [ 2.096888] udevd[162]: starting eudev-3.2.11 [ 2.300811] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.354308] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.421798] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 2.550031] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1+snapshot-ae0ffd54676a0819bedeb9e0042b40b13d2fbdf9 qemux86-64 /dev/ttyS0 qemux86-64 login: