[ 0.000000] Linux version 6.1.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT_DYNAMIC Mon Feb 27 14:44:30 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] random: crng init done [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000b060df] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060e0-0x0000000000b060ef] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060f0-0x000000007ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000003] kvm-clock: using sched offset of 762793834 cycles [ 0.000007] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000015] tsc: Detected 2599.996 MHz processor [ 0.001693] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.001752] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001769] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.010887] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.022092] ACPI: Early table checksum verification disabled [ 0.022133] ACPI: RSDP 0x00000000000F59D0 000014 (v00 BOCHS ) [ 0.022144] ACPI: RSDT 0x000000007FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022158] ACPI: FACP 0x000000007FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022165] ACPI: DSDT 0x000000007FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022169] ACPI: FACS 0x000000007FFE0000 000040 [ 0.022173] ACPI: APIC 0x000000007FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022177] ACPI: HPET 0x000000007FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022181] ACPI: MCFG 0x000000007FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022184] ACPI: WAET 0x000000007FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.022187] ACPI: Reserving FACP table memory at [mem 0x7ffe21ec-0x7ffe22df] [ 0.022190] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe21eb] [ 0.022191] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.022192] ACPI: Reserving APIC table memory at [mem 0x7ffe22e0-0x7ffe236f] [ 0.022193] ACPI: Reserving HPET table memory at [mem 0x7ffe2370-0x7ffe23a7] [ 0.022193] ACPI: Reserving MCFG table memory at [mem 0x7ffe23a8-0x7ffe23e3] [ 0.022194] ACPI: Reserving WAET table memory at [mem 0x7ffe23e4-0x7ffe240b] [ 0.030304] Zone ranges: [ 0.030308] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.030311] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.030313] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.030315] Movable zone start for each node [ 0.030316] Early memory node ranges [ 0.030316] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.030319] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.030321] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.030324] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.032251] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032270] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.441188] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.441683] ACPI: PM-Timer IO Port: 0x608 [ 0.441699] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.441735] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.441739] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.441741] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.441742] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.441746] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.441747] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.441753] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.441754] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.441764] TSC deadline timer available [ 0.441765] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.441816] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.441817] Booting paravirtualized kernel on KVM [ 0.441828] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.441838] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.452536] percpu: Embedded 54 pages/cpu s180648 r8192 d32344 u524288 [ 0.452611] Built 1 zonelists, mobility grouping on. Total pages: 1031895 [ 0.452613] Kernel command line: root=/dev/vda rw ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.510246] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.517475] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.549652] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.549673] software IO TLB: area num 4. [ 0.845970] Memory: 4023168K/4193752K available (16395K kernel code, 2281K rwdata, 3796K rodata, 1948K init, 1744K bss, 170324K reserved, 0K cma-reserved) [ 0.846049] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.846067] Kernel/User page tables isolation: enabled [ 0.846092] ftrace: allocating 48067 entries in 188 pages [ 0.859691] ftrace: allocated 188 pages with 5 groups [ 0.859784] Dynamic Preempt: full [ 0.863508] rcu: Preemptible hierarchical RCU implementation. [ 0.863510] rcu: RCU event tracing is enabled. [ 0.863511] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.863512] All grace periods are expedited (rcu_expedited). [ 0.863513] Trampoline variant of Tasks RCU enabled. [ 0.863514] Rude variant of Tasks RCU enabled. [ 0.863514] Tracing variant of Tasks RCU enabled. [ 0.863515] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.863517] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.868176] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.868363] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.868493] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.879686] Console: colour VGA+ 80x25 [ 1.003561] printk: console [ttyS0] enabled [ 1.004326] ACPI: Core revision 20220331 [ 1.005231] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 1.008104] APIC: Switch to symmetric I/O mode setup [ 1.009313] x2apic enabled [ 1.010222] Switched APIC routing to physical x2apic. [ 1.012591] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.013598] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 1.015312] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 1.016316] pid_max: default: 32768 minimum: 301 [ 1.017340] LSM: Security Framework initializing [ 1.018323] landlock: Up and running. [ 1.019318] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.020319] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.021904] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 1.022339] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 1.023323] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.024324] Spectre V2 : Mitigation: Retpolines [ 1.025314] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.026313] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.027315] Speculative Store Bypass: Vulnerable [ 1.028326] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 1.029314] MMIO Stale Data: Unknown: No mitigations [ 1.030314] SRBDS: Unknown: Dependent on hypervisor status [ 1.057644] Freeing SMP alternatives memory: 52K [ 1.058513] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 1.059527] cblist_init_generic: Setting adjustable number of callback queues. [ 1.060315] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.061250] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.061336] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.062294] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 1.062399] rcu: Hierarchical SRCU implementation. [ 1.063094] rcu: Max phase no-delay instances is 400. [ 1.063613] smp: Bringing up secondary CPUs ... [ 1.064444] x86: Booting SMP configuration: [ 1.065091] .... node #0, CPUs: #1 #2 #3 [ 1.066382] smp: Brought up 1 node, 4 CPUs [ 1.067921] smpboot: Max logical packages: 1 [ 1.068315] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 1.072379] devtmpfs: initialized [ 1.073528] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 1.074326] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.075356] pinctrl core: initialized pinctrl subsystem [ 1.077829] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.078531] thermal_sys: Registered thermal governor 'step_wise' [ 1.078533] thermal_sys: Registered thermal governor 'user_space' [ 1.079353] cpuidle: using governor menu [ 1.081145] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 1.081317] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 1.082336] PCI: Using configuration type 1 for base access [ 1.084820] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.102319] raid6: sse2x4 gen() 12092 MB/s [ 1.120314] raid6: sse2x2 gen() 12347 MB/s [ 1.137316] raid6: sse2x1 gen() 8380 MB/s [ 1.138097] raid6: using algorithm sse2x2 gen() 12347 MB/s [ 1.155315] raid6: .... xor() 9429 MB/s, rmw enabled [ 1.156092] raid6: using ssse3x2 recovery algorithm [ 1.156418] ACPI: Added _OSI(Module Device) [ 1.157250] ACPI: Added _OSI(Processor Device) [ 1.157315] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.157986] ACPI: Added _OSI(Processor Aggregator Device) [ 1.159159] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.160507] ACPI: Interpreter enabled [ 1.161089] ACPI: PM: (supports S0 S3 S5) [ 1.161319] ACPI: Using IOAPIC for interrupt routing [ 1.162080] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.162325] PCI: Using E820 reservations for host bridge windows [ 1.163310] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.165108] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.165321] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.166387] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.167375] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.168414] PCI host bridge to bus 0000:00 [ 1.169061] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.169316] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.170283] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.170317] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.171315] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.172316] pci_bus 0000:00: root bus resource [mem 0x180000000-0x97fffffff window] [ 1.173316] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.174179] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 1.174952] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 1.176316] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 1.178199] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 1.182317] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 1.185315] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 1.187024] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 1.188878] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 1.190315] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 1.195317] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 1.198056] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 1.200097] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 1.203374] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 1.205343] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 1.209190] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 1.209418] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.211224] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 1.213317] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 1.215127] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 1.220232] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 1.222088] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 1.225643] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 1.227670] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 1.231622] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 1.233594] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 1.237278] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 1.238882] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 1.240056] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 1.243588] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 1.244981] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.245723] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 1.251319] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 1.253874] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 1.255839] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 1.258883] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 1.262511] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.263472] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.264458] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.265453] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.266459] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.267455] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.268522] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.269455] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.270360] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.271267] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.271327] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.272226] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.272326] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.273224] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.273325] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.274208] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.274848] iommu: Default domain type: Translated [ 1.275316] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.276336] SCSI subsystem initialized [ 1.276928] ACPI: bus type USB registered [ 1.277344] usbcore: registered new interface driver usbfs [ 1.278162] usbcore: registered new interface driver hub [ 1.278326] usbcore: registered new device driver usb [ 1.279143] pps_core: LinuxPPS API ver. 1 registered [ 1.279314] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.280320] PTP clock support registered [ 1.281330] Bluetooth: Core ver 2.22 [ 1.281900] NET: Registered PF_BLUETOOTH protocol family [ 1.282315] Bluetooth: HCI device and connection manager initialized [ 1.283324] Bluetooth: HCI socket layer initialized [ 1.284173] Bluetooth: L2CAP socket layer initialized [ 1.284331] Bluetooth: SCO socket layer initialized [ 1.285152] PCI: Using ACPI for IRQ routing [ 1.349156] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.349278] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.349311] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.349321] vgaarb: loaded [ 1.349775] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.350321] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.354431] clocksource: Switched to clocksource kvm-clock [ 1.355372] pnp: PnP ACPI init [ 1.356068] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.357371] pnp: PnP ACPI: found 6 devices [ 1.365419] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.366971] NET: Registered PF_INET protocol family [ 1.367910] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.369861] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.371216] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.372751] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.377511] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 1.379357] TCP: Hash tables configured (established 32768 bind 32768) [ 1.381130] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.382561] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.383696] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.384902] RPC: Registered named UNIX socket transport module. [ 1.386335] RPC: Registered udp transport module. [ 1.387499] RPC: Registered tcp transport module. [ 1.388667] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.391125] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.392528] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.393850] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.395270] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.396497] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.397504] pci_bus 0000:00: resource 9 [mem 0x180000000-0x97fffffff window] [ 1.398878] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.400452] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.402212] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.404375] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.406405] PCI: CLS 0 bytes, default 64 [ 1.407279] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.408607] software IO TLB: mapped [mem 0x000000007bfd8000-0x000000007ffd8000] (64MB) [ 1.410205] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 1.411914] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 1.427061] Initialise system trusted keyrings [ 1.427977] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.430557] NFS: Registering the id_resolver key type [ 1.431343] Key type id_resolver registered [ 1.431950] Key type id_legacy registered [ 1.435174] Key type cifs.idmap registered [ 1.447202] xor: automatically using best checksumming function avx [ 1.448823] Key type asymmetric registered [ 1.449761] Asymmetric key parser 'x509' registered [ 1.452227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.453878] io scheduler mq-deadline registered [ 1.454875] io scheduler kyber registered [ 1.456445] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.458460] ACPI: button: Power Button [PWRF] [ 1.459881] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.462620] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.465816] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.468830] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.471540] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.472646] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 1.473988] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.475260] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.477489] Linux agpgart interface v0.103 [ 1.478216] ACPI: bus type drm_connector registered [ 1.479067] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.479895] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.490174] Console: switching to colour dummy device 80x25 [ 1.491614] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.491617] [drm] features: -context_init [ 1.494495] [drm] number of scanouts: 1 [ 1.495298] [drm] number of cap sets: 0 [ 1.496536] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 1.516925] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.517049] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.553474] Console: switching to colour frame buffer device 160x50 [ 1.578619] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.585882] brd: module loaded [ 1.590619] loop: module loaded [ 1.591603] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.594562] virtio_blk virtio3: [vda] 1020416 512-byte logical blocks (522 MB/498 MiB) [ 1.599327] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.600576] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.602852] scsi host0: ahci [ 1.603582] scsi host1: ahci [ 1.604293] scsi host2: ahci [ 1.604968] scsi host3: ahci [ 1.605608] scsi host4: ahci [ 1.606481] scsi host5: ahci [ 1.606989] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.608122] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.609207] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.610297] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.611459] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.612565] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.615330] e100: Intel(R) PRO/100 Network Driver [ 1.616119] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.617122] e1000: Intel(R) PRO/1000 Network Driver [ 1.617955] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.619349] e1000e: Intel(R) PRO/1000 Network Driver [ 1.620555] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.621680] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.622896] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.624993] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.625828] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.630346] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.637415] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.638640] hub 1-0:1.0: USB hub found [ 1.639234] hub 1-0:1.0: 6 ports detected [ 1.640813] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.641723] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.643011] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.644201] hub 2-0:1.0: USB hub found [ 1.644798] hub 2-0:1.0: 2 ports detected [ 1.646461] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.647232] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.648458] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.649704] hub 3-0:1.0: USB hub found [ 1.650294] hub 3-0:1.0: 2 ports detected [ 1.651781] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.652564] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.653899] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.655026] hub 4-0:1.0: USB hub found [ 1.655829] hub 4-0:1.0: 2 ports detected [ 1.656785] usbcore: registered new interface driver usb-storage [ 1.657761] usbcore: registered new interface driver usbserial_generic [ 1.658742] usbserial: USB Serial support registered for generic [ 1.659733] usbcore: registered new interface driver ftdi_sio [ 1.660721] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.661838] usbcore: registered new interface driver pl2303 [ 1.662669] usbserial: USB Serial support registered for pl2303 [ 1.663582] i8042: PNP: No PS/2 controller found. [ 1.664483] mousedev: PS/2 mouse device common for all mice [ 1.665559] rtc_cmos 00:04: RTC can wake from S4 [ 1.666937] rtc_cmos 00:04: registered as rtc0 [ 1.667703] rtc_cmos 00:04: setting system clock to 2023-03-22T12:05:50 UTC (1679486750) [ 1.668996] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.670604] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.670711] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.671667] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.674380] intel_pstate: CPU model not supported [ 1.675035] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.676656] sdhci: Secure Digital Host Controller Interface driver [ 1.679688] sdhci: Copyright(c) Pierre Ossman [ 1.681046] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.683108] usbcore: registered new interface driver usbhid [ 1.684846] usbhid: USB HID core driver [ 1.686155] u32 classifier [ 1.687088] input device check on [ 1.688165] Actions configured [ 1.689510] NET: Registered PF_INET6 protocol family [ 1.692025] Segment Routing with IPv6 [ 1.693340] In-situ OAM (IOAM) with IPv6 [ 1.694975] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.697213] NET: Registered PF_PACKET protocol family [ 1.699056] Bridge firewalling registered [ 1.700473] Key type dns_resolver registered [ 1.702188] NET: Registered PF_VSOCK protocol family [ 1.704830] IPI shorthand broadcast: enabled [ 1.706741] sched_clock: Marking stable (1564717284, 141942384)->(1816638030, -109978362) [ 1.710167] registered taskstats version 1 [ 1.711843] Loading compiled-in X.509 certificates [ 1.713863] Key type .fscrypt registered [ 1.715443] Key type fscrypt-provisioning registered [ 1.718194] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.721442] Key type encrypted registered [ 1.727300] printk: console [netcon0] enabled [ 1.728378] netconsole: network logging started [ 1.875393] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.919927] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.922197] ata4: SATA link down (SStatus 0 SControl 300) [ 1.923874] ata5: SATA link down (SStatus 0 SControl 300) [ 1.926434] ata6: SATA link down (SStatus 0 SControl 300) [ 1.928876] ata2: SATA link down (SStatus 0 SControl 300) [ 1.934220] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.937072] ata3.00: applying bridge limits [ 1.938827] ata1: SATA link down (SStatus 0 SControl 300) [ 1.939984] ata3.00: configured for UDMA/100 [ 1.942850] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.978776] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.982819] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.009100] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 2.010997] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.014390] IP-Config: Complete: [ 2.015170] device=eth0, hwaddr=52:54:00:12:34:1a, ipaddr=192.168.7.26, mask=255.255.255.0, gw=192.168.7.25 [ 2.016637] host=192.168.7.26, domain=, nis-domain=(none) [ 2.017541] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.017544] nameserver0=8.8.8.8 [ 2.020141] md: Waiting for all devices to be available before autodetect [ 2.021470] md: If you don't use raid, use raid=noautodetect [ 2.022628] md: Autodetecting RAID arrays. [ 2.023358] md: autorun ... [ 2.023862] md: ... autorun DONE. [ 2.038662] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 2.040277] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.041795] devtmpfs: mounted [ 2.044535] Freeing unused kernel image (initmem) memory: 1948K [ 2.045638] Write protecting the kernel read-only data: 22528k [ 2.048508] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.049862] Freeing unused kernel image (rodata/data gap) memory: 300K [ 2.051057] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 2.127371] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.150137] udevd[161]: starting version 3.2.11 [ 2.156023] udevd[162]: starting eudev-3.2.11 [ 2.275138] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.329869] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.404695] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 2.641375] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1+snapshot-01903ca0b1f7e120abd5135fb8554216ae7059c6 qemux86-64 /dev/ttyS0 qemux86-64 login: