[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000258] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000602] Switching to timer-based delay loop, resolution 16ns [ 0.023976] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.035504] Console: colour dummy device 80x30 [ 0.037737] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.038198] pid_max: default: 32768 minimum: 301 [ 0.040051] LSM: Security Framework initializing [ 0.041307] landlock: Up and running. [ 0.045512] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.045644] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.082973] CPU: Testing write buffer coherency: ok [ 0.088257] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.088634] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.116883] /cpus/cpu@0 missing clock-frequency property [ 0.117719] /cpus/cpu@1 missing clock-frequency property [ 0.117867] /cpus/cpu@2 missing clock-frequency property [ 0.118006] /cpus/cpu@3 missing clock-frequency property [ 0.118371] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.136747] cblist_init_generic: Setting adjustable number of callback queues. [ 0.136963] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.141871] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.143435] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.146157] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.148614] rcu: Hierarchical SRCU implementation. [ 0.148723] rcu: Max phase no-delay instances is 1000. [ 0.163614] smp: Bringing up secondary CPUs ... [ 0.176275] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.176444] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.188331] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.188459] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.195132] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.195257] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.196315] smp: Brought up 1 node, 4 CPUs [ 0.196555] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.196718] CPU: All CPU(s) started in SVC mode. [ 0.225335] devtmpfs: initialized [ 0.258542] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.307844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.309447] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.346824] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.363814] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.400138] cpuidle: using governor ladder [ 0.405250] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.405446] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.408038] Serial: AMBA PL011 UART driver [ 0.480897] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.499675] printk: console [ttyAMA0] enabled [ 0.579436] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.594771] cryptd: max_cpu_qlen set to 1000 [ 0.789196] raid6: neonx8 gen() 327 MB/s [ 0.965591] raid6: neonx4 gen() 915 MB/s [ 1.141901] raid6: neonx2 gen() 1053 MB/s [ 1.318776] raid6: neonx1 gen() 770 MB/s [ 1.499221] raid6: int32x8 gen() 77 MB/s [ 1.675522] raid6: int32x4 gen() 90 MB/s [ 1.850953] raid6: int32x2 gen() 306 MB/s [ 2.029865] raid6: int32x1 gen() 388 MB/s [ 2.030350] raid6: using algorithm neonx2 gen() 1053 MB/s [ 2.205156] raid6: .... xor() 599 MB/s, rmw enabled [ 2.205500] raid6: using neon recovery algorithm [ 2.212350] SCSI subsystem initialized [ 2.214293] usbcore: registered new interface driver usbfs [ 2.215023] usbcore: registered new interface driver hub [ 2.215678] usbcore: registered new device driver usb [ 2.216844] pps_core: LinuxPPS API ver. 1 registered [ 2.216981] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.217282] PTP clock support registered [ 2.242380] vgaarb: loaded [ 2.253365] clocksource: Switched to clocksource arch_sys_counter [ 2.350799] NET: Registered PF_INET protocol family [ 2.353257] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.370959] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.371376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.371667] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.372822] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.373566] TCP: Hash tables configured (established 8192 bind 8192) [ 2.376399] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.377093] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.381126] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.389358] RPC: Registered named UNIX socket transport module. [ 2.389694] RPC: Registered udp transport module. [ 2.389818] RPC: Registered tcp transport module. [ 2.389976] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.390336] PCI: CLS 0 bytes, default 64 [ 2.856145] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.919602] NFS: Registering the id_resolver key type [ 2.922365] Key type id_resolver registered [ 2.922638] Key type id_legacy registered [ 2.931311] Key type cifs.idmap registered [ 3.100892] xor: measuring software checksum speed [ 3.119454] arm4regs : 585 MB/sec [ 3.134401] 8regs : 701 MB/sec [ 3.148456] 32regs : 956 MB/sec [ 3.165984] neon : 751 MB/sec [ 3.166426] xor: using function: 32regs (956 MB/sec) [ 3.166796] async_tx: api initialized (async) [ 3.176855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.177373] io scheduler mq-deadline registered [ 3.177729] io scheduler kyber registered [ 3.188743] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.190693] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.192674] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.194602] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.198442] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.199201] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.199538] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.199788] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.203825] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.215277] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.216328] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.216662] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.216994] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.219037] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.219397] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.222340] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.222850] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.223155] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.227763] PCI: bus0: Fast back to back transfers disabled [ 3.231000] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.232710] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.233250] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.233617] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.233883] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.234150] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.236729] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.257369] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.261582] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 3.320768] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 3.322476] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.322586] [drm] features: -context_init [ 3.326444] [drm] number of scanouts: 1 [ 3.326926] printk: console [hvc0] enabled [ 3.327117] [drm] number of cap sets: 0 [ 3.378197] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.465185] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 3.510652] Console: switching to colour frame buffer device 160x50 [ 3.534772] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.647214] brd: module loaded [ 3.649173] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 3.661240] virtio_blk virtio1: [vda] 4698558 512-byte logical blocks (2.41 GB/2.24 GiB) [ 3.713329] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.714541] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 3.720221] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 3.729164] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.729827] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.730545] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 3.744255] hub 1-0:1.0: USB hub found [ 3.746398] hub 1-0:1.0: 4 ports detected [ 3.757062] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.763372] hub 2-0:1.0: USB hub found [ 3.764356] hub 2-0:1.0: 4 ports detected [ 3.787134] rtc-pl031 9010000.pl031: registered as rtc0 [ 3.789309] rtc-pl031 9010000.pl031: setting system clock to 2023-03-22T22:23:44 UTC (1679523824) [ 3.798987] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.809226] usbcore: registered new interface driver usbhid [ 3.809930] usbhid: USB HID core driver [ 3.812158] u32 classifier [ 3.812650] input device check on [ 3.813011] Actions configured [ 3.818597] NET: Registered PF_INET6 protocol family [ 3.841374] Segment Routing with IPv6 [ 3.842776] In-situ OAM (IOAM) with IPv6 [ 3.844709] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.851223] NET: Registered PF_PACKET protocol family [ 3.853181] Bridge firewalling registered [ 3.854995] Key type dns_resolver registered [ 3.857715] NET: Registered PF_VSOCK protocol family [ 3.860264] Registering SWP/SWPB emulation handler [ 3.904323] registered taskstats version 1 [ 3.907740] Key type .fscrypt registered [ 3.908168] Key type fscrypt-provisioning registered [ 3.919484] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 3.924259] Key type encrypted registered [ 3.987844] printk: console [netcon0] enabled [ 3.988831] netconsole: network logging started [ 4.053190] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 4.073045] IP-Config: Complete: [ 4.073679] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.074756] host=192.168.7.4, domain=, nis-domain=(none) [ 4.075107] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.075182] nameserver0=8.8.8.8 [ 4.088376] md: Waiting for all devices to be available before autodetect [ 4.089134] md: If you don't use raid, use raid=noautodetect [ 4.089685] md: Autodetecting RAID arrays. [ 4.090129] md: autorun ... [ 4.090434] md: ... autorun DONE. [ 4.251777] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 4.256775] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.263796] devtmpfs: mounted [ 4.475429] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 4.481058] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 4.642581] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 4.673058] Freeing unused kernel image (initmem) memory: 2048K [ 4.978361] Run /sbin/init as init process [ 5.093364] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 5.164685] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 7.677263] udevd[178]: starting version 3.2.11 [ 8.352555] udevd[179]: starting eudev-3.2.11 [ 11.752127] EXT4-fs (vda): re-mounted. Quota mode: disabled. [ 12.350437] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.1.14-yocto-standard #1 SMP PREEMPT Mon Feb 27 14:44:40 UTC 2023 armv7l Kernel command line: root=/dev/vda rw mem=768M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 22 22:24:03 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [A[74G[ ok ] Starting Telephony daemon Starting crond: OK D-BUS per-session daemon address is: unix:path=/tmp/dbus-Z6Pu3Fbtgw,guid=b34b1ac2bb7a77a35d065dbf641b8006 Starting tcf-agent: OK Using calibration data stored in /etc/pointercal.xinput Poky (Yocto Project Reference Distro) 4.1+snapshot-1acf32ee1a67fe34eaf19bb89b579a25bd88c8cd qemuarm hvc0 qemuarm login: Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[684]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=702 comm="matchbox-panel --start-applets showdesktop,windows") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[684]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry [ 2025.528482] hellomod: loading out-of-tree module taints kernel. [ 2025.539112] Hello world! [ 2031.237028] Cleaning up hellomod.