[ 0.000000] Linux version 6.1.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT_DYNAMIC Mon Feb 27 14:44:30 UTC 2023 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] random: crng init done [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000b060df] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060e0-0x0000000000b060ef] usable [ 0.000000] reserve setup_data: [mem 0x0000000000b060f0-0x000000003ffd7fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003ffd8000-0x000000003fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000003] kvm-clock: using sched offset of 1096155040 cycles [ 0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000014] tsc: Detected 2599.996 MHz processor [ 0.002875] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000 [ 0.002931] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.018067] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf] [ 0.018484] ACPI: Early table checksum verification disabled [ 0.018532] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS ) [ 0.018545] ACPI: RSDT 0x000000003FFE240C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018562] ACPI: FACP 0x000000003FFE21EC 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018571] ACPI: DSDT 0x000000003FFE0040 0021AC (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018577] ACPI: FACS 0x000000003FFE0000 000040 [ 0.018581] ACPI: APIC 0x000000003FFE22E0 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018586] ACPI: HPET 0x000000003FFE2370 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018591] ACPI: MCFG 0x000000003FFE23A8 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018595] ACPI: WAET 0x000000003FFE23E4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018599] ACPI: Reserving FACP table memory at [mem 0x3ffe21ec-0x3ffe22df] [ 0.018601] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe21eb] [ 0.018603] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] [ 0.018604] ACPI: Reserving APIC table memory at [mem 0x3ffe22e0-0x3ffe236f] [ 0.018605] ACPI: Reserving HPET table memory at [mem 0x3ffe2370-0x3ffe23a7] [ 0.018606] ACPI: Reserving MCFG table memory at [mem 0x3ffe23a8-0x3ffe23e3] [ 0.018607] ACPI: Reserving WAET table memory at [mem 0x3ffe23e4-0x3ffe240b] [ 0.026309] Zone ranges: [ 0.026314] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026321] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] [ 0.026324] Normal empty [ 0.026325] Movable zone start for each node [ 0.026326] Early memory node ranges [ 0.026327] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026333] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] [ 0.026338] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] [ 0.026358] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026402] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.059187] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.059863] ACPI: PM-Timer IO Port: 0x608 [ 0.059887] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.059944] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.059950] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.059953] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.059956] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.059962] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.059964] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.059973] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.059976] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.059990] TSC deadline timer available [ 0.059993] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.060082] [mem 0x40000000-0xafffffff] available for PCI devices [ 0.060085] Booting paravirtualized kernel on KVM [ 0.060103] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.060119] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.062990] percpu: Embedded 54 pages/cpu s180648 r8192 d32344 u524288 [ 0.063113] Built 1 zonelists, mobility grouping on. Total pages: 257751 [ 0.063119] Kernel command line: root=/dev/vda rw ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.063488] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.063600] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.073491] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.084748] Memory: 997508K/1048024K available (16395K kernel code, 2281K rwdata, 3796K rodata, 1948K init, 1744K bss, 50256K reserved, 0K cma-reserved) [ 0.084875] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.084904] Kernel/User page tables isolation: enabled [ 0.084940] ftrace: allocating 48067 entries in 188 pages [ 0.112558] ftrace: allocated 188 pages with 5 groups [ 0.112728] Dynamic Preempt: full [ 0.127585] rcu: Preemptible hierarchical RCU implementation. [ 0.127590] rcu: RCU event tracing is enabled. [ 0.127591] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.127596] All grace periods are expedited (rcu_expedited). [ 0.127597] Trampoline variant of Tasks RCU enabled. [ 0.127598] Rude variant of Tasks RCU enabled. [ 0.127599] Tracing variant of Tasks RCU enabled. [ 0.127601] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.127602] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.135710] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.146887] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.147093] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.168054] Console: colour VGA+ 80x25 [ 0.611879] printk: console [ttyS0] enabled [ 0.612679] ACPI: Core revision 20220331 [ 0.613636] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.615578] APIC: Switch to symmetric I/O mode setup [ 0.617136] x2apic enabled [ 0.618280] Switched APIC routing to physical x2apic. [ 0.620973] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.623511] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.628002] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.629000] pid_max: default: 32768 minimum: 301 [ 0.629000] LSM: Security Framework initializing [ 0.629000] landlock: Up and running. [ 0.630560] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.631014] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.632226] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.633000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.633019] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.634031] Spectre V2 : Mitigation: Retpolines [ 0.635006] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.636007] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.637010] Speculative Store Bypass: Vulnerable [ 0.638034] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.639007] MMIO Stale Data: Unknown: No mitigations [ 0.640007] SRBDS: Unknown: Dependent on hypervisor status [ 0.662000] Freeing SMP alternatives memory: 52K [ 0.662315] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.664543] cblist_init_generic: Setting adjustable number of callback queues. [ 0.665012] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.666090] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.667066] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.668075] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.669146] rcu: Hierarchical SRCU implementation. [ 0.670013] rcu: Max phase no-delay instances is 400. [ 0.671423] smp: Bringing up secondary CPUs ... [ 0.672186] x86: Booting SMP configuration: [ 0.672994] .... node #0, CPUs: #1 #2 #3 [ 0.678330] smp: Brought up 1 node, 4 CPUs [ 0.679817] smpboot: Max logical packages: 1 [ 0.680007] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.686072] devtmpfs: initialized [ 0.689167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.690016] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.691071] pinctrl core: initialized pinctrl subsystem [ 0.693951] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.694351] thermal_sys: Registered thermal governor 'step_wise' [ 0.694355] thermal_sys: Registered thermal governor 'user_space' [ 0.696009] cpuidle: using governor menu [ 0.697000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.699017] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.702061] PCI: Using configuration type 1 for base access [ 0.706082] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.726009] raid6: sse2x4 gen() 19784 MB/s [ 0.754000] raid6: sse2x2 gen() 38406 MB/s [ 0.775000] raid6: sse2x1 gen() 10861 MB/s [ 0.783011] raid6: using algorithm sse2x2 gen() 38406 MB/s [ 0.809218] raid6: .... xor() 5937 MB/s, rmw enabled [ 0.822014] raid6: using ssse3x2 recovery algorithm [ 0.823175] ACPI: Added _OSI(Module Device) [ 0.824010] ACPI: Added _OSI(Processor Device) [ 0.825000] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.825000] ACPI: Added _OSI(Processor Aggregator Device) [ 0.836531] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.881511] ACPI: Interpreter enabled [ 0.881511] ACPI: PM: (supports S0 S3 S5) [ 0.882000] ACPI: Using IOAPIC for interrupt routing [ 0.886117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.888011] PCI: Using E820 reservations for host bridge windows [ 0.890483] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.900300] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.904032] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.917108] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.919463] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.921148] PCI host bridge to bus 0000:00 [ 0.923011] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.928017] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.930015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.932014] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] [ 0.942017] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.944016] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.945015] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.946131] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.954212] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.959012] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.966020] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.975000] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.980021] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 1.008358] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 1.011017] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 1.025014] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 1.029012] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 1.045057] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 1.055098] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 1.063046] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 1.073041] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 1.082054] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 1.085606] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.090332] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 1.096009] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 1.102009] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 1.111937] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 1.123134] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 1.130644] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 1.140397] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 1.152016] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 1.157942] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 1.174468] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 1.177708] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 1.199019] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 1.231651] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 1.237757] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.243541] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 1.268613] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 1.274012] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 1.279178] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 1.285623] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 1.293499] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.299234] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.300175] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.301171] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.301174] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.302000] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.303162] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.304168] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.315124] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.316038] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.317036] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.318035] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.328058] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.330049] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.331039] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.333040] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.337876] iommu: Default domain type: Translated [ 1.339010] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.342275] SCSI subsystem initialized [ 1.344022] ACPI: bus type USB registered [ 1.345062] usbcore: registered new interface driver usbfs [ 1.347050] usbcore: registered new interface driver hub [ 1.348047] usbcore: registered new device driver usb [ 1.349083] pps_core: LinuxPPS API ver. 1 registered [ 1.350008] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.352036] PTP clock support registered [ 1.353615] Bluetooth: Core ver 2.22 [ 1.354025] NET: Registered PF_BLUETOOTH protocol family [ 1.357015] Bluetooth: HCI device and connection manager initialized [ 1.359039] Bluetooth: HCI socket layer initialized [ 1.360023] Bluetooth: L2CAP socket layer initialized [ 1.361048] Bluetooth: SCO socket layer initialized [ 1.362127] PCI: Using ACPI for IRQ routing [ 1.544042] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.545000] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.545000] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.555018] vgaarb: loaded [ 1.555753] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.557006] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.570004] clocksource: Switched to clocksource kvm-clock [ 2.029981] pnp: PnP ACPI init [ 2.031640] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 2.036360] pnp: PnP ACPI: found 6 devices [ 2.417102] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 2.427132] NET: Registered PF_INET protocol family [ 2.436349] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.446492] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 2.481474] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.484175] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.489645] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 2.491470] TCP: Hash tables configured (established 8192 bind 8192) [ 2.493091] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.497740] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.499364] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.583242] RPC: Registered named UNIX socket transport module. [ 2.590900] RPC: Registered udp transport module. [ 2.591902] RPC: Registered tcp transport module. [ 2.592859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.594235] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 2.597596] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 2.598909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 2.600361] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] [ 2.601799] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 2.605907] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 2.609873] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 2.632704] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 2.635909] pci 0000:00:1d.1: quirk_usb_early_handoff+0x0/0x700 took 21430 usecs [ 2.639595] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 2.650892] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 2.683571] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x700 took 40635 usecs [ 2.696714] PCI: CLS 0 bytes, default 64 [ 2.734535] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 2.750643] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 2.815228] Initialise system trusted keyrings [ 2.820512] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 2.842606] NFS: Registering the id_resolver key type [ 2.844221] Key type id_resolver registered [ 2.845135] Key type id_legacy registered [ 2.887153] Key type cifs.idmap registered [ 2.899411] xor: automatically using best checksumming function avx [ 2.910501] Key type asymmetric registered [ 2.911407] Asymmetric key parser 'x509' registered [ 2.912486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 2.914069] io scheduler mq-deadline registered [ 2.918401] io scheduler kyber registered [ 2.998638] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.007331] ACPI: button: Power Button [PWRF] [ 3.028212] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 3.055967] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 3.082187] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 3.087365] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 3.110510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.112148] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 3.115092] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.122557] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.141683] Linux agpgart interface v0.103 [ 3.142913] ACPI: bus type drm_connector registered [ 3.144201] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 3.145353] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 3.162940] Console: switching to colour dummy device 80x25 [ 3.175856] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.175861] [drm] features: -context_init [ 3.179148] [drm] number of scanouts: 1 [ 3.179961] [drm] number of cap sets: 0 [ 3.181991] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.220458] fbcon: virtio_gpudrmfb (fb0) is primary device [ 3.220810] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 3.301520] Console: switching to colour frame buffer device 160x50 [ 3.456392] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.557800] brd: module loaded [ 3.983031] loop: module loaded [ 4.001518] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 4.052883] virtio_blk virtio3: [vda] 833752 512-byte logical blocks (427 MB/407 MiB) [ 4.206555] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 4.236237] ahci 0000:00:1f.2: flags: 64bit ncq only [ 4.241462] scsi host0: ahci [ 4.288454] scsi host1: ahci [ 4.350174] scsi host2: ahci [ 4.360092] scsi host3: ahci [ 4.361375] scsi host4: ahci [ 4.363163] scsi host5: ahci [ 4.363973] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 4.372521] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 4.374145] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 4.375720] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 4.391113] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 4.392868] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 4.407836] e100: Intel(R) PRO/100 Network Driver [ 4.437347] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.438883] e1000: Intel(R) PRO/1000 Network Driver [ 4.439891] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 4.441101] e1000e: Intel(R) PRO/1000 Network Driver [ 4.442105] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.445221] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.446325] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.471323] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.473036] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.475057] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 4.483171] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.488667] hub 1-0:1.0: USB hub found [ 4.490015] hub 1-0:1.0: 6 ports detected [ 4.492483] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.498863] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.500663] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 4.502800] hub 2-0:1.0: USB hub found [ 4.505845] hub 2-0:1.0: 2 ports detected [ 4.509668] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 4.524583] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 4.527375] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 4.529442] hub 3-0:1.0: USB hub found [ 4.542664] hub 3-0:1.0: 2 ports detected [ 4.547835] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.550155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 4.551985] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 4.555812] hub 4-0:1.0: USB hub found [ 4.557654] hub 4-0:1.0: 2 ports detected [ 4.564360] usbcore: registered new interface driver usb-storage [ 4.567370] usbcore: registered new interface driver usbserial_generic [ 4.571363] usbserial: USB Serial support registered for generic [ 4.572559] usbcore: registered new interface driver ftdi_sio [ 4.573684] usbserial: USB Serial support registered for FTDI USB Serial Device [ 4.575106] usbcore: registered new interface driver pl2303 [ 4.576181] usbserial: USB Serial support registered for pl2303 [ 4.578552] i8042: PNP: No PS/2 controller found. [ 4.579921] mousedev: PS/2 mouse device common for all mice [ 4.582196] rtc_cmos 00:04: RTC can wake from S4 [ 4.584707] rtc_cmos 00:04: registered as rtc0 [ 4.586383] rtc_cmos 00:04: setting system clock to 2023-03-25T03:36:38 UTC (1679715398) [ 4.588456] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 4.593586] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 4.594990] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 4.596508] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 4.670727] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.695575] intel_pstate: CPU model not supported [ 4.696650] sdhci: Secure Digital Host Controller Interface driver [ 4.697791] sdhci: Copyright(c) Pierre Ossman [ 4.698656] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.720035] ata2: SATA link down (SStatus 0 SControl 300) [ 4.742027] ata5: SATA link down (SStatus 0 SControl 300) [ 4.743766] ata1: SATA link down (SStatus 0 SControl 300) [ 4.759835] ata6: SATA link down (SStatus 0 SControl 300) [ 4.774639] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.776732] ata4: SATA link down (SStatus 0 SControl 300) [ 4.795302] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.117434] usbcore: registered new interface driver usbhid [ 5.118879] usbhid: USB HID core driver [ 5.119356] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 5.128463] u32 classifier [ 5.128468] input device check on [ 5.128469] Actions configured [ 5.128722] NET: Registered PF_INET6 protocol family [ 5.131062] Segment Routing with IPv6 [ 5.131075] In-situ OAM (IOAM) with IPv6 [ 5.131118] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.131358] NET: Registered PF_PACKET protocol family [ 5.131385] Bridge firewalling registered [ 5.131445] Key type dns_resolver registered [ 5.131612] NET: Registered PF_VSOCK protocol family [ 5.169967] ata3.00: applying bridge limits [ 5.175023] IPI shorthand broadcast: enabled [ 5.176243] ata3.00: configured for UDMA/100 [ 5.180194] sched_clock: Marking stable (4703922734, 476096445)->(6199034019, -1019014840) [ 5.199077] registered taskstats version 1 [ 5.200028] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 5.200604] Loading compiled-in X.509 certificates [ 5.205227] Key type .fscrypt registered [ 5.206108] Key type fscrypt-provisioning registered [ 5.208829] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 5.226091] Key type encrypted registered [ 5.228329] printk: console [netcon0] enabled [ 5.229292] netconsole: network logging started [ 5.256636] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 5.260148] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 5.298979] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 5.300730] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.716065] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 5.731053] IP-Config: Complete: [ 5.736162] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 5.738121] device=eth0, hwaddr=52:54:00:12:34:1a, ipaddr=192.168.7.26, mask=255.255.255.0, gw=192.168.7.25 [ 5.768387] host=192.168.7.26, domain=, nis-domain=(none) [ 5.770044] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.770052] nameserver0=8.8.8.8 [ 5.808067] md: Waiting for all devices to be available before autodetect [ 5.810298] md: If you don't use raid, use raid=noautodetect [ 5.811581] md: Autodetecting RAID arrays. [ 5.812580] md: autorun ... [ 5.813391] md: ... autorun DONE. [ 5.846266] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 5.847678] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.849051] devtmpfs: mounted [ 5.852367] Freeing unused kernel image (initmem) memory: 1948K [ 5.855132] Write protecting the kernel read-only data: 22528k [ 5.859019] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 5.862526] Freeing unused kernel image (rodata/data gap) memory: 300K [ 5.863957] Run /sbin/init as init process INIT: version 3.04 booting [ 5.983459] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 6.035036] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 Starting udev [ 6.339855] udevd[160]: starting version 3.2.11 [ 6.387599] udevd[161]: starting eudev-3.2.11 [ 8.082238] EXT4-fs (vda): re-mounted. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1+snapshot-92993b4f77ec49b7f04458b722ede0f8a218e0e8 qemux86-64 /dev/ttyS0 qemux86-64 login: