DEBUG: Executing python function extend_recipe_sysroot NOTE: Direct dependencies are ['/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/qemu/qemu-helper-native_1.0.bb:do_populate_sysroot', '/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/qemu/qemu-native_7.2.0.bb:do_populate_sysroot', '/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/qemu/qemu-system-native_7.2.0.bb:do_populate_sysroot', 'virtual:native:/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/createrepo-c/createrepo-c_0.20.1.bb:do_populate_sysroot', 'virtual:native:/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/dnf/dnf_4.14.0.bb:do_populate_sysroot', 'virtual:native:/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-devtools/unfs3/unfs3_git.bb:do_populate_sysroot', 'virtual:native:/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/recipes-extended/cpio/cpio_2.13.bb:do_populate_sysroot'] NOTE: Installed into sysroot: ['cpio-native'] NOTE: Skipping as already exists in sysroot: ['qemu-helper-native', 'qemu-native', 'qemu-system-native', 'createrepo-c-native', 'dnf-native', 'pseudo-native', 'unfs3-native', 'file-native', 'python3-native', 'sqlite3-native', 'curl-native', 'cmake-native', 'expat-native', 'zlib-native', 'xz-native', 'rpm-native', 'glib-2.0-native', 'openssl-native', 'libxml2-native', 'texinfo-dummy-native', 'gettext-minimal-native', 'libtool-native', 'python3-iniparse-native', 'librepo-native', 'libcomps-native', 'libdnf-native', 'libepoxy-native', 'alsa-lib-native', 'libslirp-native', 'dtc-native', 'virglrenderer-native', 'pixman-native', 'libsdl2-native', 'libtirpc-native', 'flex-native', 'bzip2-native', 'libffi-native', 'util-linux-libuuid-native', 'libnsl2-native', 'readline-native', 'gdbm-native', 'ncurses-native', 'zstd-native', 'libgcrypt-native', 'lua-native', 'popt-native', 'elfutils-native', 'util-linux-native', 'gettext-native', 'libpcre2-native', 'perl-native', 'python3-wheel-native', 'python3-installer-native', 'python3-setuptools-native', 'python3-build-native', 'python3-six-native', 'attr-native', 'gpgme-native', 'libcheck-native', 'json-c-native', 'swig-native', 'libsolv-native', 'gobject-introspection-native', 'libmodulemd-native', 'mesa-native', 'libx11-native', 'libdrm-native', 'libxrandr-native', 'libxext-native', 'libxrender-native', 'm4-native', 'libcap-native', 'libgpg-error-native', 'libarchive-native', 'libmicrohttpd-native', 'libcap-ng-native', 'make-native', 'python3-flit-core-native', 'python3-packaging-native', 'python3-pyproject-hooks-native', 'libassuan-native', 'libyaml-native', 'llvm-native', 'libxxf86vm-native', 'makedepend-native', 'xorgproto-native', 'libxfixes-native', 'chrpath-native', 'libxdamage-native', 'python3-mako-native', 'libxshmfence-native', 'wayland-native', 'wayland-protocols-native', 'xrandr-native', 'util-macros-native', 'libxcb-native', 'xtrans-native', 'libpthread-stubs-native', 'libpciaccess-native', 'gnu-config-native', 'gnutls-native', 'unzip-native', 'libedit-native', 'python3-pygments-native', 'python3-markupsafe-native', 'libxdmcp-native', 'xcb-proto-native', 'libxau-native', 'libidn2-native', 'libunistring-native', 'nettle-native', 'gmp-native'] DEBUG: Python function extend_recipe_sysroot finished DEBUG: Executing python function do_testimage DEBUG: test suites: test_ping (ping.PingTest) test_ssh (ssh.SSHTest) test_parselogs (parselogs.ParseLogsTest) test_ptestrunner_expectfail (ptest.PtestRunnerTest) test_ptestrunner_expectsuccess (ptest.PtestRunnerTest) DEBUG: Using kvm for runqemu QMP Available for connection at /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/.ockkiy_i DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:50295 DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:54203 DEBUG: launchcmd=runqemu snapshot kvm qemux86-64 /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/core-image-ptest-glib-networking-qemux86-64.ext4 tcpserial=50295:54203 bootparams=" printk.time=1" qemuparams="-pidfile /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/pidfile_326628 -S -qmp unix:./.9ba4guhu,server,wait -qmp unix:./.ockkiy_i,server,nowait" DEBUG: runqemu started, pid is 327018 DEBUG: waiting at most 300 seconds for qemu pid (03/28/23 01:32:56) DEBUG: QMP Initializing to /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/.9ba4guhu /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/work/qemux86_64-poky-linux/core-image-ptest-glib-networking/1.0-r0/recipe-sysroot-native/usr/lib/qemu-python/qmp/legacy.py:82: DeprecationWarning: There is no current event loop self._aloop = asyncio.get_event_loop() DEBUG: QMP Connecting to /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/.9ba4guhu QMP connected to QEMU at 03/28/23 01:32:56 and took 0.5701844692230225 seconds QMP released QEMU at 03/28/23 01:32:56 and took 0.17713403701782227 seconds from connect DEBUG: qemu started in 0.7451076507568359 seconds - qemu procces pid is 327654 (03/28/23 01:32:56) DEBUG: qemu cmdline used: /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:16 -netdev tap,id=net0,ifname=tap10,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive file=/home/pokybuild/tmp/core-image-ptest-glib-networking-qemux86-64.ext4.327025,if=virtio,format=raw -usb -device usb-tablet -usb -device usb-kbd -cpu IvyBridge -machine q35,i8042=off -smp 4 -enable-kvm -m 1024 -serial tcp:127.0.0.1:50295 -serial tcp:127.0.0.1:54203 -pidfile /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/pidfile_326628 -S -qmp unix:./.9ba4guhu,server,wait -qmp unix:./.ockkiy_i,server,nowait -serial mon:vc -device virtio-vga -display sdl,show-cursor=on -kernel /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/bzImage -append root=/dev/vda rw ip=192.168.7.22::192.168.7.21:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 DEBUG: Target IP: 192.168.7.22 DEBUG: Server IP: 192.168.7.21 DEBUG: Starting logging thread DEBUG: Starting thread event loop DEBUG: Connection request received DEBUG: Setting connection established event DEBUG: Output from runqemu: runqemu - INFO - Using /home/pokybuild/bin/runqemu-renice to renice runqemu - INFO - Continuing with the following parameters: KERNEL: [/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/bzImage] MACHINE: [qemux86-64] FSTYPE: [ext4] ROOTFS: [/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/core-image-ptest-glib-networking-qemux86-64.ext4] CONFFILE: [/home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/core-image-ptest-glib-networking-qemux86-64.qemuboot.conf] runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap1.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap2.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap3.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap4.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap5.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap6.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap7.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap8.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap9.lock failed: [Errno 11] Resource temporarily unavailable runqemu - INFO - Using preconfigured tap device tap10 runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap10.skip to make runqemu skip tap10. runqemu - INFO - Network configuration: ip=192.168.7.22::192.168.7.21:255.255.255.0::eth0:off:8.8.8.8 runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-ptest-glib-networking-qemux86-64.ext4.327025 runqemu - INFO - Copy done in 0.35077500343322754 seconds runqemu - INFO - Running /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:16 -netdev tap,id=net0,ifname=tap10,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive file=/home/pokybuild/tmp/core-image-ptest-glib-networking-qemux86-64.ext4.327025,if=virtio,format=raw -usb -device usb-tablet -usb -device usb-kbd -cpu IvyBridge -machine q35,i8042=off -smp 4 -enable-kvm -m 1024 -serial tcp:127.0.0.1:50295 -serial tcp:127.0.0.1:54203 -pidfile /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/pidfile_326628 -S -qmp unix:./.9ba4guhu,server,wait -qmp unix:./.ockkiy_i,server,nowait -serial mon:vc -device virtio-vga -display sdl,show-cursor=on -kernel /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/deploy/images/qemux86-64/bzImage -append 'root=/dev/vda rw ip=192.168.7.22::192.168.7.21:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1' runqemu - INFO - Host uptime: 177024.87 DEBUG: Waiting at most 1500 seconds for login banner (03/28/23 01:32:56) DEBUG: Connection from 127.0.0.1:50722 /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/meta/lib/oeqa/utils/qemurunner.py:486: ResourceWarning: unclosed self.server_socket = qemusock ResourceWarning: Enable tracemalloc to get the object allocation traceback DEBUG: Reached login banner in 3.4931085109710693 seconds (03/28/23 01:33:00, 1679967180.4914944) DEBUG: Logged as root in serial console NOTE: test_ping (ping.PingTest) DEBUG: Setting up a 30 second(s) timeout DEBUG: Removed SIGALRM handler NOTE: ... ok NOTE: test_ssh (ssh.SSHTest) DEBUG: Checking if at least one of dropbear, openssh-sshd is installed DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; uname -a DEBUG: Waiting for process output: time: 1679967183.6183066, endtime: 1679967483.6166573 DEBUG: Partial data from SSH call: Linux qemux86-64 6.1.20-yocto-standard #1 SMP PREEMPT_DYNAMIC Sat Mar 18 02:48:04 UTC 2023 x86_64 GNU/Linux DEBUG: Waiting for process output: time: 1679967183.948229, endtime: 1679967483.9482272 DEBUG: Data from SSH call: Linux qemux86-64 6.1.20-yocto-standard #1 SMP PREEMPT_DYNAMIC Sat Mar 18 02:48:04 UTC 2023 x86_64 GNU/Linux DEBUG: [Command returned '0' after 0.53 seconds] DEBUG: Command: uname -a Status: 0 Output: Linux qemux86-64 6.1.20-yocto-standard #1 SMP PREEMPT_DYNAMIC Sat Mar 18 02:48:04 UTC 2023 x86_64 GNU/Linux DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /etc/controllerimage DEBUG: Waiting for process output: time: 1679967184.1504977, endtime: 1679967484.149304 DEBUG: Partial data from SSH call: cat: can't open '/etc/controllerimage': No such file or directory DEBUG: Waiting for process output: time: 1679967184.4762583, endtime: 1679967484.4762566 DEBUG: Data from SSH call: cat: can't open '/etc/controllerimage': No such file or directory DEBUG: [Command returned '1' after 0.53 seconds] DEBUG: Command: cat /etc/controllerimage Status: 1 Output: cat: can't open '/etc/controllerimage': No such file or directory NOTE: ... ok DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; which LSB_Test.sh DEBUG: Waiting for process output: time: 1679967184.6796062, endtime: 1679967484.6781695 DEBUG: Data from SSH call: DEBUG: [Command returned '1' after 0.35 seconds] DEBUG: Command: which LSB_Test.sh Status: 1 Output: NOTE: test_parselogs (parselogs.ParseLogsTest) DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; dmesg > /tmp/dmesg_output.log DEBUG: Waiting for process output: time: 1679967185.0486736, endtime: 1679967485.0310006 DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.35 seconds] DEBUG: Command: dmesg > /tmp/dmesg_output.log Status: 0 Output: DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /var/log/ DEBUG: Waiting for process output: time: 1679967185.3797226, endtime: 1679967485.378696 DEBUG: Data from SSH call: DEBUG: [Command returned '1' after 0.33 seconds] DEBUG: Command: test -f /var/log/ Status: 1 Output: DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -d /var/log/ DEBUG: Waiting for process output: time: 1679967185.7096293, endtime: 1679967485.7085066 DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.33 seconds] DEBUG: Command: test -d /var/log/ Status: 0 Output: DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; find /var/log//*.log -maxdepth 1 -type f DEBUG: Waiting for process output: time: 1679967186.038232, endtime: 1679967486.0371933 DEBUG: Partial data from SSH call: find: /var/log//*.log: No such file or directory DEBUG: Waiting for process output: time: 1679967186.3693564, endtime: 1679967486.369355 DEBUG: Data from SSH call: find: /var/log//*.log: No such file or directory DEBUG: [Command returned '1' after 0.53 seconds] DEBUG: Command: find /var/log//*.log -maxdepth 1 -type f Status: 1 Output: find: /var/log//*.log: No such file or directory DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /var/log/dmesg DEBUG: Waiting for process output: time: 1679967186.5714092, endtime: 1679967486.5703535 DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.33 seconds] DEBUG: Command: test -f /var/log/dmesg Status: 0 Output: DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; test -f /tmp/dmesg_output.log DEBUG: Waiting for process output: time: 1679967186.9052768, endtime: 1679967486.9041567 DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.33 seconds] DEBUG: Command: test -f /tmp/dmesg_output.log Status: 0 Output: DEBUG: [Running]$ scp -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR root@192.168.7.22:/var/log/dmesg /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/work/qemux86_64-poky-linux/core-image-ptest-glib-networking/1.0-r0/target_logs DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.14 seconds] DEBUG: [Running]$ scp -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR root@192.168.7.22:/tmp/dmesg_output.log /home/pokybuild/yocto-worker/qemux86-64-ptest-fast/build/build/tmp/work/qemux86_64-poky-linux/core-image-ptest-glib-networking/1.0-r0/target_logs DEBUG: Data from SSH call: DEBUG: [Command returned '0' after 0.15 seconds] DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "model name" | head -n1 | awk 'BEGIN{FS=":"}{print $2}' DEBUG: Waiting for process output: time: 1679967187.5377846, endtime: 1679967487.5365214 DEBUG: Partial data from SSH call: Intel Xeon E3-12xx v2 (Ivy Bridge) DEBUG: Waiting for process output: time: 1679967187.87335, endtime: 1679967487.873348 DEBUG: Data from SSH call: Intel Xeon E3-12xx v2 (Ivy Bridge) DEBUG: [Command returned '0' after 0.54 seconds] DEBUG: Command: cat /proc/cpuinfo | grep "model name" | head -n1 | awk 'BEGIN{FS=":"}{print $2}' Status: 0 Output: Intel Xeon E3-12xx v2 (Ivy Bridge) DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "cpu cores" | head -n1 | awk {'print $4'} DEBUG: Waiting for process output: time: 1679967188.0761151, endtime: 1679967488.0748007 DEBUG: Partial data from SSH call: 4 DEBUG: Waiting for process output: time: 1679967188.4133446, endtime: 1679967488.4133432 DEBUG: Data from SSH call: 4 DEBUG: [Command returned '0' after 0.54 seconds] DEBUG: Command: cat /proc/cpuinfo | grep "cpu cores" | head -n1 | awk {'print $4'} Status: 0 Output: 4 DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; cat /proc/cpuinfo | grep "processor" | wc -l DEBUG: Waiting for process output: time: 1679967188.6159046, endtime: 1679967488.614674 DEBUG: Partial data from SSH call: 4 DEBUG: Waiting for process output: time: 1679967188.9519281, endtime: 1679967488.9519262 DEBUG: Data from SSH call: 4 DEBUG: [Command returned '0' after 0.54 seconds] DEBUG: Command: cat /proc/cpuinfo | grep "processor" | wc -l Status: 0 Output: 4 DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; uname -m DEBUG: Waiting for process output: time: 1679967189.1544986, endtime: 1679967489.1530657 DEBUG: Partial data from SSH call: x86_64 DEBUG: Waiting for process output: time: 1679967189.4865735, endtime: 1679967489.4865716 DEBUG: Data from SSH call: x86_64 DEBUG: [Command returned '0' after 0.53 seconds] DEBUG: Command: uname -m Status: 0 Output: x86_64 NOTE: ... ok NOTE: test_ptestrunner_expectfail (ptest.PtestRunnerTest) DEBUG: Checking if at least one of ptest-runner is installed DEBUG: Checking if ptest is in DISTRO_FEATURES or IMAGE_FEATURES DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; which ptest-runner DEBUG: Data from SSH call: /usr/bin/ptest-runner DEBUG: [Command returned '0' after 0.13 seconds] DEBUG: Command: which ptest-runner Status: 0 Output: /usr/bin/ptest-runner DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; ptest-runner -t 450 -d "/usr/lib" DEBUG: Data from SSH call: START: ptest-runner 2023-03-28T01:33 BEGIN: /usr/lib/glib-networking/ptest Running test: glib-networking/environment.test # random seed: R02S5a07189d03fbe5065c6fe4cc3727ce53 1..3 # Start of proxy tests # Start of environment tests ok 1 /proxy/environment/uri ok 2 /proxy/environment/socks ok 3 /proxy/environment/ignore # End of environment tests # End of proxy tests PASS: glib-networking/environment.test Running test: glib-networking/certificate-openssl.test # random seed: R02Sdc5a2beb36aa3b0927c2e9070d8f4fe7 # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..29 # Start of tls tests # Start of openssl tests # Start of certificate tests ok 1 /tls/openssl/certificate/create-pem ok 2 /tls/openssl/certificate/create-der ok 3 /tls/openssl/certificate/create-with-key-pem ok 4 /tls/openssl/certificate/create-with-key-der ok 5 /tls/openssl/certificate/create-with-issuer ok 6 /tls/openssl/certificate/create-with-garbage-input ok 7 /tls/openssl/certificate/pkcs11 # SKIP This backend does not support PKCS #11 ok 8 /tls/openssl/certificate/private-key ok 9 /tls/openssl/certificate/private-key-pkcs11 # SKIP This backend does not support PKCS #11 ok 10 /tls/openssl/certificate/create-chain ok 11 /tls/openssl/certificate/create-no-chain ok 12 /tls/openssl/certificate/create-list ok 13 /tls/openssl/certificate/create-list-bad ok 14 /tls/openssl/certificate/verify-good ok 15 /tls/openssl/certificate/verify-bad-identity ok 16 /tls/openssl/certificate/verify-bad-ca ok 17 /tls/openssl/certificate/verify-bad-before ok 18 /tls/openssl/certificate/verify-bad-expired ok 19 /tls/openssl/certificate/verify-bad-combo ok 20 /tls/openssl/certificate/is-same ok 21 /tls/openssl/certificate/not-valid-before ok 22 /tls/openssl/certificate/not-valid-after ok 23 /tls/openssl/certificate/subject-name ok 24 /tls/openssl/certificate/issuer-name ok 25 /tls/openssl/certificate/dns-names ok 26 /tls/openssl/certificate/ip-addresses # Start of pkcs12 tests # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ?gio-vfs? ok 27 /tls/openssl/certificate/pkcs12/basic ok 28 /tls/openssl/certificate/pkcs12/password ok 29 /tls/openssl/certificate/pkcs12/encrypted # End of pkcs12 tests # End of certificate tests # End of openssl tests # End of tls tests PASS: glib-networking/certificate-openssl.test Running test: glib-networking/file-database-openssl.test # random seed: R02S6d3c579b076061ad544fa2b1c4689913 # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..12 # Start of tls tests # Start of openssl tests # Start of backend tests ok 1 /tls/openssl/backend/default-database-is-singleton # End of backend tests # Start of database tests ok 2 /tls/openssl/database/verify-good ok 3 /tls/openssl/database/verify-bad-identity ok 4 /tls/openssl/database/verify-bad-ca ok 5 /tls/openssl/database/verify-bad-before ok 6 /tls/openssl/database/verify-bad-expired ok 7 /tls/openssl/database/verify-bad-combo ok 8 /tls/openssl/database/verify-with-incorrect-root-in-chain # End of database tests # Start of file-database tests ok 9 /tls/openssl/file-database/anchors-property ok 10 /tls/openssl/file-database/lookup-certificates-issued-by ok 11 /tls/openssl/file-database/test-handle ok 12 /tls/openssl/file-database/test-handle-invalid # End of file-database tests # End of openssl tests # End of tls tests PASS: glib-networking/file-database-openssl.test Running test: glib-networking/connection-openssl.test # random seed: R02S6ccfd9fc59235800051e5c86d8c2ecaa # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..45 # Start of tls tests # Start of openssl tests # Start of connection tests # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation dummy (GDummyProxyResolver) for ?gio-proxy-resolver? ok 1 /tls/openssl/connection/basic ok 2 /tls/openssl/connection/verified ok 3 /tls/openssl/connection/verified-chain ok 4 /tls/openssl/connection/verified-chain-with-redundant-root-cert ok 5 /tls/openssl/connection/verified-chain-with-duplicate-server-cert ok 6 /tls/openssl/connection/verified-unordered-chain ok 7 /tls/openssl/connection/verified-chain-with-alternative-ca-cert ok 8 /tls/openssl/connection/invalid-chain-with-alternative-ca-cert ok 9 /tls/openssl/connection/client-auth ok 10 /tls/openssl/connection/client-auth-rehandshake ok 11 /tls/openssl/connection/client-auth-failure # Bug Reference: http://bugzilla.gnome.org/793712 ok 12 /tls/openssl/connection/client-auth-fail-missing-client-private-key ok 13 /tls/openssl/connection/client-auth-request-cert ok 14 /tls/openssl/connection/client-auth-request-fail ok 15 /tls/openssl/connection/client-auth-request-none ok 16 /tls/openssl/connection/client-auth-pkcs11 # SKIP This backend does not support PKCS #11 ok 17 /tls/openssl/connection/no-database ok 18 /tls/openssl/connection/failed # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 19 /tls/openssl/connection/socket-client # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake failed: Unacceptable TLS certificate # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration completed (out of addresses) # GLib-GIO-DEBUG: GSocketClient: Address enumeration failed: (null) # GLib-GIO-DEBUG: GSocketClient: Connection failed: Unacceptable TLS certificate ok 20 /tls/openssl/connection/socket-client-failed # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 21 /tls/openssl/connection/read-time-out-then-write ok 22 /tls/openssl/connection/simultaneous-async ok 23 /tls/openssl/connection/simultaneous-sync ok 24 /tls/openssl/connection/simultaneous-async-rehandshake ok 25 /tls/openssl/connection/simultaneous-sync-rehandshake ok 26 /tls/openssl/connection/close-immediately # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 27 /tls/openssl/connection/unclean-close-by-server # Bug Reference: http://bugzilla.gnome.org/710691 ok 28 /tls/openssl/connection/async-implicit-handshake ok 29 /tls/openssl/connection/output-stream-close # SKIP this is not supported with openssl 1.1.1 ok 30 /tls/openssl/connection/garbage-database # Bug Reference: http://bugzilla.gnome.org/792219 ok 31 /tls/openssl/connection/readwrite-after-connection-destroyed ok 32 /tls/openssl/connection/sync-op-during-handshake ok 33 /tls/openssl/connection/socket-timeout ok 34 /tls/openssl/connection/missing-server-identity ok 35 /tls/openssl/connection/peer-certificate-notify ok 36 /tls/openssl/connection/tls-info # Start of alpn tests ok 37 /tls/openssl/connection/alpn/match ok 38 /tls/openssl/connection/alpn/no-match ok 39 /tls/openssl/connection/alpn/client-only ok 40 /tls/openssl/connection/alpn/server-only # End of alpn tests # Start of binding tests ok 41 /tls/openssl/connection/binding/match-tls-unique # SKIP tls-unique is not supported ok 42 /tls/openssl/connection/binding/match-tls-server-end-point ok 43 /tls/openssl/connection/binding/match-tls-exporter # End of binding tests # Start of oscp tests ok 44 /tls/openssl/connection/oscp/must-staple ok 45 /tls/openssl/connection/oscp/must-staple-intermediate-certificate # SKIP OCSP Must-Staple on intermediate certificates is not supported with the OpenSSL backend # End of oscp tests # End of connection tests # End of openssl tests # End of tls tests PASS: glib-networking/connection-openssl.test SUMMARY: total=4; passed=4; skipped=0; failed=0; user=0.6s; system=0.1s; maxrss=11248 DURATION: 4 END: /usr/lib/glib-networking/ptest 2023-03-28T01:33 STOP: ptest-runner TOTAL: 1 FAIL: 0 DEBUG: [Command returned '0' after 3.77 seconds] DEBUG: Command: ptest-runner -t 450 -d "/usr/lib" Status: 0 Output: START: ptest-runner 2023-03-28T01:33 BEGIN: /usr/lib/glib-networking/ptest Running test: glib-networking/environment.test # random seed: R02S5a07189d03fbe5065c6fe4cc3727ce53 1..3 # Start of proxy tests # Start of environment tests ok 1 /proxy/environment/uri ok 2 /proxy/environment/socks ok 3 /proxy/environment/ignore # End of environment tests # End of proxy tests PASS: glib-networking/environment.test Running test: glib-networking/certificate-openssl.test # random seed: R02Sdc5a2beb36aa3b0927c2e9070d8f4fe7 # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..29 # Start of tls tests # Start of openssl tests # Start of certificate tests ok 1 /tls/openssl/certificate/create-pem ok 2 /tls/openssl/certificate/create-der ok 3 /tls/openssl/certificate/create-with-key-pem ok 4 /tls/openssl/certificate/create-with-key-der ok 5 /tls/openssl/certificate/create-with-issuer ok 6 /tls/openssl/certificate/create-with-garbage-input ok 7 /tls/openssl/certificate/pkcs11 # SKIP This backend does not support PKCS #11 ok 8 /tls/openssl/certificate/private-key ok 9 /tls/openssl/certificate/private-key-pkcs11 # SKIP This backend does not support PKCS #11 ok 10 /tls/openssl/certificate/create-chain ok 11 /tls/openssl/certificate/create-no-chain ok 12 /tls/openssl/certificate/create-list ok 13 /tls/openssl/certificate/create-list-bad ok 14 /tls/openssl/certificate/verify-good ok 15 /tls/openssl/certificate/verify-bad-identity ok 16 /tls/openssl/certificate/verify-bad-ca ok 17 /tls/openssl/certificate/verify-bad-before ok 18 /tls/openssl/certificate/verify-bad-expired ok 19 /tls/openssl/certificate/verify-bad-combo ok 20 /tls/openssl/certificate/is-same ok 21 /tls/openssl/certificate/not-valid-before ok 22 /tls/openssl/certificate/not-valid-after ok 23 /tls/openssl/certificate/subject-name ok 24 /tls/openssl/certificate/issuer-name ok 25 /tls/openssl/certificate/dns-names ok 26 /tls/openssl/certificate/ip-addresses # Start of pkcs12 tests # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ?gio-vfs? ok 27 /tls/openssl/certificate/pkcs12/basic ok 28 /tls/openssl/certificate/pkcs12/password ok 29 /tls/openssl/certificate/pkcs12/encrypted # End of pkcs12 tests # End of certificate tests # End of openssl tests # End of tls tests PASS: glib-networking/certificate-openssl.test Running test: glib-networking/file-database-openssl.test # random seed: R02S6d3c579b076061ad544fa2b1c4689913 # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..12 # Start of tls tests # Start of openssl tests # Start of backend tests ok 1 /tls/openssl/backend/default-database-is-singleton # End of backend tests # Start of database tests ok 2 /tls/openssl/database/verify-good ok 3 /tls/openssl/database/verify-bad-identity ok 4 /tls/openssl/database/verify-bad-ca ok 5 /tls/openssl/database/verify-bad-before ok 6 /tls/openssl/database/verify-bad-expired ok 7 /tls/openssl/database/verify-bad-combo ok 8 /tls/openssl/database/verify-with-incorrect-root-in-chain # End of database tests # Start of file-database tests ok 9 /tls/openssl/file-database/anchors-property ok 10 /tls/openssl/file-database/lookup-certificates-issued-by ok 11 /tls/openssl/file-database/test-handle ok 12 /tls/openssl/file-database/test-handle-invalid # End of file-database tests # End of openssl tests # End of tls tests PASS: glib-networking/file-database-openssl.test Running test: glib-networking/connection-openssl.test # random seed: R02S6ccfd9fc59235800051e5c86d8c2ecaa # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation openssl (GTlsBackendOpenssl) for ?gio-tls-backend? 1..45 # Start of tls tests # Start of openssl tests # Start of connection tests # GLib-GIO-DEBUG: _g_io_module_get_default: Found default implementation dummy (GDummyProxyResolver) for ?gio-proxy-resolver? ok 1 /tls/openssl/connection/basic ok 2 /tls/openssl/connection/verified ok 3 /tls/openssl/connection/verified-chain ok 4 /tls/openssl/connection/verified-chain-with-redundant-root-cert ok 5 /tls/openssl/connection/verified-chain-with-duplicate-server-cert ok 6 /tls/openssl/connection/verified-unordered-chain ok 7 /tls/openssl/connection/verified-chain-with-alternative-ca-cert ok 8 /tls/openssl/connection/invalid-chain-with-alternative-ca-cert ok 9 /tls/openssl/connection/client-auth ok 10 /tls/openssl/connection/client-auth-rehandshake ok 11 /tls/openssl/connection/client-auth-failure # Bug Reference: http://bugzilla.gnome.org/793712 ok 12 /tls/openssl/connection/client-auth-fail-missing-client-private-key ok 13 /tls/openssl/connection/client-auth-request-cert ok 14 /tls/openssl/connection/client-auth-request-fail ok 15 /tls/openssl/connection/client-auth-request-none ok 16 /tls/openssl/connection/client-auth-pkcs11 # SKIP This backend does not support PKCS #11 ok 17 /tls/openssl/connection/no-database ok 18 /tls/openssl/connection/failed # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 19 /tls/openssl/connection/socket-client # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake failed: Unacceptable TLS certificate # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration completed (out of addresses) # GLib-GIO-DEBUG: GSocketClient: Address enumeration failed: (null) # GLib-GIO-DEBUG: GSocketClient: Connection failed: Unacceptable TLS certificate ok 20 /tls/openssl/connection/socket-client-failed # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 21 /tls/openssl/connection/read-time-out-then-write ok 22 /tls/openssl/connection/simultaneous-async ok 23 /tls/openssl/connection/simultaneous-sync ok 24 /tls/openssl/connection/simultaneous-async-rehandshake ok 25 /tls/openssl/connection/simultaneous-sync-rehandshake ok 26 /tls/openssl/connection/close-immediately # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! # GLib-GIO-DEBUG: GSocketClient: Starting new address enumeration # GLib-GIO-DEBUG: GSocketClient: Address enumeration succeeded # GLib-GIO-DEBUG: GSocketClient: Starting TCP connection attempt # GLib-GIO-DEBUG: GSocketClient: TCP connection successful # GLib-GIO-DEBUG: GSocketClient: Starting application layer connection # GLib-GIO-DEBUG: GSocketClient: Starting TLS handshake # GLib-GIO-DEBUG: GSocketClient: TLS handshake succeeded # GLib-GIO-DEBUG: GSocketClient: Connection successful! ok 27 /tls/openssl/connection/unclean-close-by-server # Bug Reference: http://bugzilla.gnome.org/710691 ok 28 /tls/openssl/connection/async-implicit-handshake ok 29 /tls/openssl/connection/output-stream-close # SKIP this is not supported with openssl 1.1.1 ok 30 /tls/openssl/connection/garbage-database # Bug Reference: http://bugzilla.gnome.org/792219 ok 31 /tls/openssl/connection/readwrite-after-connection-destroyed ok 32 /tls/openssl/connection/sync-op-during-handshake ok 33 /tls/openssl/connection/socket-timeout ok 34 /tls/openssl/connection/missing-server-identity ok 35 /tls/openssl/connection/peer-certificate-notify ok 36 /tls/openssl/connection/tls-info # Start of alpn tests ok 37 /tls/openssl/connection/alpn/match ok 38 /tls/openssl/connection/alpn/no-match ok 39 /tls/openssl/connection/alpn/client-only ok 40 /tls/openssl/connection/alpn/server-only # End of alpn tests # Start of binding tests ok 41 /tls/openssl/connection/binding/match-tls-unique # SKIP tls-unique is not supported ok 42 /tls/openssl/connection/binding/match-tls-server-end-point ok 43 /tls/openssl/connection/binding/match-tls-exporter # End of binding tests # Start of oscp tests ok 44 /tls/openssl/connection/oscp/must-staple ok 45 /tls/openssl/connection/oscp/must-staple-intermediate-certificate # SKIP OCSP Must-Staple on intermediate certificates is not supported with the OpenSSL backend # End of oscp tests # End of connection tests # End of openssl tests # End of tls tests PASS: glib-networking/connection-openssl.test SUMMARY: total=4; passed=4; skipped=0; failed=0; user=0.6s; system=0.1s; maxrss=11248 DURATION: 4 END: /usr/lib/glib-networking/ptest 2023-03-28T01:33 STOP: ptest-runner TOTAL: 1 FAIL: 0 DEBUG: [Running]$ ssh -l root -o ServerAliveCountMax=2 -o ServerAliveInterval=30 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.22 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; dmesg | grep "Killed process" DEBUG: Data from SSH call: DEBUG: [Command returned '1' after 0.14 seconds] DEBUG: Command: dmesg | grep "Killed process" Status: 1 Output: NOTE: ... unexpected success NOTE: test_ptestrunner_expectsuccess (ptest.PtestRunnerTest) DEBUG: Checking if at least one of ptest-runner is installed DEBUG: Checking if ptest is in DISTRO_FEATURES or IMAGE_FEATURES NOTE: ... skipped 'Cannot run ptests without @expectedFailure as ptests are expected to fail' Cannot run ptests without @expectedFailure as ptests are expected to fail NOTE: ---------------------------------------------------------------------- NOTE: Ran 5 tests in 10.124s NOTE: OK NOTE: (skipped=1, unexpected successes=1) DEBUG: Stopping logging thread DEBUG: Stop event received DEBUG: Tearing down logging thread DEBUG: Sending SIGTERM to runqemu Output from runqemu: runqemu - INFO - Received signal: 15 runqemu - INFO - Cleaning up runqemu - INFO - Host uptime: 177046.87 runqemu - INFO - Removing /home/pokybuild/tmp/core-image-ptest-glib-networking-qemux86-64.ext4.327025 tput: No value for $TERM and no -T specified RESULTS: RESULTS - parselogs.ParseLogsTest.test_parselogs: PASSED (4.66s) RESULTS - ping.PingTest.test_ping: PASSED (0.01s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectfail: PASSED (4.04s) RESULTS - ssh.SSHTest.test_ssh: PASSED (1.06s) RESULTS - ptest.PtestRunnerTest.test_ptestrunner_expectsuccess: SKIPPED (0.00s) SUMMARY: core-image-ptest-glib-networking () - Ran 5 tests in 10.125s core-image-ptest-glib-networking - OK - All required tests passed (successes=3, skipped=1, failures=0, errors=0) DEBUG: Python function do_testimage finished