[ 1.781804] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.781809] [drm] features: -context_init [ 1.785005] [drm] number of scanouts: 1 [ 1.785956] [drm] number of cap sets: 0 [ 1.787510] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0 [ 1.797209] virtio-pci 0000:00:06.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.830838] Console: switching to colour frame buffer device 160x50 [ 1.854453] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.857120] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.863484] brd: module loaded [ 1.864467] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 1.867157] virtio_blk virtio2: [vda] 878520 512-byte logical blocks (450 MB/429 MiB) [ 1.875469] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.876690] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 1.878640] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 1.881655] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.882815] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.884410] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 1.886290] hub 1-0:1.0: USB hub found [ 1.887254] hub 1-0:1.0: 4 ports detected [ 1.888491] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.890521] hub 2-0:1.0: USB hub found [ 1.891457] hub 2-0:1.0: 4 ports detected [ 1.893240] rtc-pl031 9010000.pl031: registered as rtc0 [ 1.894434] rtc-pl031 9010000.pl031: setting system clock to 2023-04-05T15:13:23 UTC (1680707603) [ 1.896742] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.899002] usbcore: registered new interface driver usbhid [ 1.900273] usbhid: USB HID core driver [ 1.901199] u32 classifier [ 1.901883] input device check on [ 1.902737] Actions configured [ 1.903799] NET: Registered PF_INET6 protocol family [ 1.905545] Segment Routing with IPv6 [ 1.906444] In-situ OAM (IOAM) with IPv6 [ 1.907410] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.908901] NET: Registered PF_PACKET protocol family [ 1.910312] Bridge firewalling registered [ 1.911462] Key type dns_resolver registered [ 1.912656] NET: Registered PF_VSOCK protocol family [ 1.914207] registered taskstats version 1 [ 1.915438] Key type .fscrypt registered [ 1.916352] Key type fscrypt-provisioning registered [ 1.919082] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.923308] Key type encrypted registered [ 1.927416] printk: console [netcon0] enabled [ 1.928489] netconsole: network logging started [ 1.949462] IP-Config: Complete: [ 1.950373] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.952550] host=192.168.7.4, domain=, nis-domain=(none) [ 1.953962] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.953966] nameserver0=8.8.8.8 [ 1.957065] md: Waiting for all devices to be available before autodetect [ 1.958537] md: If you don't use raid, use raid=noautodetect [ 1.959831] md: Autodetecting RAID arrays. [ 1.960766] md: autorun ... [ 1.961450] md: ... autorun DONE. [ 1.989714] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.991616] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.993783] devtmpfs: mounted [ 1.998625] Freeing unused kernel memory: 3840K [ 2.022783] Run /sbin/init as init process INIT: version 3.04 booting [ 2.141500] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.298983] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 2.301898] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 Starting udev [ 2.429458] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 2.586788] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 2.606697] udevd[137]: starting version 3.2.11 [ 2.636530] udevd[138]: starting eudev-3.2.11 [ 2.649710] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 2.889455] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2.919978] EXT4-fs (vda): re-mounted. Quota mode: disabled. Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.1+snapshot-52b8d9d055f08538ca0799566a8f828abcbcbfed qemuarm64 hvc0 qemuarm64 login: [ 19.525811] loop: module loaded [ 19.863819] loop0: detected capacity change from 0 to 20480 [ 35.898149] loop0: detected capacity change from 0 to 102400 [ 35.957219] loop1: detected capacity change from 0 to 102400 [ 36.690719] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 36.693147] scsi host0: scsi_debug: version 0191 [20210520] [ 36.693147] dev_size_mb=51, opts=0x0, submit_queues=1, statistics=0 [ 36.695927] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 36.698033] sd 0:0:0:0: Power-on or device reset occurred [ 36.707330] sd 0:0:0:0: [sda] 104448 512-byte logical blocks: (53.5 MB/51.0 MiB) [ 36.713214] sd 0:0:0:0: [sda] Write Protect is off [ 36.722655] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 36.755410] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 36.757114] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 36.795638] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.230985] sda: sda1 sda2 [ 37.449306] sda: sda1 sda2 [ 37.961592] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 38.256658] loop0: detected capacity change from 0 to 102400 [ 38.274544] loop1: detected capacity change from 0 to 102400 [ 49.414964] loop0: detected capacity change from 0 to 8 [ 58.672781] loop0: detected capacity change from 0 to 120 [ 60.143107] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 60.431653] scsi host0: scsi_debug: version 0191 [20210520] [ 60.431653] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 60.489177] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 60.504190] sd 0:0:0:0: Power-on or device reset occurred [ 60.535084] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 60.571961] sd 0:0:0:0: [sda] Write Protect is off [ 60.581245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 60.606130] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 60.607579] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 60.649346] sd 0:0:0:0: [sda] Attached SCSI disk [ 61.921952] sd 0:0:0:0: [sda] Spinning up disk... [ 62.957491] .ready [ 63.061660] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 63.341712] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 63.344095] scsi host0: scsi_debug: version 0191 [20210520] [ 63.344095] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 63.360043] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 63.362504] sd 0:0:0:0: Power-on or device reset occurred [ 63.388005] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 63.406892] sd 0:0:0:0: [sda] Write Protect is off [ 63.416403] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 63.430708] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 63.432237] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 63.486385] sd 0:0:0:0: [sda] Attached SCSI disk [ 64.435609] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 64.450582] EXT4-fs (sda): mounted filesystem without journal. Quota mode: disabled. [ 64.532692] EXT4-fs (sda): unmounting filesystem. [ 65.556707] sd 0:0:0:0: [sda] Spinning up disk... [ 66.569477] .ready [ 66.685615] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 66.972589] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 66.991641] scsi host0: scsi_debug: version 0191 [20210520] [ 66.991641] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 66.999019] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 67.001166] sd 0:0:0:0: Power-on or device reset occurred [ 67.010549] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 67.016385] sd 0:0:0:0: [sda] Write Protect is off [ 67.025874] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 67.040185] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 67.041855] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 67.082213] sd 0:0:0:0: [sda] Attached SCSI disk [ 67.617543] sda: sda1 sda2 [ 68.609903] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 68.633669] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 68.728114] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 68.743060] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 68.807020] EXT4-fs (sda2): unmounting filesystem. [ 68.864318] EXT4-fs (sda1): unmounting filesystem. [ 69.887297] sd 0:0:0:0: [sda] Spinning up disk... [ 70.921457] .ready [ 70.960089] sda: sda1 sda2 [ 71.053596] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 71.386068] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 71.388564] scsi host0: scsi_debug: version 0191 [20210520] [ 71.388564] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 71.391761] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 71.393901] sd 0:0:0:0: Power-on or device reset occurred [ 71.403269] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 71.408979] sd 0:0:0:0: [sda] Write Protect is off [ 71.418324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 71.432436] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 71.433964] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 71.472764] sd 0:0:0:0: [sda] Attached SCSI disk [ 71.868574] sda: sda1 sda2 [ 73.774597] sd 0:0:0:0: [sda] Spinning up disk... [ 74.793467] .ready [ 74.831776] sda: sda1 sda2 [ 74.897601] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 75.130546] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 75.132879] scsi host0: scsi_debug: version 0191 [20210520] [ 75.132879] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 75.135877] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 75.137980] sd 0:0:0:0: Power-on or device reset occurred [ 75.161627] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 75.167726] sd 0:0:0:0: [sda] Write Protect is off [ 75.177238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 75.191631] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 75.193161] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 75.232260] sd 0:0:0:0: [sda] Attached SCSI disk [ 75.665128] sda: sda1 sda2 [ 76.668623] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 76.683997] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 76.779287] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 76.794234] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 76.858035] EXT4-fs (sda2): unmounting filesystem. [ 76.915512] EXT4-fs (sda1): unmounting filesystem. [ 77.938371] sd 0:0:0:0: [sda] Spinning up disk... [ 78.957459] .ready [ 78.995900] sda: sda1 sda2 [ 79.089645] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 80.113423] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 80.116007] scsi host0: scsi_debug: version 0191 [20210520] [ 80.116007] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 80.119475] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 80.121757] sd 0:0:0:0: Power-on or device reset occurred [ 80.166950] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 80.168645] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 80.198409] sd 0:0:0:0: [sda] Write Protect is off [ 80.207844] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 80.222080] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 80.230912] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 80.269958] sd 0:0:0:0: [sda] Attached SCSI disk [ 81.413150] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 81.553620] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 81.863198] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 81.865766] scsi host0: scsi_debug: version 0191 [20210520] [ 81.865766] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 81.868776] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 81.871310] sd 0:0:0:0: Power-on or device reset occurred [ 81.880797] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 81.882444] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 81.884046] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 81.902197] sd 0:0:0:0: [sda] Write Protect is off [ 81.911735] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 81.926033] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 81.927689] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 81.966755] sd 0:0:0:0: [sda] Attached SCSI disk [ 82.950730] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 83.097582] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 83.439426] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 83.442038] scsi host0: scsi_debug: version 0191 [20210520] [ 83.442038] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 83.445005] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 83.447369] sd 0:0:0:0: Power-on or device reset occurred [ 83.456779] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 83.458616] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 83.463919] sd 0:0:0:0: [sda] Write Protect is off [ 83.473320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 83.487563] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 83.489067] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 83.528182] sd 0:0:0:0: [sda] Attached SCSI disk [ 83.973734] sda: sda1 sda2 [ 84.305559] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 84.501735] loop0: detected capacity change from 0 to 102400 [ 84.815779] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 84.818236] scsi host0: scsi_debug: version 0191 [20210520] [ 84.818236] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 84.821286] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 84.823552] sd 0:0:0:0: Power-on or device reset occurred [ 84.832999] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 84.838967] sd 0:0:0:0: [sda] Write Protect is off [ 84.848354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 84.862614] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 84.864108] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 84.902928] sd 0:0:0:0: [sda] Attached SCSI disk [ 85.852218] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 85.981562] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 87.457449] loop0: detected capacity change from 0 to 20480 [ 87.615896] loop0: detected capacity change from 20480 to 40960 [ 94.591349] loop0: detected capacity change from 0 to 10240 [ 94.653773] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 94.658146] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 94.681012] EXT4-fs (loop0): unmounting filesystem. [ 96.476055] NET: Registered PF_ALG protocol family [ 102.734634] loop0: detected capacity change from 0 to 20480 [ 103.258433] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.262693] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 103.341605] EXT4-fs (loop0): unmounting filesystem. [ 103.529844] loop0: detected capacity change from 0 to 20480 [ 103.533590] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.537224] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 103.544323] EXT4-fs (loop0): unmounting filesystem. [ 103.601641] loop0: detected capacity change from 0 to 20480 [ 103.610006] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.613781] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 103.626650] EXT4-fs (loop0): unmounting filesystem. [ 103.712771] loop0: detected capacity change from 0 to 20480 [ 103.716605] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.720152] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 103.733364] EXT4-fs (loop0): unmounting filesystem. [ 103.784099] loop0: detected capacity change from 0 to 20480 [ 103.793833] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.797549] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 103.810691] EXT4-fs (loop0): unmounting filesystem. [ 103.894617] loop0: detected capacity change from 0 to 20478 [ 104.000039] loop0: detected capacity change from 0 to 20480 [ 104.213744] loop0: detected capacity change from 0 to 20480 [ 104.811366] loop0: detected capacity change from 0 to 20480 [ 104.867166] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.879701] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 104.890343] EXT4-fs (loop0): unmounting filesystem. [ 104.897242] loop0: detected capacity change from 0 to 10240 [ 104.900617] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.904241] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 104.910682] loop1: detected capacity change from 0 to 10240 [ 104.913698] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem [ 104.917043] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: disabled. [ 104.924128] EXT4-fs (loop0): unmounting filesystem. [ 104.932531] EXT4-fs (loop1): unmounting filesystem. [ 104.940958] loop0: detected capacity change from 0 to 10240 [ 113.470374] loop0: detected capacity change from 0 to 20480 [ 113.550977] loop0: detected capacity change from 0 to 18432 [ 113.607978] loop0: detected capacity change from 0 to 6144 [ 113.679524] loop0: detected capacity change from 0 to 6144 [ 113.975625] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 113.991533] scsi host0: scsi_debug: version 0191 [20210520] [ 113.991533] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 114.007616] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 114.009801] sd 0:0:0:0: Power-on or device reset occurred [ 114.019235] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 114.025153] sd 0:0:0:0: [sda] Write Protect is off [ 114.034547] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 114.052252] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 114.053883] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 114.092704] sd 0:0:0:0: [sda] Attached SCSI disk [ 114.121380] loop0: detected capacity change from 0 to 22528 [ 114.192600] loop0: detected capacity change from 0 to 20480 [ 114.263527] loop0: detected capacity change from 0 to 6144 [ 114.343730] loop0: detected capacity change from 0 to 6144 [ 114.485544] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 114.767457] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 114.783137] scsi host0: scsi_debug: version 0191 [20210520] [ 114.783137] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 114.786297] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 114.788430] sd 0:0:0:0: Power-on or device reset occurred [ 114.797871] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 114.803812] sd 0:0:0:0: [sda] Write Protect is off [ 114.819577] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 114.833850] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 114.835413] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 114.874090] sd 0:0:0:0: [sda] Attached SCSI disk [ 114.902703] loop0: detected capacity change from 0 to 22528 [ 114.945144] loop0: detected capacity change from 0 to 22528 [ 115.019321] loop0: detected capacity change from 0 to 22528 [ 115.117461] loop0: detected capacity change from 0 to 2048 [ 115.122764] loop1: detected capacity change from 0 to 2048 [ 115.228622] loop0: detected capacity change from 0 to 4096 [ 115.337784] loop0: detected capacity change from 0 to 20480 [ 115.421401] loop0: detected capacity change from 0 to 22528 [ 115.496142] loop0: detected capacity change from 0 to 2048 [ 115.501499] loop1: detected capacity change from 0 to 18432 [ 115.581554] loop0: detected capacity change from 0 to 22528 [ 115.659846] loop0: detected capacity change from 0 to 22528 [ 115.785556] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 122.105683] loop0: detected capacity change from 0 to 10240 [ 131.949032] loop0: detected capacity change from 0 to 10240 [ 132.160042] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.164545] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.191777] EXT4-fs (loop0): unmounting filesystem. [ 132.764300] loop0: detected capacity change from 0 to 10240 [ 132.793548] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.797273] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.816733] EXT4-fs (loop0): unmounting filesystem. [ 132.864791] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.868651] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.882090] EXT4-fs (loop0): unmounting filesystem. [ 132.948471] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.952289] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.977558] EXT4-fs (loop0): unmounting filesystem. [ 133.011047] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.015554] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 133.028470] EXT4-fs (loop0): unmounting filesystem. [ 133.409323] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 133.456692] scsi host0: scsi_debug: version 0191 [20210520] [ 133.456692] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 133.461261] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 133.463610] sd 0:0:0:0: Power-on or device reset occurred [ 133.473246] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 133.509082] sd 0:0:0:0: [sda] Write Protect is off [ 133.518759] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 133.532961] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 133.534553] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 133.576290] sd 0:0:0:0: [sda] Attached SCSI disk [ 134.512822] sda: sda1 sda2 sda3 sda4 [ 135.482711] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 135.497435] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 135.503630] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 135.518120] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 135.524306] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 135.534653] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 135.687692] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 135.751395] EXT4-fs (sda1): unmounting filesystem. [ 135.805327] EXT4-fs (sda2): unmounting filesystem. [ 135.811247] EXT4-fs (sda3): unmounting filesystem. [ 135.861016] EXT4-fs (sda4): unmounting filesystem. [ 136.098791] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 136.169874] EXT4-fs (sda4): unmounting filesystem. [ 136.274181] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 136.289062] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 136.295296] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 136.309661] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 136.315994] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 136.326312] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 136.391000] EXT4-fs (sda1): unmounting filesystem. [ 136.445131] EXT4-fs (sda2): unmounting filesystem. [ 136.451026] EXT4-fs (sda3): unmounting filesystem. [ 136.495102] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 136.505470] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 136.517573] EXT4-fs (sda3): unmounting filesystem. [ 136.551798] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 136.562184] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 136.568237] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 136.578610] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 136.584729] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 136.594970] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 136.743867] EXT4-fs (sda4): orphan cleanup on readonly fs [ 136.745389] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 136.754787] EXT4-fs (sda1): unmounting filesystem. [ 136.756306] EXT4-fs (sda2): unmounting filesystem. [ 136.757602] EXT4-fs (sda3): unmounting filesystem. [ 136.759027] EXT4-fs (sda4): unmounting filesystem. [ 136.796509] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 136.811061] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 136.817225] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 136.831607] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 136.837900] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 136.852153] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 137.006840] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 137.064943] EXT4-fs (sda1): unmounting filesystem. [ 137.119082] EXT4-fs (sda2): unmounting filesystem. [ 137.172960] EXT4-fs (sda3): unmounting filesystem. [ 137.226743] EXT4-fs (sda4): unmounting filesystem. [ 137.353577] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 138.027971] loop0: detected capacity change from 0 to 102400 [ 138.190962] BTRFS: device fsid 6294a950-7e39-4584-87b8-fa454b4a84e7 devid 1 transid 6 /dev/loop0 scanned by mkfs.btrfs (21009) [ 138.233149] loop1: detected capacity change from 0 to 102400 [ 138.237756] BTRFS info (device loop1): using crc32c (crc32c-generic) checksum algorithm [ 138.239621] BTRFS info (device loop1): using free space tree [ 138.243477] BTRFS info (device loop1): enabling ssd optimizations [ 138.244928] BTRFS info (device loop1): checking UUID tree [ 138.294165] BTRFS info (device loop1): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 138.356292] BTRFS: device fsid 6294a950-7e39-4584-87b8-fa454b4a84e7 devid 1 transid 11 /dev/loop0 scanned by mount (21055) [ 138.359463] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm [ 138.361175] BTRFS info (device loop0): using free space tree [ 138.473711] BTRFS: device fsid 6294a950-7e39-4584-87b8-fa454b4a84e7 devid 1 transid 12 /dev/loop0 scanned by mount (21099) [ 138.476806] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm [ 138.478699] BTRFS info (device loop0): using free space tree [ 138.725595] loop0: detected capacity change from 0 to 10240 [ 138.785293] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 138.789605] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 138.804596] EXT4-fs (loop0): unmounting filesystem. [ 138.843752] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 138.847331] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 138.864462] EXT4-fs (loop0): unmounting filesystem. [ 139.065335] loop0: detected capacity change from 0 to 10240 [ 139.112033] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.115822] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 139.134610] EXT4-fs (loop0): unmounting filesystem. [ 139.334231] loop0: detected capacity change from 0 to 10240 [ 139.380440] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.384256] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 139.400819] EXT4-fs (loop0): unmounting filesystem. [ 139.578005] loop0: detected capacity change from 0 to 10240 [ 139.644471] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.648634] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 139.665394] EXT4-fs (loop0): unmounting filesystem. [ 139.696500] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.700164] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 139.713551] EXT4-fs (loop0): unmounting filesystem. [ 139.743865] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.747663] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 139.760737] EXT4-fs (loop0): unmounting filesystem. [ 139.926098] loop0: detected capacity change from 0 to 10240 [ 139.983698] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 139.987410] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 140.000459] EXT4-fs (loop0): unmounting filesystem. [ 140.031118] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 140.034803] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 140.048069] EXT4-fs (loop0): unmounting filesystem. [ 140.267652] loop0: detected capacity change from 0 to 10240 [ 140.355920] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 140.359820] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 140.380425] EXT4-fs (loop0): unmounting filesystem. [ 140.471015] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 140.757005] loop0: detected capacity change from 0 to 10240 [ 140.759143] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 141.101863] loop0: detected capacity change from 0 to 10240 [ 141.159011] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 141.685267] loop0: detected capacity change from 0 to 10240 [ 141.761346] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 141.818260] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 141.861992] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.099302] loop0: detected capacity change from 0 to 10240 [ 142.155209] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.203622] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.404497] loop0: detected capacity change from 0 to 10240 [ 142.472048] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.517181] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.739259] loop0: detected capacity change from 0 to 10240 [ 142.804528] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 142.858717] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 143.275043] loop0: detected capacity change from 0 to 10240 [ 143.278626] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 143.435923] loop0: detected capacity change from 0 to 10240 [ 143.853213] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 143.873121] EXT4-fs (loop0): re-mounted. Quota mode: disabled. [ 144.467292] loop0: detected capacity change from 0 to 10240 [ 144.504030] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 144.562428] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 145.171436] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 145.193993] scsi host0: scsi_debug: version 0191 [20210520] [ 145.193993] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 145.214383] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 145.223396] sd 0:0:0:0: Power-on or device reset occurred [ 145.253542] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 145.273667] sd 0:0:0:0: [sda] Write Protect is off [ 145.283039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 145.297237] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 145.298749] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 145.337485] sd 0:0:0:0: [sda] Attached SCSI disk [ 146.187618] sda: sda1 sda2 sda3 sda4 [ 147.180997] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 147.520116] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 147.821550] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 148.040411] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 148.159443] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 148.264236] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 148.637679] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 149.148420] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 149.150800] scsi host0: scsi_debug: version 0191 [20210520] [ 149.150800] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 149.192167] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 149.194514] sd 0:0:0:0: Power-on or device reset occurred [ 149.225135] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 149.231072] sd 0:0:0:0: [sda] Write Protect is off [ 149.240550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 149.254824] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 149.256351] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 149.299142] sd 0:0:0:0: [sda] Attached SCSI disk [ 149.975311] sda: sda1 sda2 sda3 sda4 [ 150.929196] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 151.054541] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 151.176052] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 151.275990] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 151.577556] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 151.808141] loop0: detected capacity change from 0 to 10240 [ 151.852299] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 151.900235] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 152.317704] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 152.321126] scsi host0: scsi_debug: version 0191 [20210520] [ 152.321126] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 152.356196] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 152.358387] sd 0:0:0:0: Power-on or device reset occurred [ 152.367662] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 152.394219] sd 0:0:0:0: [sda] Write Protect is off [ 152.403651] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 152.417807] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 152.419270] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 152.457823] sd 0:0:0:0: [sda] Attached SCSI disk [ 153.281673] sda: sda1 sda2 sda3 [ 153.853549] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 187.422049] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 187.449110] scsi host0: scsi_debug: version 0191 [20210520] [ 187.449110] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 187.452319] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 187.454511] sd 0:0:0:0: Power-on or device reset occurred [ 187.463869] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 187.465634] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 187.470792] sd 0:0:0:0: [sda] Write Protect is off [ 187.480086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 187.494211] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 187.495692] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 187.533961] sd 0:0:0:0: [sda] Attached SCSI disk [ 188.567207] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 189.101660] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 190.850673] sda: sda1 sda2 sda3 [ 191.950708] sda: sda1 [ 194.194161] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 195.794047] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 196.919657] sda: sda1 [ 197.417241] sda: sda1 [ 198.676197] sda: sda1 sda2 < > [ 199.160537] sda: sda1 sda2 < > [ 200.308810] sda: sda1 sda2 < > [ 200.789794] sda: sda1 sda2 < > [ 202.159302] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 202.646316] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 204.014945] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 204.507993] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 205.616732] sda: sda1 [ 206.857666] sda: sda1 sda3 [ 208.099931] sda: sda1 sda2 [ 209.578086] sda: sda1 sda2 sda3 sda4 [ 210.860253] sda: sda1 sda2 sda3 [ 211.053581] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 211.411293] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 211.427515] scsi host0: scsi_debug: version 0191 [20210520] [ 211.427515] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 211.457774] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 211.460174] sd 0:0:0:0: Power-on or device reset occurred [ 211.469704] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 211.471401] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 211.504435] sd 0:0:0:0: [sda] Write Protect is off [ 211.513845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 211.527948] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 211.529470] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 211.568152] sd 0:0:0:0: [sda] Attached SCSI disk [ 212.970442] sda: sda1 sda2 sda3 sda4 [ 214.836373] sda: sda1 sda2 sda3 sda4 [ 216.851460] sda: sda1 sda2 sda3 sda4 [ 216.993604] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 217.267625] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 217.269996] scsi host0: scsi_debug: version 0191 [20210520] [ 217.269996] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 217.286007] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 217.288186] sd 0:0:0:0: Power-on or device reset occurred [ 217.297551] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 217.299210] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 217.304319] sd 0:0:0:0: [sda] Write Protect is off [ 217.313540] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 217.327686] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 217.329088] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 217.367579] sd 0:0:0:0: [sda] Attached SCSI disk [ 218.737946] sda: sda1 sda2 sda3 sda4 sda5 [ 219.521766] sda: sda1 sda2 sda3 sda4 sda5 [ 220.274700] sda: sda1 sda2 sda3 sda4 sda5 [ 220.998316] sda: sda1 sda2 sda3 sda4 sda5 [ 221.721980] sda: sda1 sda2 sda3 sda4 sda5 [ 222.443923] sda: sda1 sda2 sda3 sda4 sda5 [ 223.334507] sda: sda1 sda2 sda3 sda4 sda5 [ 224.234953] sda: sda1 sda2 sda3 sda4 sda5 [ 225.135550] sda: sda1 sda2 sda3 sda4 sda5 [ 226.622601] sda: sda1 sda2 sda3 sda4 sda5 [ 227.690393] sda: sda1 sda2 sda3 sda4 sda5 [ 228.815630] sda: sda1 sda2 sda3 sda4 sda5 [ 231.409592] sda: sda1 sda2 sda3 sda4 [ 233.313732] sda: sda1 [ 234.044910] sda: sda1 [ 235.906064] sda: sda1 sda2 sda3 sda4 [ 236.640519] sda: sda1 sda2 sda3 sda4 [ 237.505526] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 237.842213] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 237.858145] scsi host0: scsi_debug: version 0191 [20210520] [ 237.858145] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 237.874645] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 237.876676] sd 0:0:0:0: Power-on or device reset occurred [ 237.907109] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 237.925815] sd 0:0:0:0: [sda] Write Protect is off [ 237.935069] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 237.962467] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 237.964007] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 238.002460] sd 0:0:0:0: [sda] Attached SCSI disk [ 238.581055] sda: sda1 [ 239.608986] sda: sda1 [ 240.274149] sda: sda1 [ 240.964100] sda: sda1 [ 241.225594] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 241.603555] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 241.605902] scsi host0: scsi_debug: version 0191 [20210520] [ 241.605902] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 241.631821] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 241.633988] sd 0:0:0:0: Power-on or device reset occurred [ 241.662342] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 241.668042] sd 0:0:0:0: [sda] Write Protect is off [ 241.677240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 241.691213] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 241.692742] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 241.731085] sd 0:0:0:0: [sda] Attached SCSI disk [ 242.452541] sda: sda1 [ 242.952907] sda: sda1 [ 243.472738] sda: sda1 [ 244.046425] sda: sda1 [ 244.571331] sda: sda1 [ 245.106003] sda: sda1 [ 245.637730] sda: sda1 [ 246.195050] sda: sda1 [ 246.727608] sda: sda1 [ 247.256299] sda: sda1 [ 247.782014] sda: sda1 [ 248.296458] sda: sda1 [ 248.814797] sda: sda1 [ 249.457322] sda: sda1 sda2 [ 250.082834] sda: sda1 sda2 sda3 [ 250.579492] sda: sda1 sda2 sda3 [ 251.107071] sda: sda1 sda2 sda3 [ 252.514231] sda: sda1 [ 253.307854] sda: sda1 [ 254.084299] sda: sda1 [ 254.866371] sda: sda1 [ 255.638090] sda: sda1 [ 256.408098] sda: sda1 [ 257.214240] sda: sda1 [ 257.992116] sda: sda1 [ 258.765586] sda: sda1 [ 259.540230] sda: sda1 [ 260.322973] sda: sda1 [ 261.092915] sda: sda1 [ 261.871590] sda: sda1 [ 262.772838] sda: sda1 sda2 [ 263.634203] sda: sda1 sda2 sda3 [ 264.391593] sda: sda1 sda2 sda3 [ 265.298046] sda: sda1 sda2 sda3 [ 266.802165] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 267.310887] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 267.489605] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 267.797511] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 267.799685] scsi host0: scsi_debug: version 0191 [20210520] [ 267.799685] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 267.830510] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 267.832852] sd 0:0:0:0: Power-on or device reset occurred [ 267.868226] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 267.870051] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 267.875275] sd 0:0:0:0: [sda] Write Protect is off [ 267.884535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 267.898766] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 267.900215] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 267.938748] sd 0:0:0:0: [sda] Attached SCSI disk [ 269.284662] sda: sda1 sda2 sda3 sda4 [ 271.125587] sda: sda1 sda2 sda3 sda4 [ 272.959889] sda: sda1 sda2 sda3 sda4 [ 275.001539] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 275.266290] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 275.275617] scsi host0: scsi_debug: version 0191 [20210520] [ 275.275617] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 275.292335] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 275.294668] sd 0:0:0:0: Power-on or device reset occurred [ 275.304180] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 275.306323] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 275.311702] sd 0:0:0:0: [sda] Write Protect is off [ 275.321374] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 275.335627] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 275.337256] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 275.377054] sd 0:0:0:0: [sda] Attached SCSI disk [ 280.238913] sda: sda1 [ 281.857653] sda: sda1 [ 282.181565] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 282.559918] loop0: detected capacity change from 0 to 10240 [ 282.580076] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 282.847685] loop0: detected capacity change from 0 to 10240 [ 282.899448] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 283.117305] loop0: detected capacity change from 0 to 10240 [ 283.151804] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 283.320106] loop0: detected capacity change from 0 to 10240 [ 283.354679] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 283.543094] loop0: detected capacity change from 0 to 10240 [ 283.578974] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 286.602076] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 286.604414] scsi host0: scsi_debug: version 0191 [20210520] [ 286.604414] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 286.607460] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 286.609651] sd 0:0:0:0: Power-on or device reset occurred [ 286.618973] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 286.624661] sd 0:0:0:0: [sda] Write Protect is off [ 286.634039] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 286.661680] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 286.663225] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 286.701845] sda: sda1 sda2 [ 286.703118] sd 0:0:0:0: [sda] Attached SCSI disk [ 287.769552] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 288.236451] udevd[29540]: starting version 3.2.11 [ 288.242190] udevd[29541]: starting eudev-3.2.11