[    0.000000] Linux version 5.19.17-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 463761529 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000006] tsc: Detected 2299.994 MHz processor
[    0.001152] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001188] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006089] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.006221] ACPI: Early table checksum verification disabled
[    0.006224] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.006238] ACPI: RSDT 0x000000001FFE2403 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006244] ACPI: FACP 0x000000001FFE21E3 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006249] ACPI: DSDT 0x000000001FFE0040 0021A3 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006253] ACPI: FACS 0x000000001FFE0000 000040
[    0.006256] ACPI: APIC 0x000000001FFE22D7 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006259] ACPI: HPET 0x000000001FFE2367 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006262] ACPI: MCFG 0x000000001FFE239F 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006265] ACPI: WAET 0x000000001FFE23DB 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006267] ACPI: Reserving FACP table memory at [mem 0x1ffe21e3-0x1ffe22d6]
[    0.006269] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe21e2]
[    0.006270] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.006271] ACPI: Reserving APIC table memory at [mem 0x1ffe22d7-0x1ffe2366]
[    0.006272] ACPI: Reserving HPET table memory at [mem 0x1ffe2367-0x1ffe239e]
[    0.006272] ACPI: Reserving MCFG table memory at [mem 0x1ffe239f-0x1ffe23da]
[    0.006273] ACPI: Reserving WAET table memory at [mem 0x1ffe23db-0x1ffe2402]
[    0.006327] Zone ranges:
[    0.006328]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006330]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.006332]   Normal   empty
[    0.006333] Movable zone start for each node
[    0.006334] Early memory node ranges
[    0.006334]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006336]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.006338] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.006728] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006747] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.008457] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.008832] ACPI: PM-Timer IO Port: 0x608
[    0.008842] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.008870] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.008873] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.008876] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.008877] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.008879] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.008880] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.008884] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.008885] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.008889] TSC deadline timer available
[    0.008891] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.008911] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.008912] Booting paravirtualized kernel on KVM
[    0.008914] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.008919] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.009454] percpu: Embedded 53 pages/cpu s180200 r8192 d28696 u524288
[    0.009488] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.009490] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.009623] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.009663] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.010192] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.011742] Memory: 482200K/523736K available (16395K kernel code, 2208K rwdata, 3732K rodata, 1936K init, 1832K bss, 41276K reserved, 0K cma-reserved)
[    0.011790] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.011797] Kernel/User page tables isolation: enabled
[    0.011808] ftrace: allocating 47075 entries in 184 pages
[    0.021129] ftrace: allocated 184 pages with 4 groups
[    0.021191] Dynamic Preempt: full
[    0.021610] rcu: Preemptible hierarchical RCU implementation.
[    0.021610] rcu: 	RCU event tracing is enabled.
[    0.021611] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.021613] 	All grace periods are expedited (rcu_expedited).
[    0.021613] 	Trampoline variant of Tasks RCU enabled.
[    0.021614] 	Rude variant of Tasks RCU enabled.
[    0.021614] 	Tracing variant of Tasks RCU enabled.
[    0.021615] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.021616] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.026746] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.026927] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.027015] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.027026] random: crng init done
[    0.030852] Console: colour VGA+ 80x25
[    0.090503] printk: console [ttyS0] enabled
[    0.090859] ACPI: Core revision 20220331
[    0.091326] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.092192] APIC: Switch to symmetric I/O mode setup
[    0.092771] x2apic enabled
[    0.093170] Switched APIC routing to physical x2apic.
[    0.094335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.094897] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21272f7f9fd, max_idle_ns: 440795288986 ns
[    0.096729] Calibrating delay loop (skipped) preset value.. 4599.98 BogoMIPS (lpj=2299994)
[    0.097730] pid_max: default: 32768 minimum: 301
[    0.098139] LSM: Security Framework initializing
[    0.098738] landlock: Up and running.
[    0.099493] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.099732] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.101001] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.101472] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.101733] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.102731] Spectre V2 : Mitigation: Retpolines
[    0.103135] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.103730] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.104308] Speculative Store Bypass: Vulnerable
[    0.104731] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.105288] MMIO Stale Data: Unknown: No mitigations
[    0.105730] SRBDS: Unknown: Dependent on hypervisor status
[    0.124216] Freeing SMP alternatives memory: 52K
[    0.124794] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.125729] cblist_init_generic: Setting adjustable number of callback queues.
[    0.125733] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.126293] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.126753] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.127285] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.127773] rcu: Hierarchical SRCU implementation.
[    0.128216] rcu: 	Max phase no-delay instances is 400.
[    0.128931] smp: Bringing up secondary CPUs ...
[    0.129469] x86: Booting SMP configuration:
[    0.129733] .... node  #0, CPUs:      #1 #2 #3
[    0.130027] smp: Brought up 1 node, 4 CPUs
[    0.131094] smpboot: Max logical packages: 1
[    0.131461] smpboot: Total of 4 processors activated (18399.95 BogoMIPS)
[    0.131960] devtmpfs: initialized
[    0.132180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.132735] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.133355] pinctrl core: initialized pinctrl subsystem
[    0.134407] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.134875] thermal_sys: Registered thermal governor 'step_wise'
[    0.134877] thermal_sys: Registered thermal governor 'user_space'
[    0.135451] cpuidle: using governor menu
[    0.136160] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.136738] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.137376] PCI: Using configuration type 1 for base access
[    0.139244] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.156732] raid6: sse2x4   gen() 13176 MB/s
[    0.173731] raid6: sse2x2   gen() 13510 MB/s
[    0.190731] raid6: sse2x1   gen() 10182 MB/s
[    0.191127] raid6: using algorithm sse2x2 gen() 13510 MB/s
[    0.207730] raid6: .... xor() 8320 MB/s, rmw enabled
[    0.208179] raid6: using ssse3x2 recovery algorithm
[    0.208661] ACPI: Added _OSI(Module Device)
[    0.208732] ACPI: Added _OSI(Processor Device)
[    0.209110] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.209542] ACPI: Added _OSI(Processor Aggregator Device)
[    0.209732] ACPI: Added _OSI(Linux-Dell-Video)
[    0.210114] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.210580] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.211696] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.212919] ACPI: Interpreter enabled
[    0.213272] ACPI: PM: (supports S0 S3 S5)
[    0.213608] ACPI: Using IOAPIC for interrupt routing
[    0.213767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.214569] PCI: Using E820 reservations for host bridge windows
[    0.214834] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.217129] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.217737] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.218542] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.218799] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.219438] PCI host bridge to bus 0000:00
[    0.219733] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.220357] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.220732] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.221405] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.221732] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.222385] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.222733] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.223253] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.224123] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.225733] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.227515] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.230733] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.233309] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.234238] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.235562] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.238543] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.240077] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.242737] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.247741] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.250737] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.255738] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.256460] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.257232] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.260737] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.262735] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.267743] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.271289] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.273722] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.274654] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.277089] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.278422] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.280688] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.281791] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.282733] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.286231] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.287040] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.287923] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.291732] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.292732] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.295003] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.297312] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.298928] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.299537] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.299801] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.300394] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.300798] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.301384] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.301796] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.302379] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.302757] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.303275] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.303744] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.304265] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.304738] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.305255] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.305739] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.306251] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.307045] SCSI subsystem initialized
[    0.307410] ACPI: bus type USB registered
[    0.307751] usbcore: registered new interface driver usbfs
[    0.308230] usbcore: registered new interface driver hub
[    0.308695] usbcore: registered new device driver usb
[    0.308746] pps_core: LinuxPPS API ver. 1 registered
[    0.309172] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.309733] PTP clock support registered
[    0.310085] Bluetooth: Core ver 2.22
[    0.310266] NET: Registered PF_BLUETOOTH protocol family
[    0.310733] Bluetooth: HCI device and connection manager initialized
[    0.311356] Bluetooth: HCI socket layer initialized
[    0.311733] Bluetooth: L2CAP socket layer initialized
[    0.312176] Bluetooth: SCO socket layer initialized
[    0.312623] PCI: Using ACPI for IRQ routing
[    0.353659] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.353659] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.353729] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.353735] vgaarb: loaded
[    0.354021] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.354437] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.359834] clocksource: Switched to clocksource kvm-clock
[    0.360581] pnp: PnP ACPI init
[    0.360983] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.361838] pnp: PnP ACPI: found 6 devices
[    0.368743] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.369572] NET: Registered PF_INET protocol family
[    0.370435] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.371383] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.372142] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.372828] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.373503] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.374221] TCP: Hash tables configured (established 4096 bind 4096)
[    0.374795] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.375369] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.376005] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.376698] RPC: Registered named UNIX socket transport module.
[    0.377240] RPC: Registered udp transport module.
[    0.378581] RPC: Registered tcp transport module.
[    0.378989] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.379548] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.380073] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.380583] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.381161] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.381745] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.382316] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.383223] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.384499] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.385695] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.386864] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.388004] PCI: CLS 0 bytes, default 64
[    0.388529] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.389267] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21272f7f9fd, max_idle_ns: 440795288986 ns
[    0.390838] Initialise system trusted keyrings
[    0.391315] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.393389] NFS: Registering the id_resolver key type
[    0.393854] Key type id_resolver registered
[    0.394219] Key type id_legacy registered
[    0.394919] Key type cifs.idmap registered
[    0.406336] xor: automatically using best checksumming function   avx       
[    0.406992] Key type asymmetric registered
[    0.407346] Asymmetric key parser 'x509' registered
[    0.408778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.409439] io scheduler mq-deadline registered
[    0.409843] io scheduler kyber registered
[    0.410670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.414811] ACPI: button: Power Button [PWRF]
[    0.415887] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.417427] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.418872] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.420328] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.423443] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.424110] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.424930] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.425758] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.427140] Linux agpgart interface v0.103
[    0.427660] ACPI: bus type drm_connector registered
[    0.428206] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.428698] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.436109] Console: switching to colour dummy device 80x25
[    0.436751] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.436753] [drm] features: -context_init
[    0.439144] [drm] number of scanouts: 1
[    0.439504] [drm] number of cap sets: 0
[    0.440201] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.443739] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.461273] Console: switching to colour frame buffer device 160x50
[    0.474200] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.476929] brd: module loaded
[    0.478465] loop: module loaded
[    0.478868] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.480379] virtio_blk virtio3: [vda] 911322 512-byte logical blocks (467 MB/445 MiB)
[    0.517042] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.517813] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.519079] scsi host0: ahci
[    0.519580] scsi host1: ahci
[    0.520061] scsi host2: ahci
[    0.520504] scsi host3: ahci
[    0.520955] scsi host4: ahci
[    0.521467] scsi host5: ahci
[    0.521838] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.522471] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.523140] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.523770] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.524405] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.525038] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.526757] e100: Intel(R) PRO/100 Network Driver
[    0.527228] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.527699] e1000: Intel(R) PRO/1000 Network Driver
[    0.528118] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.528613] e1000e: Intel(R) PRO/1000 Network Driver
[    0.529046] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.529552] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.530018] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.530495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.531067] ehci-pci: EHCI PCI platform driver
[    0.532132] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.532592] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.533361] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.540825] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541585] hub 1-0:1.0: USB hub found
[    0.541952] hub 1-0:1.0: 6 ports detected
[    0.542486] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.543046] ohci-pci: OHCI PCI platform driver
[    0.543440] uhci_hcd: USB Universal Host Controller Interface driver
[    0.544701] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.545163] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.545890] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.546598] hub 2-0:1.0: USB hub found
[    0.546954] hub 2-0:1.0: 2 ports detected
[    0.548016] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.548498] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.549216] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.549893] hub 3-0:1.0: USB hub found
[    0.550250] hub 3-0:1.0: 2 ports detected
[    0.551399] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.551902] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.552779] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.553495] hub 4-0:1.0: USB hub found
[    0.553937] hub 4-0:1.0: 2 ports detected
[    0.554443] usbcore: registered new interface driver usb-storage
[    0.555007] usbcore: registered new interface driver usbserial_generic
[    0.555604] usbserial: USB Serial support registered for generic
[    0.556126] usbcore: registered new interface driver ftdi_sio
[    0.556646] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.557361] usbcore: registered new interface driver pl2303
[    0.557871] usbserial: USB Serial support registered for pl2303
[    0.558390] i8042: PNP: No PS/2 controller found.
[    0.558860] mousedev: PS/2 mouse device common for all mice
[    0.559546] rtc_cmos 00:04: RTC can wake from S4
[    0.560376] rtc_cmos 00:04: registered as rtc0
[    0.560832] rtc_cmos 00:04: setting system clock to 2023-04-05T19:47:06 UTC (1680724026)
[    0.561537] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.562497] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.563161] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.563658] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.564543] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.565424] intel_pstate: CPU model not supported
[    0.565856] sdhci: Secure Digital Host Controller Interface driver
[    0.566381] sdhci: Copyright(c) Pierre Ossman
[    0.566777] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.567355] usbcore: registered new interface driver usbhid
[    0.567844] usbhid: USB HID core driver
[    0.568193] u32 classifier
[    0.568429]     input device check on
[    0.568747]     Actions configured
[    0.569166] NET: Registered PF_INET6 protocol family
[    0.570369] Segment Routing with IPv6
[    0.570716] In-situ OAM (IOAM) with IPv6
[    0.571079] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.571759] NET: Registered PF_PACKET protocol family
[    0.572217] Bridge firewalling registered
[    0.572578] Key type dns_resolver registered
[    0.573038] NET: Registered PF_VSOCK protocol family
[    0.573807] IPI shorthand broadcast: enabled
[    0.574205] sched_clock: Marking stable (506978772, 66792870)->(817819614, -244047972)
[    0.575068] Loading compiled-in X.509 certificates
[    0.575660] Key type ._fscrypt registered
[    0.576077] Key type .fscrypt registered
[    0.576419] Key type fscrypt-provisioning registered
[    0.577090] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.578193] Key type encrypted registered
[    0.579823] printk: console [netcon0] enabled
[    0.580208] netconsole: network logging started
[    0.782777] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.835688] ata6: SATA link down (SStatus 0 SControl 300)
[    0.836322] ata4: SATA link down (SStatus 0 SControl 300)
[    0.836937] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.837628] ata5: SATA link down (SStatus 0 SControl 300)
[    0.838219] ata2: SATA link down (SStatus 0 SControl 300)
[    0.838787] ata1: SATA link down (SStatus 0 SControl 300)
[    0.839296] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.839789] ata3.00: applying bridge limits
[    0.840276] ata3.00: configured for UDMA/100
[    0.840979] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.875035] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.875670] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.905775] IP-Config: Complete:
[    0.906106]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    0.906973]      host=192.168.7.2, domain=, nis-domain=(none)
[    0.907496]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.907498]      nameserver0=8.8.8.8
[    0.908695] md: Waiting for all devices to be available before autodetect
[    0.909103] md: If you don't use raid, use raid=noautodetect
[    0.909413] md: Autodetecting RAID arrays.
[    0.909649] md: autorun ...
[    0.909819] md: ... autorun DONE.
[    0.911124] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    0.911636] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.912127] devtmpfs: mounted
[    0.913527] Freeing unused kernel image (initmem) memory: 1936K
[    0.915292] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    0.916085] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    0.921798] Write protecting the kernel read-only data: 22528k
[    0.922844] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    0.923362] Freeing unused kernel image (rodata/data gap) memory: 364K
[    0.923811] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    0.979903] udevd[174]: starting version 3.2.11
[    0.985904] udevd[175]: starting eudev-3.2.11
[    1.035312] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.176643] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.229008] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.294957] EXT4-fs (vda): re-mounted. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.7
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.19.17-yocto-standard #1 SMP PREEMPT_DYNAMIC Mon Jan 2 02:57:45 UTC 2023 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr  5 19:47:07 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    1.532773] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCDyWhq9CFdFEj6pXarrhzFqyY5aC9ReqB8U8gS9flnMBQssNBKC/UuFTCtELZhkq7+puvT5GHr8UuOoHocHaENNb4YcZh0JRwIc3zjIGhuYq9Id0R7HwmyDXDdVR6togPMUxm00Io4XjdLLTn8h55avjqUdbdox2X/ogpyZXvIhw12Mymdhi//RSH0VYbYprJADfJSVbvB8sAEPuxCfblHV20PFLKNdv72y9rEk93oR4jxnkD+Gq9ck4AOmNyPTn4foZqIEknmZiNMxBCGgYigFEpQBmmkjCu27G1aeZTQKlwicfsjlVuKbjj+9/dkTWAm3rrjyAGfsBM79YBMgoSZ root@qemux86-64
Fingerprint: SHA256:tFTM3eRA6RlSjCl3MmGPShDpqS7lxN6A7mwACtB2AHU
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    1.645094] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.645427] Bluetooth: BNEP filters: protocol multicast
 * Starting Avah[    1.646103] Bluetooth: BNEP socket layer initialized
i mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.1.3 qemux86-64 /dev/ttyS0

qemux86-64 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-ZInneXfdVV,guid=dc5f0114c287c72ed920bf6b642dd03b
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri3 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
libGL error: glx: failed to create dri2 screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[662]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=664 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[662]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xc00003): BadWindow (invalid Window parameter) (opcode: 12)

(connman-applet:631): Gdk-[1;35mCRITICAL[0m **: [34m19:47:07.513[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
